ide: use PIO/MMIO operations directly where possible (v2)
This results in smaller/faster/simpler code and allows future optimizations.
Also remove no longer needed ide[_mm]_{inl,outl}() and ide_hwif_t.{INL,OUTL}.
v2:
* updated for scc_pata
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
diff --git a/drivers/ide/pci/cs5530.c b/drivers/ide/pci/cs5530.c
index 98f2601..68b5d27 100644
--- a/drivers/ide/pci/cs5530.c
+++ b/drivers/ide/pci/cs5530.c
@@ -81,8 +81,8 @@
pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
if (!cs5530_set_xfer_mode(drive, modes[pio])) {
- format = (hwif->INL(basereg+4) >> 31) & 1;
- hwif->OUTL(cs5530_pio_timings[format][pio],
+ format = (inl(basereg + 4) >> 31) & 1;
+ outl(cs5530_pio_timings[format][pio],
basereg+(drive->select.b.unit<<3));
}
}
@@ -183,17 +183,17 @@
break;
}
basereg = CS5530_BASEREG(hwif);
- reg = hwif->INL(basereg+4); /* get drive0 config register */
+ reg = inl(basereg + 4); /* get drive0 config register */
timings |= reg & 0x80000000; /* preserve PIO format bit */
if (unit == 0) { /* are we configuring drive0? */
- hwif->OUTL(timings, basereg+4); /* write drive0 config register */
+ outl(timings, basereg + 4); /* write drive0 config register */
} else {
if (timings & 0x00100000)
reg |= 0x00100000; /* enable UDMA timings for both drives */
else
reg &= ~0x00100000; /* disable UDMA timings for both drives */
- hwif->OUTL(reg, basereg+4); /* write drive0 config register */
- hwif->OUTL(timings, basereg+12); /* write drive1 config register */
+ outl(reg, basereg + 4); /* write drive0 config register */
+ outl(timings, basereg + 12); /* write drive1 config register */
}
/*
@@ -315,17 +315,17 @@
hwif->tuneproc = &cs5530_tuneproc;
basereg = CS5530_BASEREG(hwif);
- d0_timings = hwif->INL(basereg+0);
+ d0_timings = inl(basereg + 0);
if (CS5530_BAD_PIO(d0_timings)) {
/* PIO timings not initialized? */
- hwif->OUTL(cs5530_pio_timings[(d0_timings>>31)&1][0], basereg+0);
+ outl(cs5530_pio_timings[(d0_timings >> 31) & 1][0], basereg + 0);
if (!hwif->drives[0].autotune)
hwif->drives[0].autotune = 1;
/* needs autotuning later */
}
- if (CS5530_BAD_PIO(hwif->INL(basereg+8))) {
- /* PIO timings not initialized? */
- hwif->OUTL(cs5530_pio_timings[(d0_timings>>31)&1][0], basereg+8);
+ if (CS5530_BAD_PIO(inl(basereg + 8))) {
+ /* PIO timings not initialized? */
+ outl(cs5530_pio_timings[(d0_timings >> 31) & 1][0], basereg + 8);
if (!hwif->drives[1].autotune)
hwif->drives[1].autotune = 1;
/* needs autotuning later */