IB/qib: checkpatch fixes
Elminate some simple_strto* usage.
checkpatch also noted pr_ conversations, which have been done as
recommended. The pr_fmt() define is used to shorten line length.
Other multi-line string warnings are also elmininated.
Reviewed-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
diff --git a/drivers/infiniband/hw/qib/qib_iba7220.c b/drivers/infiniband/hw/qib/qib_iba7220.c
index 86a0ba7..64d0ecb 100644
--- a/drivers/infiniband/hw/qib/qib_iba7220.c
+++ b/drivers/infiniband/hw/qib/qib_iba7220.c
@@ -1111,9 +1111,9 @@
sdma_7220_errors(ppd, errs);
if (errs & ~IB_E_BITSEXTANT)
- qib_dev_err(dd, "error interrupt with unknown errors "
- "%llx set\n", (unsigned long long)
- (errs & ~IB_E_BITSEXTANT));
+ qib_dev_err(dd,
+ "error interrupt with unknown errors %llx set\n",
+ (unsigned long long) (errs & ~IB_E_BITSEXTANT));
if (errs & E_SUM_ERRS) {
qib_disarm_7220_senderrbufs(ppd);
@@ -1192,8 +1192,8 @@
}
if (errs & ERR_MASK(ResetNegated)) {
- qib_dev_err(dd, "Got reset, requires re-init "
- "(unload and reload driver)\n");
+ qib_dev_err(dd,
+ "Got reset, requires re-init (unload and reload driver)\n");
dd->flags &= ~QIB_INITTED; /* needs re-init */
/* mark as having had error */
*dd->devstatusp |= QIB_STATUS_HWERROR;
@@ -1305,8 +1305,8 @@
if (!hwerrs)
goto bail;
if (hwerrs == ~0ULL) {
- qib_dev_err(dd, "Read of hardware error status failed "
- "(all bits set); ignoring\n");
+ qib_dev_err(dd,
+ "Read of hardware error status failed (all bits set); ignoring\n");
goto bail;
}
qib_stats.sps_hwerrs++;
@@ -1329,13 +1329,14 @@
qib_inc_eeprom_err(dd, log_idx, 1);
if (hwerrs & ~(TXEMEMPARITYERR_PIOBUF | TXEMEMPARITYERR_PIOPBC |
RXE_PARITY))
- qib_devinfo(dd->pcidev, "Hardware error: hwerr=0x%llx "
- "(cleared)\n", (unsigned long long) hwerrs);
+ qib_devinfo(dd->pcidev,
+ "Hardware error: hwerr=0x%llx (cleared)\n",
+ (unsigned long long) hwerrs);
if (hwerrs & ~IB_HWE_BITSEXTANT)
- qib_dev_err(dd, "hwerror interrupt with unknown errors "
- "%llx set\n", (unsigned long long)
- (hwerrs & ~IB_HWE_BITSEXTANT));
+ qib_dev_err(dd,
+ "hwerror interrupt with unknown errors %llx set\n",
+ (unsigned long long) (hwerrs & ~IB_HWE_BITSEXTANT));
if (hwerrs & QLOGIC_IB_HWE_IB_UC_MEMORYPARITYERR)
qib_sd7220_clr_ibpar(dd);
@@ -1362,8 +1363,9 @@
if (hwerrs & HWE_MASK(PowerOnBISTFailed)) {
isfatal = 1;
- strlcat(msg, "[Memory BIST test failed, "
- "InfiniPath hardware unusable]", msgl);
+ strlcat(msg,
+ "[Memory BIST test failed, InfiniPath hardware unusable]",
+ msgl);
/* ignore from now on, so disable until driver reloaded */
dd->cspec->hwerrmask &= ~HWE_MASK(PowerOnBISTFailed);
qib_write_kreg(dd, kr_hwerrmask, dd->cspec->hwerrmask);
@@ -1409,8 +1411,9 @@
qib_dev_err(dd, "%s hardware error\n", msg);
if (isfatal && !dd->diag_client) {
- qib_dev_err(dd, "Fatal Hardware Error, no longer"
- " usable, SN %.16s\n", dd->serial);
+ qib_dev_err(dd,
+ "Fatal Hardware Error, no longer usable, SN %.16s\n",
+ dd->serial);
/*
* For /sys status file and user programs to print; if no
* trailing brace is copied, we'll know it was truncated.
@@ -1918,8 +1921,9 @@
qib_stats.sps_errints++;
estat = qib_read_kreg64(dd, kr_errstatus);
if (!estat)
- qib_devinfo(dd->pcidev, "error interrupt (%Lx), "
- "but no error bits set!\n", istat);
+ qib_devinfo(dd->pcidev,
+ "error interrupt (%Lx), but no error bits set!\n",
+ istat);
else
handle_7220_errors(dd, estat);
}
@@ -2023,17 +2027,18 @@
static void qib_setup_7220_interrupt(struct qib_devdata *dd)
{
if (!dd->cspec->irq)
- qib_dev_err(dd, "irq is 0, BIOS error? Interrupts won't "
- "work\n");
+ qib_dev_err(dd,
+ "irq is 0, BIOS error? Interrupts won't work\n");
else {
int ret = request_irq(dd->cspec->irq, qib_7220intr,
dd->msi_lo ? 0 : IRQF_SHARED,
QIB_DRV_NAME, dd);
if (ret)
- qib_dev_err(dd, "Couldn't setup %s interrupt "
- "(irq=%d): %d\n", dd->msi_lo ?
- "MSI" : "INTx", dd->cspec->irq, ret);
+ qib_dev_err(dd,
+ "Couldn't setup %s interrupt (irq=%d): %d\n",
+ dd->msi_lo ? "MSI" : "INTx",
+ dd->cspec->irq, ret);
}
}
@@ -2072,9 +2077,9 @@
snprintf(dd->boardname, namelen, "%s", n);
if (dd->majrev != 5 || !dd->minrev || dd->minrev > 2)
- qib_dev_err(dd, "Unsupported InfiniPath hardware "
- "revision %u.%u!\n",
- dd->majrev, dd->minrev);
+ qib_dev_err(dd,
+ "Unsupported InfiniPath hardware revision %u.%u!\n",
+ dd->majrev, dd->minrev);
snprintf(dd->boardversion, sizeof(dd->boardversion),
"ChipABI %u.%u, %s, InfiniPath%u %u.%u, SW Compat %u\n",
@@ -2146,8 +2151,8 @@
bail:
if (ret) {
if (qib_pcie_params(dd, dd->lbus_width, NULL, NULL))
- qib_dev_err(dd, "Reset failed to setup PCIe or "
- "interrupts; continuing anyway\n");
+ qib_dev_err(dd,
+ "Reset failed to setup PCIe or interrupts; continuing anyway\n");
/* hold IBC in reset, no sends, etc till later */
qib_write_kreg(dd, kr_control, 0ULL);
@@ -2187,8 +2192,9 @@
return;
}
if (chippa >= (1UL << IBA7220_TID_SZ_SHIFT)) {
- qib_dev_err(dd, "Physical page address 0x%lx "
- "larger than supported\n", pa);
+ qib_dev_err(dd,
+ "Physical page address 0x%lx larger than supported\n",
+ pa);
return;
}
@@ -2706,8 +2712,9 @@
ppd->cpspec->ibcctrl &= ~SYM_MASK(IBCCtrl, Loopback);
/* enable heart beat again */
val = IBA7220_IBC_HRTBT_MASK << IBA7220_IBC_HRTBT_SHIFT;
- qib_devinfo(ppd->dd->pcidev, "Disabling IB%u:%u IBC loopback "
- "(normal)\n", ppd->dd->unit, ppd->port);
+ qib_devinfo(ppd->dd->pcidev,
+ "Disabling IB%u:%u IBC loopback (normal)\n",
+ ppd->dd->unit, ppd->port);
} else
ret = -EINVAL;
if (!ret) {
@@ -3307,8 +3314,8 @@
if (!dd->msi_lo)
return 0;
- qib_devinfo(dd->pcidev, "MSI interrupt not detected,"
- " trying INTx interrupts\n");
+ qib_devinfo(dd->pcidev,
+ "MSI interrupt not detected, trying INTx interrupts\n");
qib_7220_free_irq(dd);
qib_enable_intx(dd->pcidev);
/*
@@ -3980,11 +3987,10 @@
qib_write_kreg(dd, kr_sendpioavailaddr, dd->pioavailregs_phys);
val = qib_read_kreg64(dd, kr_sendpioavailaddr);
if (val != dd->pioavailregs_phys) {
- qib_dev_err(dd, "Catastrophic software error, "
- "SendPIOAvailAddr written as %lx, "
- "read back as %llx\n",
- (unsigned long) dd->pioavailregs_phys,
- (unsigned long long) val);
+ qib_dev_err(dd,
+ "Catastrophic software error, SendPIOAvailAddr written as %lx, read back as %llx\n",
+ (unsigned long) dd->pioavailregs_phys,
+ (unsigned long long) val);
ret = -EINVAL;
}
qib_register_observer(dd, &sendctrl_observer);
@@ -4014,8 +4020,8 @@
dd->revision = readq(&dd->kregbase[kr_revision]);
if ((dd->revision & 0xffffffffU) == 0xffffffffU) {
- qib_dev_err(dd, "Revision register read failure, "
- "giving up initialization\n");
+ qib_dev_err(dd,
+ "Revision register read failure, giving up initialization\n");
ret = -ENODEV;
goto bail;
}
@@ -4613,8 +4619,8 @@
break;
}
if (qib_pcie_params(dd, minwidth, NULL, NULL))
- qib_dev_err(dd, "Failed to setup PCIe or interrupts; "
- "continuing anyway\n");
+ qib_dev_err(dd,
+ "Failed to setup PCIe or interrupts; continuing anyway\n");
/* save IRQ for possible later use */
dd->cspec->irq = pdev->irq;