aboutsummaryrefslogtreecommitdiff
path: root/tcg
AgeCommit message (Collapse)Author
2016-04-21tcg: check for CONFIG_DEBUG_TCG instead of NDEBUGAurelien Jarno
Check for CONFIG_DEBUG_TCG instead of NDEBUG, drop now useless code. Cc: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Message-id: 1461228530-14852-2-git-send-email-aurelien@aurel32.net Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-04-21tcg: use tcg_debug_assert instead of assert (fix performance regression)Aurelien Jarno
The TCG code is quite performance sensitive, but at the same time can also be quite tricky. That is why asserts that can be enabled with the --enable-debug-tcg configure option. This used to work the following way: | #include "config.h" | | ... | | #if !defined(CONFIG_DEBUG_TCG) && !defined(NDEBUG) | /* define it to suppress various consistency checks (faster) */ | #define NDEBUG | #endif | | ... | | #include <assert.h> Since commit 757e725b (tcg: Clean up includes) "config.h" as been replaced by "qemu/osdep.h" which itself includes <assert.h>. As a consequence the assertions are always enabled, even when using --disable-debug-tcg, causing a performance regression, especially on targets with many registers. For instance on qemu-system-ppc the speed difference is about 15%. tcg_debug_assert is controlled directly by CONFIG_DEBUG_TCG and already uses in some places. This patch replaces all the calls to assert into calss to tcg_debug_assert. Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Message-id: 1461228530-14852-1-git-send-email-aurelien@aurel32.net Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-04-05tcg/mips: Fix type of tcg_target_reg_alloc_order[]James Hogan
The MIPS TCG backend is the only one to have tcg_target_reg_alloc_order[] elements of type TCGReg rather than int. This resulted in commit 91478cefaaf2 ("tcg: Allocate indirect_base temporaries in a different order") breaking the build on MIPS since the type differed from indirect_reg_alloc_order[]: tcg/tcg.c:1725:44: error: pointer type mismatch in conditional expression [-Werror] order = rev ? indirect_reg_alloc_order : tcg_target_reg_alloc_order; ^ Make it an array of ints to fix the build and match other architectures. Fixes: 91478cefaaf2 ("tcg: Allocate indirect_base temporaries in a different order") Signed-off-by: James Hogan <james.hogan@imgtec.com> Acked-by: Aurelien Jarno <aurelien@aurel32.net> Message-Id: <1459522179-6584-1-git-send-email-james.hogan@imgtec.com> Signed-off-by: Richard Henderson <rth@twiddle.net>
2016-03-22qemu-log: dfilter-ise exec, out_asm, op and opt_opAlex Bennée
This ensures the code generation debug code will honour -dfilter if set. For the "exec" tracing I've added a new inline macro for efficiency's sake. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Aurelien Jarno <aurelien@aureL32.net> Reviewed-by: Richard Henderson <rth@twiddle.net> Message-Id: <1458052224-9316-8-git-send-email-alex.bennee@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-22tcg: pass down TranslationBlock to tcg_code_genAlex Bennée
My later debugging patches need access to the origin PC which is held in the TranslationBlock structure. Pass down the whole structure as it also holds the information about the code start point. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net> Message-Id: <1458052224-9316-3-git-send-email-alex.bennee@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-22util: move declarations out of qemu-common.hVeronia Bahaa
Move declarations out of qemu-common.h for functions declared in utils/ files: e.g. include/qemu/path.h for utils/path.c. Move inline functions out of qemu-common.h and into new files (e.g. include/qemu/bcd.h) Signed-off-by: Veronia Bahaa <veroniabahaa@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-01tcg: Move definition of type TCGvLluís Vilanova
The target-dependant type TCGv must be defined in "tcg/tcg.h" before including the tracing helper wrappers in "tcg/tcg-op.h". It also makes more sense to define it here, where other TCG types are defined too. Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu> Message-id: 145641860129.30295.17554707227384022653.stgit@localhost Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-03-01tcg: Add type for vCPU pointersLluís Vilanova
Adds the 'TCGv_env' type for pointers to 'CPUArchState' objects. The tracing infrastructure later needs to differentiate between regular pointers and pointers to vCPUs. Also changes all targets to use the new 'TCGv_env' type instead of the generic 'TCGv_ptr'. As of now, the change is merely cosmetic ('TCGv_env' translates into 'TCGv_ptr'), but that could change in the future to enforce the difference. Note that a 'TCGv_env' type (for 'CPUState') is not added, since all helpers currently receive the architecture-specific pointer ('CPUArchState'). Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu> Acked-by: Richard Henderson <rth@twiddle.net> Message-id: 145641859552.30295.7821536833590725201.stgit@localhost Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-02-23tcg: Remove unnecessary osdep.h includes from tcg-target.inc.cPeter Maydell
Commit 757e725b58c57d added a number of #include "qemu/osdep.h" files to the tcg-target.c files (as they were named at the time). These are unnecessary because these files are not standalone C files, and the tcg/tcg.c file which includes them will have already included osdep.h on their behalf. Remove the unneeded include directives. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <1456238983-10160-4-git-send-email-peter.maydell@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2016-02-23tcg: Rename tcg-target.c to tcg-target.inc.cPeter Maydell
Rename the per-architecture tcg-target.c files to tcg-target.inc.c. This makes it clearer that they are not intended to be standalone C files, but are instead #included into another source file. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <1456238983-10160-2-git-send-email-peter.maydell@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2016-02-23tcg: Allocate indirect_base temporaries in a different orderRichard Henderson
Since we've not got liveness analysis for indirect bases, placing them at the end of the call-saved registers makes it more likely that it'll stay live. Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: Richard Henderson <rth@twiddle.net>
2016-02-23tcg: Implement indirect memory registersRichard Henderson
That is, global_mem registers whose base is another global_mem register, rather than a fixed register. Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: Richard Henderson <rth@twiddle.net>
2016-02-23tcg: Work around clang bug wrt enum ranges, part 2Richard Henderson
A previous patch patch changed the type of REG from int to enum TCGReg, which provokes the following bug in clang: https://llvm.org/bugs/show_bug.cgi?id=16154 Signed-off-by: Richard Henderson <rth@twiddle.net>
2016-02-23all: Clean up includesPeter Maydell
Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Eric Blake <eblake@redhat.com>
2016-02-09tcg: Introduce temp_loadRichard Henderson
Unify all of the places that realize a temporary into a register. Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2016-02-09tcg: Change temp_save argument to TCGTempRichard Henderson
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2016-02-09tcg: Change temp_sync argument to TCGTempRichard Henderson
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2016-02-09tcg: Change temp_dead argument to TCGTempRichard Henderson
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2016-02-09tcg: Change reg_to_temp to TCGTemp pointerRichard Henderson
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2016-02-09tcg: Remove tcg_get_arg_str_i32/64Richard Henderson
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2016-02-09tcg: More use of TCGReg where appropriateRichard Henderson
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2016-02-09tcg: Work around clang bug wrt enum rangesRichard Henderson
A subsequent patch patch will change the type of REG from int to enum TCGReg, which provokes the following bug in clang: https://llvm.org/bugs/show_bug.cgi?id=16154 Signed-off-by: Richard Henderson <rth@twiddle.net>
2016-02-09tcg: Tidy temporary allocationRichard Henderson
In particular, make sure the memory is memset before use. Continues the increased use of TCGTemp pointers instead of integer indices where appropriate. Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2016-02-09tcg: Change ts->mem_reg to ts->mem_baseRichard Henderson
Chain the temporaries together via pointers intstead of indices. The mem_reg value is now mem_base->reg. This will be important later. This does require that the frame pointer have a global temporary allocated for it. This is simple bar the existing reserved_regs check. Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2016-02-09tcg: Change tcg_global_mem_new_* to take a TCGv_ptrRichard Henderson
Thus, use cpu_env as the parameter, not TCG_AREG0 directly. Update all uses in the translators. Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2016-02-09tcg: Remove lingering references to gen_opc_bufRichard Henderson
Three in comments and one in code in the stub tcg_liveness_analysis. Signed-off-by: Richard Henderson <rth@twiddle.net>
2016-02-09tcg: Respect highwater in tcg_out_tb_finalizeRichard Henderson
Undo the workaround at b17a6d3390f87620735f7efb03bb1c96682ff449. If there are lots of memory operations in a TB, the slow path code can exceed the highwater reservation. Add a check within the loop. Tested-by: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2016-02-03log: do not unnecessarily include qom/cpu.hPaolo Bonzini
Split the bits that require it to exec/log.h. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Denis V. Lunev <den@openvz.org> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Message-id: 1452174932-28657-8-git-send-email-den@openvz.org Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-01-29tcg: Clean up includesPeter Maydell
Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1453832250-766-16-git-send-email-peter.maydell@linaro.org
2015-12-01tcg: Increase the highwater reservationRichard Henderson
If there are a lot of guest memory ops in the TB, the amount of code generated by tcg_out_tb_finalize could be well more than 1k. In the short term, increase the reservation larger than any TB seen in practice. Reported-by: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Tested-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-11-23tcg: Fix highwater checkJohn Clarke
A simple typo in the variable to use when comparing vs the highwater mark. Reports are that qemu can in fact segfault occasionally due to this mistake. Signed-off-by: John Clarke <johnc@kirriwa.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-10-19tcg/mips: Support r6 SEL{NE, EQ}Z instead of MOVN/MOVZJames Hogan
Extend MIPS movcond implementation to support the SELNEZ/SELEQZ instructions introduced in MIPS r6 (where MOVN/MOVZ have been removed). Whereas the "MOVN/MOVZ rd, rs, rt" instructions have the following semantics: rd = [!]rt ? rs : rd The "SELNEZ/SELEQZ rd, rs, rt" instructions are slightly different: rd = [!]rt ? rs : 0 First we ensure that if one of the movcond input values is zero that it comes last (we can swap the input arguments if we invert the condition). This is so that it can exactly match one of the SELNEZ/SELEQZ instructions and avoid the need to emit the other one. Otherwise we emit the opposite instruction first into a temporary register, and OR that into the result: SELNEZ/SELEQZ TMP1, v2, c1 SELEQZ/SELNEZ ret, v1, c1 OR ret, ret, TMP1 Which does the following: ret = cond ? v1 : v2 Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: James Hogan <james.hogan@imgtec.com> Signed-off-by: Richard Henderson <rth@twiddle.net> Message-Id: <1443788657-14537-7-git-send-email-james.hogan@imgtec.com>
2015-10-19tcg/mips: Support r6 multiply/divide encodingsJames Hogan
MIPSr6 adds several new integer multiply, divide, and modulo instructions, and removes several pre-r6 encodings, along with the HI/LO registers which were the implicit operands of some of those instructions. Update TCG to use the new instructions when built for r6. The new instructions actually map much more directly to the TCG ops, as they only provide a single 32-bit half of the result and in a normal general purpose register instead of HI or LO. The mulu2_i32 and muls2_i32 operations are no longer appropriate for r6, so they are removed from the TCG opcode table. This is because they would need to emit two separate host instructions anyway (for the high and low half of the result), which TCG can arrange automatically for us in the absense of mulu2_i32/muls2_i32 by splitting it into mul_i32 and mul*h_i32 TCG ops. Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: James Hogan <james.hogan@imgtec.com> Signed-off-by: Richard Henderson <rth@twiddle.net> Message-Id: <1443788657-14537-6-git-send-email-james.hogan@imgtec.com>
2015-10-19tcg/mips: Support r6 JR encodingJames Hogan
MIPSr6 encodes JR as JALR with zero as the link register, and the pre-r6 JR encoding is removed. Update TCG to use the new encoding when built for r6. We still use the old encoding for pre-r6, so as not to confuse return prediction stack hardware which may detect only particular encodings of the return instruction. Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: James Hogan <james.hogan@imgtec.com> Signed-off-by: Richard Henderson <rth@twiddle.net> Message-Id: <1443788657-14537-5-git-send-email-james.hogan@imgtec.com>
2015-10-19tcg/mips: Add use_mips32r6_instructions definitionJames Hogan
Add definition use_mips32r6_instructions to the MIPS TCG backend which is constant 1 when built for MIPS release 6. This will be used to decide between pre-R6 and R6 instruction encodings. Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: James Hogan <james.hogan@imgtec.com> Signed-off-by: Richard Henderson <rth@twiddle.net> Message-Id: <1443788657-14537-4-git-send-email-james.hogan@imgtec.com>
2015-10-19tcg-opc.h: Simplify insn_start defJames Hogan
We already have a TLADDR_ARGS definition, so rearrange the order slightly and use it in the definition of insn_start, instead of having an #ifdef. Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: James Hogan <james.hogan@imgtec.com> Signed-off-by: Richard Henderson <rth@twiddle.net> Message-Id: <1443788657-14537-2-git-send-email-james.hogan@imgtec.com>
2015-10-19tcg/ppc: Prefer mask over andi.Richard Henderson
Prefer the instruction that isn't required to modify cr0. Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-10-19tcg/ppc: Revise goto_tb implementationRichard Henderson
Restrict the size of code_gen_buffer to 2GB on ppc64, which lets us assert that everything is reachable with addis+addi from tb_ret_addr. This lets us use a max of 4 insns for goto_tb instead of 7. Emit the indirect branch portion of goto_tb up front, which means we only have to update two insns to update any link. With a 64-bit store, we can update the link atomically, which may be required in future. Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-10-19tcg/ppc: Adjust exit_tb for change in prologue placementRichard Henderson
Changing the prologue to the beginning of the code_gen_buffer changes the direction of the "return" branch. Need to change the logic to match. Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-10-07tcg: Check for overflow via highwater markRichard Henderson
We currently pre-compute an worst case code size for any TB, which works out to be 122kB. Since the average TB size is near 1kB, this wastes quite a lot of storage. Instead, check for overflow in between generating code for each opcode. The overhead of the check isn't measurable and wastage is minimized. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-10-07tcg: Emit prologue to the beginning of code_gen_bufferRichard Henderson
By putting the prologue at the end, we risk overwriting the prologue should our estimate of maximum TB size. Given the two different placements of the call to tcg_prologue_init, move the high water mark computation into tcg_prologue_init. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-10-07tcg: Remove tcg_gen_code_search_pcRichard Henderson
It's no longer used, so tidy up everything reached by it. Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-10-07tcg: Remove gen_intermediate_code_pcRichard Henderson
It is no longer used, so tidy up everything reached by it. This includes the gen_opc_* arrays, the search_pc parameter and the inline gen_intermediate_code_internal functions. Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-10-07tcg: Save insn data and use it in cpu_restore_state_from_tbRichard Henderson
We can now restore state without retranslation. Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-10-07tcg: Pass data argument to restore_state_to_opcRichard Henderson
The gen_opc_* arrays are already redundant with the data stored in the insn_start arguments. Transition restore_state_to_opc to use data from the latter. Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-10-07tcg: Add TCG_MAX_INSNSRichard Henderson
Adjust all translators to respect it. Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-10-07tcg: Allow extra data to be attached to insn_startRichard Henderson
With an eye toward having this data replace the gen_opc_* arrays that each target collects in order to enable restore_state_from_tb. Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-10-07tcg: Rename debug_insn_start to insn_startRichard Henderson
With an eye toward making it mandatory. Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-09-19tcg/mips: pass oi to tcg_out_tlb_loadAurelien Jarno
Instead of computing mem_index and s_bits in both tcg_out_qemu_ld and tcg_out_qemu_st function and passing them to tcg_out_tlb_load, directly pass oi to the tcg_out_tlb_load function and compute mem_index and s_bits there. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2015-09-19tcg/mips: move tcg_out_addsub2Aurelien Jarno
Somehow the tcg_out_addsub2 function ended-up in the middle of the qemu_ld/st related functions. Move it with other arithmetics related functions. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-04-30 09:37:24 +0000