diff --git a/Documentation/vfio.txt b/Documentation/vfio.txt
index b9ca023..96978ec 100644
--- a/Documentation/vfio.txt
+++ b/Documentation/vfio.txt
@@ -305,7 +305,15 @@
 an excellent performance which has limitations such as inability to do
 locked pages accounting in real time.
 
-So 3 additional ioctls have been added:
+4) According to sPAPR specification, A Partitionable Endpoint (PE) is an I/O
+subtree that can be treated as a unit for the purposes of partitioning and
+error recovery. A PE may be a single or multi-function IOA (IO Adapter), a
+function of a multi-function IOA, or multiple IOAs (possibly including switch
+and bridge structures above the multiple IOAs). PPC64 guests detect PCI errors
+and recover from them via EEH RTAS services, which works on the basis of
+additional ioctl commands.
+
+So 4 additional ioctls have been added:
 
 	VFIO_IOMMU_SPAPR_TCE_GET_INFO - returns the size and the start
 		of the DMA window on the PCI bus.
@@ -316,9 +324,12 @@
 
 	VFIO_IOMMU_DISABLE - disables the container.
 
+	VFIO_EEH_PE_OP - provides an API for EEH setup, error detection and recovery.
 
 The code flow from the example above should be slightly changed:
 
+	struct vfio_eeh_pe_op pe_op = { .argsz = sizeof(pe_op), .flags = 0 };
+
 	.....
 	/* Add the group to the container */
 	ioctl(group, VFIO_GROUP_SET_CONTAINER, &container);
@@ -342,9 +353,79 @@
 	dma_map.flags = VFIO_DMA_MAP_FLAG_READ | VFIO_DMA_MAP_FLAG_WRITE;
 
 	/* Check here is .iova/.size are within DMA window from spapr_iommu_info */
-
 	ioctl(container, VFIO_IOMMU_MAP_DMA, &dma_map);
-	.....
+
+	/* Get a file descriptor for the device */
+	device = ioctl(group, VFIO_GROUP_GET_DEVICE_FD, "0000:06:0d.0");
+
+	....
+
+	/* Gratuitous device reset and go... */
+	ioctl(device, VFIO_DEVICE_RESET);
+
+	/* Make sure EEH is supported */
+	ioctl(container, VFIO_CHECK_EXTENSION, VFIO_EEH);
+
+	/* Enable the EEH functionality on the device */
+	pe_op.op = VFIO_EEH_PE_ENABLE;
+	ioctl(container, VFIO_EEH_PE_OP, &pe_op);
+
+	/* You're suggested to create additional data struct to represent
+	 * PE, and put child devices belonging to same IOMMU group to the
+	 * PE instance for later reference.
+	 */
+
+	/* Check the PE's state and make sure it's in functional state */
+	pe_op.op = VFIO_EEH_PE_GET_STATE;
+	ioctl(container, VFIO_EEH_PE_OP, &pe_op);
+
+	/* Save device state using pci_save_state().
+	 * EEH should be enabled on the specified device.
+	 */
+
+	....
+
+	/* When 0xFF's returned from reading PCI config space or IO BARs
+	 * of the PCI device. Check the PE's state to see if that has been
+	 * frozen.
+	 */
+	ioctl(container, VFIO_EEH_PE_OP, &pe_op);
+
+	/* Waiting for pending PCI transactions to be completed and don't
+	 * produce any more PCI traffic from/to the affected PE until
+	 * recovery is finished.
+	 */
+
+	/* Enable IO for the affected PE and collect logs. Usually, the
+	 * standard part of PCI config space, AER registers are dumped
+	 * as logs for further analysis.
+	 */
+	pe_op.op = VFIO_EEH_PE_UNFREEZE_IO;
+	ioctl(container, VFIO_EEH_PE_OP, &pe_op);
+
+	/*
+	 * Issue PE reset: hot or fundamental reset. Usually, hot reset
+	 * is enough. However, the firmware of some PCI adapters would
+	 * require fundamental reset.
+	 */
+	pe_op.op = VFIO_EEH_PE_RESET_HOT;
+	ioctl(container, VFIO_EEH_PE_OP, &pe_op);
+	pe_op.op = VFIO_EEH_PE_RESET_DEACTIVATE;
+	ioctl(container, VFIO_EEH_PE_OP, &pe_op);
+
+	/* Configure the PCI bridges for the affected PE */
+	pe_op.op = VFIO_EEH_PE_CONFIGURE;
+	ioctl(container, VFIO_EEH_PE_OP, &pe_op);
+
+	/* Restored state we saved at initialization time. pci_restore_state()
+	 * is good enough as an example.
+	 */
+
+	/* Hopefully, error is recovered successfully. Now, you can resume to
+	 * start PCI traffic to/from the affected PE.
+	 */
+
+	....
 
 -------------------------------------------------------------------------------
 
diff --git a/drivers/vfio/Makefile b/drivers/vfio/Makefile
index 72bfabc..50e30bc 100644
--- a/drivers/vfio/Makefile
+++ b/drivers/vfio/Makefile
@@ -1,4 +1,5 @@
 obj-$(CONFIG_VFIO) += vfio.o
 obj-$(CONFIG_VFIO_IOMMU_TYPE1) += vfio_iommu_type1.o
 obj-$(CONFIG_VFIO_IOMMU_SPAPR_TCE) += vfio_iommu_spapr_tce.o
+obj-$(CONFIG_EEH) += vfio_spapr_eeh.o
 obj-$(CONFIG_VFIO_PCI) += pci/
diff --git a/drivers/vfio/pci/vfio_pci.c b/drivers/vfio/pci/vfio_pci.c
index 010e0f8..e2ee80f 100644
--- a/drivers/vfio/pci/vfio_pci.c
+++ b/drivers/vfio/pci/vfio_pci.c
@@ -157,8 +157,10 @@
 {
 	struct vfio_pci_device *vdev = device_data;
 
-	if (atomic_dec_and_test(&vdev->refcnt))
+	if (atomic_dec_and_test(&vdev->refcnt)) {
+		vfio_spapr_pci_eeh_release(vdev->pdev);
 		vfio_pci_disable(vdev);
+	}
 
 	module_put(THIS_MODULE);
 }
@@ -166,19 +168,27 @@
 static int vfio_pci_open(void *device_data)
 {
 	struct vfio_pci_device *vdev = device_data;
+	int ret;
 
 	if (!try_module_get(THIS_MODULE))
 		return -ENODEV;
 
 	if (atomic_inc_return(&vdev->refcnt) == 1) {
-		int ret = vfio_pci_enable(vdev);
+		ret = vfio_pci_enable(vdev);
+		if (ret)
+			goto error;
+
+		ret = vfio_spapr_pci_eeh_open(vdev->pdev);
 		if (ret) {
-			module_put(THIS_MODULE);
-			return ret;
+			vfio_pci_disable(vdev);
+			goto error;
 		}
 	}
 
 	return 0;
+error:
+	module_put(THIS_MODULE);
+	return ret;
 }
 
 static int vfio_pci_get_irq_count(struct vfio_pci_device *vdev, int irq_type)
diff --git a/drivers/vfio/vfio_iommu_spapr_tce.c b/drivers/vfio/vfio_iommu_spapr_tce.c
index a84788b..730b4ef 100644
--- a/drivers/vfio/vfio_iommu_spapr_tce.c
+++ b/drivers/vfio/vfio_iommu_spapr_tce.c
@@ -156,7 +156,16 @@
 
 	switch (cmd) {
 	case VFIO_CHECK_EXTENSION:
-		return (arg == VFIO_SPAPR_TCE_IOMMU) ? 1 : 0;
+		switch (arg) {
+		case VFIO_SPAPR_TCE_IOMMU:
+			ret = 1;
+			break;
+		default:
+			ret = vfio_spapr_iommu_eeh_ioctl(NULL, cmd, arg);
+			break;
+		}
+
+		return (ret < 0) ? 0 : ret;
 
 	case VFIO_IOMMU_SPAPR_TCE_GET_INFO: {
 		struct vfio_iommu_spapr_tce_info info;
@@ -283,6 +292,12 @@
 		tce_iommu_disable(container);
 		mutex_unlock(&container->lock);
 		return 0;
+	case VFIO_EEH_PE_OP:
+		if (!container->tbl || !container->tbl->it_group)
+			return -ENODEV;
+
+		return vfio_spapr_iommu_eeh_ioctl(container->tbl->it_group,
+						  cmd, arg);
 	}
 
 	return -ENOTTY;
diff --git a/drivers/vfio/vfio_spapr_eeh.c b/drivers/vfio/vfio_spapr_eeh.c
new file mode 100644
index 0000000..f834b4c
--- /dev/null
+++ b/drivers/vfio/vfio_spapr_eeh.c
@@ -0,0 +1,87 @@
+/*
+ * EEH functionality support for VFIO devices. The feature is only
+ * available on sPAPR compatible platforms.
+ *
+ * Copyright Gavin Shan, IBM Corporation 2014.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/uaccess.h>
+#include <linux/vfio.h>
+#include <asm/eeh.h>
+
+/* We might build address mapping here for "fast" path later */
+int vfio_spapr_pci_eeh_open(struct pci_dev *pdev)
+{
+	return eeh_dev_open(pdev);
+}
+
+void vfio_spapr_pci_eeh_release(struct pci_dev *pdev)
+{
+	eeh_dev_release(pdev);
+}
+
+long vfio_spapr_iommu_eeh_ioctl(struct iommu_group *group,
+				unsigned int cmd, unsigned long arg)
+{
+	struct eeh_pe *pe;
+	struct vfio_eeh_pe_op op;
+	unsigned long minsz;
+	long ret = -EINVAL;
+
+	switch (cmd) {
+	case VFIO_CHECK_EXTENSION:
+		if (arg == VFIO_EEH)
+			ret = eeh_enabled() ? 1 : 0;
+		else
+			ret = 0;
+		break;
+	case VFIO_EEH_PE_OP:
+		pe = eeh_iommu_group_to_pe(group);
+		if (!pe)
+			return -ENODEV;
+
+		minsz = offsetofend(struct vfio_eeh_pe_op, op);
+		if (copy_from_user(&op, (void __user *)arg, minsz))
+			return -EFAULT;
+		if (op.argsz < minsz || op.flags)
+			return -EINVAL;
+
+		switch (op.op) {
+		case VFIO_EEH_PE_DISABLE:
+			ret = eeh_pe_set_option(pe, EEH_OPT_DISABLE);
+			break;
+		case VFIO_EEH_PE_ENABLE:
+			ret = eeh_pe_set_option(pe, EEH_OPT_ENABLE);
+			break;
+		case VFIO_EEH_PE_UNFREEZE_IO:
+			ret = eeh_pe_set_option(pe, EEH_OPT_THAW_MMIO);
+			break;
+		case VFIO_EEH_PE_UNFREEZE_DMA:
+			ret = eeh_pe_set_option(pe, EEH_OPT_THAW_DMA);
+			break;
+		case VFIO_EEH_PE_GET_STATE:
+			ret = eeh_pe_get_state(pe);
+			break;
+		case VFIO_EEH_PE_RESET_DEACTIVATE:
+			ret = eeh_pe_reset(pe, EEH_RESET_DEACTIVATE);
+			break;
+		case VFIO_EEH_PE_RESET_HOT:
+			ret = eeh_pe_reset(pe, EEH_RESET_HOT);
+			break;
+		case VFIO_EEH_PE_RESET_FUNDAMENTAL:
+			ret = eeh_pe_reset(pe, EEH_RESET_FUNDAMENTAL);
+			break;
+		case VFIO_EEH_PE_CONFIGURE:
+			ret = eeh_pe_configure(pe);
+			break;
+		default:
+			ret = -EINVAL;
+		}
+	}
+
+	return ret;
+}
diff --git a/include/linux/vfio.h b/include/linux/vfio.h
index 8ec980b..25a0fbd 100644
--- a/include/linux/vfio.h
+++ b/include/linux/vfio.h
@@ -98,4 +98,27 @@
 extern long vfio_external_check_extension(struct vfio_group *group,
 					  unsigned long arg);
 
+#ifdef CONFIG_EEH
+extern int vfio_spapr_pci_eeh_open(struct pci_dev *pdev);
+extern void vfio_spapr_pci_eeh_release(struct pci_dev *pdev);
+extern long vfio_spapr_iommu_eeh_ioctl(struct iommu_group *group,
+				       unsigned int cmd,
+				       unsigned long arg);
+#else
+static inline int vfio_spapr_pci_eeh_open(struct pci_dev *pdev)
+{
+	return 0;
+}
+
+static inline void vfio_spapr_pci_eeh_release(struct pci_dev *pdev)
+{
+}
+
+static inline long vfio_spapr_iommu_eeh_ioctl(struct iommu_group *group,
+					      unsigned int cmd,
+					      unsigned long arg)
+{
+	return -ENOTTY;
+}
+#endif /* CONFIG_EEH */
 #endif /* VFIO_H */
diff --git a/include/uapi/linux/vfio.h b/include/uapi/linux/vfio.h
index cb9023d..6612974 100644
--- a/include/uapi/linux/vfio.h
+++ b/include/uapi/linux/vfio.h
@@ -30,6 +30,9 @@
  */
 #define VFIO_DMA_CC_IOMMU		4
 
+/* Check if EEH is supported */
+#define VFIO_EEH			5
+
 /*
  * The IOCTL interface is designed for extensibility by embedding the
  * structure length (argsz) and flags into structures passed between
@@ -455,6 +458,37 @@
 
 #define VFIO_IOMMU_SPAPR_TCE_GET_INFO	_IO(VFIO_TYPE, VFIO_BASE + 12)
 
+/*
+ * EEH PE operation struct provides ways to:
+ * - enable/disable EEH functionality;
+ * - unfreeze IO/DMA for frozen PE;
+ * - read PE state;
+ * - reset PE;
+ * - configure PE.
+ */
+struct vfio_eeh_pe_op {
+	__u32 argsz;
+	__u32 flags;
+	__u32 op;
+};
+
+#define VFIO_EEH_PE_DISABLE		0	/* Disable EEH functionality */
+#define VFIO_EEH_PE_ENABLE		1	/* Enable EEH functionality  */
+#define VFIO_EEH_PE_UNFREEZE_IO		2	/* Enable IO for frozen PE   */
+#define VFIO_EEH_PE_UNFREEZE_DMA	3	/* Enable DMA for frozen PE  */
+#define VFIO_EEH_PE_GET_STATE		4	/* PE state retrieval        */
+#define  VFIO_EEH_PE_STATE_NORMAL	0	/* PE in functional state    */
+#define  VFIO_EEH_PE_STATE_RESET	1	/* PE reset in progress      */
+#define  VFIO_EEH_PE_STATE_STOPPED	2	/* Stopped DMA and IO        */
+#define  VFIO_EEH_PE_STATE_STOPPED_DMA	4	/* Stopped DMA only          */
+#define  VFIO_EEH_PE_STATE_UNAVAIL	5	/* State unavailable         */
+#define VFIO_EEH_PE_RESET_DEACTIVATE	5	/* Deassert PE reset         */
+#define VFIO_EEH_PE_RESET_HOT		6	/* Assert hot reset          */
+#define VFIO_EEH_PE_RESET_FUNDAMENTAL	7	/* Assert fundamental reset  */
+#define VFIO_EEH_PE_CONFIGURE		8	/* PE configuration          */
+
+#define VFIO_EEH_PE_OP			_IO(VFIO_TYPE, VFIO_BASE + 21)
+
 /* ***************************************************************** */
 
 #endif /* _UAPIVFIO_H */