From 65d06287b19d293aa3908cdab4245432a9910230 Mon Sep 17 00:00:00 2001 From: Paolo Bonzini Date: Wed, 26 Feb 2020 12:30:34 +0100 Subject: docs/system: convert Texinfo documentation to rST MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Apart from targets.rst, which was written by hand, this is an automated conversion obtained with the following command: makeinfo --force -o - --docbook \ -D 'qemu_system_x86 QEMU_SYSTEM_X86_MACRO' \ -D 'qemu_system QEMU_SYSTEM_MACRO' \ $texi | pandoc -f docbook -t rst+smart | perl -e ' $/=undef; $_ = <>; s/^- − /- /gm; s/QEMU_SYSTEM_MACRO/|qemu_system|/g; s/QEMU_SYSTEM_X86_MACRO/|qemu_system_x86|/g; s/(?=::\n\n +\|qemu)/.. parsed-literal/g; s/:\n\n::$/::/gm; print' > $rst In addition, the following changes were made manually: - target-i386.rst and target-mips.rst: replace CPU model documentation with an include directive - monitor.rst: replace the command section with a comment - images.rst: add toctree - target-arm.rst: Replace use of :math: (which Sphinx complains about) with :sup:, and hide it behind |I2C| and |I2C| substitutions. Content that is not @included remains exclusive to qemu-doc.texi. Signed-off-by: Paolo Bonzini Message-id: 20200226113034.6741-19-pbonzini@redhat.com [PMM: Fixed target-arm.rst use of :math:; remove out of date note about images.rst from commit message; fixed expansion of |qemu_system_x86|; use parsed-literal in invocation.rst when we want to use |qemu_system_x86|; fix incorrect subsection level for "OS requirements" in target-i386.rst; fix incorrect syntax for making links to other sections of the manual] Reviewed-by: Peter Maydell Signed-off-by: Peter Maydell --- docs/defs.rst.inc | 3 + docs/system/build-platforms.rst | 79 ++++++++++ docs/system/gdb.rst | 81 ++++++++++ docs/system/images.rst | 85 +++++++++++ docs/system/index.rst | 19 ++- docs/system/invocation.rst | 242 +++++++++++++++++++++++++++++ docs/system/ivshmem.rst | 64 ++++++++ docs/system/keys.rst | 40 +++++ docs/system/license.rst | 11 ++ docs/system/linuxboot.rst | 30 ++++ docs/system/monitor.rst | 25 +++ docs/system/mux-chardev.rst | 32 ++++ docs/system/net.rst | 100 ++++++++++++ docs/system/quickstart.rst | 13 ++ docs/system/target-arm.rst | 227 +++++++++++++++++++++++++++ docs/system/target-i386.rst | 84 ++++++++++ docs/system/target-m68k.rst | 32 ++++ docs/system/target-mips.rst | 120 +++++++++++++++ docs/system/target-ppc.rst | 61 ++++++++ docs/system/target-sparc.rst | 81 ++++++++++ docs/system/target-sparc64.rst | 49 ++++++ docs/system/target-xtensa.rst | 39 +++++ docs/system/targets.rst | 19 +++ docs/system/tls.rst | 328 ++++++++++++++++++++++++++++++++++++++++ docs/system/usb.rst | 137 +++++++++++++++++ docs/system/vnc-security.rst | 202 +++++++++++++++++++++++++ 26 files changed, 2202 insertions(+), 1 deletion(-) create mode 100644 docs/system/build-platforms.rst create mode 100644 docs/system/gdb.rst create mode 100644 docs/system/images.rst create mode 100644 docs/system/invocation.rst create mode 100644 docs/system/ivshmem.rst create mode 100644 docs/system/keys.rst create mode 100644 docs/system/license.rst create mode 100644 docs/system/linuxboot.rst create mode 100644 docs/system/monitor.rst create mode 100644 docs/system/mux-chardev.rst create mode 100644 docs/system/net.rst create mode 100644 docs/system/quickstart.rst create mode 100644 docs/system/target-arm.rst create mode 100644 docs/system/target-i386.rst create mode 100644 docs/system/target-m68k.rst create mode 100644 docs/system/target-mips.rst create mode 100644 docs/system/target-ppc.rst create mode 100644 docs/system/target-sparc.rst create mode 100644 docs/system/target-sparc64.rst create mode 100644 docs/system/target-xtensa.rst create mode 100644 docs/system/targets.rst create mode 100644 docs/system/tls.rst create mode 100644 docs/system/usb.rst create mode 100644 docs/system/vnc-security.rst diff --git a/docs/defs.rst.inc b/docs/defs.rst.inc index 860112c5e4..64ef23ae38 100644 --- a/docs/defs.rst.inc +++ b/docs/defs.rst.inc @@ -4,3 +4,6 @@ also defines some dynamically generated substitutions like CONFDIR. .. |qemu_system| replace:: ``qemu-system-x86_64`` +.. |qemu_system_x86| replace:: ``qemu_system-x86_64`` +.. |I2C| replace:: I\ :sup:`2`\ C +.. |I2S| replace:: I\ :sup:`2`\ S diff --git a/docs/system/build-platforms.rst b/docs/system/build-platforms.rst new file mode 100644 index 0000000000..c2b92a9698 --- /dev/null +++ b/docs/system/build-platforms.rst @@ -0,0 +1,79 @@ +.. _Supported-build-platforms: + +Supported build platforms +========================= + +QEMU aims to support building and executing on multiple host OS +platforms. This appendix outlines which platforms are the major build +targets. These platforms are used as the basis for deciding upon the +minimum required versions of 3rd party software QEMU depends on. The +supported platforms are the targets for automated testing performed by +the project when patches are submitted for review, and tested before and +after merge. + +If a platform is not listed here, it does not imply that QEMU won't +work. If an unlisted platform has comparable software versions to a +listed platform, there is every expectation that it will work. Bug +reports are welcome for problems encountered on unlisted platforms +unless they are clearly older vintage than what is described here. + +Note that when considering software versions shipped in distros as +support targets, QEMU considers only the version number, and assumes the +features in that distro match the upstream release with the same +version. In other words, if a distro backports extra features to the +software in their distro, QEMU upstream code will not add explicit +support for those backports, unless the feature is auto-detectable in a +manner that works for the upstream releases too. + +The Repology site https://repology.org is a useful resource to identify +currently shipped versions of software in various operating systems, +though it does not cover all distros listed below. + +Linux OS +-------- + +For distributions with frequent, short-lifetime releases, the project +will aim to support all versions that are not end of life by their +respective vendors. For the purposes of identifying supported software +versions, the project will look at Fedora, Ubuntu, and openSUSE distros. +Other short- lifetime distros will be assumed to ship similar software +versions. + +For distributions with long-lifetime releases, the project will aim to +support the most recent major version at all times. Support for the +previous major version will be dropped 2 years after the new major +version is released, or when it reaches "end of life". For the purposes +of identifying supported software versions, the project will look at +RHEL, Debian, Ubuntu LTS, and SLES distros. Other long-lifetime distros +will be assumed to ship similar software versions. + +Windows +------- + +The project supports building with current versions of the MinGW +toolchain, hosted on Linux. + +macOS +----- + +The project supports building with the two most recent versions of +macOS, with the current homebrew package set available. + +FreeBSD +------- + +The project aims to support the all the versions which are not end of +life. + +NetBSD +------ + +The project aims to support the most recent major version at all times. +Support for the previous major version will be dropped 2 years after the +new major version is released. + +OpenBSD +------- + +The project aims to support the all the versions which are not end of +life. diff --git a/docs/system/gdb.rst b/docs/system/gdb.rst new file mode 100644 index 0000000000..639f814b32 --- /dev/null +++ b/docs/system/gdb.rst @@ -0,0 +1,81 @@ +.. _gdb_005fusage: + +GDB usage +--------- + +QEMU has a primitive support to work with gdb, so that you can do +'Ctrl-C' while the virtual machine is running and inspect its state. + +In order to use gdb, launch QEMU with the '-s' option. It will wait for +a gdb connection: + +.. parsed-literal:: + + |qemu_system| -s -kernel bzImage -hda rootdisk.img -append "root=/dev/hda" + Connected to host network interface: tun0 + Waiting gdb connection on port 1234 + +Then launch gdb on the 'vmlinux' executable:: + + > gdb vmlinux + +In gdb, connect to QEMU:: + + (gdb) target remote localhost:1234 + +Then you can use gdb normally. For example, type 'c' to launch the +kernel:: + + (gdb) c + +Here are some useful tips in order to use gdb on system code: + +1. Use ``info reg`` to display all the CPU registers. + +2. Use ``x/10i $eip`` to display the code at the PC position. + +3. Use ``set architecture i8086`` to dump 16 bit code. Then use + ``x/10i $cs*16+$eip`` to dump the code at the PC position. + +Advanced debugging options: + +The default single stepping behavior is step with the IRQs and timer +service routines off. It is set this way because when gdb executes a +single step it expects to advance beyond the current instruction. With +the IRQs and timer service routines on, a single step might jump into +the one of the interrupt or exception vectors instead of executing the +current instruction. This means you may hit the same breakpoint a number +of times before executing the instruction gdb wants to have executed. +Because there are rare circumstances where you want to single step into +an interrupt vector the behavior can be controlled from GDB. There are +three commands you can query and set the single step behavior: + +``maintenance packet qqemu.sstepbits`` + This will display the MASK bits used to control the single stepping + IE: + + :: + + (gdb) maintenance packet qqemu.sstepbits + sending: "qqemu.sstepbits" + received: "ENABLE=1,NOIRQ=2,NOTIMER=4" + +``maintenance packet qqemu.sstep`` + This will display the current value of the mask used when single + stepping IE: + + :: + + (gdb) maintenance packet qqemu.sstep + sending: "qqemu.sstep" + received: "0x7" + +``maintenance packet Qqemu.sstep=HEX_VALUE`` + This will change the single step mask, so if wanted to enable IRQs on + the single step, but not timers, you would use: + + :: + + (gdb) maintenance packet Qqemu.sstep=0x5 + sending: "qemu.sstep=0x5" + received: "OK" diff --git a/docs/system/images.rst b/docs/system/images.rst new file mode 100644 index 0000000000..ff26bf9587 --- /dev/null +++ b/docs/system/images.rst @@ -0,0 +1,85 @@ +.. _disk_005fimages: + +Disk Images +----------- + +QEMU supports many disk image formats, including growable disk images +(their size increase as non empty sectors are written), compressed and +encrypted disk images. + +.. _disk_005fimages_005fquickstart: + +Quick start for disk image creation +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +You can create a disk image with the command:: + + qemu-img create myimage.img mysize + +where myimage.img is the disk image filename and mysize is its size in +kilobytes. You can add an ``M`` suffix to give the size in megabytes and +a ``G`` suffix for gigabytes. + +See the qemu-img invocation documentation for more information. + +.. _disk_005fimages_005fsnapshot_005fmode: + +Snapshot mode +~~~~~~~~~~~~~ + +If you use the option ``-snapshot``, all disk images are considered as +read only. When sectors in written, they are written in a temporary file +created in ``/tmp``. You can however force the write back to the raw +disk images by using the ``commit`` monitor command (or C-a s in the +serial console). + +.. _vm_005fsnapshots: + +VM snapshots +~~~~~~~~~~~~ + +VM snapshots are snapshots of the complete virtual machine including CPU +state, RAM, device state and the content of all the writable disks. In +order to use VM snapshots, you must have at least one non removable and +writable block device using the ``qcow2`` disk image format. Normally +this device is the first virtual hard drive. + +Use the monitor command ``savevm`` to create a new VM snapshot or +replace an existing one. A human readable name can be assigned to each +snapshot in addition to its numerical ID. + +Use ``loadvm`` to restore a VM snapshot and ``delvm`` to remove a VM +snapshot. ``info snapshots`` lists the available snapshots with their +associated information:: + + (qemu) info snapshots + Snapshot devices: hda + Snapshot list (from hda): + ID TAG VM SIZE DATE VM CLOCK + 1 start 41M 2006-08-06 12:38:02 00:00:14.954 + 2 40M 2006-08-06 12:43:29 00:00:18.633 + 3 msys 40M 2006-08-06 12:44:04 00:00:23.514 + +A VM snapshot is made of a VM state info (its size is shown in +``info snapshots``) and a snapshot of every writable disk image. The VM +state info is stored in the first ``qcow2`` non removable and writable +block device. The disk image snapshots are stored in every disk image. +The size of a snapshot in a disk image is difficult to evaluate and is +not shown by ``info snapshots`` because the associated disk sectors are +shared among all the snapshots to save disk space (otherwise each +snapshot would need a full copy of all the disk images). + +When using the (unrelated) ``-snapshot`` option +(:ref:`disk_005fimages_005fsnapshot_005fmode`), +you can always make VM snapshots, but they are deleted as soon as you +exit QEMU. + +VM snapshots currently have the following known limitations: + +- They cannot cope with removable devices if they are removed or + inserted after a snapshot is done. + +- A few device drivers still have incomplete snapshot support so their + state is not saved or restored properly (in particular USB). + +.. include:: qemu-block-drivers.rst.inc diff --git a/docs/system/index.rst b/docs/system/index.rst index 467cda3e72..c0f685b818 100644 --- a/docs/system/index.rst +++ b/docs/system/index.rst @@ -12,7 +12,24 @@ or Hypervisor.Framework. Contents: .. toctree:: - :maxdepth: 2 + :maxdepth: 3 + + quickstart + invocation + keys + mux-chardev + monitor + images + net + usb + ivshmem + linuxboot + vnc-security + tls + gdb managed-startup + targets security deprecated + build-platforms + license diff --git a/docs/system/invocation.rst b/docs/system/invocation.rst new file mode 100644 index 0000000000..c112bcb45a --- /dev/null +++ b/docs/system/invocation.rst @@ -0,0 +1,242 @@ +.. _sec_005finvocation: + +Invocation +---------- + +.. parsed-literal:: + + |qemu_system| [options] [disk_image] + +disk_image is a raw hard disk image for IDE hard disk 0. Some targets do +not need a disk image. + +Device URL Syntax +~~~~~~~~~~~~~~~~~ + +In addition to using normal file images for the emulated storage +devices, QEMU can also use networked resources such as iSCSI devices. +These are specified using a special URL syntax. + +``iSCSI`` + iSCSI support allows QEMU to access iSCSI resources directly and use + as images for the guest storage. Both disk and cdrom images are + supported. + + Syntax for specifying iSCSI LUNs is + "iscsi://[:]//" + + By default qemu will use the iSCSI initiator-name + 'iqn.2008-11.org.linux-kvm[:]' but this can also be set from + the command line or a configuration file. + + Since version Qemu 2.4 it is possible to specify a iSCSI request + timeout to detect stalled requests and force a reestablishment of the + session. The timeout is specified in seconds. The default is 0 which + means no timeout. Libiscsi 1.15.0 or greater is required for this + feature. + + Example (without authentication): + + .. parsed-literal:: + + |qemu_system| -iscsi initiator-name=iqn.2001-04.com.example:my-initiator \ + -cdrom iscsi://192.0.2.1/iqn.2001-04.com.example/2 \ + -drive file=iscsi://192.0.2.1/iqn.2001-04.com.example/1 + + Example (CHAP username/password via URL): + + .. parsed-literal:: + + |qemu_system| -drive file=iscsi://user%password@192.0.2.1/iqn.2001-04.com.example/1 + + Example (CHAP username/password via environment variables): + + .. parsed-literal:: + + LIBISCSI_CHAP_USERNAME="user" \ + LIBISCSI_CHAP_PASSWORD="password" \ + |qemu_system| -drive file=iscsi://192.0.2.1/iqn.2001-04.com.example/1 + +``NBD`` + QEMU supports NBD (Network Block Devices) both using TCP protocol as + well as Unix Domain Sockets. With TCP, the default port is 10809. + + Syntax for specifying a NBD device using TCP, in preferred URI form: + "nbd://[:]/[]" + + Syntax for specifying a NBD device using Unix Domain Sockets; + remember that '?' is a shell glob character and may need quoting: + "nbd+unix:///[]?socket=" + + Older syntax that is also recognized: + "nbd::[:exportname=]" + + Syntax for specifying a NBD device using Unix Domain Sockets + "nbd:unix:[:exportname=]" + + Example for TCP + + .. parsed-literal:: + + |qemu_system| --drive file=nbd:192.0.2.1:30000 + + Example for Unix Domain Sockets + + .. parsed-literal:: + + |qemu_system| --drive file=nbd:unix:/tmp/nbd-socket + +``SSH`` + QEMU supports SSH (Secure Shell) access to remote disks. + + Examples: + + .. parsed-literal:: + + |qemu_system| -drive file=ssh://user@host/path/to/disk.img + |qemu_system| -drive file.driver=ssh,file.user=user,file.host=host,file.port=22,file.path=/path/to/disk.img + + Currently authentication must be done using ssh-agent. Other + authentication methods may be supported in future. + +``Sheepdog`` + Sheepdog is a distributed storage system for QEMU. QEMU supports + using either local sheepdog devices or remote networked devices. + + Syntax for specifying a sheepdog device + + :: + + sheepdog[+tcp|+unix]://[host:port]/vdiname[?socket=path][#snapid|#tag] + + Example + + .. parsed-literal:: + + |qemu_system| --drive file=sheepdog://192.0.2.1:30000/MyVirtualMachine + + See also https://sheepdog.github.io/sheepdog/. + +``GlusterFS`` + GlusterFS is a user space distributed file system. QEMU supports the + use of GlusterFS volumes for hosting VM disk images using TCP, Unix + Domain Sockets and RDMA transport protocols. + + Syntax for specifying a VM disk image on GlusterFS volume is + + .. parsed-literal:: + + URI: + gluster[+type]://[host[:port]]/volume/path[?socket=...][,debug=N][,logfile=...] + + JSON: + 'json:{"driver":"qcow2","file":{"driver":"gluster","volume":"testvol","path":"a.img","debug":N,"logfile":"...", +   "server":[{"type":"tcp","host":"...","port":"..."}, +   {"type":"unix","socket":"..."}]}}' + + Example + + .. parsed-literal:: + + URI: + |qemu_system| --drive file=gluster://192.0.2.1/testvol/a.img, +   file.debug=9,file.logfile=/var/log/qemu-gluster.log + + JSON: + |qemu_system| 'json:{"driver":"qcow2", +   "file":{"driver":"gluster", +   "volume":"testvol","path":"a.img", +   "debug":9,"logfile":"/var/log/qemu-gluster.log", +   "server":[{"type":"tcp","host":"1.2.3.4","port":24007}, +   {"type":"unix","socket":"/var/run/glusterd.socket"}]}}' + |qemu_system| -drive driver=qcow2,file.driver=gluster,file.volume=testvol,file.path=/path/a.img, +   file.debug=9,file.logfile=/var/log/qemu-gluster.log, +   file.server.0.type=tcp,file.server.0.host=1.2.3.4,file.server.0.port=24007, +   file.server.1.type=unix,file.server.1.socket=/var/run/glusterd.socket + + See also http://www.gluster.org. + +``HTTP/HTTPS/FTP/FTPS`` + QEMU supports read-only access to files accessed over http(s) and + ftp(s). + + Syntax using a single filename: + + :: + + ://[[:]@]/ + + where: + + ``protocol`` + 'http', 'https', 'ftp', or 'ftps'. + + ``username`` + Optional username for authentication to the remote server. + + ``password`` + Optional password for authentication to the remote server. + + ``host`` + Address of the remote server. + + ``path`` + Path on the remote server, including any query string. + + The following options are also supported: + + ``url`` + The full URL when passing options to the driver explicitly. + + ``readahead`` + The amount of data to read ahead with each range request to the + remote server. This value may optionally have the suffix 'T', 'G', + 'M', 'K', 'k' or 'b'. If it does not have a suffix, it will be + assumed to be in bytes. The value must be a multiple of 512 bytes. + It defaults to 256k. + + ``sslverify`` + Whether to verify the remote server's certificate when connecting + over SSL. It can have the value 'on' or 'off'. It defaults to + 'on'. + + ``cookie`` + Send this cookie (it can also be a list of cookies separated by + ';') with each outgoing request. Only supported when using + protocols such as HTTP which support cookies, otherwise ignored. + + ``timeout`` + Set the timeout in seconds of the CURL connection. This timeout is + the time that CURL waits for a response from the remote server to + get the size of the image to be downloaded. If not set, the + default timeout of 5 seconds is used. + + Note that when passing options to qemu explicitly, ``driver`` is the + value of . + + Example: boot from a remote Fedora 20 live ISO image + + .. parsed-literal:: + + |qemu_system_x86| --drive media=cdrom,file=https://archives.fedoraproject.org/pub/archive/fedora/linux/releases/20/Live/x86_64/Fedora-Live-Desktop-x86_64-20-1.iso,readonly + + |qemu_system_x86| --drive media=cdrom,file.driver=http,file.url=http://archives.fedoraproject.org/pub/fedora/linux/releases/20/Live/x86_64/Fedora-Live-Desktop-x86_64-20-1.iso,readonly + + Example: boot from a remote Fedora 20 cloud image using a local + overlay for writes, copy-on-read, and a readahead of 64k + + .. parsed-literal:: + + qemu-img create -f qcow2 -o backing_file='json:{"file.driver":"http",, "file.url":"http://archives.fedoraproject.org/pub/archive/fedora/linux/releases/20/Images/x86_64/Fedora-x86_64-20-20131211.1-sda.qcow2",, "file.readahead":"64k"}' /tmp/Fedora-x86_64-20-20131211.1-sda.qcow2 + + |qemu_system_x86| -drive file=/tmp/Fedora-x86_64-20-20131211.1-sda.qcow2,copy-on-read=on + + Example: boot from an image stored on a VMware vSphere server with a + self-signed certificate using a local overlay for writes, a readahead + of 64k and a timeout of 10 seconds. + + .. parsed-literal:: + + qemu-img create -f qcow2 -o backing_file='json:{"file.driver":"https",, "file.url":"https://user:password@vsphere.example.com/folder/test/test-flat.vmdk?dcPath=Datacenter&dsName=datastore1",, "file.sslverify":"off",, "file.readahead":"64k",, "file.timeout":10}' /tmp/test.qcow2 + + |qemu_system_x86| -drive file=/tmp/test.qcow2 diff --git a/docs/system/ivshmem.rst b/docs/system/ivshmem.rst new file mode 100644 index 0000000000..b03a48afa3 --- /dev/null +++ b/docs/system/ivshmem.rst @@ -0,0 +1,64 @@ +.. _pcsys_005fivshmem: + +Inter-VM Shared Memory device +----------------------------- + +On Linux hosts, a shared memory device is available. The basic syntax +is: + +.. parsed-literal:: + + |qemu_system_x86| -device ivshmem-plain,memdev=hostmem + +where hostmem names a host memory backend. For a POSIX shared memory +backend, use something like + +:: + + -object memory-backend-file,size=1M,share,mem-path=/dev/shm/ivshmem,id=hostmem + +If desired, interrupts can be sent between guest VMs accessing the same +shared memory region. Interrupt support requires using a shared memory +server and using a chardev socket to connect to it. The code for the +shared memory server is qemu.git/contrib/ivshmem-server. An example +syntax when using the shared memory server is: + +.. parsed-literal:: + + # First start the ivshmem server once and for all + ivshmem-server -p pidfile -S path -m shm-name -l shm-size -n vectors + + # Then start your qemu instances with matching arguments + |qemu_system_x86| -device ivshmem-doorbell,vectors=vectors,chardev=id + -chardev socket,path=path,id=id + +When using the server, the guest will be assigned a VM ID (>=0) that +allows guests using the same server to communicate via interrupts. +Guests can read their VM ID from a device register (see +ivshmem-spec.txt). + +Migration with ivshmem +~~~~~~~~~~~~~~~~~~~~~~ + +With device property ``master=on``, the guest will copy the shared +memory on migration to the destination host. With ``master=off``, the +guest will not be able to migrate with the device attached. In the +latter case, the device should be detached and then reattached after +migration using the PCI hotplug support. + +At most one of the devices sharing the same memory can be master. The +master must complete migration before you plug back the other devices. + +ivshmem and hugepages +~~~~~~~~~~~~~~~~~~~~~ + +Instead of specifying the using POSIX shm, you may specify a +memory backend that has hugepage support: + +.. parsed-literal:: + + |qemu_system_x86| -object memory-backend-file,size=1G,mem-path=/dev/hugepages/my-shmem-file,share,id=mb1 + -device ivshmem-plain,memdev=mb1 + +ivshmem-server also supports hugepages mount points with the ``-m`` +memory path argument. diff --git a/docs/system/keys.rst b/docs/system/keys.rst new file mode 100644 index 0000000000..bf99ee8d5b --- /dev/null +++ b/docs/system/keys.rst @@ -0,0 +1,40 @@ +.. _pcsys_005fkeys: + +Keys in the graphical frontends +------------------------------- + +During the graphical emulation, you can use special key combinations to +change modes. The default key mappings are shown below, but if you use +``-alt-grab`` then the modifier is Ctrl-Alt-Shift (instead of Ctrl-Alt) +and if you use ``-ctrl-grab`` then the modifier is the right Ctrl key +(instead of Ctrl-Alt): + +Ctrl-Alt-f + Toggle full screen + +Ctrl-Alt-+ + Enlarge the screen + +Ctrl-Alt\-- + Shrink the screen + +Ctrl-Alt-u + Restore the screen's un-scaled dimensions + +Ctrl-Alt-n + Switch to virtual console 'n'. Standard console mappings are: + + *1* + Target system display + + *2* + Monitor + + *3* + Serial port + +Ctrl-Alt + Toggle mouse and keyboard grab. + +In the virtual consoles, you can use Ctrl-Up, Ctrl-Down, Ctrl-PageUp and +Ctrl-PageDown to move in the back log. diff --git a/docs/system/license.rst b/docs/system/license.rst new file mode 100644 index 0000000000..cde3d2d25d --- /dev/null +++ b/docs/system/license.rst @@ -0,0 +1,11 @@ +.. _License: + +License +======= + +QEMU is a trademark of Fabrice Bellard. + +QEMU is released under the `GNU General Public +License `__, version 2. Parts +of QEMU have specific licenses, see file +`LICENSE `__. diff --git a/docs/system/linuxboot.rst b/docs/system/linuxboot.rst new file mode 100644 index 0000000000..228650abc5 --- /dev/null +++ b/docs/system/linuxboot.rst @@ -0,0 +1,30 @@ +.. _direct_005flinux_005fboot: + +Direct Linux Boot +----------------- + +This section explains how to launch a Linux kernel inside QEMU without +having to make a full bootable image. It is very useful for fast Linux +kernel testing. + +The syntax is: + +.. parsed-literal:: + + |qemu_system| -kernel bzImage -hda rootdisk.img -append "root=/dev/hda" + +Use ``-kernel`` to provide the Linux kernel image and ``-append`` to +give the kernel command line arguments. The ``-initrd`` option can be +used to provide an INITRD image. + +If you do not need graphical output, you can disable it and redirect the +virtual serial port and the QEMU monitor to the console with the +``-nographic`` option. The typical command line is: + +.. parsed-literal:: + + |qemu_system| -kernel bzImage -hda rootdisk.img \ + -append "root=/dev/hda console=ttyS0" -nographic + +Use Ctrl-a c to switch between the serial console and the monitor (see +:ref:`pcsys_005fkeys`). diff --git a/docs/system/monitor.rst b/docs/system/monitor.rst new file mode 100644 index 0000000000..482f391f32 --- /dev/null +++ b/docs/system/monitor.rst @@ -0,0 +1,25 @@ +.. _pcsys_005fmonitor: + +QEMU Monitor +------------ + +The QEMU monitor is used to give complex commands to the QEMU emulator. +You can use it to: + +- Remove or insert removable media images (such as CD-ROM or + floppies). + +- Freeze/unfreeze the Virtual Machine (VM) and save or restore its + state from a disk file. + +- Inspect the VM state without an external debugger. + +.. + The commands section goes here once it's converted from Texinfo to RST. + +Integer expressions +~~~~~~~~~~~~~~~~~~~ + +The monitor understands integers expressions for every integer argument. +You can use register names to get the value of specifics CPU registers +by prefixing them with *$*. diff --git a/docs/system/mux-chardev.rst b/docs/system/mux-chardev.rst new file mode 100644 index 0000000000..e50172c081 --- /dev/null +++ b/docs/system/mux-chardev.rst @@ -0,0 +1,32 @@ +.. _mux_005fkeys: + +Keys in the character backend multiplexer +----------------------------------------- + +During emulation, if you are using a character backend multiplexer +(which is the default if you are using ``-nographic``) then several +commands are available via an escape sequence. These key sequences all +start with an escape character, which is Ctrl-a by default, but can be +changed with ``-echr``. The list below assumes you're using the default. + +Ctrl-a h + Print this help + +Ctrl-a x + Exit emulator + +Ctrl-a s + Save disk data back to file (if -snapshot) + +Ctrl-a t + Toggle console timestamps + +Ctrl-a b + Send break (magic sysrq in Linux) + +Ctrl-a c + Rotate between the frontends connected to the multiplexer (usually + this switches between the monitor and the console) + +Ctrl-a Ctrl-a + Send the escape character to the frontend diff --git a/docs/system/net.rst b/docs/system/net.rst new file mode 100644 index 0000000000..4b2640c448 --- /dev/null +++ b/docs/system/net.rst @@ -0,0 +1,100 @@ +.. _pcsys_005fnetwork: + +Network emulation +----------------- + +QEMU can simulate several network cards (e.g. PCI or ISA cards on the PC +target) and can connect them to a network backend on the host or an +emulated hub. The various host network backends can either be used to +connect the NIC of the guest to a real network (e.g. by using a TAP +devices or the non-privileged user mode network stack), or to other +guest instances running in another QEMU process (e.g. by using the +socket host network backend). + +Using TAP network interfaces +~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +This is the standard way to connect QEMU to a real network. QEMU adds a +virtual network device on your host (called ``tapN``), and you can then +configure it as if it was a real ethernet card. + +Linux host +^^^^^^^^^^ + +As an example, you can download the ``linux-test-xxx.tar.gz`` archive +and copy the script ``qemu-ifup`` in ``/etc`` and configure properly +``sudo`` so that the command ``ifconfig`` contained in ``qemu-ifup`` can +be executed as root. You must verify that your host kernel supports the +TAP network interfaces: the device ``/dev/net/tun`` must be present. + +See :ref:`sec_005finvocation` to have examples of command +lines using the TAP network interfaces. + +Windows host +^^^^^^^^^^^^ + +There is a virtual ethernet driver for Windows 2000/XP systems, called +TAP-Win32. But it is not included in standard QEMU for Windows, so you +will need to get it separately. It is part of OpenVPN package, so +download OpenVPN from : https://openvpn.net/. + +Using the user mode network stack +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +By using the option ``-net user`` (default configuration if no ``-net`` +option is specified), QEMU uses a completely user mode network stack +(you don't need root privilege to use the virtual network). The virtual +network configuration is the following:: + + guest (10.0.2.15) <------> Firewall/DHCP server <-----> Internet + | (10.0.2.2) + | + ----> DNS server (10.0.2.3) + | + ----> SMB server (10.0.2.4) + +The QEMU VM behaves as if it was behind a firewall which blocks all +incoming connections. You can use a DHCP client to automatically +configure the network in the QEMU VM. The DHCP server assign addresses +to the hosts starting from 10.0.2.15. + +In order to check that the user mode network is working, you can ping +the address 10.0.2.2 and verify that you got an address in the range +10.0.2.x from the QEMU virtual DHCP server. + +Note that ICMP traffic in general does not work with user mode +networking. ``ping``, aka. ICMP echo, to the local router (10.0.2.2) +shall work, however. If you're using QEMU on Linux >= 3.0, it can use +unprivileged ICMP ping sockets to allow ``ping`` to the Internet. The +host admin has to set the ping_group_range in order to grant access to +those sockets. To allow ping for GID 100 (usually users group):: + + echo 100 100 > /proc/sys/net/ipv4/ping_group_range + +When using the built-in TFTP server, the router is also the TFTP server. + +When using the ``'-netdev user,hostfwd=...'`` option, TCP or UDP +connections can be redirected from the host to the guest. It allows for +example to redirect X11, telnet or SSH connections. + +Hubs +~~~~ + +QEMU can simulate several hubs. A hub can be thought of as a virtual +connection between several network devices. These devices can be for +example QEMU virtual ethernet cards or virtual Host ethernet devices +(TAP devices). You can connect guest NICs or host network backends to +such a hub using the ``-netdev +hubport`` or ``-nic hubport`` options. The legacy ``-net`` option also +connects the given device to the emulated hub with ID 0 (i.e. the +default hub) unless you specify a netdev with ``-net nic,netdev=xxx`` +here. + +Connecting emulated networks between QEMU instances +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Using the ``-netdev socket`` (or ``-nic socket`` or ``-net socket``) +option, it is possible to create emulated networks that span several +QEMU instances. See the description of the ``-netdev socket`` option in +:ref:`sec_005finvocation` to have a basic +example. diff --git a/docs/system/quickstart.rst b/docs/system/quickstart.rst new file mode 100644 index 0000000000..3a3acab5e7 --- /dev/null +++ b/docs/system/quickstart.rst @@ -0,0 +1,13 @@ +.. _pcsys_005fquickstart: + +Quick Start +----------- + +Download and uncompress a PC hard disk image with Linux installed (e.g. +``linux.img``) and type: + +.. parsed-literal:: + + |qemu_system| linux.img + +Linux should boot and give you a prompt. diff --git a/docs/system/target-arm.rst b/docs/system/target-arm.rst new file mode 100644 index 0000000000..0490be5587 --- /dev/null +++ b/docs/system/target-arm.rst @@ -0,0 +1,227 @@ +.. _ARM-System-emulator: + +ARM System emulator +------------------- + +Use the executable ``qemu-system-arm`` to simulate a ARM machine. The +ARM Integrator/CP board is emulated with the following devices: + +- ARM926E, ARM1026E, ARM946E, ARM1136 or Cortex-A8 CPU + +- Two PL011 UARTs + +- SMC 91c111 Ethernet adapter + +- PL110 LCD controller + +- PL050 KMI with PS/2 keyboard and mouse. + +- PL181 MultiMedia Card Interface with SD card. + +The ARM Versatile baseboard is emulated with the following devices: + +- ARM926E, ARM1136 or Cortex-A8 CPU + +- PL190 Vectored Interrupt Controller + +- Four PL011 UARTs + +- SMC 91c111 Ethernet adapter + +- PL110 LCD controller + +- PL050 KMI with PS/2 keyboard and mouse. + +- PCI host bridge. Note the emulated PCI bridge only provides access + to PCI memory space. It does not provide access to PCI IO space. This + means some devices (eg. ne2k_pci NIC) are not usable, and others (eg. + rtl8139 NIC) are only usable when the guest drivers use the memory + mapped control registers. + +- PCI OHCI USB controller. + +- LSI53C895A PCI SCSI Host Bus Adapter with hard disk and CD-ROM + devices. + +- PL181 MultiMedia Card Interface with SD card. + +Several variants of the ARM RealView baseboard are emulated, including +the EB, PB-A8 and PBX-A9. Due to interactions with the bootloader, only +certain Linux kernel configurations work out of the box on these boards. + +Kernels for the PB-A8 board should have CONFIG_REALVIEW_HIGH_PHYS_OFFSET +enabled in the kernel, and expect 512M RAM. Kernels for The PBX-A9 board +should have CONFIG_SPARSEMEM enabled, CONFIG_REALVIEW_HIGH_PHYS_OFFSET +disabled and expect 1024M RAM. + +The following devices are emulated: + +- ARM926E, ARM1136, ARM11MPCore, Cortex-A8 or Cortex-A9 MPCore CPU + +- ARM AMBA Generic/Distributed Interrupt Controller + +- Four PL011 UARTs + +- SMC 91c111 or SMSC LAN9118 Ethernet adapter + +- PL110 LCD controller + +- PL050 KMI with PS/2 keyboard and mouse + +- PCI host bridge + +- PCI OHCI USB controller + +- LSI53C895A PCI SCSI Host Bus Adapter with hard disk and CD-ROM + devices + +- PL181 MultiMedia Card Interface with SD card. + +The XScale-based clamshell PDA models (\"Spitz\", \"Akita\", \"Borzoi\" +and \"Terrier\") emulation includes the following peripherals: + +- Intel PXA270 System-on-chip (ARM V5TE core) + +- NAND Flash memory + +- IBM/Hitachi DSCM microdrive in a PXA PCMCIA slot - not in \"Akita\" + +- On-chip OHCI USB controller + +- On-chip LCD controller + +- On-chip Real Time Clock + +- TI ADS7846 touchscreen controller on SSP bus + +- Maxim MAX1111 analog-digital converter on |I2C| bus + +- GPIO-connected keyboard controller and LEDs + +- Secure Digital card connected to PXA MMC/SD host + +- Three on-chip UARTs + +- WM8750 audio CODEC on |I2C| and |I2S| busses + +The Palm Tungsten|E PDA (codename \"Cheetah\") emulation includes the +following elements: + +- Texas Instruments OMAP310 System-on-chip (ARM 925T core) + +- ROM and RAM memories (ROM firmware image can be loaded with + -option-rom) + +- On-chip LCD controller + +- On-chip Real Time Clock + +- TI TSC2102i touchscreen controller / analog-digital converter / + Audio CODEC, connected through MicroWire and |I2S| busses + +- GPIO-connected matrix keypad + +- Secure Digital card connected to OMAP MMC/SD host + +- Three on-chip UARTs + +Nokia N800 and N810 internet tablets (known also as RX-34 and RX-44 / +48) emulation supports the following elements: + +- Texas Instruments OMAP2420 System-on-chip (ARM 1136 core) + +- RAM and non-volatile OneNAND Flash memories + +- Display connected to EPSON remote framebuffer chip and OMAP on-chip + display controller and a LS041y3 MIPI DBI-C controller + +- TI TSC2301 (in N800) and TI TSC2005 (in N810) touchscreen + controllers driven through SPI bus + +- National Semiconductor LM8323-controlled qwerty keyboard driven + through |I2C| bus + +- Secure Digital card connected to OMAP MMC/SD host + +- Three OMAP on-chip UARTs and on-chip STI debugging console + +- Mentor Graphics \"Inventra\" dual-role USB controller embedded in a + TI TUSB6010 chip - only USB host mode is supported + +- TI TMP105 temperature sensor driven through |I2C| bus + +- TI TWL92230C power management companion with an RTC on + |I2C| bus + +- Nokia RETU and TAHVO multi-purpose chips with an RTC, connected + through CBUS + +The Luminary Micro Stellaris LM3S811EVB emulation includes the following +devices: + +- Cortex-M3 CPU core. + +- 64k Flash and 8k SRAM. + +- Timers, UARTs, ADC and |I2C| interface. + +- OSRAM Pictiva 96x16 OLED with SSD0303 controller on + |I2C| bus. + +The Luminary Micro Stellaris LM3S6965EVB emulation includes the +following devices: + +- Cortex-M3 CPU core. + +- 256k Flash and 64k SRAM. + +- Timers, UARTs, ADC, |I2C| and SSI interfaces. + +- OSRAM Pictiva 128x64 OLED with SSD0323 controller connected via + SSI. + +The Freecom MusicPal internet radio emulation includes the following +elements: + +- Marvell MV88W8618 ARM core. + +- 32 MB RAM, 256 KB SRAM, 8 MB flash. + +- Up to 2 16550 UARTs + +- MV88W8xx8 Ethernet controller + +- MV88W8618 audio controller, WM8750 CODEC and mixer + +- 128x64 display with brightness control + +- 2 buttons, 2 navigation wheels with button function + +The Siemens SX1 models v1 and v2 (default) basic emulation. The +emulation includes the following elements: + +- Texas Instruments OMAP310 System-on-chip (ARM 925T core) + +- ROM and RAM memories (ROM firmware image can be loaded with + -pflash) V1 1 Flash of 16MB and 1 Flash of 8MB V2 1 Flash of 32MB + +- On-chip LCD controller + +- On-chip Real Time Clock + +- Secure Digital card connected to OMAP MMC/SD host + +- Three on-chip UARTs + +A Linux 2.6 test image is available on the QEMU web site. More +information is available in the QEMU mailing-list archive. + +The following options are specific to the ARM emulation: + +``-semihosting`` + Enable semihosting syscall emulation. + + On ARM this implements the \"Angel\" interface. + + Note that this allows guest direct access to the host filesystem, so + should only be used with trusted guest OS. diff --git a/docs/system/target-i386.rst b/docs/system/target-i386.rst new file mode 100644 index 0000000000..92e2038b11 --- /dev/null +++ b/docs/system/target-i386.rst @@ -0,0 +1,84 @@ +.. _QEMU-PC-System-emulator: + +x86 (PC) System emulator +------------------------ + +.. _pcsys_005fdevices: + +Peripherals +~~~~~~~~~~~ + +The QEMU PC System emulator simulates the following peripherals: + +- i440FX host PCI bridge and PIIX3 PCI to ISA bridge + +- Cirrus CLGD 5446 PCI VGA card or dummy VGA card with Bochs VESA + extensions (hardware level, including all non standard modes). + +- PS/2 mouse and keyboard + +- 2 PCI IDE interfaces with hard disk and CD-ROM support + +- Floppy disk + +- PCI and ISA network adapters + +- Serial ports + +- IPMI BMC, either and internal or external one + +- Creative SoundBlaster 16 sound card + +- ENSONIQ AudioPCI ES1370 sound card + +- Intel 82801AA AC97 Audio compatible sound card + +- Intel HD Audio Controller and HDA codec + +- Adlib (OPL2) - Yamaha YM3812 compatible chip + +- Gravis Ultrasound GF1 sound card + +- CS4231A compatible sound card + +- PCI UHCI, OHCI, EHCI or XHCI USB controller and a virtual USB-1.1 + hub. + +SMP is supported with up to 255 CPUs. + +QEMU uses the PC BIOS from the Seabios project and the Plex86/Bochs LGPL +VGA BIOS. + +QEMU uses YM3812 emulation by Tatsuyuki Satoh. + +QEMU uses GUS emulation (GUSEMU32 http://www.deinmeister.de/gusemu/) by +Tibor \"TS\" Schütz. + +Note that, by default, GUS shares IRQ(7) with parallel ports and so QEMU +must be told to not have parallel ports to have working GUS. + +.. parsed-literal:: + + |qemu_system_x86| dos.img -soundhw gus -parallel none + +Alternatively: + +.. parsed-literal:: + + |qemu_system_x86| dos.img -device gus,irq=5 + +Or some other unclaimed IRQ. + +CS4231A is the chip used in Windows Sound System and GUSMAX products + +.. include:: cpu-models-x86.rst.inc + +.. _pcsys_005freq: + +OS requirements +~~~~~~~~~~~~~~~ + +On x86_64 hosts, the default set of CPU features enabled by the KVM +accelerator require the host to be running Linux v4.5 or newer. Red Hat +Enterprise Linux 7 is also supported, since the required +functionality was backported. diff --git a/docs/system/target-m68k.rst b/docs/system/target-m68k.rst new file mode 100644 index 0000000000..50b7dd9d63 --- /dev/null +++ b/docs/system/target-m68k.rst @@ -0,0 +1,32 @@ +.. _ColdFire-System-emulator: + +ColdFire System emulator +------------------------ + +Use the executable ``qemu-system-m68k`` to simulate a ColdFire machine. +The emulator is able to boot a uClinux kernel. + +The M5208EVB emulation includes the following devices: + +- MCF5208 ColdFire V2 Microprocessor (ISA A+ with EMAC). + +- Three Two on-chip UARTs. + +- Fast Ethernet Controller (FEC) + +The AN5206 emulation includes the following devices: + +- MCF5206 ColdFire V2 Microprocessor. + +- Two on-chip UARTs. + +The following options are specific to the ColdFire emulation: + +``-semihosting`` + Enable semihosting syscall emulation. + + On M68K this implements the \"ColdFire GDB\" interface used by + libgloss. + + Note that this allows guest direct access to the host filesystem, so + should only be used with trusted guest OS. diff --git a/docs/system/target-mips.rst b/docs/system/target-mips.rst new file mode 100644 index 0000000000..2736fd0509 --- /dev/null +++ b/docs/system/target-mips.rst @@ -0,0 +1,120 @@ +.. _MIPS-System-emulator: + +MIPS System emulator +-------------------- + +Four executables cover simulation of 32 and 64-bit MIPS systems in both +endian options, ``qemu-system-mips``, ``qemu-system-mipsel`` +``qemu-system-mips64`` and ``qemu-system-mips64el``. Five different +machine types are emulated: + +- A generic ISA PC-like machine \"mips\" + +- The MIPS Malta prototype board \"malta\" + +- An ACER Pica \"pica61\". This machine needs the 64-bit emulator. + +- MIPS emulator pseudo board \"mipssim\" + +- A MIPS Magnum R4000 machine \"magnum\". This machine needs the + 64-bit emulator. + +The generic emulation is supported by Debian 'Etch' and is able to +install Debian into a virtual disk image. The following devices are +emulated: + +- A range of MIPS CPUs, default is the 24Kf + +- PC style serial port + +- PC style IDE disk + +- NE2000 network card + +The Malta emulation supports the following devices: + +- Core board with MIPS 24Kf CPU and Galileo system controller + +- PIIX4 PCI/USB/SMbus controller + +- The Multi-I/O chip's serial device + +- PCI network cards (PCnet32 and others) + +- Malta FPGA serial device + +- Cirrus (default) or any other PCI VGA graphics card + +The Boston board emulation supports the following devices: + +- Xilinx FPGA, which includes a PCIe root port and an UART + +- Intel EG20T PCH connects the I/O peripherals, but only the SATA bus + is emulated + +The ACER Pica emulation supports: + +- MIPS R4000 CPU + +- PC-style IRQ and DMA controllers + +- PC Keyboard + +- IDE controller + +The MIPS Magnum R4000 emulation supports: + +- MIPS R4000 CPU + +- PC-style IRQ controller + +- PC Keyboard + +- SCSI controller + +- G364 framebuffer + +The Fulong 2E emulation supports: + +- Loongson 2E CPU + +- Bonito64 system controller as North Bridge + +- VT82C686 chipset as South Bridge + +- RTL8139D as a network card chipset + +The mipssim pseudo board emulation provides an environment similar to +what the proprietary MIPS emulator uses for running Linux. It supports: + +- A range of MIPS CPUs, default is the 24Kf + +- PC style serial port + +- MIPSnet network emulation + +.. include:: cpu-models-mips.rst.inc + +.. _nanoMIPS-System-emulator: + +nanoMIPS System emulator +~~~~~~~~~~~~~~~~~~~~~~~~ + +Executable ``qemu-system-mipsel`` also covers simulation of 32-bit +nanoMIPS system in little endian mode: + +- nanoMIPS I7200 CPU + +Example of ``qemu-system-mipsel`` usage for nanoMIPS is shown below: + +Download ```` from +https://mipsdistros.mips.com/LinuxDistro/nanomips/buildroot/index.html. + +Download ```` from +https://mipsdistros.mips.com/LinuxDistro/nanomips/kernels/v4.15.18-432-gb2eb9a8b07a1-20180627102142/index.html. + +Start system emulation of Malta board with nanoMIPS I7200 CPU:: + + qemu-system-mipsel -cpu I7200 -kernel \ + -M malta -serial stdio -m -hda \ + -append "mem=256m@0x0 rw console=ttyS0 vga=cirrus vesa=0x111 root=/dev/sda" diff --git a/docs/system/target-ppc.rst b/docs/system/target-ppc.rst new file mode 100644 index 0000000000..43fadf3c00 --- /dev/null +++ b/docs/system/target-ppc.rst @@ -0,0 +1,61 @@ +.. _PowerPC-System-emulator: + +PowerPC System emulator +----------------------- + +Use the executable ``qemu-system-ppc`` to simulate a complete 40P (PREP) +or PowerMac PowerPC system. + +QEMU emulates the following PowerMac peripherals: + +- UniNorth or Grackle PCI Bridge + +- PCI VGA compatible card with VESA Bochs Extensions + +- 2 PMAC IDE interfaces with hard disk and CD-ROM support + +- NE2000 PCI adapters + +- Non Volatile RAM + +- VIA-CUDA with ADB keyboard and mouse. + +QEMU emulates the following 40P (PREP) peripherals: + +- PCI Bridge + +- PCI VGA compatible card with VESA Bochs Extensions + +- 2 IDE interfaces with hard disk and CD-ROM support + +- Floppy disk + +- PCnet network adapters + +- Serial port + +- PREP Non Volatile RAM + +- PC compatible keyboard and mouse. + +Since version 0.9.1, QEMU uses OpenBIOS https://www.openbios.org/ for +the g3beige and mac99 PowerMac and the 40p machines. OpenBIOS is a free +(GPL v2) portable firmware implementation. The goal is to implement a +100% IEEE 1275-1994 (referred to as Open Firmware) compliant firmware. + +The following options are specific to the PowerPC emulation: + +``-g WxH[xDEPTH]`` + Set the initial VGA graphic mode. The default is 800x600x32. + +``-prom-env string`` + Set OpenBIOS variables in NVRAM, for example: + + :: + + qemu-system-ppc -prom-env 'auto-boot?=false' \ + -prom-env 'boot-device=hd:2,\yaboot' \ + -prom-env 'boot-args=conf=hd:2,\yaboot.conf' + +More information is available at +http://perso.magic.fr/l_indien/qemu-ppc/. diff --git a/docs/system/target-sparc.rst b/docs/system/target-sparc.rst new file mode 100644 index 0000000000..589c88d175 --- /dev/null +++ b/docs/system/target-sparc.rst @@ -0,0 +1,81 @@ +.. _Sparc32-System-emulator: + +Sparc32 System emulator +----------------------- + +Use the executable ``qemu-system-sparc`` to simulate the following Sun4m +architecture machines: + +- SPARCstation 4 + +- SPARCstation 5 + +- SPARCstation 10 + +- SPARCstation 20 + +- SPARCserver 600MP + +- SPARCstation LX + +- SPARCstation Voyager + +- SPARCclassic + +- SPARCbook + +The emulation is somewhat complete. SMP up to 16 CPUs is supported, but +Linux limits the number of usable CPUs to 4. + +QEMU emulates the following sun4m peripherals: + +- IOMMU + +- TCX or cgthree Frame buffer + +- Lance (Am7990) Ethernet + +- Non Volatile RAM M48T02/M48T08 + +- Slave I/O: timers, interrupt controllers, Zilog serial ports, + keyboard and power/reset logic + +- ESP SCSI controller with hard disk and CD-ROM support + +- Floppy drive (not on SS-600MP) + +- CS4231 sound device (only on SS-5, not working yet) + +The number of peripherals is fixed in the architecture. Maximum memory +size depends on the machine type, for SS-5 it is 256MB and for others +2047MB. + +Since version 0.8.2, QEMU uses OpenBIOS https://www.openbios.org/. +OpenBIOS is a free (GPL v2) portable firmware implementation. The goal +is to implement a 100% IEEE 1275-1994 (referred to as Open Firmware) +compliant firmware. + +A sample Linux 2.6 series kernel and ram disk image are available on the +QEMU web site. There are still issues with NetBSD and OpenBSD, but most +kernel versions work. Please note that currently older Solaris kernels +don't work probably due to interface issues between OpenBIOS and +Solaris. + +The following options are specific to the Sparc32 emulation: + +``-g WxHx[xDEPTH]`` + Set the initial graphics mode. For TCX, the default is 1024x768x8 + with the option of 1024x768x24. For cgthree, the default is + 1024x768x8 with the option of 1152x900x8 for people who wish to use + OBP. + +``-prom-env string`` + Set OpenBIOS variables in NVRAM, for example: + + :: + + qemu-system-sparc -prom-env 'auto-boot?=false' \ + -prom-env 'boot-device=sd(0,2,0):d' -prom-env 'boot-args=linux single' + +``-M [SS-4|SS-5|SS-10|SS-20|SS-600MP|LX|Voyager|SPARCClassic] [|SPARCbook]`` + Set the emulated machine type. Default is SS-5. diff --git a/docs/system/target-sparc64.rst b/docs/system/target-sparc64.rst new file mode 100644 index 0000000000..ca76ba9c48 --- /dev/null +++ b/docs/system/target-sparc64.rst @@ -0,0 +1,49 @@ +.. _Sparc64-System-emulator: + +Sparc64 System emulator +----------------------- + +Use the executable ``qemu-system-sparc64`` to simulate a Sun4u +(UltraSPARC PC-like machine), Sun4v (T1 PC-like machine), or generic +Niagara (T1) machine. The Sun4u emulator is mostly complete, being able +to run Linux, NetBSD and OpenBSD in headless (-nographic) mode. The +Sun4v emulator is still a work in progress. + +The Niagara T1 emulator makes use of firmware and OS binaries supplied +in the S10image/ directory of the OpenSPARC T1 project +http://download.oracle.com/technetwork/systems/opensparc/OpenSPARCT1_Arch.1.5.tar.bz2 +and is able to boot the disk.s10hw2 Solaris image. + +:: + + qemu-system-sparc64 -M niagara -L /path-to/S10image/ \ + -nographic -m 256 \ + -drive if=pflash,readonly=on,file=/S10image/disk.s10hw2 + +QEMU emulates the following peripherals: + +- UltraSparc IIi APB PCI Bridge + +- PCI VGA compatible card with VESA Bochs Extensions + +- PS/2 mouse and keyboard + +- Non Volatile RAM M48T59 + +- PC-compatible serial ports + +- 2 PCI IDE interfaces with hard disk and CD-ROM support + +- Floppy disk + +The following options are specific to the Sparc64 emulation: + +``-prom-env string`` + Set OpenBIOS variables in NVRAM, for example: + + :: + + qemu-system-sparc64 -prom-env 'auto-boot?=false' + +``-M [sun4u|sun4v|niagara]`` + Set the emulated machine type. The default is sun4u. diff --git a/docs/system/target-xtensa.rst b/docs/system/target-xtensa.rst new file mode 100644 index 0000000000..43cab8dc4d --- /dev/null +++ b/docs/system/target-xtensa.rst @@ -0,0 +1,39 @@ +.. _Xtensa-System-emulator: + +Xtensa System emulator +---------------------- + +Two executables cover simulation of both Xtensa endian options, +``qemu-system-xtensa`` and ``qemu-system-xtensaeb``. Two different +machine types are emulated: + +- Xtensa emulator pseudo board \"sim\" + +- Avnet LX60/LX110/LX200 board + +The sim pseudo board emulation provides an environment similar to one +provided by the proprietary Tensilica ISS. It supports: + +- A range of Xtensa CPUs, default is the DC232B + +- Console and filesystem access via semihosting calls + +The Avnet LX60/LX110/LX200 emulation supports: + +- A range of Xtensa CPUs, default is the DC232B + +- 16550 UART + +- OpenCores 10/100 Mbps Ethernet MAC + +The following options are specific to the Xtensa emulation: + +``-semihosting`` + Enable semihosting syscall emulation. + + Xtensa semihosting provides basic file IO calls, such as + open/read/write/seek/select. Tensilica baremetal libc for ISS and + linux platform \"sim\" use this interface. + + Note that this allows guest direct access to the host filesystem, so + should only be used with trusted guest OS. diff --git a/docs/system/targets.rst b/docs/system/targets.rst new file mode 100644 index 0000000000..eba3111247 --- /dev/null +++ b/docs/system/targets.rst @@ -0,0 +1,19 @@ +QEMU System Emulator Targets +============================ + +QEMU is a generic emulator and it emulates many machines. Most of the +options are similar for all machines. Specific information about the +various targets are mentioned in the following sections. + +Contents: + +.. toctree:: + + target-i386 + target-ppc + target-sparc + target-sparc64 + target-mips + target-arm + target-m68k + target-xtensa diff --git a/docs/system/tls.rst b/docs/system/tls.rst new file mode 100644 index 0000000000..dc2b94257f --- /dev/null +++ b/docs/system/tls.rst @@ -0,0 +1,328 @@ +.. _network_005ftls: + +TLS setup for network services +------------------------------ + +Almost all network services in QEMU have the ability to use TLS for +session data encryption, along with x509 certificates for simple client +authentication. What follows is a description of how to generate +certificates suitable for usage with QEMU, and applies to the VNC +server, character devices with the TCP backend, NBD server and client, +and migration server and client. + +At a high level, QEMU requires certificates and private keys to be +provided in PEM format. Aside from the core fields, the certificates +should include various extension data sets, including v3 basic +constraints data, key purpose, key usage and subject alt name. + +The GnuTLS package includes a command called ``certtool`` which can be +used to easily generate certificates and keys in the required format +with expected data present. Alternatively a certificate management +service may be used. + +At a minimum it is necessary to setup a certificate authority, and issue +certificates to each server. If using x509 certificates for +authentication, then each client will also need to be issued a +certificate. + +Assuming that the QEMU network services will only ever be exposed to +clients on a private intranet, there is no need to use a commercial +certificate authority to create certificates. A self-signed CA is +sufficient, and in fact likely to be more secure since it removes the +ability of malicious 3rd parties to trick the CA into mis-issuing certs +for impersonating your services. The only likely exception where a +commercial CA might be desirable is if enabling the VNC websockets +server and exposing it directly to remote browser clients. In such a +case it might be useful to use a commercial CA to avoid needing to +install custom CA certs in the web browsers. + +The recommendation is for the server to keep its certificates in either +``/etc/pki/qemu`` or for unprivileged users in ``$HOME/.pki/qemu``. + +.. _tls_005fgenerate_005fca: + +Setup the Certificate Authority +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +This step only needs to be performed once per organization / +organizational unit. First the CA needs a private key. This key must be +kept VERY secret and secure. If this key is compromised the entire trust +chain of the certificates issued with it is lost. + +:: + + # certtool --generate-privkey > ca-key.pem + +To generate a self-signed certificate requires one core piece of +information, the name of the organization. A template file ``ca.info`` +should be populated with the desired data to avoid having to deal with +interactive prompts from certtool:: + + # cat > ca.info < server-hostNNN.info < server-hostNNN-key.pem + # certtool --generate-certificate \ + --load-ca-certificate ca-cert.pem \ + --load-ca-privkey ca-key.pem \ + --load-privkey server-hostNNN-key.pem \ + --template server-hostNNN.info \ + --outfile server-hostNNN-cert.pem + +The ``dns_name`` and ``ip_address`` fields in the template are setting +the subject alt name extension data. The ``tls_www_server`` keyword is +the key purpose extension to indicate this certificate is intended for +usage in a web server. Although QEMU network services are not in fact +HTTP servers (except for VNC websockets), setting this key purpose is +still recommended. The ``encryption_key`` and ``signing_key`` keyword is +the key usage extension to indicate this certificate is intended for +usage in the data session. + +The ``server-hostNNN-key.pem`` and ``server-hostNNN-cert.pem`` files +should now be securely copied to the server for which they were +generated, and renamed to ``server-key.pem`` and ``server-cert.pem`` +when added to the ``/etc/pki/qemu`` directory on the target host. The +``server-key.pem`` file is security sensitive and should be kept +protected with file mode 0600 to prevent disclosure. + +.. _tls_005fgenerate_005fclient: + +Issuing client certificates +~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +The QEMU x509 TLS credential setup defaults to enabling client +verification using certificates, providing a simple authentication +mechanism. If this default is used, each client also needs to be issued +a certificate. The client certificate contains enough metadata to +uniquely identify the client with the scope of the certificate +authority. The client certificate would typically include fields for +organization, state, city, building, etc. + +Once again on the host holding the CA, create template files containing +the information for each client, and use it to issue client +certificates. + +:: + + # cat > client-hostNNN.info < client-hostNNN-key.pem + # certtool --generate-certificate \ + --load-ca-certificate ca-cert.pem \ + --load-ca-privkey ca-key.pem \ + --load-privkey client-hostNNN-key.pem \ + --template client-hostNNN.info \ + --outfile client-hostNNN-cert.pem + +The subject alt name extension data is not required for clients, so the +the ``dns_name`` and ``ip_address`` fields are not included. The +``tls_www_client`` keyword is the key purpose extension to indicate this +certificate is intended for usage in a web client. Although QEMU network +clients are not in fact HTTP clients, setting this key purpose is still +recommended. The ``encryption_key`` and ``signing_key`` keyword is the +key usage extension to indicate this certificate is intended for usage +in the data session. + +The ``client-hostNNN-key.pem`` and ``client-hostNNN-cert.pem`` files +should now be securely copied to the client for which they were +generated, and renamed to ``client-key.pem`` and ``client-cert.pem`` +when added to the ``/etc/pki/qemu`` directory on the target host. The +``client-key.pem`` file is security sensitive and should be kept +protected with file mode 0600 to prevent disclosure. + +If a single host is going to be using TLS in both a client and server +role, it is possible to create a single certificate to cover both roles. +This would be quite common for the migration and NBD services, where a +QEMU process will be started by accepting a TLS protected incoming +migration, and later itself be migrated out to another host. To generate +a single certificate, simply include the template data from both the +client and server instructions in one. + +:: + + # cat > both-hostNNN.info < both-hostNNN-key.pem + # certtool --generate-certificate \ + --load-ca-certificate ca-cert.pem \ + --load-ca-privkey ca-key.pem \ + --load-privkey both-hostNNN-key.pem \ + --template both-hostNNN.info \ + --outfile both-hostNNN-cert.pem + +When copying the PEM files to the target host, save them twice, once as +``server-cert.pem`` and ``server-key.pem``, and again as +``client-cert.pem`` and ``client-key.pem``. + +.. _tls_005fcreds_005fsetup: + +TLS x509 credential configuration +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +QEMU has a standard mechanism for loading x509 credentials that will be +used for network services and clients. It requires specifying the +``tls-creds-x509`` class name to the ``--object`` command line argument +for the system emulators. Each set of credentials loaded should be given +a unique string identifier via the ``id`` parameter. A single set of TLS +credentials can be used for multiple network backends, so VNC, +migration, NBD, character devices can all share the same credentials. +Note, however, that credentials for use in a client endpoint must be +loaded separately from those used in a server endpoint. + +When specifying the object, the ``dir`` parameters specifies which +directory contains the credential files. This directory is expected to +contain files with the names mentioned previously, ``ca-cert.pem``, +``server-key.pem``, ``server-cert.pem``, ``client-key.pem`` and +``client-cert.pem`` as appropriate. It is also possible to include a set +of pre-generated Diffie-Hellman (DH) parameters in a file +``dh-params.pem``, which can be created using the +``certtool --generate-dh-params`` command. If omitted, QEMU will +dynamically generate DH parameters when loading the credentials. + +The ``endpoint`` parameter indicates whether the credentials will be +used for a network client or server, and determines which PEM files are +loaded. + +The ``verify`` parameter determines whether x509 certificate validation +should be performed. This defaults to enabled, meaning clients will +always validate the server hostname against the certificate subject alt +name fields and/or CN field. It also means that servers will request +that clients provide a certificate and validate them. Verification +should never be turned off for client endpoints, however, it may be +turned off for server endpoints if an alternative mechanism is used to +authenticate clients. For example, the VNC server can use SASL to +authenticate clients instead. + +To load server credentials with client certificate validation enabled + +.. parsed-literal:: + + |qemu_system| -object tls-creds-x509,id=tls0,dir=/etc/pki/qemu,endpoint=server + +while to load client credentials use + +.. parsed-literal:: + + |qemu_system| -object tls-creds-x509,id=tls0,dir=/etc/pki/qemu,endpoint=client + +Network services which support TLS will all have a ``tls-creds`` +parameter which expects the ID of the TLS credentials object. For +example with VNC: + +.. parsed-literal:: + + |qemu_system| -vnc 0.0.0.0:0,tls-creds=tls0 + +.. _tls_005fpsk: + +TLS Pre-Shared Keys (PSK) +~~~~~~~~~~~~~~~~~~~~~~~~~ + +Instead of using certificates, you may also use TLS Pre-Shared Keys +(TLS-PSK). This can be simpler to set up than certificates but is less +scalable. + +Use the GnuTLS ``psktool`` program to generate a ``keys.psk`` file +containing one or more usernames and random keys:: + + mkdir -m 0700 /tmp/keys + psktool -u rich -p /tmp/keys/keys.psk + +TLS-enabled servers such as qemu-nbd can use this directory like so:: + + qemu-nbd \ + -t -x / \ + --object tls-creds-psk,id=tls0,endpoint=server,dir=/tmp/keys \ + --tls-creds tls0 \ + image.qcow2 + +When connecting from a qemu-based client you must specify the directory +containing ``keys.psk`` and an optional username (defaults to "qemu"):: + + qemu-img info \ + --object tls-creds-psk,id=tls0,dir=/tmp/keys,username=rich,endpoint=client \ + --image-opts \ + file.driver=nbd,file.host=localhost,file.port=10809,file.tls-creds=tls0,file.export=/ diff --git a/docs/system/usb.rst b/docs/system/usb.rst new file mode 100644 index 0000000000..ddfa828d74 --- /dev/null +++ b/docs/system/usb.rst @@ -0,0 +1,137 @@ +.. _pcsys_005fusb: + +USB emulation +------------- + +QEMU can emulate a PCI UHCI, OHCI, EHCI or XHCI USB controller. You can +plug virtual USB devices or real host USB devices (only works with +certain host operating systems). QEMU will automatically create and +connect virtual USB hubs as necessary to connect multiple USB devices. + +.. _usb_005fdevices: + +Connecting USB devices +~~~~~~~~~~~~~~~~~~~~~~ + +USB devices can be connected with the ``-device usb-...`` command line +option or the ``device_add`` monitor command. Available devices are: + +``usb-mouse`` + Virtual Mouse. This will override the PS/2 mouse emulation when + activated. + +``usb-tablet`` + Pointer device that uses absolute coordinates (like a touchscreen). + This means QEMU is able to report the mouse position without having + to grab the mouse. Also overrides the PS/2 mouse emulation when + activated. + +``usb-storage,drive=drive_id`` + Mass storage device backed by drive_id (see + :ref:`disk_005fimages`) + +``usb-uas`` + USB attached SCSI device, see + `usb-storage.txt `__ + for details + +``usb-bot`` + Bulk-only transport storage device, see + `usb-storage.txt `__ + for details here, too + +``usb-mtp,rootdir=dir`` + Media transfer protocol device, using dir as root of the file tree + that is presented to the guest. + +``usb-host,hostbus=bus,hostaddr=addr`` + Pass through the host device identified by bus and addr + +``usb-host,vendorid=vendor,productid=product`` + Pass through the host device identified by vendor and product ID + +``usb-wacom-tablet`` + Virtual Wacom PenPartner tablet. This device is similar to the + ``tablet`` above but it can be used with the tslib library because in + addition to touch coordinates it reports touch pressure. + +``usb-kbd`` + Standard USB keyboard. Will override the PS/2 keyboard (if present). + +``usb-serial,chardev=id`` + Serial converter. This emulates an FTDI FT232BM chip connected to + host character device id. + +``usb-braille,chardev=id`` + Braille device. This will use BrlAPI to display the braille output on + a real or fake device referenced by id. + +``usb-net[,netdev=id]`` + Network adapter that supports CDC ethernet and RNDIS protocols. id + specifies a netdev defined with ``-netdev …,id=id``. For instance, + user-mode networking can be used with + + .. parsed-literal:: + + |qemu_system| [...] -netdev user,id=net0 -device usb-net,netdev=net0 + +``usb-ccid`` + Smartcard reader device + +``usb-audio`` + USB audio device + +.. _host_005fusb_005fdevices: + +Using host USB devices on a Linux host +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +WARNING: this is an experimental feature. QEMU will slow down when using +it. USB devices requiring real time streaming (i.e. USB Video Cameras) +are not supported yet. + +1. If you use an early Linux 2.4 kernel, verify that no Linux driver is + actually using the USB device. A simple way to do that is simply to + disable the corresponding kernel module by renaming it from + ``mydriver.o`` to ``mydriver.o.disabled``. + +2. Verify that ``/proc/bus/usb`` is working (most Linux distributions + should enable it by default). You should see something like that: + + :: + + ls /proc/bus/usb + 001 devices drivers + +3. Since only root can access to the USB devices directly, you can + either launch QEMU as root or change the permissions of the USB + devices you want to use. For testing, the following suffices: + + :: + + chown -R myuid /proc/bus/usb + +4. Launch QEMU and do in the monitor: + + :: + + info usbhost + Device 1.2, speed 480 Mb/s + Class 00: USB device 1234:5678, USB DISK + + You should see the list of the devices you can use (Never try to use + hubs, it won't work). + +5. Add the device in QEMU by using: + + :: + + device_add usb-host,vendorid=0x1234,productid=0x5678 + + Normally the guest OS should report that a new USB device is plugged. + You can use the option ``-device usb-host,...`` to do the same. + +6. Now you can try to use the host USB device in QEMU. + +When relaunching QEMU, you may have to unplug and plug again the USB +device to make it work again (this is a bug). diff --git a/docs/system/vnc-security.rst b/docs/system/vnc-security.rst new file mode 100644 index 0000000000..b237b07330 --- /dev/null +++ b/docs/system/vnc-security.rst @@ -0,0 +1,202 @@ +.. _vnc_005fsecurity: + +VNC security +------------ + +The VNC server capability provides access to the graphical console of +the guest VM across the network. This has a number of security +considerations depending on the deployment scenarios. + +.. _vnc_005fsec_005fnone: + +Without passwords +~~~~~~~~~~~~~~~~~ + +The simplest VNC server setup does not include any form of +authentication. For this setup it is recommended to restrict it to +listen on a UNIX domain socket only. For example + +.. parsed-literal:: + + |qemu_system| [...OPTIONS...] -vnc unix:/home/joebloggs/.qemu-myvm-vnc + +This ensures that only users on local box with read/write access to that +path can access the VNC server. To securely access the VNC server from a +remote machine, a combination of netcat+ssh can be used to provide a +secure tunnel. + +.. _vnc_005fsec_005fpassword: + +With passwords +~~~~~~~~~~~~~~ + +The VNC protocol has limited support for password based authentication. +Since the protocol limits passwords to 8 characters it should not be +considered to provide high security. The password can be fairly easily +brute-forced by a client making repeat connections. For this reason, a +VNC server using password authentication should be restricted to only +listen on the loopback interface or UNIX domain sockets. Password +authentication is not supported when operating in FIPS 140-2 compliance +mode as it requires the use of the DES cipher. Password authentication +is requested with the ``password`` option, and then once QEMU is running +the password is set with the monitor. Until the monitor is used to set +the password all clients will be rejected. + +.. parsed-literal:: + + |qemu_system| [...OPTIONS...] -vnc :1,password -monitor stdio + (qemu) change vnc password + Password: ******** + (qemu) + +.. _vnc_005fsec_005fcertificate: + +With x509 certificates +~~~~~~~~~~~~~~~~~~~~~~ + +The QEMU VNC server also implements the VeNCrypt extension allowing use +of TLS for encryption of the session, and x509 certificates for +authentication. The use of x509 certificates is strongly recommended, +because TLS on its own is susceptible to man-in-the-middle attacks. +Basic x509 certificate support provides a secure session, but no +authentication. This allows any client to connect, and provides an +encrypted session. + +.. parsed-literal:: + + |qemu_system| [...OPTIONS...] \ + -object tls-creds-x509,id=tls0,dir=/etc/pki/qemu,endpoint=server,verify-peer=no \ + -vnc :1,tls-creds=tls0 -monitor stdio + +In the above example ``/etc/pki/qemu`` should contain at least three +files, ``ca-cert.pem``, ``server-cert.pem`` and ``server-key.pem``. +Unprivileged users will want to use a private directory, for example +``$HOME/.pki/qemu``. NB the ``server-key.pem`` file should be protected +with file mode 0600 to only be readable by the user owning it. + +.. _vnc_005fsec_005fcertificate_005fverify: + +With x509 certificates and client verification +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Certificates can also provide a means to authenticate the client +connecting. The server will request that the client provide a +certificate, which it will then validate against the CA certificate. +This is a good choice if deploying in an environment with a private +internal certificate authority. It uses the same syntax as previously, +but with ``verify-peer`` set to ``yes`` instead. + +.. parsed-literal:: + + |qemu_system| [...OPTIONS...] \ + -object tls-creds-x509,id=tls0,dir=/etc/pki/qemu,endpoint=server,verify-peer=yes \ + -vnc :1,tls-creds=tls0 -monitor stdio + +.. _vnc_005fsec_005fcertificate_005fpw: + +With x509 certificates, client verification and passwords +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Finally, the previous method can be combined with VNC password +authentication to provide two layers of authentication for clients. + +.. parsed-literal:: + + |qemu_system| [...OPTIONS...] \ + -object tls-creds-x509,id=tls0,dir=/etc/pki/qemu,endpoint=server,verify-peer=yes \ + -vnc :1,tls-creds=tls0,password -monitor stdio + (qemu) change vnc password + Password: ******** + (qemu) + +.. _vnc_005fsec_005fsasl: + +With SASL authentication +~~~~~~~~~~~~~~~~~~~~~~~~ + +The SASL authentication method is a VNC extension, that provides an +easily extendable, pluggable authentication method. This allows for +integration with a wide range of authentication mechanisms, such as PAM, +GSSAPI/Kerberos, LDAP, SQL databases, one-time keys and more. The +strength of the authentication depends on the exact mechanism +configured. If the chosen mechanism also provides a SSF layer, then it +will encrypt the datastream as well. + +Refer to the later docs on how to choose the exact SASL mechanism used +for authentication, but assuming use of one supporting SSF, then QEMU +can be launched with: + +.. parsed-literal:: + + |qemu_system| [...OPTIONS...] -vnc :1,sasl -monitor stdio + +.. _vnc_005fsec_005fcertificate_005fsasl: + +With x509 certificates and SASL authentication +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +If the desired SASL authentication mechanism does not supported SSF +layers, then it is strongly advised to run it in combination with TLS +and x509 certificates. This provides securely encrypted data stream, +avoiding risk of compromising of the security credentials. This can be +enabled, by combining the 'sasl' option with the aforementioned TLS + +x509 options: + +.. parsed-literal:: + + |qemu_system| [...OPTIONS...] \ + -object tls-creds-x509,id=tls0,dir=/etc/pki/qemu,endpoint=server,verify-peer=yes \ + -vnc :1,tls-creds=tls0,sasl -monitor stdio + +.. _vnc_005fsetup_005fsasl: + +Configuring SASL mechanisms +~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +The following documentation assumes use of the Cyrus SASL implementation +on a Linux host, but the principles should apply to any other SASL +implementation or host. When SASL is enabled, the mechanism +configuration will be loaded from system default SASL service config +/etc/sasl2/qemu.conf. If running QEMU as an unprivileged user, an +environment variable SASL_CONF_PATH can be used to make it search +alternate locations for the service config file. + +If the TLS option is enabled for VNC, then it will provide session +encryption, otherwise the SASL mechanism will have to provide +encryption. In the latter case the list of possible plugins that can be +used is drastically reduced. In fact only the GSSAPI SASL mechanism +provides an acceptable level of security by modern standards. Previous +versions of QEMU referred to the DIGEST-MD5 mechanism, however, it has +multiple serious flaws described in detail in RFC 6331 and thus should +never be used any more. The SCRAM-SHA-1 mechanism provides a simple +username/password auth facility similar to DIGEST-MD5, but does not +support session encryption, so can only be used in combination with TLS. + +When not using TLS the recommended configuration is + +:: + + mech_list: gssapi + keytab: /etc/qemu/krb5.tab + +This says to use the 'GSSAPI' mechanism with the Kerberos v5 protocol, +with the server principal stored in /etc/qemu/krb5.tab. For this to work +the administrator of your KDC must generate a Kerberos principal for the +server, with a name of 'qemu/somehost.example.com@EXAMPLE.COM' replacing +'somehost.example.com' with the fully qualified host name of the machine +running QEMU, and 'EXAMPLE.COM' with the Kerberos Realm. + +When using TLS, if username+password authentication is desired, then a +reasonable configuration is + +:: + + mech_list: scram-sha-1 + sasldb_path: /etc/qemu/passwd.db + +The ``saslpasswd2`` program can be used to populate the ``passwd.db`` +file with accounts. + +Other SASL configurations will be left as an exercise for the reader. +Note that all mechanisms, except GSSAPI, should be combined with use of +TLS to ensure a secure data channel. -- cgit v1.2.3