From 3b4bd47f8f4ed3aaf7c81c9b5d2d37ad79fadf4a Mon Sep 17 00:00:00 2001 From: Fathi Boudra Date: Sun, 28 Apr 2013 09:33:08 +0300 Subject: Imported Upstream version 3.9.0 --- Documentation/i2c/busses/i2c-ali1535 | 42 +++++++ Documentation/i2c/busses/i2c-ali1563 | 27 +++++ Documentation/i2c/busses/i2c-ali15x3 | 112 ++++++++++++++++++ Documentation/i2c/busses/i2c-amd756 | 25 ++++ Documentation/i2c/busses/i2c-amd8111 | 41 +++++++ Documentation/i2c/busses/i2c-diolan-u2c | 26 +++++ Documentation/i2c/busses/i2c-i801 | 158 +++++++++++++++++++++++++ Documentation/i2c/busses/i2c-ismt | 36 ++++++ Documentation/i2c/busses/i2c-nforce2 | 50 ++++++++ Documentation/i2c/busses/i2c-ocores | 68 +++++++++++ Documentation/i2c/busses/i2c-parport | 177 +++++++++++++++++++++++++++++ Documentation/i2c/busses/i2c-parport-light | 22 ++++ Documentation/i2c/busses/i2c-pca-isa | 23 ++++ Documentation/i2c/busses/i2c-piix4 | 109 ++++++++++++++++++ Documentation/i2c/busses/i2c-sis5595 | 59 ++++++++++ Documentation/i2c/busses/i2c-sis630 | 58 ++++++++++ Documentation/i2c/busses/i2c-sis96x | 73 ++++++++++++ Documentation/i2c/busses/i2c-taos-evm | 46 ++++++++ Documentation/i2c/busses/i2c-via | 34 ++++++ Documentation/i2c/busses/i2c-viapro | 73 ++++++++++++ Documentation/i2c/busses/scx200_acb | 32 ++++++ 21 files changed, 1291 insertions(+) create mode 100644 Documentation/i2c/busses/i2c-ali1535 create mode 100644 Documentation/i2c/busses/i2c-ali1563 create mode 100644 Documentation/i2c/busses/i2c-ali15x3 create mode 100644 Documentation/i2c/busses/i2c-amd756 create mode 100644 Documentation/i2c/busses/i2c-amd8111 create mode 100644 Documentation/i2c/busses/i2c-diolan-u2c create mode 100644 Documentation/i2c/busses/i2c-i801 create mode 100644 Documentation/i2c/busses/i2c-ismt create mode 100644 Documentation/i2c/busses/i2c-nforce2 create mode 100644 Documentation/i2c/busses/i2c-ocores create mode 100644 Documentation/i2c/busses/i2c-parport create mode 100644 Documentation/i2c/busses/i2c-parport-light create mode 100644 Documentation/i2c/busses/i2c-pca-isa create mode 100644 Documentation/i2c/busses/i2c-piix4 create mode 100644 Documentation/i2c/busses/i2c-sis5595 create mode 100644 Documentation/i2c/busses/i2c-sis630 create mode 100644 Documentation/i2c/busses/i2c-sis96x create mode 100644 Documentation/i2c/busses/i2c-taos-evm create mode 100644 Documentation/i2c/busses/i2c-via create mode 100644 Documentation/i2c/busses/i2c-viapro create mode 100644 Documentation/i2c/busses/scx200_acb (limited to 'Documentation/i2c/busses') diff --git a/Documentation/i2c/busses/i2c-ali1535 b/Documentation/i2c/busses/i2c-ali1535 new file mode 100644 index 00000000..5d46342e --- /dev/null +++ b/Documentation/i2c/busses/i2c-ali1535 @@ -0,0 +1,42 @@ +Kernel driver i2c-ali1535 + +Supported adapters: + * Acer Labs, Inc. ALI 1535 (south bridge) + Datasheet: Now under NDA + http://www.ali.com.tw/ + +Authors: + Frodo Looijaard , + Philip Edelbrock , + Mark D. Studebaker , + Dan Eaton , + Stephen Rousset + +Description +----------- + +This is the driver for the SMB Host controller on Acer Labs Inc. (ALI) +M1535 South Bridge. + +The M1535 is a South bridge for portable systems. It is very similar to the +M15x3 South bridges also produced by Acer Labs Inc. Some of the registers +within the part have moved and some have been redefined slightly. +Additionally, the sequencing of the SMBus transactions has been modified to +be more consistent with the sequencing recommended by the manufacturer and +observed through testing. These changes are reflected in this driver and +can be identified by comparing this driver to the i2c-ali15x3 driver. For +an overview of these chips see http://www.acerlabs.com + +The SMB controller is part of the M7101 device, which is an ACPI-compliant +Power Management Unit (PMU). + +The whole M7101 device has to be enabled for the SMB to work. You can't +just enable the SMB alone. The SMB and the ACPI have separate I/O spaces. +We make sure that the SMB is enabled. We leave the ACPI alone. + + +Features +-------- + +This driver controls the SMB Host only. This driver does not use +interrupts. diff --git a/Documentation/i2c/busses/i2c-ali1563 b/Documentation/i2c/busses/i2c-ali1563 new file mode 100644 index 00000000..41b1a077 --- /dev/null +++ b/Documentation/i2c/busses/i2c-ali1563 @@ -0,0 +1,27 @@ +Kernel driver i2c-ali1563 + +Supported adapters: + * Acer Labs, Inc. ALI 1563 (south bridge) + Datasheet: Now under NDA + http://www.ali.com.tw/ + +Author: Patrick Mochel + +Description +----------- + +This is the driver for the SMB Host controller on Acer Labs Inc. (ALI) +M1563 South Bridge. + +For an overview of these chips see http://www.acerlabs.com + +The M1563 southbridge is deceptively similar to the M1533, with a few +notable exceptions. One of those happens to be the fact they upgraded the +i2c core to be SMBus 2.0 compliant, and happens to be almost identical to +the i2c controller found in the Intel 801 south bridges. + +Features +-------- + +This driver controls the SMB Host only. This driver does not use +interrupts. diff --git a/Documentation/i2c/busses/i2c-ali15x3 b/Documentation/i2c/busses/i2c-ali15x3 new file mode 100644 index 00000000..42888d8a --- /dev/null +++ b/Documentation/i2c/busses/i2c-ali15x3 @@ -0,0 +1,112 @@ +Kernel driver i2c-ali15x3 + +Supported adapters: + * Acer Labs, Inc. ALI 1533 and 1543C (south bridge) + Datasheet: Now under NDA + http://www.ali.com.tw/ + +Authors: + Frodo Looijaard , + Philip Edelbrock , + Mark D. Studebaker + +Module Parameters +----------------- + +* force_addr: int + Initialize the base address of the i2c controller + + +Notes +----- + +The force_addr parameter is useful for boards that don't set the address in +the BIOS. Does not do a PCI force; the device must still be present in +lspci. Don't use this unless the driver complains that the base address is +not set. + +Example: 'modprobe i2c-ali15x3 force_addr=0xe800' + +SMBus periodically hangs on ASUS P5A motherboards and can only be cleared +by a power cycle. Cause unknown (see Issues below). + + +Description +----------- + +This is the driver for the SMB Host controller on Acer Labs Inc. (ALI) +M1541 and M1543C South Bridges. + +The M1543C is a South bridge for desktop systems. +The M1541 is a South bridge for portable systems. +They are part of the following ALI chipsets: + + * "Aladdin Pro 2" includes the M1621 Slot 1 North bridge with AGP and + 100MHz CPU Front Side bus + * "Aladdin V" includes the M1541 Socket 7 North bridge with AGP and 100MHz + CPU Front Side bus + Some Aladdin V motherboards: + Asus P5A + Atrend ATC-5220 + BCM/GVC VP1541 + Biostar M5ALA + Gigabyte GA-5AX (** Generally doesn't work because the BIOS doesn't + enable the 7101 device! **) + Iwill XA100 Plus + Micronics C200 + Microstar (MSI) MS-5169 + + * "Aladdin IV" includes the M1541 Socket 7 North bridge + with host bus up to 83.3 MHz. + +For an overview of these chips see http://www.acerlabs.com. At this time the +full data sheets on the web site are password protected, however if you +contact the ALI office in San Jose they may give you the password. + +The M1533/M1543C devices appear as FOUR separate devices on the PCI bus. An +output of lspci will show something similar to the following: + + 00:02.0 USB Controller: Acer Laboratories Inc. M5237 (rev 03) + 00:03.0 Bridge: Acer Laboratories Inc. M7101 <= THIS IS THE ONE WE NEED + 00:07.0 ISA bridge: Acer Laboratories Inc. M1533 (rev c3) + 00:0f.0 IDE interface: Acer Laboratories Inc. M5229 (rev c1) + +** IMPORTANT ** +** If you have a M1533 or M1543C on the board and you get +** "ali15x3: Error: Can't detect ali15x3!" +** then run lspci. +** If you see the 1533 and 5229 devices but NOT the 7101 device, +** then you must enable ACPI, the PMU, SMB, or something similar +** in the BIOS. +** The driver won't work if it can't find the M7101 device. + +The SMB controller is part of the M7101 device, which is an ACPI-compliant +Power Management Unit (PMU). + +The whole M7101 device has to be enabled for the SMB to work. You can't +just enable the SMB alone. The SMB and the ACPI have separate I/O spaces. +We make sure that the SMB is enabled. We leave the ACPI alone. + +Features +-------- + +This driver controls the SMB Host only. The SMB Slave +controller on the M15X3 is not enabled. This driver does not use +interrupts. + + +Issues +------ + +This driver requests the I/O space for only the SMB +registers. It doesn't use the ACPI region. + +On the ASUS P5A motherboard, there are several reports that +the SMBus will hang and this can only be resolved by +powering off the computer. It appears to be worse when the board +gets hot, for example under heavy CPU load, or in the summer. +There may be electrical problems on this board. +On the P5A, the W83781D sensor chip is on both the ISA and +SMBus. Therefore the SMBus hangs can generally be avoided +by accessing the W83781D on the ISA bus only. + diff --git a/Documentation/i2c/busses/i2c-amd756 b/Documentation/i2c/busses/i2c-amd756 new file mode 100644 index 00000000..67f30874 --- /dev/null +++ b/Documentation/i2c/busses/i2c-amd756 @@ -0,0 +1,25 @@ +Kernel driver i2c-amd756 + +Supported adapters: + * AMD 756 + * AMD 766 + * AMD 768 + * AMD 8111 + Datasheets: Publicly available on AMD website + + * nVidia nForce + Datasheet: Unavailable + +Authors: + Frodo Looijaard , + Philip Edelbrock + +Description +----------- + +This driver supports the AMD 756, 766, 768 and 8111 Peripheral Bus +Controllers, and the nVidia nForce. + +Note that for the 8111, there are two SMBus adapters. The SMBus 1.0 adapter +is supported by this driver, and the SMBus 2.0 adapter is supported by the +i2c-amd8111 driver. diff --git a/Documentation/i2c/busses/i2c-amd8111 b/Documentation/i2c/busses/i2c-amd8111 new file mode 100644 index 00000000..460dd663 --- /dev/null +++ b/Documentation/i2c/busses/i2c-amd8111 @@ -0,0 +1,41 @@ +Kernel driver i2c-adm8111 + +Supported adapters: + * AMD-8111 SMBus 2.0 PCI interface + +Datasheets: + AMD datasheet not yet available, but almost everything can be found + in the publicly available ACPI 2.0 specification, which the adapter + follows. + +Author: Vojtech Pavlik + +Description +----------- + +If you see something like this: + +00:07.2 SMBus: Advanced Micro Devices [AMD] AMD-8111 SMBus 2.0 (rev 02) + Subsystem: Advanced Micro Devices [AMD] AMD-8111 SMBus 2.0 + Flags: medium devsel, IRQ 19 + I/O ports at d400 [size=32] + +in your 'lspci -v', then this driver is for your chipset. + +Process Call Support +-------------------- + +Supported. + +SMBus 2.0 Support +----------------- + +Supported. Both PEC and block process call support is implemented. Slave +mode or host notification are not yet implemented. + +Notes +----- + +Note that for the 8111, there are two SMBus adapters. The SMBus 2.0 adapter +is supported by this driver, and the SMBus 1.0 adapter is supported by the +i2c-amd756 driver. diff --git a/Documentation/i2c/busses/i2c-diolan-u2c b/Documentation/i2c/busses/i2c-diolan-u2c new file mode 100644 index 00000000..30fe4bb9 --- /dev/null +++ b/Documentation/i2c/busses/i2c-diolan-u2c @@ -0,0 +1,26 @@ +Kernel driver i2c-diolan-u2c + +Supported adapters: + * Diolan U2C-12 I2C-USB adapter + Documentation: + http://www.diolan.com/i2c/u2c12.html + +Author: Guenter Roeck + +Description +----------- + +This is the driver for the Diolan U2C-12 USB-I2C adapter. + +The Diolan U2C-12 I2C-USB Adapter provides a low cost solution to connect +a computer to I2C slave devices using a USB interface. It also supports +connectivity to SPI devices. + +This driver only supports the I2C interface of U2C-12. The driver does not use +interrupts. + + +Module parameters +----------------- + +* frequency: I2C bus frequency diff --git a/Documentation/i2c/busses/i2c-i801 b/Documentation/i2c/busses/i2c-i801 new file mode 100644 index 00000000..d55b8ab2 --- /dev/null +++ b/Documentation/i2c/busses/i2c-i801 @@ -0,0 +1,158 @@ +Kernel driver i2c-i801 + +Supported adapters: + * Intel 82801AA and 82801AB (ICH and ICH0 - part of the + '810' and '810E' chipsets) + * Intel 82801BA (ICH2 - part of the '815E' chipset) + * Intel 82801CA/CAM (ICH3) + * Intel 82801DB (ICH4) (HW PEC supported) + * Intel 82801EB/ER (ICH5) (HW PEC supported) + * Intel 6300ESB + * Intel 82801FB/FR/FW/FRW (ICH6) + * Intel 82801G (ICH7) + * Intel 631xESB/632xESB (ESB2) + * Intel 82801H (ICH8) + * Intel 82801I (ICH9) + * Intel EP80579 (Tolapai) + * Intel 82801JI (ICH10) + * Intel 5/3400 Series (PCH) + * Intel 6 Series (PCH) + * Intel Patsburg (PCH) + * Intel DH89xxCC (PCH) + * Intel Panther Point (PCH) + * Intel Lynx Point (PCH) + * Intel Lynx Point-LP (PCH) + * Intel Avoton (SOC) + * Intel Wellsburg (PCH) + Datasheets: Publicly available at the Intel website + +On Intel Patsburg and later chipsets, both the normal host SMBus controller +and the additional 'Integrated Device Function' controllers are supported. + +Authors: + Mark Studebaker + Jean Delvare + + +Module Parameters +----------------- + +* disable_features (bit vector) +Disable selected features normally supported by the device. This makes it +possible to work around possible driver or hardware bugs if the feature in +question doesn't work as intended for whatever reason. Bit values: + 0x01 disable SMBus PEC + 0x02 disable the block buffer + 0x08 disable the I2C block read functionality + 0x10 don't use interrupts + + +Description +----------- + +The ICH (properly known as the 82801AA), ICH0 (82801AB), ICH2 (82801BA), +ICH3 (82801CA/CAM) and later devices (PCH) are Intel chips that are a part of +Intel's '810' chipset for Celeron-based PCs, '810E' chipset for +Pentium-based PCs, '815E' chipset, and others. + +The ICH chips contain at least SEVEN separate PCI functions in TWO logical +PCI devices. An output of lspci will show something similar to the +following: + + 00:1e.0 PCI bridge: Intel Corporation: Unknown device 2418 (rev 01) + 00:1f.0 ISA bridge: Intel Corporation: Unknown device 2410 (rev 01) + 00:1f.1 IDE interface: Intel Corporation: Unknown device 2411 (rev 01) + 00:1f.2 USB Controller: Intel Corporation: Unknown device 2412 (rev 01) + 00:1f.3 Unknown class [0c05]: Intel Corporation: Unknown device 2413 (rev 01) + +The SMBus controller is function 3 in device 1f. Class 0c05 is SMBus Serial +Controller. + +The ICH chips are quite similar to Intel's PIIX4 chip, at least in the +SMBus controller. + + +Process Call Support +-------------------- + +Not supported. + + +I2C Block Read Support +---------------------- + +I2C block read is supported on the 82801EB (ICH5) and later chips. + + +SMBus 2.0 Support +----------------- + +The 82801DB (ICH4) and later chips support several SMBus 2.0 features. + + +Interrupt Support +----------------- + +PCI interrupt support is supported on the 82801EB (ICH5) and later chips. + + +Hidden ICH SMBus +---------------- + +If your system has an Intel ICH south bridge, but you do NOT see the +SMBus device at 00:1f.3 in lspci, and you can't figure out any way in the +BIOS to enable it, it means it has been hidden by the BIOS code. Asus is +well known for first doing this on their P4B motherboard, and many other +boards after that. Some vendor machines are affected as well. + +The first thing to try is the "i2c_ec" ACPI driver. It could be that the +SMBus was hidden on purpose because it'll be driven by ACPI. If the +i2c_ec driver works for you, just forget about the i2c-i801 driver and +don't try to unhide the ICH SMBus. Even if i2c_ec doesn't work, you +better make sure that the SMBus isn't used by the ACPI code. Try loading +the "fan" and "thermal" drivers, and check in /proc/acpi/fan and +/proc/acpi/thermal_zone. If you find anything there, it's likely that +the ACPI is accessing the SMBus and it's safer not to unhide it. Only +once you are certain that ACPI isn't using the SMBus, you can attempt +to unhide it. + +In order to unhide the SMBus, we need to change the value of a PCI +register before the kernel enumerates the PCI devices. This is done in +drivers/pci/quirks.c, where all affected boards must be listed (see +function asus_hides_smbus_hostbridge.) If the SMBus device is missing, +and you think there's something interesting on the SMBus (e.g. a +hardware monitoring chip), you need to add your board to the list. + +The motherboard is identified using the subvendor and subdevice IDs of the +host bridge PCI device. Get yours with "lspci -n -v -s 00:00.0": + +00:00.0 Class 0600: 8086:2570 (rev 02) + Subsystem: 1043:80f2 + Flags: bus master, fast devsel, latency 0 + Memory at fc000000 (32-bit, prefetchable) [size=32M] + Capabilities: [e4] #09 [2106] + Capabilities: [a0] AGP version 3.0 + +Here the host bridge ID is 2570 (82865G/PE/P), the subvendor ID is 1043 +(Asus) and the subdevice ID is 80f2 (P4P800-X). You can find the symbolic +names for the bridge ID and the subvendor ID in include/linux/pci_ids.h, +and then add a case for your subdevice ID at the right place in +drivers/pci/quirks.c. Then please give it very good testing, to make sure +that the unhidden SMBus doesn't conflict with e.g. ACPI. + +If it works, proves useful (i.e. there are usable chips on the SMBus) +and seems safe, please submit a patch for inclusion into the kernel. + +Note: There's a useful script in lm_sensors 2.10.2 and later, named +unhide_ICH_SMBus (in prog/hotplug), which uses the fakephp driver to +temporarily unhide the SMBus without having to patch and recompile your +kernel. It's very convenient if you just want to check if there's +anything interesting on your hidden ICH SMBus. + + +********************** +The lm_sensors project gratefully acknowledges the support of Texas +Instruments in the initial development of this driver. + +The lm_sensors project gratefully acknowledges the support of Intel in the +development of SMBus 2.0 / ICH4 features of this driver. diff --git a/Documentation/i2c/busses/i2c-ismt b/Documentation/i2c/busses/i2c-ismt new file mode 100644 index 00000000..73735582 --- /dev/null +++ b/Documentation/i2c/busses/i2c-ismt @@ -0,0 +1,36 @@ +Kernel driver i2c-ismt + +Supported adapters: + * Intel S12xx series SOCs + +Authors: + Bill Brown + + +Module Parameters +----------------- + +* bus_speed (unsigned int) +Allows changing of the bus speed. Normally, the bus speed is set by the BIOS +and never needs to be changed. However, some SMBus analyzers are too slow for +monitoring the bus during debug, thus the need for this module parameter. +Specify the bus speed in kHz. +Available bus frequency settings: + 0 no change + 80 kHz + 100 kHz + 400 kHz + 1000 kHz + + +Description +----------- + +The S12xx series of SOCs have a pair of integrated SMBus 2.0 controllers +targeted primarily at the microserver and storage markets. + +The S12xx series contain a pair of PCI functions. An output of lspci will show +something similar to the following: + + 00:13.0 System peripheral: Intel Corporation Centerton SMBus 2.0 Controller 0 + 00:13.1 System peripheral: Intel Corporation Centerton SMBus 2.0 Controller 1 diff --git a/Documentation/i2c/busses/i2c-nforce2 b/Documentation/i2c/busses/i2c-nforce2 new file mode 100644 index 00000000..9698c396 --- /dev/null +++ b/Documentation/i2c/busses/i2c-nforce2 @@ -0,0 +1,50 @@ +Kernel driver i2c-nforce2 + +Supported adapters: + * nForce2 MCP 10de:0064 + * nForce2 Ultra 400 MCP 10de:0084 + * nForce3 Pro150 MCP 10de:00D4 + * nForce3 250Gb MCP 10de:00E4 + * nForce4 MCP 10de:0052 + * nForce4 MCP-04 10de:0034 + * nForce MCP51 10de:0264 + * nForce MCP55 10de:0368 + * nForce MCP61 10de:03EB + * nForce MCP65 10de:0446 + * nForce MCP67 10de:0542 + * nForce MCP73 10de:07D8 + * nForce MCP78S 10de:0752 + * nForce MCP79 10de:0AA2 + +Datasheet: not publicly available, but seems to be similar to the + AMD-8111 SMBus 2.0 adapter. + +Authors: + Hans-Frieder Vogt , + Thomas Leibold , + Patrick Dreker + +Description +----------- + +i2c-nforce2 is a driver for the SMBuses included in the nVidia nForce2 MCP. + +If your 'lspci -v' listing shows something like the following, + +00:01.1 SMBus: nVidia Corporation: Unknown device 0064 (rev a2) + Subsystem: Asustek Computer, Inc.: Unknown device 0c11 + Flags: 66Mhz, fast devsel, IRQ 5 + I/O ports at c000 [size=32] + Capabilities: + +then this driver should support the SMBuses of your motherboard. + + +Notes +----- + +The SMBus adapter in the nForce2 chipset seems to be very similar to the +SMBus 2.0 adapter in the AMD-8111 south bridge. However, I could only get +the driver to work with direct I/O access, which is different to the EC +interface of the AMD-8111. Tested on Asus A7N8X. The ACPI DSDT table of the +Asus A7N8X lists two SMBuses, both of which are supported by this driver. diff --git a/Documentation/i2c/busses/i2c-ocores b/Documentation/i2c/busses/i2c-ocores new file mode 100644 index 00000000..c269aaa2 --- /dev/null +++ b/Documentation/i2c/busses/i2c-ocores @@ -0,0 +1,68 @@ +Kernel driver i2c-ocores + +Supported adapters: + * OpenCores.org I2C controller by Richard Herveille (see datasheet link) + Datasheet: http://www.opencores.org/projects.cgi/web/i2c/overview + +Author: Peter Korsgaard + +Description +----------- + +i2c-ocores is an i2c bus driver for the OpenCores.org I2C controller +IP core by Richard Herveille. + +Usage +----- + +i2c-ocores uses the platform bus, so you need to provide a struct +platform_device with the base address and interrupt number. The +dev.platform_data of the device should also point to a struct +ocores_i2c_platform_data (see linux/i2c-ocores.h) describing the +distance between registers and the input clock speed. +There is also a possibility to attach a list of i2c_board_info which +the i2c-ocores driver will add to the bus upon creation. + +E.G. something like: + +static struct resource ocores_resources[] = { + [0] = { + .start = MYI2C_BASEADDR, + .end = MYI2C_BASEADDR + 8, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = MYI2C_IRQ, + .end = MYI2C_IRQ, + .flags = IORESOURCE_IRQ, + }, +}; + +/* optional board info */ +struct i2c_board_info ocores_i2c_board_info[] = { + { + I2C_BOARD_INFO("tsc2003", 0x48), + .platform_data = &tsc2003_platform_data, + .irq = TSC_IRQ + }, + { + I2C_BOARD_INFO("adv7180", 0x42 >> 1), + .irq = ADV_IRQ + } +}; + +static struct ocores_i2c_platform_data myi2c_data = { + .regstep = 2, /* two bytes between registers */ + .clock_khz = 50000, /* input clock of 50MHz */ + .devices = ocores_i2c_board_info, /* optional table of devices */ + .num_devices = ARRAY_SIZE(ocores_i2c_board_info), /* table size */ +}; + +static struct platform_device myi2c = { + .name = "ocores-i2c", + .dev = { + .platform_data = &myi2c_data, + }, + .num_resources = ARRAY_SIZE(ocores_resources), + .resource = ocores_resources, +}; diff --git a/Documentation/i2c/busses/i2c-parport b/Documentation/i2c/busses/i2c-parport new file mode 100644 index 00000000..2461c7b5 --- /dev/null +++ b/Documentation/i2c/busses/i2c-parport @@ -0,0 +1,177 @@ +Kernel driver i2c-parport + +Author: Jean Delvare + +This is a unified driver for several i2c-over-parallel-port adapters, +such as the ones made by Philips, Velleman or ELV. This driver is +meant as a replacement for the older, individual drivers: + * i2c-philips-par + * i2c-elv + * i2c-velleman + * video/i2c-parport (NOT the same as this one, dedicated to home brew + teletext adapters) + +It currently supports the following devices: + * (type=0) Philips adapter + * (type=1) home brew teletext adapter + * (type=2) Velleman K8000 adapter + * (type=3) ELV adapter + * (type=4) Analog Devices ADM1032 evaluation board + * (type=5) Analog Devices evaluation boards: ADM1025, ADM1030, ADM1031 + * (type=6) Barco LPT->DVI (K5800236) adapter + * (type=7) One For All JP1 parallel port adapter + +These devices use different pinout configurations, so you have to tell +the driver what you have, using the type module parameter. There is no +way to autodetect the devices. Support for different pinout configurations +can be easily added when needed. + +Earlier kernels defaulted to type=0 (Philips). But now, if the type +parameter is missing, the driver will simply fail to initialize. + +SMBus alert support is available on adapters which have this line properly +connected to the parallel port's interrupt pin. + + +Building your own adapter +------------------------- + +If you want to build you own i2c-over-parallel-port adapter, here is +a sample electronics schema (credits go to Sylvain Munaut): + +Device PC +Side ___________________Vdd (+) Side + | | | + --- --- --- + | | | | | | + |R| |R| |R| + | | | | | | + --- --- --- + | | | + | | /| | +SCL ----------x--------o |-----------x------------------- pin 2 + | \| | | + | | | + | |\ | | +SDA ----------x----x---| o---x--------------------------- pin 13 + | |/ | + | | + | /| | + ---------o |----------------x-------------- pin 3 + \| | | + | | + --- --- + | | | | + |R| |R| + | | | | + --- --- + | | + ### ### + GND GND + +Remarks: + - This is the exact pinout and electronics used on the Analog Devices + evaluation boards. + /| + - All inverters -o |- must be 74HC05, they must be open collector output. + \| + - All resitors are 10k. + - Pins 18-25 of the parallel port connected to GND. + - Pins 4-9 (D2-D7) could be used as VDD is the driver drives them high. + The ADM1032 evaluation board uses D4-D7. Beware that the amount of + current you can draw from the parallel port is limited. Also note that + all connected lines MUST BE driven at the same state, else you'll short + circuit the output buffers! So plugging the I2C adapter after loading + the i2c-parport module might be a good safety since data line state + prior to init may be unknown. + - This is 5V! + - Obviously you cannot read SCL (so it's not really standard-compliant). + Pretty easy to add, just copy the SDA part and use another input pin. + That would give (ELV compatible pinout): + + +Device PC +Side ______________________________Vdd (+) Side + | | | | + --- --- --- --- + | | | | | | | | + |R| |R| |R| |R| + | | | | | | | | + --- --- --- --- + | | | | + | | |\ | | +SCL ----------x--------x--| o---x------------------------ pin 15 + | | |/ | + | | | + | | /| | + | ---o |-------------x-------------- pin 2 + | \| | | + | | | + | | | + | |\ | | +SDA ---------------x---x--| o--------x------------------- pin 10 + | |/ | + | | + | /| | + ---o |------------------x--------- pin 3 + \| | | + | | + --- --- + | | | | + |R| |R| + | | | | + --- --- + | | + ### ### + GND GND + + +If possible, you should use the same pinout configuration as existing +adapters do, so you won't even have to change the code. + + +Similar (but different) drivers +------------------------------- + +This driver is NOT the same as the i2c-pport driver found in the i2c +package. The i2c-pport driver makes use of modern parallel port features so +that you don't need additional electronics. It has other restrictions +however, and was not ported to Linux 2.6 (yet). + +This driver is also NOT the same as the i2c-pcf-epp driver found in the +lm_sensors package. The i2c-pcf-epp driver doesn't use the parallel port as +an I2C bus directly. Instead, it uses it to control an external I2C bus +master. That driver was not ported to Linux 2.6 (yet) either. + + +Legacy documentation for Velleman adapter +----------------------------------------- + +Useful links: +Velleman http://www.velleman.be/ +Velleman K8000 Howto http://howto.htlw16.ac.at/k8000-howto.html + +The project has lead to new libs for the Velleman K8000 and K8005: + LIBK8000 v1.99.1 and LIBK8005 v0.21 +With these libs, you can control the K8000 interface card and the K8005 +stepper motor card with the simple commands which are in the original +Velleman software, like SetIOchannel, ReadADchannel, SendStepCCWFull and +many more, using /dev/velleman. + http://home.wanadoo.nl/hihihi/libk8000.htm + http://home.wanadoo.nl/hihihi/libk8005.htm + http://struyve.mine.nu:8080/index.php?block=k8000 + http://sourceforge.net/projects/libk8005/ + + +One For All JP1 parallel port adapter +------------------------------------- + +The JP1 project revolves around a set of remote controls which expose +the I2C bus their internal configuration EEPROM lives on via a 6 pin +jumper in the battery compartment. More details can be found at: + +http://www.hifi-remote.com/jp1/ + +Details of the simple parallel port hardware can be found at: + +http://www.hifi-remote.com/jp1/hardware.shtml diff --git a/Documentation/i2c/busses/i2c-parport-light b/Documentation/i2c/busses/i2c-parport-light new file mode 100644 index 00000000..c22ee063 --- /dev/null +++ b/Documentation/i2c/busses/i2c-parport-light @@ -0,0 +1,22 @@ +Kernel driver i2c-parport-light + +Author: Jean Delvare + +This driver is a light version of i2c-parport. It doesn't depend +on the parport driver, and uses direct I/O access instead. This might be +preferred on embedded systems where wasting memory for the clean but heavy +parport handling is not an option. The drawback is a reduced portability +and the impossibility to daisy-chain other parallel port devices. + +Please see i2c-parport for documentation. + +Module parameters: + +* type: type of adapter (see i2c-parport or modinfo) + +* base: base I/O address + Default is 0x378 which is fairly common for parallel ports, at least on PC. + +* irq: optional IRQ + This must be passed if you want SMBus alert support, assuming your adapter + actually supports this. diff --git a/Documentation/i2c/busses/i2c-pca-isa b/Documentation/i2c/busses/i2c-pca-isa new file mode 100644 index 00000000..b044e526 --- /dev/null +++ b/Documentation/i2c/busses/i2c-pca-isa @@ -0,0 +1,23 @@ +Kernel driver i2c-pca-isa + +Supported adapters: +This driver supports ISA boards using the Philips PCA 9564 +Parallel bus to I2C bus controller + +Author: Ian Campbell , Arcom Control Systems + +Module Parameters +----------------- + +* base int + I/O base address +* irq int + IRQ interrupt +* clock int + Clock rate as described in table 1 of PCA9564 datasheet + +Description +----------- + +This driver supports ISA boards using the Philips PCA 9564 +Parallel bus to I2C bus controller diff --git a/Documentation/i2c/busses/i2c-piix4 b/Documentation/i2c/busses/i2c-piix4 new file mode 100644 index 00000000..1e6634f5 --- /dev/null +++ b/Documentation/i2c/busses/i2c-piix4 @@ -0,0 +1,109 @@ +Kernel driver i2c-piix4 + +Supported adapters: + * Intel 82371AB PIIX4 and PIIX4E + * Intel 82443MX (440MX) + Datasheet: Publicly available at the Intel website + * ServerWorks OSB4, CSB5, CSB6, HT-1000 and HT-1100 southbridges + Datasheet: Only available via NDA from ServerWorks + * ATI IXP200, IXP300, IXP400, SB600, SB700 and SB800 southbridges + Datasheet: Not publicly available + SB700 register reference available at: + http://support.amd.com/us/Embedded_TechDocs/43009_sb7xx_rrg_pub_1.00.pdf + * AMD SP5100 (SB700 derivative found on some server mainboards) + Datasheet: Publicly available at the AMD website + http://support.amd.com/us/Embedded_TechDocs/44413.pdf + * AMD Hudson-2 + Datasheet: Not publicly available + * Standard Microsystems (SMSC) SLC90E66 (Victory66) southbridge + Datasheet: Publicly available at the SMSC website http://www.smsc.com + +Authors: + Frodo Looijaard + Philip Edelbrock + + +Module Parameters +----------------- + +* force: int + Forcibly enable the PIIX4. DANGEROUS! +* force_addr: int + Forcibly enable the PIIX4 at the given address. EXTREMELY DANGEROUS! + + +Description +----------- + +The PIIX4 (properly known as the 82371AB) is an Intel chip with a lot of +functionality. Among other things, it implements the PCI bus. One of its +minor functions is implementing a System Management Bus. This is a true +SMBus - you can not access it on I2C levels. The good news is that it +natively understands SMBus commands and you do not have to worry about +timing problems. The bad news is that non-SMBus devices connected to it can +confuse it mightily. Yes, this is known to happen... + +Do 'lspci -v' and see whether it contains an entry like this: + +0000:00:02.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 02) + Flags: medium devsel, IRQ 9 + +Bus and device numbers may differ, but the function number must be +identical (like many PCI devices, the PIIX4 incorporates a number of +different 'functions', which can be considered as separate devices). If you +find such an entry, you have a PIIX4 SMBus controller. + +On some computers (most notably, some Dells), the SMBus is disabled by +default. If you use the insmod parameter 'force=1', the kernel module will +try to enable it. THIS IS VERY DANGEROUS! If the BIOS did not set up a +correct address for this module, you could get in big trouble (read: +crashes, data corruption, etc.). Try this only as a last resort (try BIOS +updates first, for example), and backup first! An even more dangerous +option is 'force_addr='. This will not only enable the PIIX4 like +'force' foes, but it will also set a new base I/O port address. The SMBus +parts of the PIIX4 needs a range of 8 of these addresses to function +correctly. If these addresses are already reserved by some other device, +you will get into big trouble! DON'T USE THIS IF YOU ARE NOT VERY SURE +ABOUT WHAT YOU ARE DOING! + +The PIIX4E is just an new version of the PIIX4; it is supported as well. +The PIIX/PIIX3 does not implement an SMBus or I2C bus, so you can't use +this driver on those mainboards. + +The ServerWorks Southbridges, the Intel 440MX, and the Victory66 are +identical to the PIIX4 in I2C/SMBus support. + +The AMD SB700 and SP5100 chipsets implement two PIIX4-compatible SMBus +controllers. If your BIOS initializes the secondary controller, it will +be detected by this driver as an "Auxiliary SMBus Host Controller". + +If you own Force CPCI735 motherboard or other OSB4 based systems you may need +to change the SMBus Interrupt Select register so the SMBus controller uses +the SMI mode. + +1) Use lspci command and locate the PCI device with the SMBus controller: + 00:0f.0 ISA bridge: ServerWorks OSB4 South Bridge (rev 4f) + The line may vary for different chipsets. Please consult the driver source + for all possible PCI ids (and lspci -n to match them). Lets assume the + device is located at 00:0f.0. +2) Now you just need to change the value in 0xD2 register. Get it first with + command: lspci -xxx -s 00:0f.0 + If the value is 0x3 then you need to change it to 0x1 + setpci -s 00:0f.0 d2.b=1 + +Please note that you don't need to do that in all cases, just when the SMBus is +not working properly. + + +Hardware-specific issues +------------------------ + +This driver will refuse to load on IBM systems with an Intel PIIX4 SMBus. +Some of these machines have an RFID EEPROM (24RF08) connected to the SMBus, +which can easily get corrupted due to a state machine bug. These are mostly +Thinkpad laptops, but desktop systems may also be affected. We have no list +of all affected systems, so the only safe solution was to prevent access to +the SMBus on all IBM systems (detected using DMI data.) + +For additional information, read: +http://www.lm-sensors.org/browser/lm-sensors/trunk/README diff --git a/Documentation/i2c/busses/i2c-sis5595 b/Documentation/i2c/busses/i2c-sis5595 new file mode 100644 index 00000000..ecd21fb4 --- /dev/null +++ b/Documentation/i2c/busses/i2c-sis5595 @@ -0,0 +1,59 @@ +Kernel driver i2c-sis5595 + +Authors: + Frodo Looijaard , + Mark D. Studebaker , + Philip Edelbrock + +Supported adapters: + * Silicon Integrated Systems Corp. SiS5595 Southbridge + Datasheet: Publicly available at the Silicon Integrated Systems Corp. site. + +Note: all have mfr. ID 0x1039. + + SUPPORTED PCI ID + 5595 0008 + + Note: these chips contain a 0008 device which is incompatible with the + 5595. We recognize these by the presence of the listed + "blacklist" PCI ID and refuse to load. + + NOT SUPPORTED PCI ID BLACKLIST PCI ID + 540 0008 0540 + 550 0008 0550 + 5513 0008 5511 + 5581 0008 5597 + 5582 0008 5597 + 5597 0008 5597 + 5598 0008 5597/5598 + 630 0008 0630 + 645 0008 0645 + 646 0008 0646 + 648 0008 0648 + 650 0008 0650 + 651 0008 0651 + 730 0008 0730 + 735 0008 0735 + 745 0008 0745 + 746 0008 0746 + +Module Parameters +----------------- + +* force_addr=0xaddr Set the I/O base address. Useful for boards + that don't set the address in the BIOS. Does not do a + PCI force; the device must still be present in lspci. + Don't use this unless the driver complains that the + base address is not set. + +Description +----------- + +i2c-sis5595 is a true SMBus host driver for motherboards with the SiS5595 +southbridges. + +WARNING: If you are trying to access the integrated sensors on the SiS5595 +chip, you want the sis5595 driver for those, not this driver. This driver +is a BUS driver, not a CHIP driver. A BUS driver is used by other CHIP +drivers to access chips on the bus. + diff --git a/Documentation/i2c/busses/i2c-sis630 b/Documentation/i2c/busses/i2c-sis630 new file mode 100644 index 00000000..ee794363 --- /dev/null +++ b/Documentation/i2c/busses/i2c-sis630 @@ -0,0 +1,58 @@ +Kernel driver i2c-sis630 + +Supported adapters: + * Silicon Integrated Systems Corp (SiS) + 630 chipset (Datasheet: available at http://www.sfr-fresh.com/linux) + 730 chipset + 964 chipset + * Possible other SiS chipsets ? + +Author: Alexander Malysh + Amaury Decrême - SiS964 support + +Module Parameters +----------------- + +* force = [1|0] Forcibly enable the SIS630. DANGEROUS! + This can be interesting for chipsets not named + above to check if it works for you chipset, but DANGEROUS! + +* high_clock = [1|0] Forcibly set Host Master Clock to 56KHz (default, + what your BIOS use). DANGEROUS! This should be a bit + faster, but freeze some systems (i.e. my Laptop). + SIS630/730 chip only. + + +Description +----------- + +This SMBus only driver is known to work on motherboards with the above +named chipsets. + +If you see something like this: + +00:00.0 Host bridge: Silicon Integrated Systems [SiS] 630 Host (rev 31) +00:01.0 ISA bridge: Silicon Integrated Systems [SiS] 85C503/5513 + +or like this: + +00:00.0 Host bridge: Silicon Integrated Systems [SiS] 730 Host (rev 02) +00:01.0 ISA bridge: Silicon Integrated Systems [SiS] 85C503/5513 + +or like this: + +00:00.0 Host bridge: Silicon Integrated Systems [SiS] 760/M760 Host (rev 02) +00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS964 [MuTIOL Media IO] + LPC Controller (rev 36) + +in your 'lspci' output , then this driver is for your chipset. + +Thank You +--------- +Philip Edelbrock +- testing SiS730 support +Mark M. Hoffman +- bug fixes + +To anyone else which I forgot here ;), thanks! + diff --git a/Documentation/i2c/busses/i2c-sis96x b/Documentation/i2c/busses/i2c-sis96x new file mode 100644 index 00000000..0b979f32 --- /dev/null +++ b/Documentation/i2c/busses/i2c-sis96x @@ -0,0 +1,73 @@ +Kernel driver i2c-sis96x + +Replaces 2.4.x i2c-sis645 + +Supported adapters: + * Silicon Integrated Systems Corp (SiS) + Any combination of these host bridges: + 645, 645DX (aka 646), 648, 650, 651, 655, 735, 745, 746 + and these south bridges: + 961, 962, 963(L) + +Author: Mark M. Hoffman + +Description +----------- + +This SMBus only driver is known to work on motherboards with the above +named chipset combinations. The driver was developed without benefit of a +proper datasheet from SiS. The SMBus registers are assumed compatible with +those of the SiS630, although they are located in a completely different +place. Thanks to Alexander Malysh for providing the +SiS630 datasheet (and driver). + +The command "lspci" as root should produce something like these lines: + +00:00.0 Host bridge: Silicon Integrated Systems [SiS]: Unknown device 0645 +00:02.0 ISA bridge: Silicon Integrated Systems [SiS] 85C503/5513 +00:02.1 SMBus: Silicon Integrated Systems [SiS]: Unknown device 0016 + +or perhaps this... + +00:00.0 Host bridge: Silicon Integrated Systems [SiS]: Unknown device 0645 +00:02.0 ISA bridge: Silicon Integrated Systems [SiS]: Unknown device 0961 +00:02.1 SMBus: Silicon Integrated Systems [SiS]: Unknown device 0016 + +(kernel versions later than 2.4.18 may fill in the "Unknown"s) + +If you can't see it please look on quirk_sis_96x_smbus +(drivers/pci/quirks.c) (also if southbridge detection fails) + +I suspect that this driver could be made to work for the following SiS +chipsets as well: 635, and 635T. If anyone owns a board with those chips +AND is willing to risk crashing & burning an otherwise well-behaved kernel +in the name of progress... please contact me at or +via the linux-i2c mailing list: . Please send bug +reports and/or success stories as well. + + +TO DOs +------ + +* The driver does not support SMBus block reads/writes; I may add them if a +scenario is found where they're needed. + + +Thank You +--------- + +Mark D. Studebaker + - design hints and bug fixes +Alexander Maylsh + - ditto, plus an important datasheet... almost the one I really wanted +Hans-Günter Lütke Uphues + - patch for SiS735 +Robert Zwerus + - testing for SiS645DX +Kianusch Sayah Karadji + - patch for SiS645DX/962 +Ken Healy + - patch for SiS655 + +To anyone else who has written w/ feedback, thanks! + diff --git a/Documentation/i2c/busses/i2c-taos-evm b/Documentation/i2c/busses/i2c-taos-evm new file mode 100644 index 00000000..63f62bcb --- /dev/null +++ b/Documentation/i2c/busses/i2c-taos-evm @@ -0,0 +1,46 @@ +Kernel driver i2c-taos-evm + +Author: Jean Delvare + +This is a driver for the evaluation modules for TAOS I2C/SMBus chips. +The modules include an SMBus master with limited capabilities, which can +be controlled over the serial port. Virtually all evaluation modules +are supported, but a few lines of code need to be added for each new +module to instantiate the right I2C chip on the bus. Obviously, a driver +for the chip in question is also needed. + +Currently supported devices are: + +* TAOS TSL2550 EVM + +For additional information on TAOS products, please see + http://www.taosinc.com/ + + +Using this driver +----------------- + +In order to use this driver, you'll need the serport driver, and the +inputattach tool, which is part of the input-utils package. The following +commands will tell the kernel that you have a TAOS EVM on the first +serial port: + +# modprobe serport +# inputattach --taos-evm /dev/ttyS0 + + +Technical details +----------------- + +Only 4 SMBus transaction types are supported by the TAOS evaluation +modules: +* Receive Byte +* Send Byte +* Read Byte +* Write Byte + +The communication protocol is text-based and pretty simple. It is +described in a PDF document on the CD which comes with the evaluation +module. The communication is rather slow, because the serial port has +to operate at 1200 bps. However, I don't think this is a big concern in +practice, as these modules are meant for evaluation and testing only. diff --git a/Documentation/i2c/busses/i2c-via b/Documentation/i2c/busses/i2c-via new file mode 100644 index 00000000..34387066 --- /dev/null +++ b/Documentation/i2c/busses/i2c-via @@ -0,0 +1,34 @@ +Kernel driver i2c-via + +Supported adapters: + * VIA Technologies, InC. VT82C586B + Datasheet: Publicly available at the VIA website + +Author: Kyösti Mälkki + +Description +----------- + +i2c-via is an i2c bus driver for motherboards with VIA chipset. + +The following VIA pci chipsets are supported: + - MVP3, VP3, VP2/97, VPX/97 + - others with South bridge VT82C586B + +Your lspci listing must show this : + + Bridge: VIA Technologies, Inc. VT82C586B ACPI (rev 10) + + Problems? + + Q: You have VT82C586B on the motherboard, but not in the listing. + + A: Go to your BIOS setup, section PCI devices or similar. + Turn USB support on, and try again. + + Q: No error messages, but still i2c doesn't seem to work. + + A: This can happen. This driver uses the pins VIA recommends in their + datasheets, but there are several ways the motherboard manufacturer + can actually wire the lines. + diff --git a/Documentation/i2c/busses/i2c-viapro b/Documentation/i2c/busses/i2c-viapro new file mode 100644 index 00000000..b88f91ae --- /dev/null +++ b/Documentation/i2c/busses/i2c-viapro @@ -0,0 +1,73 @@ +Kernel driver i2c-viapro + +Supported adapters: + * VIA Technologies, Inc. VT82C596A/B + Datasheet: Sometimes available at the VIA website + + * VIA Technologies, Inc. VT82C686A/B + Datasheet: Sometimes available at the VIA website + + * VIA Technologies, Inc. VT8231, VT8233, VT8233A + Datasheet: available on request from VIA + + * VIA Technologies, Inc. VT8235, VT8237R, VT8237A, VT8237S, VT8251 + Datasheet: available on request and under NDA from VIA + + * VIA Technologies, Inc. CX700 + Datasheet: available on request and under NDA from VIA + + * VIA Technologies, Inc. VX800/VX820 + Datasheet: available on http://linux.via.com.tw + + * VIA Technologies, Inc. VX855/VX875 + Datasheet: available on http://linux.via.com.tw + + * VIA Technologies, Inc. VX900 + Datasheet: available on http://linux.via.com.tw + +Authors: + Kyösti Mälkki , + Mark D. Studebaker , + Jean Delvare + +Module Parameters +----------------- + +* force: int + Forcibly enable the SMBus controller. DANGEROUS! +* force_addr: int + Forcibly enable the SMBus at the given address. EXTREMELY DANGEROUS! + +Description +----------- + +i2c-viapro is a true SMBus host driver for motherboards with one of the +supported VIA south bridges. + +Your lspci -n listing must show one of these : + + device 1106:3050 (VT82C596A function 3) + device 1106:3051 (VT82C596B function 3) + device 1106:3057 (VT82C686 function 4) + device 1106:3074 (VT8233) + device 1106:3147 (VT8233A) + device 1106:8235 (VT8231 function 4) + device 1106:3177 (VT8235) + device 1106:3227 (VT8237R) + device 1106:3337 (VT8237A) + device 1106:3372 (VT8237S) + device 1106:3287 (VT8251) + device 1106:8324 (CX700) + device 1106:8353 (VX800/VX820) + device 1106:8409 (VX855/VX875) + device 1106:8410 (VX900) + +If none of these show up, you should look in the BIOS for settings like +enable ACPI / SMBus or even USB. + +Except for the oldest chips (VT82C596A/B, VT82C686A and most probably +VT8231), this driver supports I2C block transactions. Such transactions +are mainly useful to read from and write to EEPROMs. + +The CX700/VX800/VX820 additionally appears to support SMBus PEC, although +this driver doesn't implement it yet. diff --git a/Documentation/i2c/busses/scx200_acb b/Documentation/i2c/busses/scx200_acb new file mode 100644 index 00000000..ce83c871 --- /dev/null +++ b/Documentation/i2c/busses/scx200_acb @@ -0,0 +1,32 @@ +Kernel driver scx200_acb + +Author: Christer Weinigel + +The driver supersedes the older, never merged driver named i2c-nscacb. + +Module Parameters +----------------- + +* base: up to 4 ints + Base addresses for the ACCESS.bus controllers on SCx200 and SC1100 devices + + By default the driver uses two base addresses 0x820 and 0x840. + If you want only one base address, specify the second as 0 so as to + override this default. + +Description +----------- + +Enable the use of the ACCESS.bus controller on the Geode SCx200 and +SC1100 processors and the CS5535 and CS5536 Geode companion devices. + +Device-specific notes +--------------------- + +The SC1100 WRAP boards are known to use base addresses 0x810 and 0x820. +If the scx200_acb driver is built into the kernel, add the following +parameter to your boot command line: + scx200_acb.base=0x810,0x820 +If the scx200_acb driver is built as a module, add the following line to +a configuration file in /etc/modprobe.d/ instead: + options scx200_acb base=0x810,0x820 -- cgit v1.2.3