mfd: AB3100 register access change to abx500 API
The interface for the AB3100 is changed to make way for the
ABX500 family of chips: AB3550, AB5500 and future ST-Ericsson
Analog Baseband chips. The register access functions are moved
out to a separate struct abx500_ops. In this way the interface
is moved from the implementation and the sub functionality drivers
can keep their interface intact when chip infrastructure and
communication mechanisms changes. We also define the AB3550
device IDs and the AB3550 platform data struct and convert
the catenated 32bit event to an array of 3 x 8bits.
Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
diff --git a/drivers/mfd/ab3100-core.c b/drivers/mfd/ab3100-core.c
index f8c4a33..53ebfee 100644
--- a/drivers/mfd/ab3100-core.c
+++ b/drivers/mfd/ab3100-core.c
@@ -59,24 +59,15 @@
* The AB3100 is usually assigned address 0x48 (7-bit)
* The chip is defined in the platform i2c_board_data section.
*/
-
-u8 ab3100_get_chip_type(struct ab3100 *ab3100)
+static int ab3100_get_chip_id(struct device *dev)
{
- u8 chip = ABUNKNOWN;
+ struct ab3100 *ab3100 = dev_get_drvdata(dev->parent);
- switch (ab3100->chip_id & 0xf0) {
- case 0xa0:
- chip = AB3000;
- break;
- case 0xc0:
- chip = AB3100;
- break;
- }
- return chip;
+ return (int)ab3100->chip_id;
}
-EXPORT_SYMBOL(ab3100_get_chip_type);
-int ab3100_set_register_interruptible(struct ab3100 *ab3100, u8 reg, u8 regval)
+static int ab3100_set_register_interruptible(struct ab3100 *ab3100,
+ u8 reg, u8 regval)
{
u8 regandval[2] = {reg, regval};
int err;
@@ -108,8 +99,14 @@
mutex_unlock(&ab3100->access_mutex);
return err;
}
-EXPORT_SYMBOL(ab3100_set_register_interruptible);
+static int set_register_interruptible(struct device *dev,
+ u8 bank, u8 reg, u8 value)
+{
+ struct ab3100 *ab3100 = dev_get_drvdata(dev->parent);
+
+ return ab3100_set_register_interruptible(ab3100, reg, value);
+}
/*
* The test registers exist at an I2C bus address up one
@@ -148,8 +145,8 @@
return err;
}
-
-int ab3100_get_register_interruptible(struct ab3100 *ab3100, u8 reg, u8 *regval)
+static int ab3100_get_register_interruptible(struct ab3100 *ab3100,
+ u8 reg, u8 *regval)
{
int err;
@@ -203,10 +200,16 @@
mutex_unlock(&ab3100->access_mutex);
return err;
}
-EXPORT_SYMBOL(ab3100_get_register_interruptible);
+static int get_register_interruptible(struct device *dev, u8 bank, u8 reg,
+ u8 *value)
+{
+ struct ab3100 *ab3100 = dev_get_drvdata(dev->parent);
-int ab3100_get_register_page_interruptible(struct ab3100 *ab3100,
+ return ab3100_get_register_interruptible(ab3100, reg, value);
+}
+
+static int ab3100_get_register_page_interruptible(struct ab3100 *ab3100,
u8 first_reg, u8 *regvals, u8 numregs)
{
int err;
@@ -260,10 +263,17 @@
mutex_unlock(&ab3100->access_mutex);
return err;
}
-EXPORT_SYMBOL(ab3100_get_register_page_interruptible);
+static int get_register_page_interruptible(struct device *dev, u8 bank,
+ u8 first_reg, u8 *regvals, u8 numregs)
+{
+ struct ab3100 *ab3100 = dev_get_drvdata(dev->parent);
-int ab3100_mask_and_set_register_interruptible(struct ab3100 *ab3100,
+ return ab3100_get_register_page_interruptible(ab3100,
+ first_reg, regvals, numregs);
+}
+
+static int ab3100_mask_and_set_register_interruptible(struct ab3100 *ab3100,
u8 reg, u8 andmask, u8 ormask)
{
u8 regandval[2] = {reg, 0};
@@ -331,8 +341,15 @@
mutex_unlock(&ab3100->access_mutex);
return err;
}
-EXPORT_SYMBOL(ab3100_mask_and_set_register_interruptible);
+static int mask_and_set_register_interruptible(struct device *dev, u8 bank,
+ u8 reg, u8 bitmask, u8 bitvalues)
+{
+ struct ab3100 *ab3100 = dev_get_drvdata(dev->parent);
+
+ return ab3100_mask_and_set_register_interruptible(ab3100,
+ reg, bitmask, (bitmask & bitvalues));
+}
/*
* Register a simple callback for handling any AB3100 events.
@@ -357,15 +374,27 @@
EXPORT_SYMBOL(ab3100_event_unregister);
-int ab3100_event_registers_startup_state_get(struct ab3100 *ab3100,
- u32 *fatevent)
+static int ab3100_event_registers_startup_state_get(struct device *dev,
+ u8 *event)
{
+ struct ab3100 *ab3100 = dev_get_drvdata(dev->parent);
if (!ab3100->startup_events_read)
return -EAGAIN; /* Try again later */
- *fatevent = ab3100->startup_events;
+ memcpy(event, ab3100->startup_events, 3);
return 0;
}
-EXPORT_SYMBOL(ab3100_event_registers_startup_state_get);
+
+static struct abx500_ops ab3100_ops = {
+ .get_chip_id = ab3100_get_chip_id,
+ .set_register = set_register_interruptible,
+ .get_register = get_register_interruptible,
+ .get_register_page = get_register_page_interruptible,
+ .set_register_page = NULL,
+ .mask_and_set_register = mask_and_set_register_interruptible,
+ .event_registers_startup_state_get =
+ ab3100_event_registers_startup_state_get,
+ .startup_irq_enabled = NULL,
+};
/*
* This is a threaded interrupt handler so we can make some
@@ -390,7 +419,9 @@
event_regs[2];
if (!ab3100->startup_events_read) {
- ab3100->startup_events = fatevent;
+ ab3100->startup_events[0] = event_regs[0];
+ ab3100->startup_events[1] = event_regs[1];
+ ab3100->startup_events[2] = event_regs[2];
ab3100->startup_events_read = true;
}
/*
@@ -703,7 +734,8 @@
dev_warn(ab3100->dev,
"AB3100 P1E variant detected, "
"forcing chip to 32KHz\n");
- err = ab3100_set_test_register_interruptible(ab3100, 0x02, 0x08);
+ err = ab3100_set_test_register_interruptible(ab3100,
+ 0x02, 0x08);
}
exit_no_setup:
@@ -898,6 +930,10 @@
if (err)
goto exit_no_irq;
+ err = abx500_register_ops(&client->dev, &ab3100_ops);
+ if (err)
+ goto exit_no_ops;
+
/* Set parent and a pointer back to the container in device data */
for (i = 0; i < ARRAY_SIZE(ab3100_platform_devs); i++) {
ab3100_platform_devs[i]->dev.parent =
@@ -915,6 +951,7 @@
return 0;
+ exit_no_ops:
exit_no_irq:
exit_no_setup:
i2c_unregister_device(ab3100->testreg_client);