clk/exynos5250: add mout_hdmi mux clock for hdmi
hdmi driver needs to change the parent of hdmi clock
frequently between pixel clock and hdmiphy clock. hdmiphy is
not stable after power on and for a short interval while changing
the phy configuration. For this duration pixel clock is used to
clock hdmi.
This patch is exposing the mux for changing parent.
Upstream commit ID: 4a453314883d
Signed-off-by: Rahul Sharma <rahul.sharma@samsung.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
diff --git a/Documentation/devicetree/bindings/clock/exynos5250-clock.txt b/Documentation/devicetree/bindings/clock/exynos5250-clock.txt
index 1a05761..b337147 100644
--- a/Documentation/devicetree/bindings/clock/exynos5250-clock.txt
+++ b/Documentation/devicetree/bindings/clock/exynos5250-clock.txt
@@ -156,6 +156,14 @@
mixer 343
hdmi 344
+
+ [Clock Muxes]
+
+ Clock ID
+ ----------------------------
+ mout_hdmi 1024
+
+
Example 1: An example of a clock controller node is listed below.
clock: clock-controller@0x10010000 {
diff --git a/drivers/clk/samsung/clk-exynos5250.c b/drivers/clk/samsung/clk-exynos5250.c
index 92afc06..87cccdf 100644
--- a/drivers/clk/samsung/clk-exynos5250.c
+++ b/drivers/clk/samsung/clk-exynos5250.c
@@ -100,6 +100,9 @@
tzpc2, tzpc3, tzpc4, tzpc5, tzpc6, tzpc7, tzpc8, tzpc9, hdmi_cec, mct,
wdt, rtc, tmu, fimd1, mie1, dsim0, dp, mixer, hdmi,
+ /* mux clocks */
+ mout_hdmi = 1024,
+
nr_clks,
};
@@ -231,7 +234,7 @@
MUX(none, "mout_fimd1", mout_group1_p, SRC_DISP1_0, 0, 4),
MUX(none, "mout_mipi1", mout_group1_p, SRC_DISP1_0, 12, 4),
MUX(none, "mout_dp", mout_group1_p, SRC_DISP1_0, 16, 4),
- MUX(none, "mout_hdmi", mout_hdmi_p, SRC_DISP1_0, 20, 1),
+ MUX(mout_hdmi, "mout_hdmi", mout_hdmi_p, SRC_DISP1_0, 20, 1),
MUX(none, "mout_audio0", mout_audio0_p, SRC_MAU, 0, 4),
MUX(none, "mout_mmc0", mout_group1_p, SRC_FSYS, 0, 4),
MUX(none, "mout_mmc1", mout_group1_p, SRC_FSYS, 4, 4),