aboutsummaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings/regulator/tps65090.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/regulator/tps65090.txt')
-rw-r--r--Documentation/devicetree/bindings/regulator/tps65090.txt122
1 files changed, 122 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/regulator/tps65090.txt b/Documentation/devicetree/bindings/regulator/tps65090.txt
new file mode 100644
index 00000000..313a60ba
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/tps65090.txt
@@ -0,0 +1,122 @@
+TPS65090 regulators
+
+Required properties:
+- compatible: "ti,tps65090"
+- reg: I2C slave address
+- interrupts: the interrupt outputs of the controller
+- regulators: A node that houses a sub-node for each regulator within the
+ device. Each sub-node is identified using the node's name, with valid
+ values listed below. The content of each sub-node is defined by the
+ standard binding for regulators; see regulator.txt.
+ dcdc[1-3], fet[1-7] and ldo[1-2] respectively.
+- vsys[1-3]-supply: The input supply for DCDC[1-3] respectively.
+- infet[1-7]-supply: The input supply for FET[1-7] respectively.
+- vsys-l[1-2]-supply: The input supply for LDO[1-2] respectively.
+
+Optional properties:
+- ti,enable-ext-control: This is applicable for DCDC1, DCDC2 and DCDC3.
+ If DCDCs are externally controlled then this property should be there.
+- "dcdc-ext-control-gpios: This is applicable for DCDC1, DCDC2 and DCDC3.
+ If DCDCs are externally controlled and if it is from GPIO then GPIO
+ number should be provided. If it is externally controlled and no GPIO
+ entry then driver will just configure this rails as external control
+ and will not provide any enable/disable APIs.
+
+Each regulator is defined using the standard binding for regulators.
+
+Example:
+
+ tps65090@48 {
+ compatible = "ti,tps65090";
+ reg = <0x48>;
+ interrupts = <0 88 0x4>;
+
+ vsys1-supply = <&some_reg>;
+ vsys2-supply = <&some_reg>;
+ vsys3-supply = <&some_reg>;
+ infet1-supply = <&some_reg>;
+ infet2-supply = <&some_reg>;
+ infet3-supply = <&some_reg>;
+ infet4-supply = <&some_reg>;
+ infet5-supply = <&some_reg>;
+ infet6-supply = <&some_reg>;
+ infet7-supply = <&some_reg>;
+ vsys_l1-supply = <&some_reg>;
+ vsys_l2-supply = <&some_reg>;
+
+ regulators {
+ dcdc1 {
+ regulator-name = "dcdc1";
+ regulator-boot-on;
+ regulator-always-on;
+ ti,enable-ext-control;
+ dcdc-ext-control-gpios = <&gpio 10 0>;
+ };
+
+ dcdc2 {
+ regulator-name = "dcdc2";
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ dcdc3 {
+ regulator-name = "dcdc3";
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ fet1 {
+ regulator-name = "fet1";
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ fet2 {
+ regulator-name = "fet2";
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ fet3 {
+ regulator-name = "fet3";
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ fet4 {
+ regulator-name = "fet4";
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ fet5 {
+ regulator-name = "fet5";
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ fet6 {
+ regulator-name = "fet6";
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ fet7 {
+ regulator-name = "fet7";
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo1 {
+ regulator-name = "ldo1";
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo2 {
+ regulator-name = "ldo2";
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ };
+ };