aboutsummaryrefslogtreecommitdiff
path: root/tcg
AgeCommit message (Collapse)Author
2013-12-21tcg/i386: fix a commentAurelien Jarno
The comments apply to 8-bit stores, not 8-byte stores. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-12-10tcg: Use bitmaps for free temporariesRichard Henderson
We previously allocated 32-bits per temp for the next_free_temp entry. We now allocate 4 bits per temp across the 4 bitmaps. Using a linked list meant that if a translator is tweeked, resulting in temps being freed in a different order, that would have follow-on effects throughout the TB. Always allocating the lowest free temp means that follow-on effects are minimized, which can make it easier to diff output when debugging the translators. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-11-30tcg-s390: Use qemu_getauxval in query_facilitiesRichard Henderson
No need to set up a SIGILL signal handler for detection anymore. Remove a ton of sanity checks that must be true, given that we're requiring a 64-bit build (the note about 31-bit KVM is satisfied by configuring with TCI). Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-11-30tcg-arm: Use qemu_getauxvalRichard Henderson
Allow host detection on linux systems without glibc 2.16 or later. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-11-30tcg-ppc64: Use qemu_getauxvalRichard Henderson
Allow host detection on linux systems without glibc 2.16 or later. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-11-18tcg-ia64: Introduce tcg_opc_bswap64_iRichard Henderson
Acked-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-11-18tcg-ia64: Introduce tcg_opc_ext_iRichard Henderson
Being able to "extend" from 64-bits (with a mov) simplifies a few places where the conditional breaks the train of thought. Acked-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-11-18tcg-ia64: Introduce tcg_opc_movi_aRichard Henderson
Acked-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-11-18tcg-ia64: Introduce tcg_opc_mov_aRichard Henderson
Acked-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-11-18tcg-ia64: Use A3 form of logical operationsRichard Henderson
We can and/or/xor/andcm small constants, saving one cycle. Acked-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-11-18tcg-ia64: Use SUB_A3 and ADDS_A4 for subtractionRichard Henderson
We can subtract from more small constants that just 0 with one insn, and we can add the negative for most small constants. Acked-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-11-18tcg-ia64: Use ADDS for small additionRichard Henderson
Avoids a wasted cycle loading up small constants. Simplify the code assuming the tcg optimizer is going to work and don't expect the first operand of the add to be constant. Acked-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-11-18tcg-ia64: Avoid unnecessary stop bit in tcg_out_aluRichard Henderson
When performing an operation with two input registers, we'd leave the stop bit (and thus an extra cycle) that's only needed when one or the other input is a constant. Acked-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-11-18tcg-ia64: Move AREG0 to R32Richard Henderson
Since the move away from the global areg0, we're no longer globally reserving areg0. Which means our use of R7 clobbers a call-saved register. Shift areg0 into the windowed registers. Indeed, choose the incoming parameter register that it comes to us by. This requires moving the register holding the return address elsewhere. Choose R33 for tidiness. Acked-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-11-18tcg-ia64: Simplify brcondRichard Henderson
There was a misconception that a stop bit is required between a compare and the branch that uses the predicate set by the compare. This lead to the usage of an extra bundle in which to perform the compare. The extra bundle left room for constants to be loaded for use with the compare insn. If we pack the compare and the branch together in the same bundle, then there's no longer any room for non-zero constants. At which point we can eliminate half the function by not handling them. Acked-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-11-18tcg-ia64: Handle constant callsRichard Henderson
Using only indirect calls results in 3 bundles (one to load the descriptor address), and 4 stop bits. By looking through the descriptor to the constants, we can perform the call with 2 bundles and only 1 stop bit. Acked-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-11-18tcg-ia64: Use shortcuts for nop insnsRichard Henderson
There's no need to go through the full opcode-to-insn function call to generate nops. This makes the source a bit more readable. Acked-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-11-18tcg-ia64: Use TCGMemOp within qemu_ldst routinesRichard Henderson
Acked-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-10-12tcg-ppc64: Support new ldst opcodesRichard Henderson
Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-10-12tcg-ppc: Support new ldst opcodesRichard Henderson
Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-10-12tcg-ppc64: Convert to le/be ldst helpersRichard Henderson
Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-10-12tcg-ppc: Convert to le/be ldst helpersRichard Henderson
Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-10-12tcg-ppc64: Use TCGMemOp within qemu_ldst routinesRichard Henderson
Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-10-12tcg-ppc: Use TCGMemOp within qemu_ldst routinesRichard Henderson
Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-10-12tcg-arm: Improve GUEST_BASE qemu_ld/stRichard Henderson
If we pull the code to emit the actual load/store into a subroutine, we can share the reg+reg addressing mode code between softmmu and usermode. This lets us load GUEST_BASE into a temporary register rather than attempting to add it piece-wise to the address. Which lets us use movw+movt for armv7, rather than (up to) 4 adds. Code size for pre-armv7 stays the same. Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-10-12tcg-arm: Convert to new ldst opcodesRichard Henderson
Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-10-12tcg-arm: Tidy variable naming convention in qemu_ld/stRichard Henderson
s/addr_reg2/addrhi/ s/addr_reg/addrlo/ s/data_reg2/datahi/ s/data_reg/datalo/ Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-10-12tcg-arm: Convert to le/be ldst helpersRichard Henderson
Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-10-12tcg-arm: Use TCGMemOp within qemu_ldst routinesRichard Henderson
Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-10-12tcg-i386: Support new ldst opcodesRichard Henderson
No support for helpers with non-default endianness yet, but good enough to test the opcodes. Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-10-12tcg-i386: Remove "cb" output restriction from qemu_st8 for i386Richard Henderson
Once we form a combined qemu_st_i32 opcode, we won't be able to have separate constraints based on size. This one is fairly easy to work around, since eax is available as a scratch register. When storing variable data, this tends to merely exchange one mov for another. E.g. -: mov %esi,%ecx ... -: mov %cl,(%edx) +: mov %esi,%eax +: mov %al,(%edx) Where we do have a regression is when storing constant data, in which we may load the constant into edi, when only ecx/ebx ought to be used. The proper way to recover this regression is to allow constants as arguments to qemu_st_i32, so that we never load the constant data into a register at all, must less the wrong register. TBD. Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-10-12tcg-i386: Tidy softmmu routinesRichard Henderson
Pass two TCGReg to tcg_out_tlb_load, rather than idx+args. Move ldst_optimization routines just below tcg_out_tlb_load to avoid the need for forward declarations. Use TCGReg enum in preference to int where apprpriate. Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-10-12tcg-i386: Use TCGMemOp within qemu_ldst routinesRichard Henderson
Step one in the transition, with constants passed down from tcg_out_op. Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-10-12tcg: Use TCGMemOp for TCGLabelQemuLdst.opcRichard Henderson
Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-10-10exec: Add both big- and little-endian memory helpersRichard Henderson
Step three in the transition: helpers not tied to the target "default" endianness. To be used when the guest uses a memory operation with non-default endianness. Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-10-10tcg: Add qemu_ld_st_i32/64Richard Henderson
Step two in the transition, adding the new ldst opcodes. Keep the old opcodes around until all backends support the new opcodes. Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-10-10tcg: Add TCGMemOpRichard Henderson
Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-10-10tcg: Add tcg-be-ldst.hRichard Henderson
Move TCGLabelQemuLdst and related stuff out of tcg.h. Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-10-10tcg: Add tcg-be-null.hRichard Henderson
This is a no-op backend data implementation, for those targets that are not currently using the load/store optimization path. This is prepatory to always requiring these functions in all backends. Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-10-10tcg-aarch64: Update to helper_ret_*_mmu routinesRichard Henderson
A minimal update to use the new helpers with the return address argument. Tested-by: Claudio Fontana <claudio.fontana@linaro.org> Reviewed-by: Claudio Fontana <claudio.fontana@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-10-10tcg: Merge tcg_register_helper into tcg_context_initRichard Henderson
Eliminates the repeated checks for having created the s->helpers hash table. Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-10-10tcg: Add tcg-runtime.c helpers to all_helpersRichard Henderson
For the few targets that actually use these, we'd not report them symbolicly in the tcg opcode logs. Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-10-10tcg: Put target helper data into an array.Richard Henderson
One call inside of a loop to tcg_register_helper instead of hundreds of sequential calls. Presumably more icache and branch prediction friendly; resulting binary size mostly unchanged on x86_64, as we're trading 32-bit rip-relative references in .text for full 64-bit pointers in .rodata. Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-10-10tcg: Move helper registration into tcg_context_initRichard Henderson
No longer needs to be done on a per-target basis. Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-10-10tcg: Use a GHashTable for tcg_find_helperRichard Henderson
Slightly changes the interface, in that we now return name instead of a TCGHelperInfo structure, which goes away. Reviewed-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-10-10tcg: Delete tcg_helper_get_name declarationRichard Henderson
The function was deleted in 4dc81f2822187f4503d4bdb76785cafa5b28db0b. Reviewed-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-10-10tcg-hppa: Remove tcg backendRichard Henderson
Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-10-09Merge remote-tracking branch 'rth/tcg-arm-pull' into stagingAnthony Liguori
# By Richard Henderson # Via Richard Henderson * rth/tcg-arm-pull: tcg-arm: Move the tlb addend load earlier tcg-arm: Remove restriction on qemu_ld output register tcg-arm: Return register containing tlb addend tcg-arm: Move load of tlb addend into tcg_out_tlb_read tcg-arm: Use QEMU_BUILD_BUG_ON to verify constraints on tlb tcg-arm: Use strd for tcg_out_arg_reg64 tcg-arm: Rearrange slow-path qemu_ld/st tcg-arm: Use ldrd/strd for appropriate qemu_ld/st64 Message-id: 1380663109-14434-1-git-send-email-rth@twiddle.net Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
2013-10-09Merge remote-tracking branch 'sweil/tci' into stagingAnthony Liguori
# By Stefan Weil # Via Stefan Weil * sweil/tci: misc: Use new rotate functions bitops: Add rotate functions (rol8, ror8, ...) tci: Add implementation of rotl_i64, rotr_i64 Message-id: 1380137693-3729-1-git-send-email-sw@weilnetz.de Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
2013-10-01tcg-arm: Move the tlb addend load earlierRichard Henderson
There are free scheduling slots between the sequence of comparison instructions. This requires changing the register in use to avoid conflict with those compares. Signed-off-by: Richard Henderson <rth@twiddle.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-04-27 14:23:14 +0000