#ifndef QEMU_TIMER_H #define QEMU_TIMER_H #include "qemu-common.h" #include "main-loop.h" #include "notify.h" #ifdef __FreeBSD__ #include #endif /* timers */ #define SCALE_MS 1000000 #define SCALE_US 1000 #define SCALE_NS 1 typedef struct QEMUClock QEMUClock; typedef void QEMUTimerCB(void *opaque); /* The real time clock should be used only for stuff which does not change the virtual machine state, as it is run even if the virtual machine is stopped. The real time clock has a frequency of 1000 Hz. */ extern QEMUClock *rt_clock; /* The virtual clock is only run during the emulation. It is stopped when the virtual machine is stopped. Virtual timers use a high precision clock, usually cpu cycles (use ticks_per_sec). */ extern QEMUClock *vm_clock; /* The host clock should be use for device models that emulate accurate real time sources. It will continue to run when the virtual machine is suspended, and it will reflect system time changes the host may undergo (e.g. due to NTP). The host clock has the same precision as the virtual clock. */ extern QEMUClock *host_clock; int64_t qemu_get_clock_ns(QEMUClock *clock); int64_t qemu_clock_has_timers(QEMUClock *clock); int64_t qemu_clock_expired(QEMUClock *clock); int64_t qemu_clock_deadline(QEMUClock *clock); void qemu_clock_enable(QEMUClock *clock, bool enabled); void qemu_clock_warp(QEMUClock *clock); void qemu_register_clock_reset_notifier(QEMUClock *clock, Notifier *notifier); void qemu_unregister_clock_reset_notifier(QEMUClock *clock, Notifier *notifier); QEMUTimer *qemu_new_timer(QEMUClock *clock, int scale, QEMUTimerCB *cb, void *opaque); void qemu_free_timer(QEMUTimer *ts); void qemu_del_timer(QEMUTimer *ts); void qemu_mod_timer_ns(QEMUTimer *ts, int64_t expire_time); void qemu_mod_timer(QEMUTimer *ts, int64_t expire_time); bool qemu_timer_pending(QEMUTimer *ts); bool qemu_timer_expired(QEMUTimer *timer_head, int64_t current_time); uint64_t qemu_timer_expire_time_ns(QEMUTimer *ts); void qemu_run_timers(QEMUClock *clock); void qemu_run_all_timers(void); void configure_alarms(char const *opt); void init_clocks(void); int init_timer_alarm(void); int64_t cpu_get_ticks(void); void cpu_enable_ticks(void); void cpu_disable_ticks(void); static inline QEMUTimer *qemu_new_timer_ns(QEMUClock *clock, QEMUTimerCB *cb, void *opaque) { return qemu_new_timer(clock, SCALE_NS, cb, opaque); } static inline QEMUTimer *qemu_new_timer_ms(QEMUClock *clock, QEMUTimerCB *cb, void *opaque) { return qemu_new_timer(clock, SCALE_MS, cb, opaque); } static inline int64_t qemu_get_clock_ms(QEMUClock *clock) { return qemu_get_clock_ns(clock) / SCALE_MS; } static inline int64_t get_ticks_per_sec(void) { return 1000000000LL; } /* real time host monotonic timer */ static inline int64_t get_clock_realtime(void) { struct timeval tv; gettimeofday(&tv, NULL); return tv.tv_sec * 1000000000LL + (tv.tv_usec * 1000); } /* Warning: don't insert tracepoints into these functions, they are also used by simpletrace backend and tracepoints would cause an infinite recursion! */ #ifdef _WIN32 extern int64_t clock_freq; static inline int64_t get_clock(void) { LARGE_INTEGER ti; QueryPerformanceCounter(&ti); return muldiv64(ti.QuadPart, get_ticks_per_sec(), clock_freq); } #else extern int use_rt_clock; static inline int64_t get_clock(void) { #if defined(__linux__) || (defined(__FreeBSD__) && __FreeBSD_version >= 500000) \ || defined(__DragonFly__) || defined(__FreeBSD_kernel__) if (use_rt_clock) { struct timespec ts; clock_gettime(CLOCK_MONOTONIC, &ts); return ts.tv_sec * 1000000000LL + ts.tv_nsec; } else #endif { /* XXX: using gettimeofday leads to problems if the date changes, so it should be avoided. */ return get_clock_realtime(); } } #endif void qemu_get_timer(QEMUFile *f, QEMUTimer *ts); void qemu_put_timer(QEMUFile *f, QEMUTimer *ts); /* icount */ int64_t cpu_get_icount(void); int64_t cpu_get_clock(void); /*******************************************/ /* host CPU ticks (if available) */ #if defined(_ARCH_PPC) static inline int64_t cpu_get_real_ticks(void) { int64_t retval; #ifdef _ARCH_PPC64 /* This reads timebase in one 64bit go and includes Cell workaround from: http://ozlabs.org/pipermail/linuxppc-dev/2006-October/027052.html */ __asm__ __volatile__ ("mftb %0\n\t" "cmpwi %0,0\n\t" "beq- $-8" : "=r" (retval)); #else /* http://ozlabs.org/pipermail/linuxppc-dev/1999-October/003889.html */ unsigned long junk; __asm__ __volatile__ ("mfspr %1,269\n\t" /* mftbu */ "mfspr %L0,268\n\t" /* mftb */ "mfspr %0,269\n\t" /* mftbu */ "cmpw %0,%1\n\t" "bne $-16" : "=r" (retval), "=r" (junk)); #endif return retval; } #elif defined(__i386__) static inline int64_t cpu_get_real_ticks(void) { int64_t val; asm volatile ("rdtsc" : "=A" (val)); return val; } #elif defined(__x86_64__) static inline int64_t cpu_get_real_ticks(void) { uint32_t low,high; int64_t val; asm volatile("rdtsc" : "=a" (low), "=d" (high)); val = high; val <<= 32; val |= low; return val; } #elif defined(__hppa__) static inline int64_t cpu_get_real_ticks(void) { int val; asm volatile ("mfctl %%cr16, %0" : "=r"(val)); return val; } #elif defined(__ia64) static inline int64_t cpu_get_real_ticks(void) { int64_t val; asm volatile ("mov %0 = ar.itc" : "=r"(val) :: "memory"); return val; } #elif defined(__s390__) static inline int64_t cpu_get_real_ticks(void) { int64_t val; asm volatile("stck 0(%1)" : "=m" (val) : "a" (&val) : "cc"); return val; } #elif defined(__sparc__) static inline int64_t cpu_get_real_ticks (void) { #if defined(_LP64) uint64_t rval; asm volatile("rd %%tick,%0" : "=r"(rval)); return rval; #else /* We need an %o or %g register for this. For recent enough gcc there is an "h" constraint for that. Don't bother with that. */ union { uint64_t i64; struct { uint32_t high; uint32_t low; } i32; } rval; asm volatile("rd %%tick,%%g1; srlx %%g1,32,%0; mov %%g1,%1" : "=r"(rval.i32.high), "=r"(rval.i32.low) : : "g1"); return rval.i64; #endif } #elif defined(__mips__) && \ ((defined(__mips_isa_rev) && __mips_isa_rev >= 2) || defined(__linux__)) /* * binutils wants to use rdhwr only on mips32r2 * but as linux kernel emulate it, it's fine * to use it. * */ #define MIPS_RDHWR(rd, value) { \ __asm__ __volatile__ (".set push\n\t" \ ".set mips32r2\n\t" \ "rdhwr %0, "rd"\n\t" \ ".set pop" \ : "=r" (value)); \ } static inline int64_t cpu_get_real_ticks(void) { /* On kernels >= 2.6.25 rdhwr , $2 and $3 are emulated */ uint32_t count; static uint32_t cyc_per_count = 0; if (!cyc_per_count) { MIPS_RDHWR("$3", cyc_per_count); } MIPS_RDHWR("$2", count); return (int64_t)(count * cyc_per_count); } #elif defined(__alpha__) static inline int64_t cpu_get_real_ticks(void) { uint64_t cc; uint32_t cur, ofs; asm volatile("rpcc %0" : "=r"(cc)); cur = cc; ofs = cc >> 32; return cur - ofs; } #else /* The host CPU doesn't have an easily accessible cycle counter. Just return a monotonically increasing value. This will be totally wrong, but hopefully better than nothing. */ static inline int64_t cpu_get_real_ticks (void) { static int64_t ticks = 0; return ticks++; } #endif #ifdef CONFIG_PROFILER static inline int64_t profile_getclock(void) { return cpu_get_real_ticks(); } extern int64_t qemu_time, qemu_time_start; extern int64_t tlb_flush_time; extern int64_t dev_time; #endif #endif