diff --git a/include/linux/tty.h b/include/linux/tty.h
new file mode 100644
index 0000000..1b76106
--- /dev/null
+++ b/include/linux/tty.h
@@ -0,0 +1,412 @@
+#ifndef _LINUX_TTY_H
+#define _LINUX_TTY_H
+
+/*
+ * 'tty.h' defines some structures used by tty_io.c and some defines.
+ */
+
+/*
+ * These constants are also useful for user-level apps (e.g., VC
+ * resizing).
+ */
+#define MIN_NR_CONSOLES 1       /* must be at least 1 */
+#define MAX_NR_CONSOLES	63	/* serial lines start at 64 */
+#define MAX_NR_USER_CONSOLES 63	/* must be root to allocate above this */
+		/* Note: the ioctl VT_GETSTATE does not work for
+		   consoles 16 and higher (since it returns a short) */
+
+#ifdef __KERNEL__
+#include <linux/config.h>
+#include <linux/fs.h>
+#include <linux/major.h>
+#include <linux/termios.h>
+#include <linux/workqueue.h>
+#include <linux/tty_driver.h>
+#include <linux/tty_ldisc.h>
+
+#include <asm/system.h>
+
+
+/*
+ * (Note: the *_driver.minor_start values 1, 64, 128, 192 are
+ * hardcoded at present.)
+ */
+#define NR_PTYS	CONFIG_LEGACY_PTY_COUNT   /* Number of legacy ptys */
+#define NR_UNIX98_PTY_DEFAULT	4096      /* Default maximum for Unix98 ptys */
+#define NR_UNIX98_PTY_MAX	(1 << MINORBITS) /* Absolute limit */
+#define NR_LDISCS		16
+
+/*
+ * These are set up by the setup-routine at boot-time:
+ */
+
+struct screen_info {
+	u8  orig_x;		/* 0x00 */
+	u8  orig_y;		/* 0x01 */
+	u16 dontuse1;		/* 0x02 -- EXT_MEM_K sits here */
+	u16 orig_video_page;	/* 0x04 */
+	u8  orig_video_mode;	/* 0x06 */
+	u8  orig_video_cols;	/* 0x07 */
+	u16 unused2;		/* 0x08 */
+	u16 orig_video_ega_bx;	/* 0x0a */
+	u16 unused3;		/* 0x0c */
+	u8  orig_video_lines;	/* 0x0e */
+	u8  orig_video_isVGA;	/* 0x0f */
+	u16 orig_video_points;	/* 0x10 */
+
+	/* VESA graphic mode -- linear frame buffer */
+	u16 lfb_width;		/* 0x12 */
+	u16 lfb_height;		/* 0x14 */
+	u16 lfb_depth;		/* 0x16 */
+	u32 lfb_base;		/* 0x18 */
+	u32 lfb_size;		/* 0x1c */
+	u16 dontuse2, dontuse3;	/* 0x20 -- CL_MAGIC and CL_OFFSET here */
+	u16 lfb_linelength;	/* 0x24 */
+	u8  red_size;		/* 0x26 */
+	u8  red_pos;		/* 0x27 */
+	u8  green_size;		/* 0x28 */
+	u8  green_pos;		/* 0x29 */
+	u8  blue_size;		/* 0x2a */
+	u8  blue_pos;		/* 0x2b */
+	u8  rsvd_size;		/* 0x2c */
+	u8  rsvd_pos;		/* 0x2d */
+	u16 vesapm_seg;		/* 0x2e */
+	u16 vesapm_off;		/* 0x30 */
+	u16 pages;		/* 0x32 */
+	u16 vesa_attributes;	/* 0x34 */
+				/* 0x36 -- 0x3f reserved for future expansion */
+};
+
+extern struct screen_info screen_info;
+
+#define ORIG_X			(screen_info.orig_x)
+#define ORIG_Y			(screen_info.orig_y)
+#define ORIG_VIDEO_MODE		(screen_info.orig_video_mode)
+#define ORIG_VIDEO_COLS 	(screen_info.orig_video_cols)
+#define ORIG_VIDEO_EGA_BX	(screen_info.orig_video_ega_bx)
+#define ORIG_VIDEO_LINES	(screen_info.orig_video_lines)
+#define ORIG_VIDEO_ISVGA	(screen_info.orig_video_isVGA)
+#define ORIG_VIDEO_POINTS       (screen_info.orig_video_points)
+
+#define VIDEO_TYPE_MDA		0x10	/* Monochrome Text Display	*/
+#define VIDEO_TYPE_CGA		0x11	/* CGA Display 			*/
+#define VIDEO_TYPE_EGAM		0x20	/* EGA/VGA in Monochrome Mode	*/
+#define VIDEO_TYPE_EGAC		0x21	/* EGA in Color Mode		*/
+#define VIDEO_TYPE_VGAC		0x22	/* VGA+ in Color Mode		*/
+#define VIDEO_TYPE_VLFB		0x23	/* VESA VGA in graphic mode	*/
+
+#define VIDEO_TYPE_PICA_S3	0x30	/* ACER PICA-61 local S3 video	*/
+#define VIDEO_TYPE_MIPS_G364	0x31    /* MIPS Magnum 4000 G364 video  */
+#define VIDEO_TYPE_SGI          0x33    /* Various SGI graphics hardware */
+
+#define VIDEO_TYPE_TGAC		0x40	/* DEC TGA */
+
+#define VIDEO_TYPE_SUN          0x50    /* Sun frame buffer. */
+#define VIDEO_TYPE_SUNPCI       0x51    /* Sun PCI based frame buffer. */
+
+#define VIDEO_TYPE_PMAC		0x60	/* PowerMacintosh frame buffer. */
+
+/*
+ * This character is the same as _POSIX_VDISABLE: it cannot be used as
+ * a c_cc[] character, but indicates that a particular special character
+ * isn't in use (eg VINTR has no character etc)
+ */
+#define __DISABLED_CHAR '\0'
+
+/*
+ * This is the flip buffer used for the tty driver.  The buffer is
+ * located in the tty structure, and is used as a high speed interface
+ * between the tty driver and the tty line discipline.
+ */
+#define TTY_FLIPBUF_SIZE 512
+
+struct tty_flip_buffer {
+	struct work_struct		work;
+	struct semaphore pty_sem;
+	char		*char_buf_ptr;
+	unsigned char	*flag_buf_ptr;
+	int		count;
+	int		buf_num;
+	unsigned char	char_buf[2*TTY_FLIPBUF_SIZE];
+	char		flag_buf[2*TTY_FLIPBUF_SIZE];
+	unsigned char	slop[4]; /* N.B. bug overwrites buffer by 1 */
+};
+/*
+ * The pty uses char_buf and flag_buf as a contiguous buffer
+ */
+#define PTY_BUF_SIZE	4*TTY_FLIPBUF_SIZE
+
+/*
+ * When a break, frame error, or parity error happens, these codes are
+ * stuffed into the flags buffer.
+ */
+#define TTY_NORMAL	0
+#define TTY_BREAK	1
+#define TTY_FRAME	2
+#define TTY_PARITY	3
+#define TTY_OVERRUN	4
+
+#define INTR_CHAR(tty) ((tty)->termios->c_cc[VINTR])
+#define QUIT_CHAR(tty) ((tty)->termios->c_cc[VQUIT])
+#define ERASE_CHAR(tty) ((tty)->termios->c_cc[VERASE])
+#define KILL_CHAR(tty) ((tty)->termios->c_cc[VKILL])
+#define EOF_CHAR(tty) ((tty)->termios->c_cc[VEOF])
+#define TIME_CHAR(tty) ((tty)->termios->c_cc[VTIME])
+#define MIN_CHAR(tty) ((tty)->termios->c_cc[VMIN])
+#define SWTC_CHAR(tty) ((tty)->termios->c_cc[VSWTC])
+#define START_CHAR(tty) ((tty)->termios->c_cc[VSTART])
+#define STOP_CHAR(tty) ((tty)->termios->c_cc[VSTOP])
+#define SUSP_CHAR(tty) ((tty)->termios->c_cc[VSUSP])
+#define EOL_CHAR(tty) ((tty)->termios->c_cc[VEOL])
+#define REPRINT_CHAR(tty) ((tty)->termios->c_cc[VREPRINT])
+#define DISCARD_CHAR(tty) ((tty)->termios->c_cc[VDISCARD])
+#define WERASE_CHAR(tty) ((tty)->termios->c_cc[VWERASE])
+#define LNEXT_CHAR(tty)	((tty)->termios->c_cc[VLNEXT])
+#define EOL2_CHAR(tty) ((tty)->termios->c_cc[VEOL2])
+
+#define _I_FLAG(tty,f)	((tty)->termios->c_iflag & (f))
+#define _O_FLAG(tty,f)	((tty)->termios->c_oflag & (f))
+#define _C_FLAG(tty,f)	((tty)->termios->c_cflag & (f))
+#define _L_FLAG(tty,f)	((tty)->termios->c_lflag & (f))
+
+#define I_IGNBRK(tty)	_I_FLAG((tty),IGNBRK)
+#define I_BRKINT(tty)	_I_FLAG((tty),BRKINT)
+#define I_IGNPAR(tty)	_I_FLAG((tty),IGNPAR)
+#define I_PARMRK(tty)	_I_FLAG((tty),PARMRK)
+#define I_INPCK(tty)	_I_FLAG((tty),INPCK)
+#define I_ISTRIP(tty)	_I_FLAG((tty),ISTRIP)
+#define I_INLCR(tty)	_I_FLAG((tty),INLCR)
+#define I_IGNCR(tty)	_I_FLAG((tty),IGNCR)
+#define I_ICRNL(tty)	_I_FLAG((tty),ICRNL)
+#define I_IUCLC(tty)	_I_FLAG((tty),IUCLC)
+#define I_IXON(tty)	_I_FLAG((tty),IXON)
+#define I_IXANY(tty)	_I_FLAG((tty),IXANY)
+#define I_IXOFF(tty)	_I_FLAG((tty),IXOFF)
+#define I_IMAXBEL(tty)	_I_FLAG((tty),IMAXBEL)
+#define I_IUTF8(tty)	_I_FLAG((tty),IUTF8)
+
+#define O_OPOST(tty)	_O_FLAG((tty),OPOST)
+#define O_OLCUC(tty)	_O_FLAG((tty),OLCUC)
+#define O_ONLCR(tty)	_O_FLAG((tty),ONLCR)
+#define O_OCRNL(tty)	_O_FLAG((tty),OCRNL)
+#define O_ONOCR(tty)	_O_FLAG((tty),ONOCR)
+#define O_ONLRET(tty)	_O_FLAG((tty),ONLRET)
+#define O_OFILL(tty)	_O_FLAG((tty),OFILL)
+#define O_OFDEL(tty)	_O_FLAG((tty),OFDEL)
+#define O_NLDLY(tty)	_O_FLAG((tty),NLDLY)
+#define O_CRDLY(tty)	_O_FLAG((tty),CRDLY)
+#define O_TABDLY(tty)	_O_FLAG((tty),TABDLY)
+#define O_BSDLY(tty)	_O_FLAG((tty),BSDLY)
+#define O_VTDLY(tty)	_O_FLAG((tty),VTDLY)
+#define O_FFDLY(tty)	_O_FLAG((tty),FFDLY)
+
+#define C_BAUD(tty)	_C_FLAG((tty),CBAUD)
+#define C_CSIZE(tty)	_C_FLAG((tty),CSIZE)
+#define C_CSTOPB(tty)	_C_FLAG((tty),CSTOPB)
+#define C_CREAD(tty)	_C_FLAG((tty),CREAD)
+#define C_PARENB(tty)	_C_FLAG((tty),PARENB)
+#define C_PARODD(tty)	_C_FLAG((tty),PARODD)
+#define C_HUPCL(tty)	_C_FLAG((tty),HUPCL)
+#define C_CLOCAL(tty)	_C_FLAG((tty),CLOCAL)
+#define C_CIBAUD(tty)	_C_FLAG((tty),CIBAUD)
+#define C_CRTSCTS(tty)	_C_FLAG((tty),CRTSCTS)
+
+#define L_ISIG(tty)	_L_FLAG((tty),ISIG)
+#define L_ICANON(tty)	_L_FLAG((tty),ICANON)
+#define L_XCASE(tty)	_L_FLAG((tty),XCASE)
+#define L_ECHO(tty)	_L_FLAG((tty),ECHO)
+#define L_ECHOE(tty)	_L_FLAG((tty),ECHOE)
+#define L_ECHOK(tty)	_L_FLAG((tty),ECHOK)
+#define L_ECHONL(tty)	_L_FLAG((tty),ECHONL)
+#define L_NOFLSH(tty)	_L_FLAG((tty),NOFLSH)
+#define L_TOSTOP(tty)	_L_FLAG((tty),TOSTOP)
+#define L_ECHOCTL(tty)	_L_FLAG((tty),ECHOCTL)
+#define L_ECHOPRT(tty)	_L_FLAG((tty),ECHOPRT)
+#define L_ECHOKE(tty)	_L_FLAG((tty),ECHOKE)
+#define L_FLUSHO(tty)	_L_FLAG((tty),FLUSHO)
+#define L_PENDIN(tty)	_L_FLAG((tty),PENDIN)
+#define L_IEXTEN(tty)	_L_FLAG((tty),IEXTEN)
+
+struct device;
+/*
+ * Where all of the state associated with a tty is kept while the tty
+ * is open.  Since the termios state should be kept even if the tty
+ * has been closed --- for things like the baud rate, etc --- it is
+ * not stored here, but rather a pointer to the real state is stored
+ * here.  Possible the winsize structure should have the same
+ * treatment, but (1) the default 80x24 is usually right and (2) it's
+ * most often used by a windowing system, which will set the correct
+ * size each time the window is created or resized anyway.
+ * 						- TYT, 9/14/92
+ */
+struct tty_struct {
+	int	magic;
+	struct tty_driver *driver;
+	int index;
+	struct tty_ldisc ldisc;
+	struct semaphore termios_sem;
+	struct termios *termios, *termios_locked;
+	char name[64];
+	int pgrp;
+	int session;
+	unsigned long flags;
+	int count;
+	struct winsize winsize;
+	unsigned char stopped:1, hw_stopped:1, flow_stopped:1, packet:1;
+	unsigned char low_latency:1, warned:1;
+	unsigned char ctrl_status;
+
+	struct tty_struct *link;
+	struct fasync_struct *fasync;
+	struct tty_flip_buffer flip;
+	int max_flip_cnt;
+	int alt_speed;		/* For magic substitution of 38400 bps */
+	wait_queue_head_t write_wait;
+	wait_queue_head_t read_wait;
+	struct work_struct hangup_work;
+	void *disc_data;
+	void *driver_data;
+	struct list_head tty_files;
+
+#define N_TTY_BUF_SIZE 4096
+	
+	/*
+	 * The following is data for the N_TTY line discipline.  For
+	 * historical reasons, this is included in the tty structure.
+	 */
+	unsigned int column;
+	unsigned char lnext:1, erasing:1, raw:1, real_raw:1, icanon:1;
+	unsigned char closing:1;
+	unsigned short minimum_to_wake;
+	unsigned long overrun_time;
+	int num_overrun;
+	unsigned long process_char_map[256/(8*sizeof(unsigned long))];
+	char *read_buf;
+	int read_head;
+	int read_tail;
+	int read_cnt;
+	unsigned long read_flags[N_TTY_BUF_SIZE/(8*sizeof(unsigned long))];
+	int canon_data;
+	unsigned long canon_head;
+	unsigned int canon_column;
+	struct semaphore atomic_read;
+	struct semaphore atomic_write;
+	unsigned char *write_buf;
+	int write_cnt;
+	spinlock_t read_lock;
+	/* If the tty has a pending do_SAK, queue it here - akpm */
+	struct work_struct SAK_work;
+};
+
+/* tty magic number */
+#define TTY_MAGIC		0x5401
+
+/*
+ * These bits are used in the flags field of the tty structure.
+ * 
+ * So that interrupts won't be able to mess up the queues,
+ * copy_to_cooked must be atomic with respect to itself, as must
+ * tty->write.  Thus, you must use the inline functions set_bit() and
+ * clear_bit() to make things atomic.
+ */
+#define TTY_THROTTLED 		0	/* Call unthrottle() at threshold min */
+#define TTY_IO_ERROR 		1	/* Canse an I/O error (may be no ldisc too) */
+#define TTY_OTHER_CLOSED 	2	/* Other side (if any) has closed */
+#define TTY_EXCLUSIVE 		3	/* Exclusive open mode */
+#define TTY_DEBUG 		4	/* Debugging */
+#define TTY_DO_WRITE_WAKEUP 	5	/* Call write_wakeup after queuing new */
+#define TTY_PUSH 		6	/* n_tty private */
+#define TTY_CLOSING 		7	/* ->close() in progress */
+#define TTY_DONT_FLIP 		8	/* Defer buffer flip */
+#define TTY_LDISC 		9	/* Line discipline attached */
+#define TTY_HW_COOK_OUT 	14	/* Hardware can do output cooking */
+#define TTY_HW_COOK_IN 		15	/* Hardware can do input cooking */
+#define TTY_PTY_LOCK 		16	/* pty private */
+#define TTY_NO_WRITE_SPLIT 	17	/* Preserve write boundaries to driver */
+#define TTY_HUPPED 		18	/* Post driver->hangup() */
+
+#define TTY_WRITE_FLUSH(tty) tty_write_flush((tty))
+
+extern void tty_write_flush(struct tty_struct *);
+
+extern struct termios tty_std_termios;
+extern int fg_console, last_console, want_console;
+
+extern int kmsg_redirect;
+
+extern void console_init(void);
+extern int vcs_init(void);
+
+extern int tty_paranoia_check(struct tty_struct *tty, struct inode *inode,
+			      const char *routine);
+extern char *tty_name(struct tty_struct *tty, char *buf);
+extern void tty_wait_until_sent(struct tty_struct * tty, long timeout);
+extern int tty_check_change(struct tty_struct * tty);
+extern void stop_tty(struct tty_struct * tty);
+extern void start_tty(struct tty_struct * tty);
+extern int tty_register_ldisc(int disc, struct tty_ldisc *new_ldisc);
+extern int tty_register_driver(struct tty_driver *driver);
+extern int tty_unregister_driver(struct tty_driver *driver);
+extern void tty_register_device(struct tty_driver *driver, unsigned index, struct device *dev);
+extern void tty_unregister_device(struct tty_driver *driver, unsigned index);
+extern int tty_read_raw_data(struct tty_struct *tty, unsigned char *bufp,
+			     int buflen);
+extern void tty_write_message(struct tty_struct *tty, char *msg);
+
+extern int is_orphaned_pgrp(int pgrp);
+extern int is_ignored(int sig);
+extern int tty_signal(int sig, struct tty_struct *tty);
+extern void tty_hangup(struct tty_struct * tty);
+extern void tty_vhangup(struct tty_struct * tty);
+extern void tty_unhangup(struct file *filp);
+extern int tty_hung_up_p(struct file * filp);
+extern void do_SAK(struct tty_struct *tty);
+extern void disassociate_ctty(int priv);
+extern void tty_flip_buffer_push(struct tty_struct *tty);
+extern int tty_get_baud_rate(struct tty_struct *tty);
+extern int tty_termios_baud_rate(struct termios *termios);
+
+extern struct tty_ldisc *tty_ldisc_ref(struct tty_struct *);
+extern void tty_ldisc_deref(struct tty_ldisc *);
+extern struct tty_ldisc *tty_ldisc_ref_wait(struct tty_struct *);
+
+extern struct tty_ldisc *tty_ldisc_get(int);
+extern void tty_ldisc_put(int);
+
+extern void tty_wakeup(struct tty_struct *tty);
+extern void tty_ldisc_flush(struct tty_struct *tty);
+
+struct semaphore;
+extern struct semaphore tty_sem;
+
+/* n_tty.c */
+extern struct tty_ldisc tty_ldisc_N_TTY;
+
+/* tty_ioctl.c */
+extern int n_tty_ioctl(struct tty_struct * tty, struct file * file,
+		       unsigned int cmd, unsigned long arg);
+
+/* serial.c */
+
+extern void serial_console_init(void);
+ 
+/* pcxx.c */
+
+extern int pcxe_open(struct tty_struct *tty, struct file *filp);
+
+/* printk.c */
+
+extern void console_print(const char *);
+
+/* vt.c */
+
+extern int vt_ioctl(struct tty_struct *tty, struct file * file,
+		    unsigned int cmd, unsigned long arg);
+
+static inline dev_t tty_devnum(struct tty_struct *tty)
+{
+	return MKDEV(tty->driver->major, tty->driver->minor_start) + tty->index;
+}
+
+#endif /* __KERNEL__ */
+#endif