1 files changed, 55 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-cpu0.txt b/Documentation/devicetree/bindings/cpufreq/cpufreq-cpu0.txt
new file mode 100644
index 00000000..4416ccc3
--- /dev/null
+++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-cpu0.txt
@@ -0,0 +1,55 @@
+Generic CPU0 cpufreq driver
+
+It is a generic cpufreq driver for CPU0 frequency management.  It
+supports both uniprocessor (UP) and symmetric multiprocessor (SMP)
+systems which share clock and voltage across all CPUs.
+
+Both required and optional properties listed below must be defined
+under node /cpus/cpu@0.
+
+Required properties:
+- operating-points: Refer to Documentation/devicetree/bindings/power/opp.txt
+  for details
+
+Optional properties:
+- clock-latency: Specify the possible maximum transition latency for clock,
+  in unit of nanoseconds.
+- voltage-tolerance: Specify the CPU voltage tolerance in percentage.
+
+Examples:
+
+cpus {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	cpu@0 {
+		compatible = "arm,cortex-a9";
+		reg = <0>;
+		next-level-cache = <&L2>;
+		operating-points = <
+			/* kHz    uV */
+			792000  1100000
+			396000  950000
+			198000  850000
+		>;
+		transition-latency = <61036>; /* two CLK32 periods */
+	};
+
+	cpu@1 {
+		compatible = "arm,cortex-a9";
+		reg = <1>;
+		next-level-cache = <&L2>;
+	};
+
+	cpu@2 {
+		compatible = "arm,cortex-a9";
+		reg = <2>;
+		next-level-cache = <&L2>;
+	};
+
+	cpu@3 {
+		compatible = "arm,cortex-a9";
+		reg = <3>;
+		next-level-cache = <&L2>;
+	};
+};