|author||Fathi Boudra <firstname.lastname@example.org>||2013-04-28 09:33:08 +0300|
|committer||Fathi Boudra <email@example.com>||2013-04-28 09:33:08 +0300|
Diffstat (limited to 'Documentation/arm/SA1100/ADSBitsy')
1 files changed, 43 insertions, 0 deletions
diff --git a/Documentation/arm/SA1100/ADSBitsy b/Documentation/arm/SA1100/ADSBitsy
new file mode 100644
@@ -0,0 +1,43 @@
+ADS Bitsy Single Board Computer
+(It is different from Bitsy(iPAQ) of Compaq)
+For more details, contact Applied Data Systems or see
+The Linux support for this product has been provided by
+Woojung Huh <firstname.lastname@example.org>
+Use 'make adsbitsy_config' before any 'make config'.
+This will set up defaults for ADS Bitsy support.
+The kernel zImage is linked to be loaded and executed at 0xc0400000.
+Linux can be used with the ADS BootLoader that ships with the
+newer rev boards. See their documentation on how to load Linux.
+- SA1100 LCD frame buffer (8/16bpp...sort of)
+- SA1111 USB Master
+- SA1100 serial port
+- pcmcia, compact flash
+- console on LCD screen
+- serial ports (ttyS[0-2])
+ - ttyS0 is default for serial console
+- everything else! :-)
+- The flash on board is divided into 3 partitions.
+ You should be careful to use flash on board.
+ Its partition is different from GraphicsClient Plus and GraphicsMaster
+- 16bpp mode requires a different cable than what ships with the board.
+ Contact ADS or look through the manual to wire your own. Currently,
+ if you compile with 16bit mode support and switch into a lower bpp
+ mode, the timing is off so the image is corrupted. This will be
+ fixed soon.
+Any contribution can be sent to email@example.com and will be greatly welcome!