[media] tda18218: re-implement tda18218_wr_regs()
Old i2c message length splitting logic was faulty. Make it better.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
diff --git a/drivers/media/tuners/tda18218.c b/drivers/media/tuners/tda18218.c
index 8a6f9ca..c400440 100644
--- a/drivers/media/tuners/tda18218.c
+++ b/drivers/media/tuners/tda18218.c
@@ -28,8 +28,8 @@
/* write multiple registers */
static int tda18218_wr_regs(struct tda18218_priv *priv, u8 reg, u8 *val, u8 len)
{
- int ret = 0;
- u8 buf[1+len], quotient, remainder, i, msg_len, msg_len_max;
+ int ret = 0, len2, remaining;
+ u8 buf[1 + len];
struct i2c_msg msg[1] = {
{
.addr = priv->cfg->i2c_address,
@@ -38,17 +38,15 @@
}
};
- msg_len_max = priv->cfg->i2c_wr_max - 1;
- quotient = len / msg_len_max;
- remainder = len % msg_len_max;
- msg_len = msg_len_max;
- for (i = 0; (i <= quotient && remainder); i++) {
- if (i == quotient) /* set len of the last msg */
- msg_len = remainder;
+ for (remaining = len; remaining > 0;
+ remaining -= (priv->cfg->i2c_wr_max - 1)) {
+ len2 = remaining;
+ if (len2 > (priv->cfg->i2c_wr_max - 1))
+ len2 = (priv->cfg->i2c_wr_max - 1);
- msg[0].len = msg_len + 1;
- buf[0] = reg + i * msg_len_max;
- memcpy(&buf[1], &val[i * msg_len_max], msg_len);
+ msg[0].len = 1 + len2;
+ buf[0] = reg + len - remaining;
+ memcpy(&buf[1], &val[len - remaining], len2);
ret = i2c_transfer(priv->i2c, msg, 1);
if (ret != 1)