diff --git a/include/linux/cyclades.h b/include/linux/cyclades.h
index a5049ea..19ae518 100644
--- a/include/linux/cyclades.h
+++ b/include/linux/cyclades.h
@@ -63,434 +63,11 @@
  *
  *
  */
-
 #ifndef _LINUX_CYCLADES_H
 #define _LINUX_CYCLADES_H
 
-#include <linux/types.h>
-
-struct cyclades_monitor {
-        unsigned long           int_count;
-        unsigned long           char_count;
-        unsigned long           char_max;
-        unsigned long           char_last;
-};
-
-/*
- * These stats all reflect activity since the device was last initialized.
- * (i.e., since the port was opened with no other processes already having it
- * open)
- */
-struct cyclades_idle_stats {
-    __kernel_time_t in_use;	/* Time device has been in use (secs) */
-    __kernel_time_t recv_idle;	/* Time since last char received (secs) */
-    __kernel_time_t xmit_idle;	/* Time since last char transmitted (secs) */
-    unsigned long  recv_bytes;	/* Bytes received */
-    unsigned long  xmit_bytes;	/* Bytes transmitted */
-    unsigned long  overruns;	/* Input overruns */
-    unsigned long  frame_errs;	/* Input framing errors */
-    unsigned long  parity_errs;	/* Input parity errors */
-};
-
-#define CYCLADES_MAGIC  0x4359
-
-#define CYGETMON                0x435901
-#define CYGETTHRESH             0x435902
-#define CYSETTHRESH             0x435903
-#define CYGETDEFTHRESH          0x435904
-#define CYSETDEFTHRESH          0x435905
-#define CYGETTIMEOUT            0x435906
-#define CYSETTIMEOUT            0x435907
-#define CYGETDEFTIMEOUT         0x435908
-#define CYSETDEFTIMEOUT         0x435909
-#define CYSETRFLOW		0x43590a
-#define CYGETRFLOW		0x43590b
-#define CYSETRTSDTR_INV		0x43590c
-#define CYGETRTSDTR_INV		0x43590d
-#define CYZSETPOLLCYCLE		0x43590e
-#define CYZGETPOLLCYCLE		0x43590f
-#define CYGETCD1400VER		0x435910
-#define	CYSETWAIT		0x435912
-#define	CYGETWAIT		0x435913
-
-/*************** CYCLOM-Z ADDITIONS ***************/
-
-#define CZIOC           ('M' << 8)
-#define CZ_NBOARDS      (CZIOC|0xfa)
-#define CZ_BOOT_START   (CZIOC|0xfb)
-#define CZ_BOOT_DATA    (CZIOC|0xfc)
-#define CZ_BOOT_END     (CZIOC|0xfd)
-#define CZ_TEST         (CZIOC|0xfe)
-
-#define CZ_DEF_POLL	(HZ/25)
-
-#define MAX_BOARD       4       /* Max number of boards */
-#define MAX_DEV         256     /* Max number of ports total */
-#define	CYZ_MAX_SPEED	921600
-
-#define	CYZ_FIFO_SIZE	16
-
-#define CYZ_BOOT_NWORDS 0x100
-struct CYZ_BOOT_CTRL {
-        unsigned short  nboard;
-        int             status[MAX_BOARD];
-        int             nchannel[MAX_BOARD];
-        int             fw_rev[MAX_BOARD];
-        unsigned long   offset;
-        unsigned long   data[CYZ_BOOT_NWORDS];
-};
-
-
-#ifndef DP_WINDOW_SIZE
-/*
- *	Memory Window Sizes
- */
-
-#define	DP_WINDOW_SIZE		(0x00080000)	/* window size 512 Kb */
-#define	ZE_DP_WINDOW_SIZE	(0x00100000)	/* window size 1 Mb (Ze and
-						  8Zo V.2 */
-#define	CTRL_WINDOW_SIZE	(0x00000080)	/* runtime regs 128 bytes */
-
-/*
- *	CUSTOM_REG - Cyclom-Z/PCI Custom Registers Set. The driver
- *	normally will access only interested on the fpga_id, fpga_version,
- *	start_cpu and stop_cpu.
- */
-
-struct	CUSTOM_REG {
-	__u32	fpga_id;		/* FPGA Identification Register */
-	__u32	fpga_version;		/* FPGA Version Number Register */
-	__u32	cpu_start;		/* CPU start Register (write) */
-	__u32	cpu_stop;		/* CPU stop Register (write) */
-	__u32	misc_reg;		/* Miscellaneous Register */
-	__u32	idt_mode;		/* IDT mode Register */
-	__u32	uart_irq_status;	/* UART IRQ status Register */
-	__u32	clear_timer0_irq;	/* Clear timer interrupt Register */
-	__u32	clear_timer1_irq;	/* Clear timer interrupt Register */
-	__u32	clear_timer2_irq;	/* Clear timer interrupt Register */
-	__u32	test_register;		/* Test Register */
-	__u32	test_count;		/* Test Count Register */
-	__u32	timer_select;		/* Timer select register */
-	__u32	pr_uart_irq_status;	/* Prioritized UART IRQ stat Reg */
-	__u32	ram_wait_state;		/* RAM wait-state Register */
-	__u32	uart_wait_state;	/* UART wait-state Register */
-	__u32	timer_wait_state;	/* timer wait-state Register */
-	__u32	ack_wait_state;		/* ACK wait State Register */
-};
-
-/*
- *	RUNTIME_9060 - PLX PCI9060ES local configuration and shared runtime
- *	registers. This structure can be used to access the 9060 registers
- *	(memory mapped).
- */
-
-struct RUNTIME_9060 {
-	__u32	loc_addr_range;	/* 00h - Local Address Range */
-	__u32	loc_addr_base;	/* 04h - Local Address Base */
-	__u32	loc_arbitr;	/* 08h - Local Arbitration */
-	__u32	endian_descr;	/* 0Ch - Big/Little Endian Descriptor */
-	__u32	loc_rom_range;	/* 10h - Local ROM Range */
-	__u32	loc_rom_base;	/* 14h - Local ROM Base */
-	__u32	loc_bus_descr;	/* 18h - Local Bus descriptor */
-	__u32	loc_range_mst;	/* 1Ch - Local Range for Master to PCI */
-	__u32	loc_base_mst;	/* 20h - Local Base for Master PCI */
-	__u32	loc_range_io;	/* 24h - Local Range for Master IO */
-	__u32	pci_base_mst;	/* 28h - PCI Base for Master PCI */
-	__u32	pci_conf_io;	/* 2Ch - PCI configuration for Master IO */
-	__u32	filler1;	/* 30h */
-	__u32	filler2;	/* 34h */
-	__u32	filler3;	/* 38h */
-	__u32	filler4;	/* 3Ch */
-	__u32	mail_box_0;	/* 40h - Mail Box 0 */
-	__u32	mail_box_1;	/* 44h - Mail Box 1 */
-	__u32	mail_box_2;	/* 48h - Mail Box 2 */
-	__u32	mail_box_3;	/* 4Ch - Mail Box 3 */
-	__u32	filler5;	/* 50h */
-	__u32	filler6;	/* 54h */
-	__u32	filler7;	/* 58h */
-	__u32	filler8;	/* 5Ch */
-	__u32	pci_doorbell;	/* 60h - PCI to Local Doorbell */
-	__u32	loc_doorbell;	/* 64h - Local to PCI Doorbell */
-	__u32	intr_ctrl_stat;	/* 68h - Interrupt Control/Status */
-	__u32	init_ctrl;	/* 6Ch - EEPROM control, Init Control, etc */
-};
-
-/* Values for the Local Base Address re-map register */
-
-#define	WIN_RAM		0x00000001L	/* set the sliding window to RAM */
-#define	WIN_CREG	0x14000001L	/* set the window to custom Registers */
-
-/* Values timer select registers */
-
-#define	TIMER_BY_1M	0x00		/* clock divided by 1M */
-#define	TIMER_BY_256K	0x01		/* clock divided by 256k */
-#define	TIMER_BY_128K	0x02		/* clock divided by 128k */
-#define	TIMER_BY_32K	0x03		/* clock divided by 32k */
-
-/****************** ****************** *******************/
-#endif
-
-#ifndef ZFIRM_ID
-/* #include "zfwint.h" */
-/****************** ****************** *******************/
-/*
- *	This file contains the definitions for interfacing with the
- *	Cyclom-Z ZFIRM Firmware.
- */
-
-/* General Constant definitions */
-
-#define	MAX_CHAN	64		/* max number of channels per board */
-
-/* firmware id structure (set after boot) */
-
-#define ID_ADDRESS	0x00000180L	/* signature/pointer address */
-#define	ZFIRM_ID	0x5557465AL	/* ZFIRM/U signature */
-#define	ZFIRM_HLT	0x59505B5CL	/* ZFIRM needs external power supply */
-#define	ZFIRM_RST	0x56040674L	/* RST signal (due to FW reset) */
-
-#define	ZF_TINACT_DEF	1000		/* default inactivity timeout 
-					   (1000 ms) */
-#define	ZF_TINACT	ZF_TINACT_DEF
-
-struct	FIRM_ID {
-	__u32	signature;		/* ZFIRM/U signature */
-	__u32	zfwctrl_addr;		/* pointer to ZFW_CTRL structure */
-};
-
-/* Op. System id */
-
-#define	C_OS_LINUX	0x00000030	/* generic Linux system */
-
-/* channel op_mode */
-
-#define	C_CH_DISABLE	0x00000000	/* channel is disabled */
-#define	C_CH_TXENABLE	0x00000001	/* channel Tx enabled */
-#define	C_CH_RXENABLE	0x00000002	/* channel Rx enabled */
-#define	C_CH_ENABLE	0x00000003	/* channel Tx/Rx enabled */
-#define	C_CH_LOOPBACK	0x00000004	/* Loopback mode */
-
-/* comm_parity - parity */
-
-#define	C_PR_NONE	0x00000000	/* None */
-#define	C_PR_ODD	0x00000001	/* Odd */
-#define C_PR_EVEN	0x00000002	/* Even */
-#define C_PR_MARK	0x00000004	/* Mark */
-#define C_PR_SPACE	0x00000008	/* Space */
-#define C_PR_PARITY	0x000000ff
-
-#define	C_PR_DISCARD	0x00000100	/* discard char with frame/par error */
-#define C_PR_IGNORE	0x00000200	/* ignore frame/par error */
-
-/* comm_data_l - data length and stop bits */
-
-#define C_DL_CS5	0x00000001
-#define C_DL_CS6	0x00000002
-#define C_DL_CS7	0x00000004
-#define C_DL_CS8	0x00000008
-#define	C_DL_CS		0x0000000f
-#define C_DL_1STOP	0x00000010
-#define C_DL_15STOP	0x00000020
-#define C_DL_2STOP	0x00000040
-#define	C_DL_STOP	0x000000f0
-
-/* interrupt enabling/status */
-
-#define	C_IN_DISABLE	0x00000000	/* zero, disable interrupts */
-#define	C_IN_TXBEMPTY	0x00000001	/* tx buffer empty */
-#define	C_IN_TXLOWWM	0x00000002	/* tx buffer below LWM */
-#define	C_IN_RXHIWM	0x00000010	/* rx buffer above HWM */
-#define	C_IN_RXNNDT	0x00000020	/* rx no new data timeout */
-#define	C_IN_MDCD	0x00000100	/* modem DCD change */
-#define	C_IN_MDSR	0x00000200	/* modem DSR change */
-#define	C_IN_MRI	0x00000400	/* modem RI change */
-#define	C_IN_MCTS	0x00000800	/* modem CTS change */
-#define	C_IN_RXBRK	0x00001000	/* Break received */
-#define	C_IN_PR_ERROR	0x00002000	/* parity error */
-#define	C_IN_FR_ERROR	0x00004000	/* frame error */
-#define C_IN_OVR_ERROR  0x00008000      /* overrun error */
-#define C_IN_RXOFL	0x00010000      /* RX buffer overflow */
-#define C_IN_IOCTLW	0x00020000      /* I/O control w/ wait */
-#define C_IN_MRTS	0x00040000	/* modem RTS drop */
-#define C_IN_ICHAR	0x00080000
- 
-/* flow control */
-
-#define	C_FL_OXX	0x00000001	/* output Xon/Xoff flow control */
-#define	C_FL_IXX	0x00000002	/* output Xon/Xoff flow control */
-#define C_FL_OIXANY	0x00000004	/* output Xon/Xoff (any xon) */
-#define	C_FL_SWFLOW	0x0000000f
-
-/* flow status */
-
-#define	C_FS_TXIDLE	0x00000000	/* no Tx data in the buffer or UART */
-#define	C_FS_SENDING	0x00000001	/* UART is sending data */
-#define	C_FS_SWFLOW	0x00000002	/* Tx is stopped by received Xoff */
-
-/* rs_control/rs_status RS-232 signals */
-
-#define C_RS_PARAM	0x80000000	/* Indicates presence of parameter in 
-					   IOCTLM command */
-#define	C_RS_RTS	0x00000001	/* RTS */
-#define	C_RS_DTR	0x00000004	/* DTR */
-#define	C_RS_DCD	0x00000100	/* CD */
-#define	C_RS_DSR	0x00000200	/* DSR */
-#define	C_RS_RI		0x00000400	/* RI */
-#define	C_RS_CTS	0x00000800	/* CTS */
-
-/* commands Host <-> Board */
-
-#define	C_CM_RESET	0x01		/* reset/flush buffers */
-#define	C_CM_IOCTL	0x02		/* re-read CH_CTRL */
-#define	C_CM_IOCTLW	0x03		/* re-read CH_CTRL, intr when done */
-#define	C_CM_IOCTLM	0x04		/* RS-232 outputs change */
-#define	C_CM_SENDXOFF	0x10		/* send Xoff */
-#define	C_CM_SENDXON	0x11		/* send Xon */
-#define C_CM_CLFLOW	0x12		/* Clear flow control (resume) */
-#define	C_CM_SENDBRK	0x41		/* send break */
-#define	C_CM_INTBACK	0x42		/* Interrupt back */
-#define	C_CM_SET_BREAK	0x43		/* Tx break on */
-#define	C_CM_CLR_BREAK	0x44		/* Tx break off */
-#define	C_CM_CMD_DONE	0x45		/* Previous command done */
-#define C_CM_INTBACK2	0x46		/* Alternate Interrupt back */
-#define	C_CM_TINACT	0x51		/* set inactivity detection */
-#define	C_CM_IRQ_ENBL	0x52		/* enable generation of interrupts */
-#define	C_CM_IRQ_DSBL	0x53		/* disable generation of interrupts */
-#define	C_CM_ACK_ENBL	0x54		/* enable acknowledged interrupt mode */
-#define	C_CM_ACK_DSBL	0x55		/* disable acknowledged intr mode */
-#define	C_CM_FLUSH_RX	0x56		/* flushes Rx buffer */
-#define	C_CM_FLUSH_TX	0x57		/* flushes Tx buffer */
-#define C_CM_Q_ENABLE	0x58		/* enables queue access from the 
-					   driver */
-#define C_CM_Q_DISABLE  0x59            /* disables queue access from the 
-					   driver */
-
-#define	C_CM_TXBEMPTY	0x60		/* Tx buffer is empty */
-#define	C_CM_TXLOWWM	0x61		/* Tx buffer low water mark */
-#define	C_CM_RXHIWM	0x62		/* Rx buffer high water mark */
-#define	C_CM_RXNNDT	0x63		/* rx no new data timeout */
-#define	C_CM_TXFEMPTY	0x64
-#define	C_CM_ICHAR	0x65
-#define	C_CM_MDCD	0x70		/* modem DCD change */
-#define	C_CM_MDSR	0x71		/* modem DSR change */
-#define	C_CM_MRI	0x72		/* modem RI change */
-#define	C_CM_MCTS	0x73		/* modem CTS change */
-#define C_CM_MRTS	0x74		/* modem RTS drop */
-#define	C_CM_RXBRK	0x84		/* Break received */
-#define	C_CM_PR_ERROR	0x85		/* Parity error */
-#define	C_CM_FR_ERROR	0x86		/* Frame error */
-#define C_CM_OVR_ERROR  0x87            /* Overrun error */
-#define C_CM_RXOFL	0x88            /* RX buffer overflow */
-#define	C_CM_CMDERROR	0x90		/* command error */
-#define	C_CM_FATAL	0x91		/* fatal error */
-#define	C_CM_HW_RESET	0x92		/* reset board */
-
-/*
- *	CH_CTRL - This per port structure contains all parameters
- *	that control an specific port. It can be seen as the
- *	configuration registers of a "super-serial-controller".
- */
-
-struct CH_CTRL {
-	__u32	op_mode;	/* operation mode */
-	__u32	intr_enable;	/* interrupt masking */
-	__u32	sw_flow;	/* SW flow control */
-	__u32	flow_status;	/* output flow status */
-	__u32	comm_baud;	/* baud rate  - numerically specified */
-	__u32	comm_parity;	/* parity */
-	__u32	comm_data_l;	/* data length/stop */
-	__u32	comm_flags;	/* other flags */
-	__u32	hw_flow;	/* HW flow control */
-	__u32	rs_control;	/* RS-232 outputs */
-	__u32	rs_status;	/* RS-232 inputs */
-	__u32	flow_xon;	/* xon char */
-	__u32	flow_xoff;	/* xoff char */
-	__u32	hw_overflow;	/* hw overflow counter */
-	__u32	sw_overflow;	/* sw overflow counter */
-	__u32	comm_error;	/* frame/parity error counter */
-	__u32 ichar;
-	__u32 filler[7];
-};
-
-
-/*
- *	BUF_CTRL - This per channel structure contains
- *	all Tx and Rx buffer control for a given channel.
- */
-
-struct	BUF_CTRL	{
-	__u32	flag_dma;	/* buffers are in Host memory */
-	__u32	tx_bufaddr;	/* address of the tx buffer */
-	__u32	tx_bufsize;	/* tx buffer size */
-	__u32	tx_threshold;	/* tx low water mark */
-	__u32	tx_get;		/* tail index tx buf */
-	__u32	tx_put;		/* head index tx buf */
-	__u32	rx_bufaddr;	/* address of the rx buffer */
-	__u32	rx_bufsize;	/* rx buffer size */
-	__u32	rx_threshold;	/* rx high water mark */
-	__u32	rx_get;		/* tail index rx buf */
-	__u32	rx_put;		/* head index rx buf */
-	__u32	filler[5];	/* filler to align structures */
-};
-
-/*
- *	BOARD_CTRL - This per board structure contains all global 
- *	control fields related to the board.
- */
-
-struct BOARD_CTRL {
-
-	/* static info provided by the on-board CPU */
-	__u32	n_channel;	/* number of channels */
-	__u32	fw_version;	/* firmware version */
-
-	/* static info provided by the driver */
-	__u32	op_system;	/* op_system id */
-	__u32	dr_version;	/* driver version */
-
-	/* board control area */
-	__u32	inactivity;	/* inactivity control */
-
-	/* host to FW commands */
-	__u32	hcmd_channel;	/* channel number */
-	__u32	hcmd_param;	/* pointer to parameters */
-
-	/* FW to Host commands */
-	__u32	fwcmd_channel;	/* channel number */
-	__u32	fwcmd_param;	/* pointer to parameters */
-	__u32	zf_int_queue_addr; /* offset for INT_QUEUE structure */
-
-	/* filler so the structures are aligned */
-	__u32	filler[6];
-};
-
-/* Host Interrupt Queue */
-
-#define QUEUE_SIZE	(10*MAX_CHAN)
-
-struct	INT_QUEUE {
-	unsigned char	intr_code[QUEUE_SIZE];
-	unsigned long	channel[QUEUE_SIZE];
-	unsigned long	param[QUEUE_SIZE];
-	unsigned long	put;
-	unsigned long	get;
-};
-
-/*
- *	ZFW_CTRL - This is the data structure that includes all other
- *	data structures used by the Firmware.
- */
- 
-struct ZFW_CTRL {
-	struct BOARD_CTRL	board_ctrl;
-	struct CH_CTRL		ch_ctrl[MAX_CHAN];
-	struct BUF_CTRL		buf_ctrl[MAX_CHAN];
-};
-
-/****************** ****************** *******************/
-#endif
+#include <uapi/linux/cyclades.h>
 
-#ifdef __KERNEL__
 
 /* Per card data structure */
 struct cyclades_card {
@@ -780,5 +357,4 @@
 
 /***************************************************************************/
 
-#endif /* __KERNEL__ */
 #endif /* _LINUX_CYCLADES_H */