Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
new file mode 100644
index 0000000..c3fb598
--- /dev/null
+++ b/include/linux/serial_core.h
@@ -0,0 +1,491 @@
+/*
+ * linux/drivers/char/serial_core.h
+ *
+ * Copyright (C) 2000 Deep Blue Solutions Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef LINUX_SERIAL_CORE_H
+#define LINUX_SERIAL_CORE_H
+
+/*
+ * The type definitions. These are from Ted Ts'o's serial.h
+ */
+#define PORT_UNKNOWN 0
+#define PORT_8250 1
+#define PORT_16450 2
+#define PORT_16550 3
+#define PORT_16550A 4
+#define PORT_CIRRUS 5
+#define PORT_16650 6
+#define PORT_16650V2 7
+#define PORT_16750 8
+#define PORT_STARTECH 9
+#define PORT_16C950 10
+#define PORT_16654 11
+#define PORT_16850 12
+#define PORT_RSA 13
+#define PORT_NS16550A 14
+#define PORT_XSCALE 15
+#define PORT_MAX_8250 15 /* max port ID */
+
+/*
+ * ARM specific type numbers. These are not currently guaranteed
+ * to be implemented, and will change in the future. These are
+ * separate so any additions to the old serial.c that occur before
+ * we are merged can be easily merged here.
+ */
+#define PORT_PXA 31
+#define PORT_AMBA 32
+#define PORT_CLPS711X 33
+#define PORT_SA1100 34
+#define PORT_UART00 35
+#define PORT_21285 37
+
+/* Sparc type numbers. */
+#define PORT_SUNZILOG 38
+#define PORT_SUNSAB 39
+
+/* NEC v850. */
+#define PORT_V850E_UART 40
+
+/* DZ */
+#define PORT_DZ 47
+
+/* Parisc type numbers. */
+#define PORT_MUX 48
+
+/* Macintosh Zilog type numbers */
+#define PORT_MAC_ZILOG 50 /* m68k : not yet implemented */
+#define PORT_PMAC_ZILOG 51
+
+/* SH-SCI */
+#define PORT_SCI 52
+#define PORT_SCIF 53
+#define PORT_IRDA 54
+
+/* Samsung S3C2410 SoC and derivatives thereof */
+#define PORT_S3C2410 55
+
+/* SGI IP22 aka Indy / Challenge S / Indigo 2 */
+#define PORT_IP22ZILOG 56
+
+/* Sharp LH7a40x -- an ARM9 SoC series */
+#define PORT_LH7A40X 57
+
+/* PPC CPM type number */
+#define PORT_CPM 58
+
+/* MPC52xx type numbers */
+#define PORT_MPC52xx 59
+
+/* IBM icom */
+#define PORT_ICOM 60
+
+/* Samsung S3C2440 SoC */
+#define PORT_S3C2440 61
+
+/* Motorola i.MX SoC */
+#define PORT_IMX 62
+
+/* Marvell MPSC */
+#define PORT_MPSC 63
+
+/* TXX9 type number */
+#define PORT_TXX9 64
+
+/* NEC VR4100 series SIU/DSIU */
+#define PORT_VR41XX_SIU 65
+#define PORT_VR41XX_DSIU 66
+
+/* Samsung S3C2400 SoC */
+#define PORT_S3C2400 67
+
+/* M32R SIO */
+#define PORT_M32R_SIO 68
+
+/*Digi jsm */
+#define PORT_JSM 65
+
+#ifdef __KERNEL__
+
+#include <linux/config.h>
+#include <linux/interrupt.h>
+#include <linux/circ_buf.h>
+#include <linux/spinlock.h>
+#include <linux/sched.h>
+#include <linux/tty.h>
+
+struct uart_port;
+struct uart_info;
+struct serial_struct;
+struct device;
+
+/*
+ * This structure describes all the operations that can be
+ * done on the physical hardware.
+ */
+struct uart_ops {
+ unsigned int (*tx_empty)(struct uart_port *);
+ void (*set_mctrl)(struct uart_port *, unsigned int mctrl);
+ unsigned int (*get_mctrl)(struct uart_port *);
+ void (*stop_tx)(struct uart_port *, unsigned int tty_stop);
+ void (*start_tx)(struct uart_port *, unsigned int tty_start);
+ void (*send_xchar)(struct uart_port *, char ch);
+ void (*stop_rx)(struct uart_port *);
+ void (*enable_ms)(struct uart_port *);
+ void (*break_ctl)(struct uart_port *, int ctl);
+ int (*startup)(struct uart_port *);
+ void (*shutdown)(struct uart_port *);
+ void (*set_termios)(struct uart_port *, struct termios *new,
+ struct termios *old);
+ void (*pm)(struct uart_port *, unsigned int state,
+ unsigned int oldstate);
+ int (*set_wake)(struct uart_port *, unsigned int state);
+
+ /*
+ * Return a string describing the type of the port
+ */
+ const char *(*type)(struct uart_port *);
+
+ /*
+ * Release IO and memory resources used by the port.
+ * This includes iounmap if necessary.
+ */
+ void (*release_port)(struct uart_port *);
+
+ /*
+ * Request IO and memory resources used by the port.
+ * This includes iomapping the port if necessary.
+ */
+ int (*request_port)(struct uart_port *);
+ void (*config_port)(struct uart_port *, int);
+ int (*verify_port)(struct uart_port *, struct serial_struct *);
+ int (*ioctl)(struct uart_port *, unsigned int, unsigned long);
+};
+
+#define UART_CONFIG_TYPE (1 << 0)
+#define UART_CONFIG_IRQ (1 << 1)
+
+struct uart_icount {
+ __u32 cts;
+ __u32 dsr;
+ __u32 rng;
+ __u32 dcd;
+ __u32 rx;
+ __u32 tx;
+ __u32 frame;
+ __u32 overrun;
+ __u32 parity;
+ __u32 brk;
+ __u32 buf_overrun;
+};
+
+struct uart_port {
+ spinlock_t lock; /* port lock */
+ unsigned int iobase; /* in/out[bwl] */
+ unsigned char __iomem *membase; /* read/write[bwl] */
+ unsigned int irq; /* irq number */
+ unsigned int uartclk; /* base uart clock */
+ unsigned char fifosize; /* tx fifo size */
+ unsigned char x_char; /* xon/xoff char */
+ unsigned char regshift; /* reg offset shift */
+ unsigned char iotype; /* io access style */
+
+#define UPIO_PORT (0)
+#define UPIO_HUB6 (1)
+#define UPIO_MEM (2)
+#define UPIO_MEM32 (3)
+
+ unsigned int read_status_mask; /* driver specific */
+ unsigned int ignore_status_mask; /* driver specific */
+ struct uart_info *info; /* pointer to parent info */
+ struct uart_icount icount; /* statistics */
+
+ struct console *cons; /* struct console, if any */
+#ifdef CONFIG_SERIAL_CORE_CONSOLE
+ unsigned long sysrq; /* sysrq timeout */
+#endif
+
+ unsigned int flags;
+
+#define UPF_FOURPORT (1 << 1)
+#define UPF_SAK (1 << 2)
+#define UPF_SPD_MASK (0x1030)
+#define UPF_SPD_HI (0x0010)
+#define UPF_SPD_VHI (0x0020)
+#define UPF_SPD_CUST (0x0030)
+#define UPF_SPD_SHI (0x1000)
+#define UPF_SPD_WARP (0x1010)
+#define UPF_SKIP_TEST (1 << 6)
+#define UPF_AUTO_IRQ (1 << 7)
+#define UPF_HARDPPS_CD (1 << 11)
+#define UPF_LOW_LATENCY (1 << 13)
+#define UPF_BUGGY_UART (1 << 14)
+#define UPF_AUTOPROBE (1 << 15)
+#define UPF_MAGIC_MULTIPLIER (1 << 16)
+#define UPF_BOOT_ONLYMCA (1 << 22)
+#define UPF_CONS_FLOW (1 << 23)
+#define UPF_SHARE_IRQ (1 << 24)
+#define UPF_BOOT_AUTOCONF (1 << 28)
+#define UPF_IOREMAP (1 << 31)
+
+#define UPF_CHANGE_MASK (0x17fff)
+#define UPF_USR_MASK (UPF_SPD_MASK|UPF_LOW_LATENCY)
+
+ unsigned int mctrl; /* current modem ctrl settings */
+ unsigned int timeout; /* character-based timeout */
+ unsigned int type; /* port type */
+ struct uart_ops *ops;
+ unsigned int custom_divisor;
+ unsigned int line; /* port index */
+ unsigned long mapbase; /* for ioremap */
+ struct device *dev; /* parent device */
+ unsigned char hub6; /* this should be in the 8250 driver */
+ unsigned char unused[3];
+};
+
+/*
+ * This is the state information which is persistent across opens.
+ * The low level driver must not to touch any elements contained
+ * within.
+ */
+struct uart_state {
+ unsigned int close_delay; /* msec */
+ unsigned int closing_wait; /* msec */
+
+#define USF_CLOSING_WAIT_INF (0)
+#define USF_CLOSING_WAIT_NONE (~0U)
+
+ int count;
+ int pm_state;
+ struct uart_info *info;
+ struct uart_port *port;
+
+ struct semaphore sem;
+};
+
+#define UART_XMIT_SIZE PAGE_SIZE
+/*
+ * This is the state information which is only valid when the port
+ * is open; it may be freed by the core driver once the device has
+ * been closed. Either the low level driver or the core can modify
+ * stuff here.
+ */
+struct uart_info {
+ struct tty_struct *tty;
+ struct circ_buf xmit;
+ unsigned int flags;
+
+/*
+ * These are the flags that specific to info->flags, and reflect our
+ * internal state. They can not be accessed via port->flags. Low
+ * level drivers must not change these, but may query them instead.
+ */
+#define UIF_CHECK_CD (1 << 25)
+#define UIF_CTS_FLOW (1 << 26)
+#define UIF_NORMAL_ACTIVE (1 << 29)
+#define UIF_INITIALIZED (1 << 31)
+
+ int blocked_open;
+
+ struct tasklet_struct tlet;
+
+ wait_queue_head_t open_wait;
+ wait_queue_head_t delta_msr_wait;
+};
+
+/* number of characters left in xmit buffer before we ask for more */
+#define WAKEUP_CHARS 256
+
+struct module;
+struct tty_driver;
+
+struct uart_driver {
+ struct module *owner;
+ const char *driver_name;
+ const char *dev_name;
+ const char *devfs_name;
+ int major;
+ int minor;
+ int nr;
+ struct console *cons;
+
+ /*
+ * these are private; the low level driver should not
+ * touch these; they should be initialised to NULL
+ */
+ struct uart_state *state;
+ struct tty_driver *tty_driver;
+};
+
+void uart_write_wakeup(struct uart_port *port);
+
+/*
+ * Baud rate helpers.
+ */
+void uart_update_timeout(struct uart_port *port, unsigned int cflag,
+ unsigned int baud);
+unsigned int uart_get_baud_rate(struct uart_port *port, struct termios *termios,
+ struct termios *old, unsigned int min,
+ unsigned int max);
+unsigned int uart_get_divisor(struct uart_port *port, unsigned int baud);
+
+/*
+ * Console helpers.
+ */
+struct uart_port *uart_get_console(struct uart_port *ports, int nr,
+ struct console *c);
+void uart_parse_options(char *options, int *baud, int *parity, int *bits,
+ int *flow);
+int uart_set_options(struct uart_port *port, struct console *co, int baud,
+ int parity, int bits, int flow);
+struct tty_driver *uart_console_device(struct console *co, int *index);
+
+/*
+ * Port/driver registration/removal
+ */
+int uart_register_driver(struct uart_driver *uart);
+void uart_unregister_driver(struct uart_driver *uart);
+void uart_unregister_port(struct uart_driver *reg, int line);
+int uart_register_port(struct uart_driver *reg, struct uart_port *port);
+int uart_add_one_port(struct uart_driver *reg, struct uart_port *port);
+int uart_remove_one_port(struct uart_driver *reg, struct uart_port *port);
+int uart_match_port(struct uart_port *port1, struct uart_port *port2);
+
+/*
+ * Power Management
+ */
+int uart_suspend_port(struct uart_driver *reg, struct uart_port *port);
+int uart_resume_port(struct uart_driver *reg, struct uart_port *port);
+
+#define uart_circ_empty(circ) ((circ)->head == (circ)->tail)
+#define uart_circ_clear(circ) ((circ)->head = (circ)->tail = 0)
+
+#define uart_circ_chars_pending(circ) \
+ (CIRC_CNT((circ)->head, (circ)->tail, UART_XMIT_SIZE))
+
+#define uart_circ_chars_free(circ) \
+ (CIRC_SPACE((circ)->head, (circ)->tail, UART_XMIT_SIZE))
+
+#define uart_tx_stopped(port) \
+ ((port)->info->tty->stopped || (port)->info->tty->hw_stopped)
+
+/*
+ * The following are helper functions for the low level drivers.
+ */
+#ifdef SUPPORT_SYSRQ
+static inline int
+uart_handle_sysrq_char(struct uart_port *port, unsigned int ch,
+ struct pt_regs *regs)
+{
+ if (port->sysrq) {
+ if (ch && time_before(jiffies, port->sysrq)) {
+ handle_sysrq(ch, regs, NULL);
+ port->sysrq = 0;
+ return 1;
+ }
+ port->sysrq = 0;
+ }
+ return 0;
+}
+#else
+#define uart_handle_sysrq_char(port,ch,regs) (0)
+#endif
+
+/*
+ * We do the SysRQ and SAK checking like this...
+ */
+static inline int uart_handle_break(struct uart_port *port)
+{
+ struct uart_info *info = port->info;
+#ifdef SUPPORT_SYSRQ
+ if (port->cons && port->cons->index == port->line) {
+ if (!port->sysrq) {
+ port->sysrq = jiffies + HZ*5;
+ return 1;
+ }
+ port->sysrq = 0;
+ }
+#endif
+ if (info->flags & UPF_SAK)
+ do_SAK(info->tty);
+ return 0;
+}
+
+/**
+ * uart_handle_dcd_change - handle a change of carrier detect state
+ * @port: uart_port structure for the open port
+ * @status: new carrier detect status, nonzero if active
+ */
+static inline void
+uart_handle_dcd_change(struct uart_port *port, unsigned int status)
+{
+ struct uart_info *info = port->info;
+
+ port->icount.dcd++;
+
+#ifdef CONFIG_HARD_PPS
+ if ((port->flags & UPF_HARDPPS_CD) && status)
+ hardpps();
+#endif
+
+ if (info->flags & UIF_CHECK_CD) {
+ if (status)
+ wake_up_interruptible(&info->open_wait);
+ else if (info->tty)
+ tty_hangup(info->tty);
+ }
+}
+
+/**
+ * uart_handle_cts_change - handle a change of clear-to-send state
+ * @port: uart_port structure for the open port
+ * @status: new clear to send status, nonzero if active
+ */
+static inline void
+uart_handle_cts_change(struct uart_port *port, unsigned int status)
+{
+ struct uart_info *info = port->info;
+ struct tty_struct *tty = info->tty;
+
+ port->icount.cts++;
+
+ if (info->flags & UIF_CTS_FLOW) {
+ if (tty->hw_stopped) {
+ if (status) {
+ tty->hw_stopped = 0;
+ port->ops->start_tx(port, 0);
+ uart_write_wakeup(port);
+ }
+ } else {
+ if (!status) {
+ tty->hw_stopped = 1;
+ port->ops->stop_tx(port, 0);
+ }
+ }
+ }
+}
+
+/*
+ * UART_ENABLE_MS - determine if port should enable modem status irqs
+ */
+#define UART_ENABLE_MS(port,cflag) ((port)->flags & UPF_HARDPPS_CD || \
+ (cflag) & CRTSCTS || \
+ !((cflag) & CLOCAL))
+
+#endif
+
+#endif /* LINUX_SERIAL_CORE_H */