drm/i915: Add initial bits for VGA modesetting bringup on Sandybridge.
Signed-off-by: Eric Anholt <eric@anholt.net>
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 1b5cd83..ce28f18 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -232,7 +232,7 @@
#define G4X_P2_DISPLAY_PORT_FAST 10
#define G4X_P2_DISPLAY_PORT_LIMIT 0
-/* Ironlake */
+/* Ironlake / Sandybridge */
/* as we calculate clock using (register_value + 2) for
N/M1/M2, so here the range value for them is (actual_value-2).
*/
@@ -690,7 +690,7 @@
struct drm_device *dev = crtc->dev;
const intel_limit_t *limit;
- if (IS_IRONLAKE(dev))
+ if (HAS_PCH_SPLIT(dev))
limit = intel_ironlake_limit(crtc);
else if (IS_G4X(dev)) {
limit = intel_g4x_limit(crtc);
@@ -1371,7 +1371,7 @@
dspcntr &= ~DISPPLANE_TILED;
}
- if (IS_IRONLAKE(dev))
+ if (HAS_PCH_SPLIT(dev))
/* must disable */
dspcntr |= DISPPLANE_TRICKLE_FEED_DISABLE;
@@ -1432,7 +1432,7 @@
u8 sr1;
u32 vga_reg;
- if (IS_IRONLAKE(dev))
+ if (HAS_PCH_SPLIT(dev))
vga_reg = CPU_VGACNTRL;
else
vga_reg = VGACNTRL;
@@ -2116,7 +2116,7 @@
struct drm_display_mode *adjusted_mode)
{
struct drm_device *dev = crtc->dev;
- if (IS_IRONLAKE(dev)) {
+ if (HAS_PCH_SPLIT(dev)) {
/* FDI link clock is fixed at 2.7G */
if (mode->clock * 3 > 27000 * 4)
return MODE_CLOCK_HIGH;
@@ -2983,7 +2983,7 @@
refclk / 1000);
} else if (IS_I9XX(dev)) {
refclk = 96000;
- if (IS_IRONLAKE(dev))
+ if (HAS_PCH_SPLIT(dev))
refclk = 120000; /* 120Mhz refclk */
} else {
refclk = 48000;
@@ -3041,7 +3041,7 @@
}
/* FDI link */
- if (IS_IRONLAKE(dev)) {
+ if (HAS_PCH_SPLIT(dev)) {
int lane, link_bw, bpp;
/* eDP doesn't require FDI link, so just set DP M/N
according to current link config */
@@ -3118,7 +3118,7 @@
* PCH B stepping, previous chipset stepping should be
* ignoring this setting.
*/
- if (IS_IRONLAKE(dev)) {
+ if (HAS_PCH_SPLIT(dev)) {
temp = I915_READ(PCH_DREF_CONTROL);
/* Always enable nonspread source */
temp &= ~DREF_NONSPREAD_SOURCE_MASK;
@@ -3165,7 +3165,7 @@
reduced_clock.m2;
}
- if (!IS_IRONLAKE(dev))
+ if (!HAS_PCH_SPLIT(dev))
dpll = DPLL_VGA_MODE_DIS;
if (IS_I9XX(dev)) {
@@ -3178,7 +3178,7 @@
sdvo_pixel_multiply = adjusted_mode->clock / mode->clock;
if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev))
dpll |= (sdvo_pixel_multiply - 1) << SDVO_MULTIPLIER_SHIFT_HIRES;
- else if (IS_IRONLAKE(dev))
+ else if (HAS_PCH_SPLIT(dev))
dpll |= (sdvo_pixel_multiply - 1) << PLL_REF_SDVO_HDMI_MULTIPLIER_SHIFT;
}
if (is_dp)
@@ -3190,7 +3190,7 @@
else {
dpll |= (1 << (clock.p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT;
/* also FPA1 */
- if (IS_IRONLAKE(dev))
+ if (HAS_PCH_SPLIT(dev))
dpll |= (1 << (clock.p1 - 1)) << DPLL_FPA1_P1_POST_DIV_SHIFT;
if (IS_G4X(dev) && has_reduced_clock)
dpll |= (1 << (reduced_clock.p1 - 1)) << DPLL_FPA1_P1_POST_DIV_SHIFT;
@@ -3209,7 +3209,7 @@
dpll |= DPLLB_LVDS_P2_CLOCK_DIV_14;
break;
}
- if (IS_I965G(dev) && !IS_IRONLAKE(dev))
+ if (IS_I965G(dev) && !HAS_PCH_SPLIT(dev))
dpll |= (6 << PLL_LOAD_PULSE_PHASE_SHIFT);
} else {
if (is_lvds) {
@@ -3243,7 +3243,7 @@
/* Ironlake's plane is forced to pipe, bit 24 is to
enable color space conversion */
- if (!IS_IRONLAKE(dev)) {
+ if (!HAS_PCH_SPLIT(dev)) {
if (pipe == 0)
dspcntr &= ~DISPPLANE_SEL_PIPE_MASK;
else
@@ -3270,14 +3270,14 @@
/* Disable the panel fitter if it was on our pipe */
- if (!IS_IRONLAKE(dev) && intel_panel_fitter_pipe(dev) == pipe)
+ if (!HAS_PCH_SPLIT(dev) && intel_panel_fitter_pipe(dev) == pipe)
I915_WRITE(PFIT_CONTROL, 0);
DRM_DEBUG_KMS("Mode for pipe %c:\n", pipe == 0 ? 'A' : 'B');
drm_mode_debug_printmodeline(mode);
/* assign to Ironlake registers */
- if (IS_IRONLAKE(dev)) {
+ if (HAS_PCH_SPLIT(dev)) {
fp_reg = pch_fp_reg;
dpll_reg = pch_dpll_reg;
}
@@ -3298,7 +3298,7 @@
if (is_lvds) {
u32 lvds;
- if (IS_IRONLAKE(dev))
+ if (HAS_PCH_SPLIT(dev))
lvds_reg = PCH_LVDS;
lvds = I915_READ(lvds_reg);
@@ -3344,7 +3344,7 @@
/* Wait for the clocks to stabilize. */
udelay(150);
- if (IS_I965G(dev) && !IS_IRONLAKE(dev)) {
+ if (IS_I965G(dev) && !HAS_PCH_SPLIT(dev)) {
if (is_sdvo) {
sdvo_pixel_multiply = adjusted_mode->clock / mode->clock;
I915_WRITE(dpll_md_reg, (0 << DPLL_MD_UDI_DIVIDER_SHIFT) |
@@ -3391,14 +3391,14 @@
/* pipesrc and dspsize control the size that is scaled from, which should
* always be the user's requested size.
*/
- if (!IS_IRONLAKE(dev)) {
+ if (!HAS_PCH_SPLIT(dev)) {
I915_WRITE(dspsize_reg, ((mode->vdisplay - 1) << 16) |
(mode->hdisplay - 1));
I915_WRITE(dsppos_reg, 0);
}
I915_WRITE(pipesrc_reg, ((mode->hdisplay - 1) << 16) | (mode->vdisplay - 1));
- if (IS_IRONLAKE(dev)) {
+ if (HAS_PCH_SPLIT(dev)) {
I915_WRITE(data_m1_reg, TU_SIZE(m_n.tu) | m_n.gmch_m);
I915_WRITE(data_n1_reg, TU_SIZE(m_n.tu) | m_n.gmch_n);
I915_WRITE(link_m1_reg, m_n.link_m);
@@ -3419,7 +3419,7 @@
intel_wait_for_vblank(dev);
- if (IS_IRONLAKE(dev)) {
+ if (HAS_PCH_SPLIT(dev)) {
/* enable address swizzle for tiling buffer */
temp = I915_READ(DISP_ARB_CTL);
I915_WRITE(DISP_ARB_CTL, temp | DISP_TILE_SURFACE_SWIZZLING);
@@ -3454,7 +3454,7 @@
return;
/* use legacy palette for Ironlake */
- if (IS_IRONLAKE(dev))
+ if (HAS_PCH_SPLIT(dev))
palreg = (intel_crtc->pipe == 0) ? LGC_PALETTE_A :
LGC_PALETTE_B;
@@ -3937,7 +3937,7 @@
int dpll_reg = (pipe == 0) ? DPLL_A : DPLL_B;
int dpll = I915_READ(dpll_reg);
- if (IS_IRONLAKE(dev))
+ if (HAS_PCH_SPLIT(dev))
return;
if (!dev_priv->lvds_downclock_avail)
@@ -3976,7 +3976,7 @@
int dpll_reg = (pipe == 0) ? DPLL_A : DPLL_B;
int dpll = I915_READ(dpll_reg);
- if (IS_IRONLAKE(dev))
+ if (HAS_PCH_SPLIT(dev))
return;
if (!dev_priv->lvds_downclock_avail)
@@ -4418,7 +4418,7 @@
if (IS_MOBILE(dev) && !IS_I830(dev))
intel_lvds_init(dev);
- if (IS_IRONLAKE(dev)) {
+ if (HAS_PCH_SPLIT(dev)) {
int found;
if (IS_MOBILE(dev) && (I915_READ(DP_A) & DP_DETECTED))
@@ -4487,7 +4487,7 @@
DRM_DEBUG_KMS("probing DP_D\n");
intel_dp_init(dev, DP_D);
}
- } else if (IS_I8XX(dev))
+ } else if (IS_GEN2(dev))
intel_dvo_init(dev);
if (SUPPORTS_TV(dev))
@@ -4716,7 +4716,7 @@
* Disable clock gating reported to work incorrectly according to the
* specs, but enable as much else as we can.
*/
- if (IS_IRONLAKE(dev)) {
+ if (HAS_PCH_SPLIT(dev)) {
return;
} else if (IS_G4X(dev)) {
uint32_t dspclk_gate;
@@ -4789,7 +4789,7 @@
struct drm_i915_private *dev_priv = dev->dev_private;
/* We always want a DPMS function */
- if (IS_IRONLAKE(dev))
+ if (HAS_PCH_SPLIT(dev))
dev_priv->display.dpms = ironlake_crtc_dpms;
else
dev_priv->display.dpms = i9xx_crtc_dpms;
@@ -4832,7 +4832,7 @@
i830_get_display_clock_speed;
/* For FIFO watermark updates */
- if (IS_IRONLAKE(dev))
+ if (HAS_PCH_SPLIT(dev))
dev_priv->display.update_wm = NULL;
else if (IS_G4X(dev))
dev_priv->display.update_wm = g4x_update_wm;