diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 0094f18..17be01e 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -492,6 +492,8 @@
 		struct drm_i915_gem_phys_object *phys_objs[I915_MAX_PHYS_OBJECT];
 	} mm;
 	struct sdvo_device_mapping sdvo_mappings[2];
+	/* indicate whether the LVDS_BORDER should be enabled or not */
+	unsigned int lvds_border_bits;
 
 	/* Reclocking support */
 	bool render_reclock_avail;
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 0466ddb..5f92724 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -968,6 +968,8 @@
 #define   LVDS_PORT_EN			(1 << 31)
 /* Selects pipe B for LVDS data.  Must be set on pre-965. */
 #define   LVDS_PIPEB_SELECT		(1 << 30)
+/* Enable border for unscaled (or aspect-scaled) display */
+#define   LVDS_BORDER_ENABLE		(1 << 15)
 /*
  * Enables the A0-A2 data pairs and CLKA, containing 18 bits of color data per
  * pixel.
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 3c14240..9efe117 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -2936,6 +2936,8 @@
 
 		lvds = I915_READ(lvds_reg);
 		lvds |= LVDS_PORT_EN | LVDS_A0A2_CLKA_POWER_UP | LVDS_PIPEB_SELECT;
+		/* set the corresponsding LVDS_BORDER bit */
+		lvds |= dev_priv->lvds_border_bits;
 		/* Set the B0-B3 data pairs corresponding to whether we're going to
 		 * set the DPLLs for dual-channel mode or not.
 		 */
diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
index 98ae3d7..089f18c 100644
--- a/drivers/gpu/drm/i915/intel_lvds.c
+++ b/drivers/gpu/drm/i915/intel_lvds.c
@@ -380,7 +380,7 @@
 				adjusted_mode->crtc_vblank_start + vsync_pos;
 		/* keep the vsync width constant */
 		adjusted_mode->crtc_vsync_end =
-				adjusted_mode->crtc_vblank_start + vsync_width;
+				adjusted_mode->crtc_vsync_start + vsync_width;
 		border = 1;
 		break;
 	case DRM_MODE_SCALE_ASPECT:
@@ -526,6 +526,14 @@
 	lvds_priv->pfit_control = pfit_control;
 	lvds_priv->pfit_pgm_ratios = pfit_pgm_ratios;
 	/*
+	 * When there exists the border, it means that the LVDS_BORDR
+	 * should be enabled.
+	 */
+	if (border)
+		dev_priv->lvds_border_bits |= LVDS_BORDER_ENABLE;
+	else
+		dev_priv->lvds_border_bits &= ~(LVDS_BORDER_ENABLE);
+	/*
 	 * XXX: It would be nice to support lower refresh rates on the
 	 * panels to reduce power consumption, and perhaps match the
 	 * user's requested refresh rate.