Patch by Kenneth Johansson, 30 Jun 2003:
get rid of MK_CMD_ENTRY macro; update doc/README.command
diff --git a/common/cmd_i2c.c b/common/cmd_i2c.c
index 203e803..3856f3d 100644
--- a/common/cmd_i2c.c
+++ b/common/cmd_i2c.c
@@ -867,38 +867,38 @@
/***************************************************/
-cmd_tbl_t U_BOOT_CMD(IMD) = MK_CMD_ENTRY(
- "imd", 4, 1, do_i2c_md, \
+U_BOOT_CMD(
+ imd, 4, 1, do_i2c_md, \
"imd - i2c memory display\n", \
"chip address[.0, .1, .2] [# of objects]\n - i2c memory display\n" \
);
-cmd_tbl_t U_BOOT_CMD(IMM) = MK_CMD_ENTRY(
- "imm", 3, 1, do_i2c_mm,
+U_BOOT_CMD(
+ imm, 3, 1, do_i2c_mm,
"imm - i2c memory modify (auto-incrementing)\n",
"chip address[.0, .1, .2]\n"
" - memory modify, auto increment address\n"
);
-cmd_tbl_t U_BOOT_CMD(INM) = MK_CMD_ENTRY(
- "inm", 3, 1, do_i2c_nm,
+U_BOOT_CMD(
+ inm, 3, 1, do_i2c_nm,
"inm - memory modify (constant address)\n",
"chip address[.0, .1, .2]\n - memory modify, read and keep address\n"
);
-cmd_tbl_t U_BOOT_CMD(IMW) = MK_CMD_ENTRY(
- "imw", 5, 1, do_i2c_mw,
+U_BOOT_CMD(
+ imw, 5, 1, do_i2c_mw,
"imw - memory write (fill)\n",
"chip address[.0, .1, .2] value [count]\n - memory write (fill)\n"
);
-cmd_tbl_t U_BOOT_CMD(ICRC) = MK_CMD_ENTRY(
- "icrc32", 5, 1, do_i2c_crc,
+U_BOOT_CMD(
+ icrc32, 5, 1, do_i2c_crc,
"icrc32 - checksum calculation\n",
"chip address[.0, .1, .2] count\n - compute CRC32 checksum\n"
);
-cmd_tbl_t U_BOOT_CMD(IPROBE) = MK_CMD_ENTRY(
- "iprobe", 1, 1, do_i2c_probe,
+U_BOOT_CMD(
+ iprobe, 1, 1, do_i2c_probe,
"iprobe - probe to discover valid I2C chip addresses\n",
"\n -discover valid I2C chip addresses\n"
);
@@ -906,16 +906,16 @@
/*
* Require full name for "iloop" because it is an infinite loop!
*/
-cmd_tbl_t U_BOOT_CMD(ILOOP) = MK_CMD_ENTRY(
- "iloop", 5, 1, do_i2c_loop,
+U_BOOT_CMD(
+ iloop, 5, 1, do_i2c_loop,
"iloop - infinite loop on address range\n",
"chip address[.0, .1, .2] [# of objects]\n"
" - loop, reading a set of addresses\n"
);
#if (CONFIG_COMMANDS & CFG_CMD_SDRAM)
-cmd_tbl_t U_BOOT_CMD(ISDRAM) = MK_CMD_ENTRY(
- "isdram", 2, 1, do_sdram,
+U_BOOT_CMD(
+ isdram, 2, 1, do_sdram,
"isdram - print SDRAM configuration information\n",
"chip\n - print SDRAM configuration information\n"
" (valid chip values 50..57)\n"