drm/i915: Add eDP support on IGDNG mobile chip
This adds embedded DisplayPort support on next mobile chip which
aims to replace origin LVDS port. VBT's driver feature block has
been used to determine the type of current internal panel for eDP
or LVDS.
Currently no panel fitting support for eDP and backlight control
would be added in future.
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 34c5046..a9f1307 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -34,6 +34,8 @@
#include "drm_crtc_helper.h"
+#define HAS_eDP (intel_pipe_has_type(crtc, INTEL_OUTPUT_EDP))
+
bool intel_pipe_has_type (struct drm_crtc *crtc, int type);
static void intel_update_watermarks(struct drm_device *dev);
@@ -601,6 +603,23 @@
return false;
}
+struct drm_connector *
+intel_pipe_get_output (struct drm_crtc *crtc)
+{
+ struct drm_device *dev = crtc->dev;
+ struct drm_mode_config *mode_config = &dev->mode_config;
+ struct drm_connector *l_entry, *ret = NULL;
+
+ list_for_each_entry(l_entry, &mode_config->connector_list, head) {
+ if (l_entry->encoder &&
+ l_entry->encoder->crtc == crtc) {
+ ret = l_entry;
+ break;
+ }
+ }
+ return ret;
+}
+
#define INTELPllInvalid(s) do { /* DRM_DEBUG(s); */ return false; } while (0)
/**
* Returns whether the given set of divisors are valid for a given refclk with
@@ -790,6 +809,10 @@
int err_most = 47;
found = false;
+ /* eDP has only 2 clock choice, no n/m/p setting */
+ if (HAS_eDP)
+ return true;
+
if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT))
return intel_find_pll_igdng_dp(limit, crtc, target,
refclk, best_clock);
@@ -1052,6 +1075,67 @@
I915_WRITE(vga_reg, VGA_DISP_DISABLE);
}
+static void igdng_disable_pll_edp (struct drm_crtc *crtc)
+{
+ struct drm_device *dev = crtc->dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ u32 dpa_ctl;
+
+ DRM_DEBUG("\n");
+ dpa_ctl = I915_READ(DP_A);
+ dpa_ctl &= ~DP_PLL_ENABLE;
+ I915_WRITE(DP_A, dpa_ctl);
+}
+
+static void igdng_enable_pll_edp (struct drm_crtc *crtc)
+{
+ struct drm_device *dev = crtc->dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ u32 dpa_ctl;
+
+ dpa_ctl = I915_READ(DP_A);
+ dpa_ctl |= DP_PLL_ENABLE;
+ I915_WRITE(DP_A, dpa_ctl);
+ udelay(200);
+}
+
+
+static void igdng_set_pll_edp (struct drm_crtc *crtc, int clock)
+{
+ struct drm_device *dev = crtc->dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ u32 dpa_ctl;
+
+ DRM_DEBUG("eDP PLL enable for clock %d\n", clock);
+ dpa_ctl = I915_READ(DP_A);
+ dpa_ctl &= ~DP_PLL_FREQ_MASK;
+
+ if (clock < 200000) {
+ u32 temp;
+ dpa_ctl |= DP_PLL_FREQ_160MHZ;
+ /* workaround for 160Mhz:
+ 1) program 0x4600c bits 15:0 = 0x8124
+ 2) program 0x46010 bit 0 = 1
+ 3) program 0x46034 bit 24 = 1
+ 4) program 0x64000 bit 14 = 1
+ */
+ temp = I915_READ(0x4600c);
+ temp &= 0xffff0000;
+ I915_WRITE(0x4600c, temp | 0x8124);
+
+ temp = I915_READ(0x46010);
+ I915_WRITE(0x46010, temp | 1);
+
+ temp = I915_READ(0x46034);
+ I915_WRITE(0x46034, temp | (1 << 24));
+ } else {
+ dpa_ctl |= DP_PLL_FREQ_270MHZ;
+ }
+ I915_WRITE(DP_A, dpa_ctl);
+
+ udelay(500);
+}
+
static void igdng_crtc_dpms(struct drm_crtc *crtc, int mode)
{
struct drm_device *dev = crtc->dev;
@@ -1093,27 +1177,32 @@
case DRM_MODE_DPMS_STANDBY:
case DRM_MODE_DPMS_SUSPEND:
DRM_DEBUG("crtc %d dpms on\n", pipe);
- /* enable PCH DPLL */
- temp = I915_READ(pch_dpll_reg);
- if ((temp & DPLL_VCO_ENABLE) == 0) {
- I915_WRITE(pch_dpll_reg, temp | DPLL_VCO_ENABLE);
- I915_READ(pch_dpll_reg);
- }
+ if (HAS_eDP) {
+ /* enable eDP PLL */
+ igdng_enable_pll_edp(crtc);
+ } else {
+ /* enable PCH DPLL */
+ temp = I915_READ(pch_dpll_reg);
+ if ((temp & DPLL_VCO_ENABLE) == 0) {
+ I915_WRITE(pch_dpll_reg, temp | DPLL_VCO_ENABLE);
+ I915_READ(pch_dpll_reg);
+ }
- /* enable PCH FDI RX PLL, wait warmup plus DMI latency */
- temp = I915_READ(fdi_rx_reg);
- I915_WRITE(fdi_rx_reg, temp | FDI_RX_PLL_ENABLE |
- FDI_SEL_PCDCLK |
- FDI_DP_PORT_WIDTH_X4); /* default 4 lanes */
- I915_READ(fdi_rx_reg);
- udelay(200);
+ /* enable PCH FDI RX PLL, wait warmup plus DMI latency */
+ temp = I915_READ(fdi_rx_reg);
+ I915_WRITE(fdi_rx_reg, temp | FDI_RX_PLL_ENABLE |
+ FDI_SEL_PCDCLK |
+ FDI_DP_PORT_WIDTH_X4); /* default 4 lanes */
+ I915_READ(fdi_rx_reg);
+ udelay(200);
- /* Enable CPU FDI TX PLL, always on for IGDNG */
- temp = I915_READ(fdi_tx_reg);
- if ((temp & FDI_TX_PLL_ENABLE) == 0) {
- I915_WRITE(fdi_tx_reg, temp | FDI_TX_PLL_ENABLE);
- I915_READ(fdi_tx_reg);
- udelay(100);
+ /* Enable CPU FDI TX PLL, always on for IGDNG */
+ temp = I915_READ(fdi_tx_reg);
+ if ((temp & FDI_TX_PLL_ENABLE) == 0) {
+ I915_WRITE(fdi_tx_reg, temp | FDI_TX_PLL_ENABLE);
+ I915_READ(fdi_tx_reg);
+ udelay(100);
+ }
}
/* Enable CPU pipe */
@@ -1132,122 +1221,126 @@
I915_WRITE(dspbase_reg, I915_READ(dspbase_reg));
}
- /* enable CPU FDI TX and PCH FDI RX */
- temp = I915_READ(fdi_tx_reg);
- temp |= FDI_TX_ENABLE;
- temp |= FDI_DP_PORT_WIDTH_X4; /* default */
- temp &= ~FDI_LINK_TRAIN_NONE;
- temp |= FDI_LINK_TRAIN_PATTERN_1;
- I915_WRITE(fdi_tx_reg, temp);
- I915_READ(fdi_tx_reg);
+ if (!HAS_eDP) {
+ /* enable CPU FDI TX and PCH FDI RX */
+ temp = I915_READ(fdi_tx_reg);
+ temp |= FDI_TX_ENABLE;
+ temp |= FDI_DP_PORT_WIDTH_X4; /* default */
+ temp &= ~FDI_LINK_TRAIN_NONE;
+ temp |= FDI_LINK_TRAIN_PATTERN_1;
+ I915_WRITE(fdi_tx_reg, temp);
+ I915_READ(fdi_tx_reg);
- temp = I915_READ(fdi_rx_reg);
- temp &= ~FDI_LINK_TRAIN_NONE;
- temp |= FDI_LINK_TRAIN_PATTERN_1;
- I915_WRITE(fdi_rx_reg, temp | FDI_RX_ENABLE);
- I915_READ(fdi_rx_reg);
+ temp = I915_READ(fdi_rx_reg);
+ temp &= ~FDI_LINK_TRAIN_NONE;
+ temp |= FDI_LINK_TRAIN_PATTERN_1;
+ I915_WRITE(fdi_rx_reg, temp | FDI_RX_ENABLE);
+ I915_READ(fdi_rx_reg);
- udelay(150);
+ udelay(150);
- /* Train FDI. */
- /* umask FDI RX Interrupt symbol_lock and bit_lock bit
- for train result */
- temp = I915_READ(fdi_rx_imr_reg);
- temp &= ~FDI_RX_SYMBOL_LOCK;
- temp &= ~FDI_RX_BIT_LOCK;
- I915_WRITE(fdi_rx_imr_reg, temp);
- I915_READ(fdi_rx_imr_reg);
- udelay(150);
+ /* Train FDI. */
+ /* umask FDI RX Interrupt symbol_lock and bit_lock bit
+ for train result */
+ temp = I915_READ(fdi_rx_imr_reg);
+ temp &= ~FDI_RX_SYMBOL_LOCK;
+ temp &= ~FDI_RX_BIT_LOCK;
+ I915_WRITE(fdi_rx_imr_reg, temp);
+ I915_READ(fdi_rx_imr_reg);
+ udelay(150);
- temp = I915_READ(fdi_rx_iir_reg);
- DRM_DEBUG("FDI_RX_IIR 0x%x\n", temp);
+ temp = I915_READ(fdi_rx_iir_reg);
+ DRM_DEBUG("FDI_RX_IIR 0x%x\n", temp);
- if ((temp & FDI_RX_BIT_LOCK) == 0) {
- for (j = 0; j < tries; j++) {
- temp = I915_READ(fdi_rx_iir_reg);
- DRM_DEBUG("FDI_RX_IIR 0x%x\n", temp);
- if (temp & FDI_RX_BIT_LOCK)
- break;
- udelay(200);
- }
- if (j != tries)
+ if ((temp & FDI_RX_BIT_LOCK) == 0) {
+ for (j = 0; j < tries; j++) {
+ temp = I915_READ(fdi_rx_iir_reg);
+ DRM_DEBUG("FDI_RX_IIR 0x%x\n", temp);
+ if (temp & FDI_RX_BIT_LOCK)
+ break;
+ udelay(200);
+ }
+ if (j != tries)
+ I915_WRITE(fdi_rx_iir_reg,
+ temp | FDI_RX_BIT_LOCK);
+ else
+ DRM_DEBUG("train 1 fail\n");
+ } else {
I915_WRITE(fdi_rx_iir_reg,
temp | FDI_RX_BIT_LOCK);
- else
- DRM_DEBUG("train 1 fail\n");
- } else {
- I915_WRITE(fdi_rx_iir_reg,
- temp | FDI_RX_BIT_LOCK);
- DRM_DEBUG("train 1 ok 2!\n");
- }
- temp = I915_READ(fdi_tx_reg);
- temp &= ~FDI_LINK_TRAIN_NONE;
- temp |= FDI_LINK_TRAIN_PATTERN_2;
- I915_WRITE(fdi_tx_reg, temp);
-
- temp = I915_READ(fdi_rx_reg);
- temp &= ~FDI_LINK_TRAIN_NONE;
- temp |= FDI_LINK_TRAIN_PATTERN_2;
- I915_WRITE(fdi_rx_reg, temp);
-
- udelay(150);
-
- temp = I915_READ(fdi_rx_iir_reg);
- DRM_DEBUG("FDI_RX_IIR 0x%x\n", temp);
-
- if ((temp & FDI_RX_SYMBOL_LOCK) == 0) {
- for (j = 0; j < tries; j++) {
- temp = I915_READ(fdi_rx_iir_reg);
- DRM_DEBUG("FDI_RX_IIR 0x%x\n", temp);
- if (temp & FDI_RX_SYMBOL_LOCK)
- break;
- udelay(200);
+ DRM_DEBUG("train 1 ok 2!\n");
}
- if (j != tries) {
+ temp = I915_READ(fdi_tx_reg);
+ temp &= ~FDI_LINK_TRAIN_NONE;
+ temp |= FDI_LINK_TRAIN_PATTERN_2;
+ I915_WRITE(fdi_tx_reg, temp);
+
+ temp = I915_READ(fdi_rx_reg);
+ temp &= ~FDI_LINK_TRAIN_NONE;
+ temp |= FDI_LINK_TRAIN_PATTERN_2;
+ I915_WRITE(fdi_rx_reg, temp);
+
+ udelay(150);
+
+ temp = I915_READ(fdi_rx_iir_reg);
+ DRM_DEBUG("FDI_RX_IIR 0x%x\n", temp);
+
+ if ((temp & FDI_RX_SYMBOL_LOCK) == 0) {
+ for (j = 0; j < tries; j++) {
+ temp = I915_READ(fdi_rx_iir_reg);
+ DRM_DEBUG("FDI_RX_IIR 0x%x\n", temp);
+ if (temp & FDI_RX_SYMBOL_LOCK)
+ break;
+ udelay(200);
+ }
+ if (j != tries) {
+ I915_WRITE(fdi_rx_iir_reg,
+ temp | FDI_RX_SYMBOL_LOCK);
+ DRM_DEBUG("train 2 ok 1!\n");
+ } else
+ DRM_DEBUG("train 2 fail\n");
+ } else {
I915_WRITE(fdi_rx_iir_reg,
temp | FDI_RX_SYMBOL_LOCK);
- DRM_DEBUG("train 2 ok 1!\n");
- } else
- DRM_DEBUG("train 2 fail\n");
- } else {
- I915_WRITE(fdi_rx_iir_reg, temp | FDI_RX_SYMBOL_LOCK);
- DRM_DEBUG("train 2 ok 2!\n");
+ DRM_DEBUG("train 2 ok 2!\n");
+ }
+ DRM_DEBUG("train done\n");
+
+ /* set transcoder timing */
+ I915_WRITE(trans_htot_reg, I915_READ(cpu_htot_reg));
+ I915_WRITE(trans_hblank_reg, I915_READ(cpu_hblank_reg));
+ I915_WRITE(trans_hsync_reg, I915_READ(cpu_hsync_reg));
+
+ I915_WRITE(trans_vtot_reg, I915_READ(cpu_vtot_reg));
+ I915_WRITE(trans_vblank_reg, I915_READ(cpu_vblank_reg));
+ I915_WRITE(trans_vsync_reg, I915_READ(cpu_vsync_reg));
+
+ /* enable PCH transcoder */
+ temp = I915_READ(transconf_reg);
+ I915_WRITE(transconf_reg, temp | TRANS_ENABLE);
+ I915_READ(transconf_reg);
+
+ while ((I915_READ(transconf_reg) & TRANS_STATE_ENABLE) == 0)
+ ;
+
+ /* enable normal */
+
+ temp = I915_READ(fdi_tx_reg);
+ temp &= ~FDI_LINK_TRAIN_NONE;
+ I915_WRITE(fdi_tx_reg, temp | FDI_LINK_TRAIN_NONE |
+ FDI_TX_ENHANCE_FRAME_ENABLE);
+ I915_READ(fdi_tx_reg);
+
+ temp = I915_READ(fdi_rx_reg);
+ temp &= ~FDI_LINK_TRAIN_NONE;
+ I915_WRITE(fdi_rx_reg, temp | FDI_LINK_TRAIN_NONE |
+ FDI_RX_ENHANCE_FRAME_ENABLE);
+ I915_READ(fdi_rx_reg);
+
+ /* wait one idle pattern time */
+ udelay(100);
+
}
- DRM_DEBUG("train done\n");
-
- /* set transcoder timing */
- I915_WRITE(trans_htot_reg, I915_READ(cpu_htot_reg));
- I915_WRITE(trans_hblank_reg, I915_READ(cpu_hblank_reg));
- I915_WRITE(trans_hsync_reg, I915_READ(cpu_hsync_reg));
-
- I915_WRITE(trans_vtot_reg, I915_READ(cpu_vtot_reg));
- I915_WRITE(trans_vblank_reg, I915_READ(cpu_vblank_reg));
- I915_WRITE(trans_vsync_reg, I915_READ(cpu_vsync_reg));
-
- /* enable PCH transcoder */
- temp = I915_READ(transconf_reg);
- I915_WRITE(transconf_reg, temp | TRANS_ENABLE);
- I915_READ(transconf_reg);
-
- while ((I915_READ(transconf_reg) & TRANS_STATE_ENABLE) == 0)
- ;
-
- /* enable normal */
-
- temp = I915_READ(fdi_tx_reg);
- temp &= ~FDI_LINK_TRAIN_NONE;
- I915_WRITE(fdi_tx_reg, temp | FDI_LINK_TRAIN_NONE |
- FDI_TX_ENHANCE_FRAME_ENABLE);
- I915_READ(fdi_tx_reg);
-
- temp = I915_READ(fdi_rx_reg);
- temp &= ~FDI_LINK_TRAIN_NONE;
- I915_WRITE(fdi_rx_reg, temp | FDI_LINK_TRAIN_NONE |
- FDI_RX_ENHANCE_FRAME_ENABLE);
- I915_READ(fdi_rx_reg);
-
- /* wait one idle pattern time */
- udelay(100);
intel_crtc_load_lut(crtc);
@@ -1286,6 +1379,10 @@
} else
DRM_DEBUG("crtc %d is disabled\n", pipe);
+ if (HAS_eDP) {
+ igdng_disable_pll_edp(crtc);
+ }
+
/* disable CPU FDI tx and PCH FDI rx */
temp = I915_READ(fdi_tx_reg);
I915_WRITE(fdi_tx_reg, temp & ~FDI_TX_ENABLE);
@@ -2152,6 +2249,7 @@
u32 dpll = 0, fp = 0, dspcntr, pipeconf;
bool ok, is_sdvo = false, is_dvo = false;
bool is_crt = false, is_lvds = false, is_tv = false, is_dp = false;
+ bool is_edp = false;
struct drm_mode_config *mode_config = &dev->mode_config;
struct drm_connector *connector;
const intel_limit_t *limit;
@@ -2199,6 +2297,9 @@
case INTEL_OUTPUT_DISPLAYPORT:
is_dp = true;
break;
+ case INTEL_OUTPUT_EDP:
+ is_edp = true;
+ break;
}
num_outputs++;
@@ -2251,16 +2352,27 @@
/* FDI link */
if (IS_IGDNG(dev)) {
- /* DP over FDI requires target mode clock
- instead of link clock */
- if (is_dp)
+ int lane, link_bw;
+ /* eDP doesn't require FDI link, so just set DP M/N
+ according to current link config */
+ if (is_edp) {
+ struct drm_connector *edp;
target_clock = mode->clock;
- else
- target_clock = adjusted_mode->clock;
- igdng_compute_m_n(3, 4, /* lane num 4 */
- target_clock,
- 270000, /* lane clock */
- &m_n);
+ edp = intel_pipe_get_output(crtc);
+ intel_edp_link_config(to_intel_output(edp),
+ &lane, &link_bw);
+ } else {
+ /* DP over FDI requires target mode clock
+ instead of link clock */
+ if (is_dp)
+ target_clock = mode->clock;
+ else
+ target_clock = adjusted_mode->clock;
+ lane = 4;
+ link_bw = 270000;
+ }
+ igdng_compute_m_n(3, lane, target_clock,
+ link_bw, &m_n);
}
if (IS_IGD(dev))
@@ -2382,29 +2494,15 @@
dpll_reg = pch_dpll_reg;
}
- if (dpll & DPLL_VCO_ENABLE) {
+ if (is_edp) {
+ igdng_disable_pll_edp(crtc);
+ } else if ((dpll & DPLL_VCO_ENABLE)) {
I915_WRITE(fp_reg, fp);
I915_WRITE(dpll_reg, dpll & ~DPLL_VCO_ENABLE);
I915_READ(dpll_reg);
udelay(150);
}
- if (IS_IGDNG(dev)) {
- /* enable PCH clock reference source */
- /* XXX need to change the setting for other outputs */
- u32 temp;
- temp = I915_READ(PCH_DREF_CONTROL);
- temp &= ~DREF_NONSPREAD_SOURCE_MASK;
- temp |= DREF_NONSPREAD_CK505_ENABLE;
- temp &= ~DREF_SSC_SOURCE_MASK;
- temp |= DREF_SSC_SOURCE_ENABLE;
- temp &= ~DREF_SSC1_ENABLE;
- /* if no eDP, disable source output to CPU */
- temp &= ~DREF_CPU_SOURCE_OUTPUT_MASK;
- temp |= DREF_CPU_SOURCE_OUTPUT_DISABLE;
- I915_WRITE(PCH_DREF_CONTROL, temp);
- }
-
/* The LVDS pin pair needs to be on before the DPLLs are enabled.
* This is an exception to the general rule that mode_set doesn't turn
* things on.
@@ -2436,23 +2534,25 @@
if (is_dp)
intel_dp_set_m_n(crtc, mode, adjusted_mode);
- I915_WRITE(fp_reg, fp);
- I915_WRITE(dpll_reg, dpll);
- I915_READ(dpll_reg);
- /* Wait for the clocks to stabilize. */
- udelay(150);
-
- if (IS_I965G(dev) && !IS_IGDNG(dev)) {
- sdvo_pixel_multiply = adjusted_mode->clock / mode->clock;
- I915_WRITE(dpll_md_reg, (0 << DPLL_MD_UDI_DIVIDER_SHIFT) |
- ((sdvo_pixel_multiply - 1) << DPLL_MD_UDI_MULTIPLIER_SHIFT));
- } else {
- /* write it again -- the BIOS does, after all */
+ if (!is_edp) {
+ I915_WRITE(fp_reg, fp);
I915_WRITE(dpll_reg, dpll);
+ I915_READ(dpll_reg);
+ /* Wait for the clocks to stabilize. */
+ udelay(150);
+
+ if (IS_I965G(dev) && !IS_IGDNG(dev)) {
+ sdvo_pixel_multiply = adjusted_mode->clock / mode->clock;
+ I915_WRITE(dpll_md_reg, (0 << DPLL_MD_UDI_DIVIDER_SHIFT) |
+ ((sdvo_pixel_multiply - 1) << DPLL_MD_UDI_MULTIPLIER_SHIFT));
+ } else {
+ /* write it again -- the BIOS does, after all */
+ I915_WRITE(dpll_reg, dpll);
+ }
+ I915_READ(dpll_reg);
+ /* Wait for the clocks to stabilize. */
+ udelay(150);
}
- I915_READ(dpll_reg);
- /* Wait for the clocks to stabilize. */
- udelay(150);
I915_WRITE(htot_reg, (adjusted_mode->crtc_hdisplay - 1) |
((adjusted_mode->crtc_htotal - 1) << 16));
@@ -2482,10 +2582,14 @@
I915_WRITE(link_m1_reg, m_n.link_m);
I915_WRITE(link_n1_reg, m_n.link_n);
- /* enable FDI RX PLL too */
- temp = I915_READ(fdi_rx_reg);
- I915_WRITE(fdi_rx_reg, temp | FDI_RX_PLL_ENABLE);
- udelay(200);
+ if (is_edp) {
+ igdng_set_pll_edp(crtc, adjusted_mode->clock);
+ } else {
+ /* enable FDI RX PLL too */
+ temp = I915_READ(fdi_rx_reg);
+ I915_WRITE(fdi_rx_reg, temp | FDI_RX_PLL_ENABLE);
+ udelay(200);
+ }
}
I915_WRITE(pipeconf_reg, pipeconf);
@@ -3083,6 +3187,9 @@
if (IS_IGDNG(dev)) {
int found;
+ if (IS_MOBILE(dev) && (I915_READ(DP_A) & DP_DETECTED))
+ intel_dp_init(dev, DP_A);
+
if (I915_READ(HDMIB) & PORT_DETECTED) {
/* check SDVOB */
/* found = intel_sdvo_init(dev, HDMIB); */
@@ -3179,6 +3286,10 @@
(1 << 1));
clone_mask = (1 << INTEL_OUTPUT_DISPLAYPORT);
break;
+ case INTEL_OUTPUT_EDP:
+ crtc_mask = (1 << 1);
+ clone_mask = (1 << INTEL_OUTPUT_EDP);
+ break;
}
encoder->possible_crtcs = crtc_mask;
encoder->possible_clones = intel_connector_clones(dev, clone_mask);