brcmfmac: use fwil for default configuration setup.
modify the setup code to use the refactored firmware interface layer.
Reviewed-by: Arend Van Spriel <arend@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c
index b1f26b5..2976523 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c
@@ -950,8 +950,6 @@
int brcmf_bus_start(struct device *dev)
{
int ret = -1;
- /* Room for "event_msgs" + '\0' + bitvec */
- char iovbuf[BRCMF_EVENTING_MASK_LEN + 12];
struct brcmf_bus *bus_if = dev_get_drvdata(dev);
struct brcmf_pub *drvr = bus_if->drvr;
struct brcmf_if *ifp;
@@ -965,43 +963,16 @@
return ret;
}
- brcmf_c_mkiovar("event_msgs", drvr->eventmask, BRCMF_EVENTING_MASK_LEN,
- iovbuf, sizeof(iovbuf));
- brcmf_proto_cdc_query_dcmd(drvr, 0, BRCMF_C_GET_VAR, iovbuf,
- sizeof(iovbuf));
- memcpy(drvr->eventmask, iovbuf, BRCMF_EVENTING_MASK_LEN);
-
- setbit(drvr->eventmask, BRCMF_E_SET_SSID);
- setbit(drvr->eventmask, BRCMF_E_PRUNE);
- setbit(drvr->eventmask, BRCMF_E_AUTH);
- setbit(drvr->eventmask, BRCMF_E_REASSOC);
- setbit(drvr->eventmask, BRCMF_E_REASSOC_IND);
- setbit(drvr->eventmask, BRCMF_E_DEAUTH_IND);
- setbit(drvr->eventmask, BRCMF_E_DISASSOC_IND);
- setbit(drvr->eventmask, BRCMF_E_DISASSOC);
- setbit(drvr->eventmask, BRCMF_E_JOIN);
- setbit(drvr->eventmask, BRCMF_E_ASSOC_IND);
- setbit(drvr->eventmask, BRCMF_E_PSK_SUP);
- setbit(drvr->eventmask, BRCMF_E_LINK);
- setbit(drvr->eventmask, BRCMF_E_NDIS_LINK);
- setbit(drvr->eventmask, BRCMF_E_MIC_ERROR);
- setbit(drvr->eventmask, BRCMF_E_PMKID_CACHE);
- setbit(drvr->eventmask, BRCMF_E_TXFAIL);
- setbit(drvr->eventmask, BRCMF_E_JOIN_START);
- setbit(drvr->eventmask, BRCMF_E_SCAN_COMPLETE);
- setbit(drvr->eventmask, BRCMF_E_IF);
-
- /* Setup filter to allow only unicast */
- drvr->pktfilter_count = 1;
- drvr->pktfilter[0] = "100 0 0 0 0x01 0x00";
-
/* add primary networking interface */
- ifp = brcmf_add_if(dev, 0, 0, "wlan%d", drvr->mac);
+ ifp = brcmf_add_if(dev, 0, 0, "wlan%d", NULL);
if (IS_ERR(ifp))
return PTR_ERR(ifp);
- /* Bus is ready, do any protocol initialization */
- ret = brcmf_proto_init(drvr);
+ /* signal bus ready */
+ bus_if->state = BRCMF_BUS_DATA;
+
+ /* Bus is ready, do any initialization */
+ ret = brcmf_c_preinit_dcmds(ifp);
if (ret < 0)
return ret;
@@ -1016,9 +987,6 @@
return ret;
}
-
- /* signal bus ready */
- bus_if->state = BRCMF_BUS_DATA;
return 0;
}