aboutsummaryrefslogtreecommitdiff
path: root/docs/specs/tpm.txt
blob: d1d71571e982ddd921766270a5fe3501967e7e23 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
QEMU TPM Device
===============

= Guest-side Hardware Interface =

The QEMU TPM emulation implements a TPM TIS hardware interface following the
Trusted Computing Group's specification "TCG PC Client Specific TPM Interface
Specification (TIS)", Specification Version 1.3, 21 March 2013. This
specification, or a later version of it, can be accessed from the following
URL:

https://trustedcomputinggroup.org/pc-client-work-group-pc-client-specific-tpm-interface-specification-tis/

The TIS interface makes a memory mapped IO region in the area 0xfed40000 -
0xfed44fff available to the guest operating system.


QEMU files related to TPM TIS interface:
 - hw/tpm/tpm_tis.c
 - hw/tpm/tpm_tis.h


= ACPI Interface =

The TPM device is defined with ACPI ID "PNP0C31". QEMU builds a SSDT and passes
it into the guest through the fw_cfg device. The device description contains
the base address of the TIS interface 0xfed40000 and the size of the MMIO area
(0x5000). In case a TPM2 is used by QEMU, a TPM2 ACPI table is also provided.
The device is described to be used in polling mode rather than interrupt mode
primarily because no unused IRQ could be found.

To support measurement logs to be written by the firmware, e.g. SeaBIOS, a TCPA
table is implemented. This table provides a 64kb buffer where the firmware can
write its log into. For TPM 2 only a more recent version of the TPM2 table
provides support for measurements logs and a TCPA table does not need to be
created.

The TCPA and TPM2 ACPI tables follow the Trusted Computing Group specification
"TCG ACPI Specification" Family "1.2" and "2.0", Level 00 Revision 00.37. This
specification, or a later version of it, can be accessed from the following
URL:

https://trustedcomputinggroup.org/tcg-acpi-specification/


QEMU files related to TPM ACPI tables:
 - hw/i386/acpi-build.c
 - include/hw/acpi/tpm.h


= TPM backend devices =

The TPM implementation is split into two parts, frontend and backend. The
frontend part is the hardware interface, such as the TPM TIS interface
described earlier, and the other part is the TPM backend interface. The backend
interfaces implement the interaction with a TPM device, which may be a physical
or an emulated device. The split between the front- and backend devices allows
a frontend to be connected with any available backend. This enables the TIS
interface to be used with the passthrough backend or the (future) swtpm backend.


QEMU files related to TPM backends:
 - backends/tpm.c
 - include/sysemu/tpm_backend.h
 - include/sysemu/tpm_backend_int.h


== The QEMU TPM passthrough device ==

In case QEMU is run on Linux as the host operating system it is possible to
make the hardware TPM device available to a single QEMU guest. In this case the
user must make sure that no other program is using the device, e.g., /dev/tpm0,
before trying to start QEMU with it.

The passthrough driver uses the host's TPM device for sending TPM commands
and receiving responses from. Besides that it accesses the TPM device's sysfs
entry for support of command cancellation. Since none of the state of a
hardware TPM can be migrated between hosts, virtual machine migration is
disabled when the TPM passthrough driver is used.

Since the host's TPM device will already be initialized by the host's firmware,
certain commands, e.g. TPM_Startup(), sent by the virtual firmware for device
initialization, will fail. In this case the firmware should not use the TPM.

Sharing the device with the host is generally not a recommended usage scenario
for a TPM device. The primary reason for this is that two operating systems can
then access the device's single set of resources, such as platform configuration
registers (PCRs). Applications or kernel security subsystems, such as the
Linux Integrity Measurement Architecture (IMA), are not expecting to share PCRs.


QEMU files related to the TPM passthrough device:
 - hw/tpm/tpm_passthrough.c
 - hw/tpm/tpm_util.c
 - hw/tpm/tpm_util.h


Command line to start QEMU with the TPM passthrough device using the host's
hardware TPM /dev/tpm0:

qemu-system-x86_64 -display sdl -enable-kvm \
  -m 1024 -boot d -bios bios-256k.bin -boot menu=on \
  -tpmdev passthrough,id=tpm0,path=/dev/tpm0 \
  -device tpm-tis,tpmdev=tpm0 test.img

The following commands should result in similar output inside the VM with a
Linux kernel that either has the TPM TIS driver built-in or available as a
module:

#> dmesg | grep -i tpm
[    0.711310] tpm_tis 00:06: 1.2 TPM (device=id 0x1, rev-id 1)

#> dmesg | grep TCPA
[    0.000000] ACPI: TCPA 0x0000000003FFD191C 000032 (v02 BOCHS  \
    BXPCTCPA 0000001 BXPC 00000001)

#> ls -l /dev/tpm*
crw-------. 1 root root 10, 224 Jul 11 10:11 /dev/tpm0

#> find /sys/devices/ | grep pcrs$ | xargs cat
PCR-00: 35 4E 3B CE 23 9F 38 59 ...
...
PCR-23: 00 00 00 00 00 00 00 00 ...


== The QEMU TPM emulator device ==

The TPM emulator device uses an external TPM emulator called 'swtpm' for
sending TPM commands to and receiving responses from. The swtpm program
must have been started before trying to access it through the TPM emulator
with QEMU.

The TPM emulator implements a command channel for transferring TPM commands
and responses as well as a control channel over which control commands can
be sent. The specification for the control channel can be found here:

https://github.com/stefanberger/swtpm/blob/master/man/man3/swtpm_ioctls.pod


The control channel serves the purpose of resetting, initializing, and
migrating the TPM state, among other things.

The swtpm program behaves like a hardware TPM and therefore needs to be
initialized by the firmware running inside the QEMU virtual machine.
One necessary step for initializing the device is to send the TPM_Startup
command to it. SeaBIOS, for example, has been instrumented to initialize
a TPM 1.2 or TPM 2 device using this command.


QEMU files related to the TPM emulator device:
 - hw/tpm/tpm_emulator.c
 - hw/tpm/tpm_util.c
 - hw/tpm/tpm_util.h


The following commands start the swtpm with a UnixIO control channel over
a socket interface. They do not need to be run as root.

mkdir /tmp/mytpm1
swtpm socket --tpmstate dir=/tmp/mytpm1 \
  --ctrl type=unixio,path=/tmp/mytpm1/swtpm-sock \
  --log level=20

Command line to start QEMU with the TPM emulator device communicating with
the swtpm:

qemu-system-x86_64 -display sdl -enable-kvm \
  -m 1024 -boot d -bios bios-256k.bin -boot menu=on \
  -chardev socket,id=chrtpm,path=/tmp/mytpm1/swtpm-sock \
  -tpmdev emulator,id=tpm0,chardev=chrtpm \
  -device tpm-tis,tpmdev=tpm0 test.img


In case SeaBIOS is used as firmware, it should show the TPM menu item
after entering the menu with 'ESC'.

Select boot device:
1. DVD/CD [ata1-0: QEMU DVD-ROM ATAPI-4 DVD/CD]
[...]
5. Legacy option rom

t. TPM Configuration


The following commands should result in similar output inside the VM with a
Linux kernel that either has the TPM TIS driver built-in or available as a
module:

#> dmesg | grep -i tpm
[    0.711310] tpm_tis 00:06: 1.2 TPM (device=id 0x1, rev-id 1)

#> dmesg | grep TCPA
[    0.000000] ACPI: TCPA 0x0000000003FFD191C 000032 (v02 BOCHS  \
    BXPCTCPA 0000001 BXPC 00000001)

#> ls -l /dev/tpm*
crw-------. 1 root root 10, 224 Jul 11 10:11 /dev/tpm0

#> find /sys/devices/ | grep pcrs$ | xargs cat
PCR-00: 35 4E 3B CE 23 9F 38 59 ...
...
PCR-23: 00 00 00 00 00 00 00 00 ...