diff --git a/drivers/net/can/pch_can.c b/drivers/net/can/pch_can.c
index e54712b..d11fbb2 100644
--- a/drivers/net/can/pch_can.c
+++ b/drivers/net/can/pch_can.c
@@ -653,7 +653,7 @@
 	u16 data_reg;
 
 	do {
-		/* Reading the messsage object from the Message RAM */
+		/* Reading the message object from the Message RAM */
 		iowrite32(PCH_CMASK_RX_TX_GET, &priv->regs->ifregs[0].cmask);
 		pch_can_rw_msg_obj(&priv->regs->ifregs[0].creq, obj_num);
 
diff --git a/drivers/net/irda/ali-ircc.c b/drivers/net/irda/ali-ircc.c
index 872183f..d532dde 100644
--- a/drivers/net/irda/ali-ircc.c
+++ b/drivers/net/irda/ali-ircc.c
@@ -1800,7 +1800,7 @@
 	MessageCount = inb(iobase+ FIR_LSR)&0x07;
 	
 	if (MessageCount > 0)	
-		IRDA_DEBUG(0, "%s(), Messsage count = %d,\n", __func__ , MessageCount);
+		IRDA_DEBUG(0, "%s(), Message count = %d,\n", __func__ , MessageCount);
 		
 	for (i=0; i<=MessageCount; i++)
 	{
diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c
index 337bdcd..665c3d8 100644
--- a/drivers/net/s2io.c
+++ b/drivers/net/s2io.c
@@ -7231,7 +7231,7 @@
 		/* As per the HW requirement we need to replenish the
 		 * receive buffer to avoid the ring bump. Since there is
 		 * no intention of processing the Rx frame at this pointwe are
-		 * just settting the ownership bit of rxd in Each Rx
+		 * just setting the ownership bit of rxd in Each Rx
 		 * ring to HW and set the appropriate buffer size
 		 * based on the ring mode
 		 */
diff --git a/drivers/net/ucc_geth_ethtool.c b/drivers/net/ucc_geth_ethtool.c
index 6f92e48..cfd8881 100644
--- a/drivers/net/ucc_geth_ethtool.c
+++ b/drivers/net/ucc_geth_ethtool.c
@@ -6,7 +6,7 @@
  * Author: Li Yang <leoli@freescale.com>
  *
  * Limitation:
- * Can only get/set setttings of the first queue.
+ * Can only get/set settings of the first queue.
  * Need to re-open the interface manually after changing some parameters.
  *
  * This program is free software; you can redistribute  it and/or modify it
diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c
index 069c1cf..fef9ecc 100644
--- a/drivers/net/usb/usbnet.c
+++ b/drivers/net/usb/usbnet.c
@@ -109,7 +109,7 @@
 
 		/* take the first altsetting with in-bulk + out-bulk;
 		 * remember any status endpoint, just in case;
-		 * ignore other endpoints and altsetttings.
+		 * ignore other endpoints and altsettings.
 		 */
 		for (ep = 0; ep < alt->desc.bNumEndpoints; ep++) {
 			struct usb_host_endpoint	*e;
diff --git a/drivers/net/wan/pc300_drv.c b/drivers/net/wan/pc300_drv.c
index f875cfa..737b59f 100644
--- a/drivers/net/wan/pc300_drv.c
+++ b/drivers/net/wan/pc300_drv.c
@@ -1445,7 +1445,7 @@
  * Description:	In the remote loopback mode the clock and data recovered
  *		from the line inputs RL1/2 or RDIP/RDIN are routed back
  *		to the line outputs XL1/2 or XDOP/XDON via the analog
- *		transmitter. As in normal mode they are processsed by
+ *		transmitter. As in normal mode they are processed by
  *		the synchronizer and then sent to the system interface.
  *----------------------------------------------------------------------------
  */
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
index 6eadf97..aa1ba5d 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
@@ -3329,26 +3329,26 @@
 	else
 		cptr = AR9300_BASE_ADDR;
 	ath_dbg(common, ATH_DBG_EEPROM,
-		"Trying EEPROM accesss at Address 0x%04x\n", cptr);
+		"Trying EEPROM access at Address 0x%04x\n", cptr);
 	if (ar9300_check_eeprom_header(ah, read, cptr))
 		goto found;
 
 	cptr = AR9300_BASE_ADDR_512;
 	ath_dbg(common, ATH_DBG_EEPROM,
-		"Trying EEPROM accesss at Address 0x%04x\n", cptr);
+		"Trying EEPROM access at Address 0x%04x\n", cptr);
 	if (ar9300_check_eeprom_header(ah, read, cptr))
 		goto found;
 
 	read = ar9300_read_otp;
 	cptr = AR9300_BASE_ADDR;
 	ath_dbg(common, ATH_DBG_EEPROM,
-		"Trying OTP accesss at Address 0x%04x\n", cptr);
+		"Trying OTP access at Address 0x%04x\n", cptr);
 	if (ar9300_check_eeprom_header(ah, read, cptr))
 		goto found;
 
 	cptr = AR9300_BASE_ADDR_512;
 	ath_dbg(common, ATH_DBG_EEPROM,
-		"Trying OTP accesss at Address 0x%04x\n", cptr);
+		"Trying OTP access at Address 0x%04x\n", cptr);
 	if (ar9300_check_eeprom_header(ah, read, cptr))
 		goto found;
 
diff --git a/drivers/net/wireless/ipw2x00/ipw2200.c b/drivers/net/wireless/ipw2x00/ipw2200.c
index 42c3fe3..87813c3 100644
--- a/drivers/net/wireless/ipw2x00/ipw2200.c
+++ b/drivers/net/wireless/ipw2x00/ipw2200.c
@@ -7430,7 +7430,7 @@
 		priv->assoc_request.capability &=
 		    ~cpu_to_le16(WLAN_CAPABILITY_SHORT_SLOT_TIME);
 
-	IPW_DEBUG_ASSOC("%sssocation attempt: '%s', channel %d, "
+	IPW_DEBUG_ASSOC("%ssociation attempt: '%s', channel %d, "
 			"802.11%c [%d], %s[:%s], enc=%s%s%s%c%c\n",
 			roaming ? "Rea" : "A",
 			print_ssid(ssid, priv->essid, priv->essid_len),