diff --git a/drivers/usb/gadget/f_loopback.c b/drivers/usb/gadget/f_loopback.c
index 83301bd..eb6ddfc 100644
--- a/drivers/usb/gadget/f_loopback.c
+++ b/drivers/usb/gadget/f_loopback.c
@@ -359,7 +359,7 @@
  * loopback_add - add a loopback testing configuration to a device
  * @cdev: the device to support the loopback configuration
  */
-int __init loopback_add(struct usb_composite_dev *cdev)
+int __init loopback_add(struct usb_composite_dev *cdev, bool autoresume)
 {
 	int id;
 
@@ -372,6 +372,10 @@
 	loopback_intf.iInterface = id;
 	loopback_driver.iConfiguration = id;
 
+	/* support autoresume for remote wakeup testing */
+	if (autoresume)
+		sourcesink_driver.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
+
 	/* support OTG systems */
 	if (gadget_is_otg(cdev->gadget)) {
 		loopback_driver.descriptors = otg_desc;
diff --git a/drivers/usb/gadget/f_sourcesink.c b/drivers/usb/gadget/f_sourcesink.c
index 6aca5c8..bffe91d 100644
--- a/drivers/usb/gadget/f_sourcesink.c
+++ b/drivers/usb/gadget/f_sourcesink.c
@@ -59,7 +59,6 @@
 
 	struct usb_ep		*in_ep;
 	struct usb_ep		*out_ep;
-	struct timer_list	resume;
 };
 
 static inline struct f_sourcesink *func_to_ss(struct usb_function *f)
@@ -67,10 +66,6 @@
 	return container_of(f, struct f_sourcesink, function);
 }
 
-static unsigned autoresume;
-module_param(autoresume, uint, 0);
-MODULE_PARM_DESC(autoresume, "zero, or seconds before remote wakeup");
-
 static unsigned pattern;
 module_param(pattern, uint, 0);
 MODULE_PARM_DESC(pattern, "0 = all zeroes, 1 = mod63 ");
@@ -155,21 +150,6 @@
 
 /*-------------------------------------------------------------------------*/
 
-static void sourcesink_autoresume(unsigned long _c)
-{
-	struct usb_composite_dev *cdev = (void *)_c;
-	struct usb_gadget	*g = cdev->gadget;
-
-	/* Normally the host would be woken up for something
-	 * more significant than just a timer firing; likely
-	 * because of some direct user request.
-	 */
-	if (g->speed != USB_SPEED_UNKNOWN) {
-		int status = usb_gadget_wakeup(g);
-		DBG(cdev, "%s --> %d\n", __func__, status);
-	}
-}
-
 static int __init
 sourcesink_bind(struct usb_configuration *c, struct usb_function *f)
 {
@@ -198,9 +178,6 @@
 		goto autoconf_fail;
 	ss->out_ep->driver_data = cdev;	/* claim */
 
-	setup_timer(&ss->resume, sourcesink_autoresume,
-			(unsigned long) c->cdev);
-
 	/* support high speed hardware */
 	if (gadget_is_dualspeed(c->cdev->gadget)) {
 		hs_source_desc.bEndpointAddress =
@@ -359,7 +336,6 @@
 
 	cdev = ss->function.config->cdev;
 	disable_endpoints(cdev, ss->in_ep, ss->out_ep);
-	del_timer(&ss->resume);
 	VDBG(cdev, "%s disabled\n", ss->function.name);
 }
 
@@ -426,30 +402,6 @@
 	disable_source_sink(ss);
 }
 
-static void sourcesink_suspend(struct usb_function *f)
-{
-	struct f_sourcesink	*ss = func_to_ss(f);
-	struct usb_composite_dev *cdev = f->config->cdev;
-
-	if (cdev->gadget->speed == USB_SPEED_UNKNOWN)
-		return;
-
-	if (autoresume) {
-		mod_timer(&ss->resume, jiffies + (HZ * autoresume));
-		DBG(cdev, "suspend, wakeup in %d seconds\n", autoresume);
-	} else
-		DBG(cdev, "%s\n", __func__);
-}
-
-static void sourcesink_resume(struct usb_function *f)
-{
-	struct f_sourcesink	*ss = func_to_ss(f);
-	struct usb_composite_dev *cdev = f->config->cdev;
-
-	DBG(cdev, "%s\n", __func__);
-	del_timer(&ss->resume);
-}
-
 /*-------------------------------------------------------------------------*/
 
 static int __init sourcesink_bind_config(struct usb_configuration *c)
@@ -467,8 +419,6 @@
 	ss->function.unbind = sourcesink_unbind;
 	ss->function.set_alt = sourcesink_set_alt;
 	ss->function.disable = sourcesink_disable;
-	ss->function.suspend = sourcesink_suspend;
-	ss->function.resume = sourcesink_resume;
 
 	status = usb_add_function(c, &ss->function);
 	if (status)
@@ -559,7 +509,7 @@
  * sourcesink_add - add a source/sink testing configuration to a device
  * @cdev: the device to support the configuration
  */
-int __init sourcesink_add(struct usb_composite_dev *cdev)
+int __init sourcesink_add(struct usb_composite_dev *cdev, bool autoresume)
 {
 	int id;
 
diff --git a/drivers/usb/gadget/g_zero.h b/drivers/usb/gadget/g_zero.h
index dd2f16a..e84b3c4 100644
--- a/drivers/usb/gadget/g_zero.h
+++ b/drivers/usb/gadget/g_zero.h
@@ -19,7 +19,7 @@
 		struct usb_ep *in, struct usb_ep *out);
 
 /* configuration-specific linkup */
-int sourcesink_add(struct usb_composite_dev *cdev);
-int loopback_add(struct usb_composite_dev *cdev);
+int sourcesink_add(struct usb_composite_dev *cdev, bool autoresume);
+int loopback_add(struct usb_composite_dev *cdev, bool autoresume);
 
 #endif /* __G_ZERO_H */
diff --git a/drivers/usb/gadget/zero.c b/drivers/usb/gadget/zero.c
index 20614dc..2d77240 100644
--- a/drivers/usb/gadget/zero.c
+++ b/drivers/usb/gadget/zero.c
@@ -102,11 +102,21 @@
 #ifndef	CONFIG_USB_ZERO_HNPTEST
 #define DRIVER_VENDOR_NUM	0x0525		/* NetChip */
 #define DRIVER_PRODUCT_NUM	0xa4a0		/* Linux-USB "Gadget Zero" */
+#define DEFAULT_AUTORESUME	0
 #else
 #define DRIVER_VENDOR_NUM	0x1a0a		/* OTG test device IDs */
 #define DRIVER_PRODUCT_NUM	0xbadd
+#define DEFAULT_AUTORESUME	5
 #endif
 
+/* If the optional "autoresume" mode is enabled, it provides good
+ * functional coverage for the "USBCV" test harness from USB-IF.
+ * It's always set if OTG mode is enabled.
+ */
+unsigned autoresume = DEFAULT_AUTORESUME;
+module_param(autoresume, uint, S_IRUGO);
+MODULE_PARM_DESC(autoresume, "zero, or seconds before remote wakeup");
+
 /*-------------------------------------------------------------------------*/
 
 static struct usb_device_descriptor device_desc = {
@@ -212,6 +222,47 @@
 
 /*-------------------------------------------------------------------------*/
 
+static struct timer_list	autoresume_timer;
+
+static void zero_autoresume(unsigned long _c)
+{
+	struct usb_composite_dev	*cdev = (void *)_c;
+	struct usb_gadget		*g = cdev->gadget;
+
+	/* unconfigured devices can't issue wakeups */
+	if (!cdev->config)
+		return;
+
+	/* Normally the host would be woken up for something
+	 * more significant than just a timer firing; likely
+	 * because of some direct user request.
+	 */
+	if (g->speed != USB_SPEED_UNKNOWN) {
+		int status = usb_gadget_wakeup(g);
+		INFO(cdev, "%s --> %d\n", __func__, status);
+	}
+}
+
+static void zero_suspend(struct usb_composite_dev *cdev)
+{
+	if (cdev->gadget->speed == USB_SPEED_UNKNOWN)
+		return;
+
+	if (autoresume) {
+		mod_timer(&autoresume_timer, jiffies + (HZ * autoresume));
+		DBG(cdev, "suspend, wakeup in %d seconds\n", autoresume);
+	} else
+		DBG(cdev, "%s\n", __func__);
+}
+
+static void zero_resume(struct usb_composite_dev *cdev)
+{
+	DBG(cdev, "%s\n", __func__);
+	del_timer(&autoresume_timer);
+}
+
+/*-------------------------------------------------------------------------*/
+
 static int __init zero_bind(struct usb_composite_dev *cdev)
 {
 	int			gcnum;
@@ -239,17 +290,19 @@
 	strings_dev[STRING_SERIAL_IDX].id = id;
 	device_desc.iSerialNumber = id;
 
+	setup_timer(&autoresume_timer, zero_autoresume, (unsigned long) cdev);
+
 	/* Register primary, then secondary configuration.  Note that
 	 * SH3 only allows one config...
 	 */
 	if (loopdefault) {
-		loopback_add(cdev);
+		loopback_add(cdev, autoresume != 0);
 		if (!gadget_is_sh(gadget))
-			sourcesink_add(cdev);
+			sourcesink_add(cdev, autoresume != 0);
 	} else {
-		sourcesink_add(cdev);
+		sourcesink_add(cdev, autoresume != 0);
 		if (!gadget_is_sh(gadget))
-			loopback_add(cdev);
+			loopback_add(cdev, autoresume != 0);
 	}
 
 	gcnum = usb_gadget_controller_number(gadget);
@@ -278,11 +331,20 @@
 	return 0;
 }
 
+static int zero_unbind(struct usb_composite_dev *cdev)
+{
+	del_timer_sync(&autoresume_timer);
+	return 0;
+}
+
 static struct usb_composite_driver zero_driver = {
 	.name		= "zero",
 	.dev		= &device_desc,
 	.strings	= dev_strings,
 	.bind		= zero_bind,
+	.unbind		= zero_unbind,
+	.suspend	= zero_suspend,
+	.resume		= zero_resume,
 };
 
 MODULE_AUTHOR("David Brownell");