diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index 1b607d7..fe8c009 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -31,12 +31,22 @@
 	depends on OF
 	select GENERIC_PHY
 
+config OMAP_CONTROL_PHY
+	tristate "OMAP CONTROL PHY Driver"
+	help
+	  Enable this to add support for the PHY part present in the control
+	  module. This driver has API to power on the USB2 PHY and to write to
+	  the mailbox. The mailbox is present only in omap4 and the register to
+	  power on the USB2 PHY is present in OMAP4 and OMAP5. OMAP5 has an
+	  additional register to power on USB3 PHY/SATA PHY/PCIE PHY
+	  (PIPE3 PHY).
+
 config OMAP_USB2
 	tristate "OMAP USB2 PHY Driver"
 	depends on ARCH_OMAP2PLUS
 	depends on USB_PHY
 	select GENERIC_PHY
-	select OMAP_CONTROL_USB
+	select OMAP_CONTROL_PHY
 	help
 	  Enable this to support the transceiver that is part of SOC. This
 	  driver takes care of all the PHY functionality apart from comparator.
@@ -47,7 +57,7 @@
 	tristate "TI PIPE3 PHY Driver"
 	depends on ARCH_OMAP2PLUS || COMPILE_TEST
 	select GENERIC_PHY
-	select OMAP_CONTROL_USB
+	select OMAP_CONTROL_PHY
 	help
 	  Enable this to support the PIPE3 PHY that is part of TI SOCs. This
 	  driver takes care of all the PHY functionality apart from comparator.
diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
index ecf0d3f..8da05a8 100644
--- a/drivers/phy/Makefile
+++ b/drivers/phy/Makefile
@@ -7,6 +7,7 @@
 obj-$(CONFIG_PHY_EXYNOS_DP_VIDEO)	+= phy-exynos-dp-video.o
 obj-$(CONFIG_PHY_EXYNOS_MIPI_VIDEO)	+= phy-exynos-mipi-video.o
 obj-$(CONFIG_PHY_MVEBU_SATA)		+= phy-mvebu-sata.o
+obj-$(CONFIG_OMAP_CONTROL_PHY)		+= phy-omap-control.o
 obj-$(CONFIG_OMAP_USB2)			+= phy-omap-usb2.o
 obj-$(CONFIG_TI_PIPE3)			+= phy-ti-pipe3.o
 obj-$(CONFIG_TWL4030_USB)		+= phy-twl4030-usb.o
diff --git a/drivers/phy/phy-omap-control.c b/drivers/phy/phy-omap-control.c
new file mode 100644
index 0000000..17fc200
--- /dev/null
+++ b/drivers/phy/phy-omap-control.c
@@ -0,0 +1,320 @@
+/*
+ * omap-control-phy.c - The PHY part of control module.
+ *
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * Author: Kishon Vijay Abraham I <kishon@ti.com>
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/phy/omap_control_phy.h>
+
+/**
+ * omap_control_phy_power - power on/off the phy using control module reg
+ * @dev: the control module device
+ * @on: 0 or 1, based on powering on or off the PHY
+ */
+void omap_control_phy_power(struct device *dev, int on)
+{
+	u32 val;
+	unsigned long rate;
+	struct omap_control_phy	*control_phy;
+
+	if (IS_ERR(dev) || !dev) {
+		pr_err("%s: invalid device\n", __func__);
+		return;
+	}
+
+	control_phy = dev_get_drvdata(dev);
+	if (!control_phy) {
+		dev_err(dev, "%s: invalid control phy device\n", __func__);
+		return;
+	}
+
+	if (control_phy->type == OMAP_CTRL_TYPE_OTGHS)
+		return;
+
+	val = readl(control_phy->power);
+
+	switch (control_phy->type) {
+	case OMAP_CTRL_TYPE_USB2:
+		if (on)
+			val &= ~OMAP_CTRL_DEV_PHY_PD;
+		else
+			val |= OMAP_CTRL_DEV_PHY_PD;
+		break;
+
+	case OMAP_CTRL_TYPE_PIPE3:
+		rate = clk_get_rate(control_phy->sys_clk);
+		rate = rate/1000000;
+
+		if (on) {
+			val &= ~(OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_MASK |
+				OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_FREQ_MASK);
+			val |= OMAP_CTRL_PIPE3_PHY_TX_RX_POWERON <<
+				OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_SHIFT;
+			val |= rate <<
+				OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_FREQ_SHIFT;
+		} else {
+			val &= ~OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_MASK;
+			val |= OMAP_CTRL_PIPE3_PHY_TX_RX_POWEROFF <<
+				OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_SHIFT;
+		}
+		break;
+
+	case OMAP_CTRL_TYPE_DRA7USB2:
+		if (on)
+			val &= ~OMAP_CTRL_USB2_PHY_PD;
+		else
+			val |= OMAP_CTRL_USB2_PHY_PD;
+		break;
+
+	case OMAP_CTRL_TYPE_AM437USB2:
+		if (on) {
+			val &= ~(AM437X_CTRL_USB2_PHY_PD |
+					AM437X_CTRL_USB2_OTG_PD);
+			val |= (AM437X_CTRL_USB2_OTGVDET_EN |
+					AM437X_CTRL_USB2_OTGSESSEND_EN);
+		} else {
+			val &= ~(AM437X_CTRL_USB2_OTGVDET_EN |
+					AM437X_CTRL_USB2_OTGSESSEND_EN);
+			val |= (AM437X_CTRL_USB2_PHY_PD |
+					 AM437X_CTRL_USB2_OTG_PD);
+		}
+		break;
+	default:
+		dev_err(dev, "%s: type %d not recognized\n",
+			__func__, control_phy->type);
+		break;
+	}
+
+	writel(val, control_phy->power);
+}
+EXPORT_SYMBOL_GPL(omap_control_phy_power);
+
+/**
+ * omap_control_usb_host_mode - set AVALID, VBUSVALID and ID pin in grounded
+ * @ctrl_phy: struct omap_control_phy *
+ *
+ * Writes to the mailbox register to notify the usb core that a usb
+ * device has been connected.
+ */
+static void omap_control_usb_host_mode(struct omap_control_phy *ctrl_phy)
+{
+	u32 val;
+
+	val = readl(ctrl_phy->otghs_control);
+	val &= ~(OMAP_CTRL_DEV_IDDIG | OMAP_CTRL_DEV_SESSEND);
+	val |= OMAP_CTRL_DEV_AVALID | OMAP_CTRL_DEV_VBUSVALID;
+	writel(val, ctrl_phy->otghs_control);
+}
+
+/**
+ * omap_control_usb_device_mode - set AVALID, VBUSVALID and ID pin in high
+ * impedance
+ * @ctrl_phy: struct omap_control_phy *
+ *
+ * Writes to the mailbox register to notify the usb core that it has been
+ * connected to a usb host.
+ */
+static void omap_control_usb_device_mode(struct omap_control_phy *ctrl_phy)
+{
+	u32 val;
+
+	val = readl(ctrl_phy->otghs_control);
+	val &= ~OMAP_CTRL_DEV_SESSEND;
+	val |= OMAP_CTRL_DEV_IDDIG | OMAP_CTRL_DEV_AVALID |
+		OMAP_CTRL_DEV_VBUSVALID;
+	writel(val, ctrl_phy->otghs_control);
+}
+
+/**
+ * omap_control_usb_set_sessionend - Enable SESSIONEND and IDIG to high
+ * impedance
+ * @ctrl_phy: struct omap_control_phy *
+ *
+ * Writes to the mailbox register to notify the usb core it's now in
+ * disconnected state.
+ */
+static void omap_control_usb_set_sessionend(struct omap_control_phy *ctrl_phy)
+{
+	u32 val;
+
+	val = readl(ctrl_phy->otghs_control);
+	val &= ~(OMAP_CTRL_DEV_AVALID | OMAP_CTRL_DEV_VBUSVALID);
+	val |= OMAP_CTRL_DEV_IDDIG | OMAP_CTRL_DEV_SESSEND;
+	writel(val, ctrl_phy->otghs_control);
+}
+
+/**
+ * omap_control_usb_set_mode - Calls to functions to set USB in one of host mode
+ * or device mode or to denote disconnected state
+ * @dev: the control module device
+ * @mode: The mode to which usb should be configured
+ *
+ * This is an API to write to the mailbox register to notify the usb core that
+ * a usb device has been connected.
+ */
+void omap_control_usb_set_mode(struct device *dev,
+	enum omap_control_usb_mode mode)
+{
+	struct omap_control_phy	*ctrl_phy;
+
+	if (IS_ERR(dev) || !dev)
+		return;
+
+	ctrl_phy = dev_get_drvdata(dev);
+
+	if (!ctrl_phy) {
+		dev_err(dev, "Invalid control phy device\n");
+		return;
+	}
+
+	if (ctrl_phy->type != OMAP_CTRL_TYPE_OTGHS)
+		return;
+
+	switch (mode) {
+	case USB_MODE_HOST:
+		omap_control_usb_host_mode(ctrl_phy);
+		break;
+	case USB_MODE_DEVICE:
+		omap_control_usb_device_mode(ctrl_phy);
+		break;
+	case USB_MODE_DISCONNECT:
+		omap_control_usb_set_sessionend(ctrl_phy);
+		break;
+	default:
+		dev_vdbg(dev, "invalid omap control usb mode\n");
+	}
+}
+EXPORT_SYMBOL_GPL(omap_control_usb_set_mode);
+
+#ifdef CONFIG_OF
+
+static const enum omap_control_phy_type otghs_data = OMAP_CTRL_TYPE_OTGHS;
+static const enum omap_control_phy_type usb2_data = OMAP_CTRL_TYPE_USB2;
+static const enum omap_control_phy_type pipe3_data = OMAP_CTRL_TYPE_PIPE3;
+static const enum omap_control_phy_type dra7usb2_data = OMAP_CTRL_TYPE_DRA7USB2;
+static const enum omap_control_phy_type am437usb2_data = OMAP_CTRL_TYPE_AM437USB2;
+
+static const struct of_device_id omap_control_phy_id_table[] = {
+	{
+		.compatible = "ti,control-phy-otghs",
+		.data = &otghs_data,
+	},
+	{
+		.compatible = "ti,control-phy-usb2",
+		.data = &usb2_data,
+	},
+	{
+		.compatible = "ti,control-phy-pipe3",
+		.data = &pipe3_data,
+	},
+	{
+		.compatible = "ti,control-phy-dra7usb2",
+		.data = &dra7usb2_data,
+	},
+	{
+		.compatible = "ti,control-phy-am437usb2",
+		.data = &am437usb2_data,
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(of, omap_control_phy_id_table);
+#endif
+
+
+static int omap_control_phy_probe(struct platform_device *pdev)
+{
+	struct resource	*res;
+	const struct of_device_id *of_id;
+	struct omap_control_phy *control_phy;
+
+	of_id = of_match_device(of_match_ptr(omap_control_phy_id_table),
+				&pdev->dev);
+	if (!of_id)
+		return -EINVAL;
+
+	control_phy = devm_kzalloc(&pdev->dev, sizeof(*control_phy),
+		GFP_KERNEL);
+	if (!control_phy) {
+		dev_err(&pdev->dev, "unable to alloc memory for control phy\n");
+		return -ENOMEM;
+	}
+
+	control_phy->dev = &pdev->dev;
+	control_phy->type = *(enum omap_control_phy_type *)of_id->data;
+
+	if (control_phy->type == OMAP_CTRL_TYPE_OTGHS) {
+		res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
+			"otghs_control");
+		control_phy->otghs_control = devm_ioremap_resource(
+			&pdev->dev, res);
+		if (IS_ERR(control_phy->otghs_control))
+			return PTR_ERR(control_phy->otghs_control);
+	} else {
+		res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
+				"power");
+		control_phy->power = devm_ioremap_resource(&pdev->dev, res);
+		if (IS_ERR(control_phy->power)) {
+			dev_err(&pdev->dev, "Couldn't get power register\n");
+			return PTR_ERR(control_phy->power);
+		}
+	}
+
+	if (control_phy->type == OMAP_CTRL_TYPE_PIPE3) {
+		control_phy->sys_clk = devm_clk_get(control_phy->dev,
+			"sys_clkin");
+		if (IS_ERR(control_phy->sys_clk)) {
+			pr_err("%s: unable to get sys_clkin\n", __func__);
+			return -EINVAL;
+		}
+	}
+
+	dev_set_drvdata(control_phy->dev, control_phy);
+
+	return 0;
+}
+
+static struct platform_driver omap_control_phy_driver = {
+	.probe		= omap_control_phy_probe,
+	.driver		= {
+		.name	= "omap-control-phy",
+		.owner	= THIS_MODULE,
+		.of_match_table = of_match_ptr(omap_control_phy_id_table),
+	},
+};
+
+static int __init omap_control_phy_init(void)
+{
+	return platform_driver_register(&omap_control_phy_driver);
+}
+subsys_initcall(omap_control_phy_init);
+
+static void __exit omap_control_phy_exit(void)
+{
+	platform_driver_unregister(&omap_control_phy_driver);
+}
+module_exit(omap_control_phy_exit);
+
+MODULE_ALIAS("platform: omap_control_phy");
+MODULE_AUTHOR("Texas Instruments Inc.");
+MODULE_DESCRIPTION("OMAP Control Module PHY Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/phy/phy-omap-usb2.c b/drivers/phy/phy-omap-usb2.c
index 3cc4aba..a2205a8 100644
--- a/drivers/phy/phy-omap-usb2.c
+++ b/drivers/phy/phy-omap-usb2.c
@@ -27,7 +27,7 @@
 #include <linux/err.h>
 #include <linux/pm_runtime.h>
 #include <linux/delay.h>
-#include <linux/usb/omap_control_usb.h>
+#include <linux/phy/omap_control_phy.h>
 #include <linux/phy/phy.h>
 #include <linux/of_platform.h>
 
@@ -105,7 +105,7 @@
 {
 	struct omap_usb *phy = phy_get_drvdata(x);
 
-	omap_control_usb_phy_power(phy->control_dev, 0);
+	omap_control_phy_power(phy->control_dev, 0);
 
 	return 0;
 }
@@ -114,7 +114,7 @@
 {
 	struct omap_usb *phy = phy_get_drvdata(x);
 
-	omap_control_usb_phy_power(phy->control_dev, 1);
+	omap_control_phy_power(phy->control_dev, 1);
 
 	return 0;
 }
@@ -251,7 +251,7 @@
 	}
 
 	phy->control_dev = &control_pdev->dev;
-	omap_control_usb_phy_power(phy->control_dev, 0);
+	omap_control_phy_power(phy->control_dev, 0);
 
 	otg->set_host		= omap_usb_set_host;
 	otg->set_peripheral	= omap_usb_set_peripheral;
diff --git a/drivers/phy/phy-ti-pipe3.c b/drivers/phy/phy-ti-pipe3.c
index c8d1674..fd029b1 100644
--- a/drivers/phy/phy-ti-pipe3.c
+++ b/drivers/phy/phy-ti-pipe3.c
@@ -26,7 +26,7 @@
 #include <linux/io.h>
 #include <linux/pm_runtime.h>
 #include <linux/delay.h>
-#include <linux/usb/omap_control_usb.h>
+#include <linux/phy/omap_control_phy.h>
 #include <linux/of_platform.h>
 
 #define	PLL_STATUS		0x00000004
@@ -134,7 +134,7 @@
 		return -EBUSY;
 	}
 
-	omap_control_usb_phy_power(phy->control_dev, 0);
+	omap_control_phy_power(phy->control_dev, 0);
 
 	return 0;
 }
@@ -232,7 +232,7 @@
 	if (ret)
 		return ret;
 
-	omap_control_usb_phy_power(phy->control_dev, 1);
+	omap_control_phy_power(phy->control_dev, 1);
 
 	return 0;
 }
@@ -304,7 +304,7 @@
 
 	phy->control_dev = &control_pdev->dev;
 
-	omap_control_usb_phy_power(phy->control_dev, 0);
+	omap_control_phy_power(phy->control_dev, 0);
 
 	platform_set_drvdata(pdev, phy);
 	pm_runtime_enable(phy->dev);
diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c
index 8aa59a2..d341c14 100644
--- a/drivers/usb/musb/omap2430.c
+++ b/drivers/usb/musb/omap2430.c
@@ -37,7 +37,7 @@
 #include <linux/err.h>
 #include <linux/delay.h>
 #include <linux/usb/musb-omap.h>
-#include <linux/usb/omap_control_usb.h>
+#include <linux/phy/omap_control_phy.h>
 #include <linux/of_platform.h>
 
 #include "musb_core.h"
diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig
index c337ba2..416e0c8 100644
--- a/drivers/usb/phy/Kconfig
+++ b/drivers/usb/phy/Kconfig
@@ -75,16 +75,6 @@
 	  built-in with usb ip or which are autonomous and doesn't require any
 	  phy programming such as ISP1x04 etc.
 
-config OMAP_CONTROL_USB
-	tristate "OMAP CONTROL USB Driver"
-	depends on ARCH_OMAP2PLUS || COMPILE_TEST
-	help
-	  Enable this to add support for the USB part present in the control
-	  module. This driver has API to power on the USB2 PHY and to write to
-	  the mailbox. The mailbox is present only in omap4 and the register to
-	  power on the USB2 PHY is present in OMAP4 and OMAP5. OMAP5 has an
-	  additional register to power on USB3 PHY.
-
 config AM335X_CONTROL_USB
 	tristate
 
diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile
index 15f1878..f8fa719 100644
--- a/drivers/usb/phy/Makefile
+++ b/drivers/usb/phy/Makefile
@@ -13,7 +13,6 @@
 obj-$(CONFIG_MV_U3D_PHY)		+= phy-mv-u3d-usb.o
 obj-$(CONFIG_NOP_USB_XCEIV)		+= phy-generic.o
 obj-$(CONFIG_TAHVO_USB)			+= phy-tahvo.o
-obj-$(CONFIG_OMAP_CONTROL_USB)		+= phy-omap-control.o
 obj-$(CONFIG_AM335X_CONTROL_USB)	+= phy-am335x-control.o
 obj-$(CONFIG_AM335X_PHY_USB)		+= phy-am335x.o
 obj-$(CONFIG_OMAP_OTG)			+= phy-omap-otg.o
diff --git a/drivers/usb/phy/phy-omap-control.c b/drivers/usb/phy/phy-omap-control.c
deleted file mode 100644
index e725318..0000000
--- a/drivers/usb/phy/phy-omap-control.c
+++ /dev/null
@@ -1,319 +0,0 @@
-/*
- * omap-control-usb.c - The USB part of control module.
- *
- * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * Author: Kishon Vijay Abraham I <kishon@ti.com>
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-#include <linux/of.h>
-#include <linux/of_device.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/clk.h>
-#include <linux/usb/omap_control_usb.h>
-
-/**
- * omap_control_usb_phy_power - power on/off the phy using control module reg
- * @dev: the control module device
- * @on: 0 or 1, based on powering on or off the PHY
- */
-void omap_control_usb_phy_power(struct device *dev, int on)
-{
-	u32 val;
-	unsigned long rate;
-	struct omap_control_usb	*control_usb;
-
-	if (IS_ERR(dev) || !dev) {
-		pr_err("%s: invalid device\n", __func__);
-		return;
-	}
-
-	control_usb = dev_get_drvdata(dev);
-	if (!control_usb) {
-		dev_err(dev, "%s: invalid control usb device\n", __func__);
-		return;
-	}
-
-	if (control_usb->type == OMAP_CTRL_TYPE_OTGHS)
-		return;
-
-	val = readl(control_usb->power);
-
-	switch (control_usb->type) {
-	case OMAP_CTRL_TYPE_USB2:
-		if (on)
-			val &= ~OMAP_CTRL_DEV_PHY_PD;
-		else
-			val |= OMAP_CTRL_DEV_PHY_PD;
-		break;
-
-	case OMAP_CTRL_TYPE_PIPE3:
-		rate = clk_get_rate(control_usb->sys_clk);
-		rate = rate/1000000;
-
-		if (on) {
-			val &= ~(OMAP_CTRL_USB_PWRCTL_CLK_CMD_MASK |
-					OMAP_CTRL_USB_PWRCTL_CLK_FREQ_MASK);
-			val |= OMAP_CTRL_USB3_PHY_TX_RX_POWERON <<
-				OMAP_CTRL_USB_PWRCTL_CLK_CMD_SHIFT;
-			val |= rate << OMAP_CTRL_USB_PWRCTL_CLK_FREQ_SHIFT;
-		} else {
-			val &= ~OMAP_CTRL_USB_PWRCTL_CLK_CMD_MASK;
-			val |= OMAP_CTRL_USB3_PHY_TX_RX_POWEROFF <<
-				OMAP_CTRL_USB_PWRCTL_CLK_CMD_SHIFT;
-		}
-		break;
-
-	case OMAP_CTRL_TYPE_DRA7USB2:
-		if (on)
-			val &= ~OMAP_CTRL_USB2_PHY_PD;
-		else
-			val |= OMAP_CTRL_USB2_PHY_PD;
-		break;
-
-	case OMAP_CTRL_TYPE_AM437USB2:
-		if (on) {
-			val &= ~(AM437X_CTRL_USB2_PHY_PD |
-					AM437X_CTRL_USB2_OTG_PD);
-			val |= (AM437X_CTRL_USB2_OTGVDET_EN |
-					AM437X_CTRL_USB2_OTGSESSEND_EN);
-		} else {
-			val &= ~(AM437X_CTRL_USB2_OTGVDET_EN |
-					AM437X_CTRL_USB2_OTGSESSEND_EN);
-			val |= (AM437X_CTRL_USB2_PHY_PD |
-					 AM437X_CTRL_USB2_OTG_PD);
-		}
-		break;
-	default:
-		dev_err(dev, "%s: type %d not recognized\n",
-					__func__, control_usb->type);
-		break;
-	}
-
-	writel(val, control_usb->power);
-}
-EXPORT_SYMBOL_GPL(omap_control_usb_phy_power);
-
-/**
- * omap_control_usb_host_mode - set AVALID, VBUSVALID and ID pin in grounded
- * @ctrl_usb: struct omap_control_usb *
- *
- * Writes to the mailbox register to notify the usb core that a usb
- * device has been connected.
- */
-static void omap_control_usb_host_mode(struct omap_control_usb *ctrl_usb)
-{
-	u32 val;
-
-	val = readl(ctrl_usb->otghs_control);
-	val &= ~(OMAP_CTRL_DEV_IDDIG | OMAP_CTRL_DEV_SESSEND);
-	val |= OMAP_CTRL_DEV_AVALID | OMAP_CTRL_DEV_VBUSVALID;
-	writel(val, ctrl_usb->otghs_control);
-}
-
-/**
- * omap_control_usb_device_mode - set AVALID, VBUSVALID and ID pin in high
- * impedance
- * @ctrl_usb: struct omap_control_usb *
- *
- * Writes to the mailbox register to notify the usb core that it has been
- * connected to a usb host.
- */
-static void omap_control_usb_device_mode(struct omap_control_usb *ctrl_usb)
-{
-	u32 val;
-
-	val = readl(ctrl_usb->otghs_control);
-	val &= ~OMAP_CTRL_DEV_SESSEND;
-	val |= OMAP_CTRL_DEV_IDDIG | OMAP_CTRL_DEV_AVALID |
-		OMAP_CTRL_DEV_VBUSVALID;
-	writel(val, ctrl_usb->otghs_control);
-}
-
-/**
- * omap_control_usb_set_sessionend - Enable SESSIONEND and IDIG to high
- * impedance
- * @ctrl_usb: struct omap_control_usb *
- *
- * Writes to the mailbox register to notify the usb core it's now in
- * disconnected state.
- */
-static void omap_control_usb_set_sessionend(struct omap_control_usb *ctrl_usb)
-{
-	u32 val;
-
-	val = readl(ctrl_usb->otghs_control);
-	val &= ~(OMAP_CTRL_DEV_AVALID | OMAP_CTRL_DEV_VBUSVALID);
-	val |= OMAP_CTRL_DEV_IDDIG | OMAP_CTRL_DEV_SESSEND;
-	writel(val, ctrl_usb->otghs_control);
-}
-
-/**
- * omap_control_usb_set_mode - Calls to functions to set USB in one of host mode
- * or device mode or to denote disconnected state
- * @dev: the control module device
- * @mode: The mode to which usb should be configured
- *
- * This is an API to write to the mailbox register to notify the usb core that
- * a usb device has been connected.
- */
-void omap_control_usb_set_mode(struct device *dev,
-	enum omap_control_usb_mode mode)
-{
-	struct omap_control_usb	*ctrl_usb;
-
-	if (IS_ERR(dev) || !dev)
-		return;
-
-	ctrl_usb = dev_get_drvdata(dev);
-
-	if (!ctrl_usb) {
-		dev_err(dev, "Invalid control usb device\n");
-		return;
-	}
-
-	if (ctrl_usb->type != OMAP_CTRL_TYPE_OTGHS)
-		return;
-
-	switch (mode) {
-	case USB_MODE_HOST:
-		omap_control_usb_host_mode(ctrl_usb);
-		break;
-	case USB_MODE_DEVICE:
-		omap_control_usb_device_mode(ctrl_usb);
-		break;
-	case USB_MODE_DISCONNECT:
-		omap_control_usb_set_sessionend(ctrl_usb);
-		break;
-	default:
-		dev_vdbg(dev, "invalid omap control usb mode\n");
-	}
-}
-EXPORT_SYMBOL_GPL(omap_control_usb_set_mode);
-
-#ifdef CONFIG_OF
-
-static const enum omap_control_usb_type otghs_data = OMAP_CTRL_TYPE_OTGHS;
-static const enum omap_control_usb_type usb2_data = OMAP_CTRL_TYPE_USB2;
-static const enum omap_control_usb_type pipe3_data = OMAP_CTRL_TYPE_PIPE3;
-static const enum omap_control_usb_type dra7usb2_data = OMAP_CTRL_TYPE_DRA7USB2;
-static const enum omap_control_usb_type am437usb2_data = OMAP_CTRL_TYPE_AM437USB2;
-
-static const struct of_device_id omap_control_usb_id_table[] = {
-	{
-		.compatible = "ti,control-phy-otghs",
-		.data = &otghs_data,
-	},
-	{
-		.compatible = "ti,control-phy-usb2",
-		.data = &usb2_data,
-	},
-	{
-		.compatible = "ti,control-phy-pipe3",
-		.data = &pipe3_data,
-	},
-	{
-		.compatible = "ti,control-phy-dra7usb2",
-		.data = &dra7usb2_data,
-	},
-	{
-		.compatible = "ti,control-phy-am437usb2",
-		.data = &am437usb2_data,
-	},
-	{},
-};
-MODULE_DEVICE_TABLE(of, omap_control_usb_id_table);
-#endif
-
-
-static int omap_control_usb_probe(struct platform_device *pdev)
-{
-	struct resource	*res;
-	const struct of_device_id *of_id;
-	struct omap_control_usb *control_usb;
-
-	of_id = of_match_device(of_match_ptr(omap_control_usb_id_table),
-								&pdev->dev);
-	if (!of_id)
-		return -EINVAL;
-
-	control_usb = devm_kzalloc(&pdev->dev, sizeof(*control_usb),
-		GFP_KERNEL);
-	if (!control_usb) {
-		dev_err(&pdev->dev, "unable to alloc memory for control usb\n");
-		return -ENOMEM;
-	}
-
-	control_usb->dev = &pdev->dev;
-	control_usb->type = *(enum omap_control_usb_type *)of_id->data;
-
-	if (control_usb->type == OMAP_CTRL_TYPE_OTGHS) {
-		res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
-			"otghs_control");
-		control_usb->otghs_control = devm_ioremap_resource(
-			&pdev->dev, res);
-		if (IS_ERR(control_usb->otghs_control))
-			return PTR_ERR(control_usb->otghs_control);
-	} else {
-		res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
-				"power");
-		control_usb->power = devm_ioremap_resource(&pdev->dev, res);
-		if (IS_ERR(control_usb->power)) {
-			dev_err(&pdev->dev, "Couldn't get power register\n");
-			return PTR_ERR(control_usb->power);
-		}
-	}
-
-	if (control_usb->type == OMAP_CTRL_TYPE_PIPE3) {
-		control_usb->sys_clk = devm_clk_get(control_usb->dev,
-			"sys_clkin");
-		if (IS_ERR(control_usb->sys_clk)) {
-			pr_err("%s: unable to get sys_clkin\n", __func__);
-			return -EINVAL;
-		}
-	}
-
-	dev_set_drvdata(control_usb->dev, control_usb);
-
-	return 0;
-}
-
-static struct platform_driver omap_control_usb_driver = {
-	.probe		= omap_control_usb_probe,
-	.driver		= {
-		.name	= "omap-control-usb",
-		.owner	= THIS_MODULE,
-		.of_match_table = of_match_ptr(omap_control_usb_id_table),
-	},
-};
-
-static int __init omap_control_usb_init(void)
-{
-	return platform_driver_register(&omap_control_usb_driver);
-}
-subsys_initcall(omap_control_usb_init);
-
-static void __exit omap_control_usb_exit(void)
-{
-	platform_driver_unregister(&omap_control_usb_driver);
-}
-module_exit(omap_control_usb_exit);
-
-MODULE_ALIAS("platform: omap_control_usb");
-MODULE_AUTHOR("Texas Instruments Inc.");
-MODULE_DESCRIPTION("OMAP Control Module USB Driver");
-MODULE_LICENSE("GPL v2");
diff --git a/include/linux/usb/omap_control_usb.h b/include/linux/phy/omap_control_phy.h
similarity index 67%
rename from include/linux/usb/omap_control_usb.h
rename to include/linux/phy/omap_control_phy.h
index 69ae383..5450403 100644
--- a/include/linux/usb/omap_control_usb.h
+++ b/include/linux/phy/omap_control_phy.h
@@ -1,5 +1,5 @@
 /*
- * omap_control_usb.h - Header file for the USB part of control module.
+ * omap_control_phy.h - Header file for the PHY part of control module.
  *
  * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com
  * This program is free software; you can redistribute it and/or modify
@@ -16,10 +16,10 @@
  *
  */
 
-#ifndef __OMAP_CONTROL_USB_H__
-#define __OMAP_CONTROL_USB_H__
+#ifndef __OMAP_CONTROL_PHY_H__
+#define __OMAP_CONTROL_PHY_H__
 
-enum omap_control_usb_type {
+enum omap_control_phy_type {
 	OMAP_CTRL_TYPE_OTGHS = 1,	/* Mailbox OTGHS_CONTROL */
 	OMAP_CTRL_TYPE_USB2,	/* USB2_PHY, power down in CONTROL_DEV_CONF */
 	OMAP_CTRL_TYPE_PIPE3,	/* PIPE3 PHY, DPLL & seperate Rx/Tx power */
@@ -27,7 +27,7 @@
 	OMAP_CTRL_TYPE_AM437USB2, /* USB2 PHY, power e.g. AM437x */
 };
 
-struct omap_control_usb {
+struct omap_control_phy {
 	struct device *dev;
 
 	u32 __iomem *otghs_control;
@@ -36,7 +36,7 @@
 
 	struct clk *sys_clk;
 
-	enum omap_control_usb_type type;
+	enum omap_control_phy_type type;
 };
 
 enum omap_control_usb_mode {
@@ -54,14 +54,14 @@
 #define	OMAP_CTRL_DEV_SESSEND		BIT(3)
 #define	OMAP_CTRL_DEV_IDDIG		BIT(4)
 
-#define	OMAP_CTRL_USB_PWRCTL_CLK_CMD_MASK	0x003FC000
-#define	OMAP_CTRL_USB_PWRCTL_CLK_CMD_SHIFT	0xE
+#define	OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_MASK		0x003FC000
+#define	OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_SHIFT	0xE
 
-#define	OMAP_CTRL_USB_PWRCTL_CLK_FREQ_MASK	0xFFC00000
-#define	OMAP_CTRL_USB_PWRCTL_CLK_FREQ_SHIFT	0x16
+#define	OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_FREQ_MASK	0xFFC00000
+#define	OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_FREQ_SHIFT	0x16
 
-#define	OMAP_CTRL_USB3_PHY_TX_RX_POWERON	0x3
-#define	OMAP_CTRL_USB3_PHY_TX_RX_POWEROFF	0x0
+#define	OMAP_CTRL_PIPE3_PHY_TX_RX_POWERON	0x3
+#define	OMAP_CTRL_PIPE3_PHY_TX_RX_POWEROFF	0x0
 
 #define OMAP_CTRL_USB2_PHY_PD		BIT(28)
 
@@ -70,13 +70,13 @@
 #define AM437X_CTRL_USB2_OTGVDET_EN	BIT(19)
 #define AM437X_CTRL_USB2_OTGSESSEND_EN	BIT(20)
 
-#if IS_ENABLED(CONFIG_OMAP_CONTROL_USB)
-extern void omap_control_usb_phy_power(struct device *dev, int on);
-extern void omap_control_usb_set_mode(struct device *dev,
-	enum omap_control_usb_mode mode);
+#if IS_ENABLED(CONFIG_OMAP_CONTROL_PHY)
+void omap_control_phy_power(struct device *dev, int on);
+void omap_control_usb_set_mode(struct device *dev,
+			       enum omap_control_usb_mode mode);
 #else
 
-static inline void omap_control_usb_phy_power(struct device *dev, int on)
+static inline void omap_control_phy_power(struct device *dev, int on)
 {
 }
 
@@ -86,4 +86,4 @@
 }
 #endif
 
-#endif	/* __OMAP_CONTROL_USB_H__ */
+#endif	/* __OMAP_CONTROL_PHY_H__ */