aboutsummaryrefslogtreecommitdiff
path: root/tcg/s390
AgeCommit message (Collapse)Author
2018-06-15tcg: Reduce max TB opcode countRichard Henderson
Also, assert that we don't overflow any of two different offsets into the TB. Both unwind and goto_tb both record a uint16_t for later use. This fixes an arm-softmmu test case utilizing NEON in which there is a TB generated that runs to 7800 opcodes, and compiles to 96k on an x86_64 host. This overflows the 16-bit offset in which we record the goto_tb reset offset. Because of that overflow, we install a jump destination that goes to neverland. Boom. With this reduced op count, the same TB compiles to about 48k for aarch64, ppc64le, and x86_64 hosts, and neither assertion fires. Cc: qemu-stable@nongnu.org Reported-by: "Jason A. Donenfeld" <Jason@zx2c4.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-11-03tcg/s390x: Use constant pool for prologueRichard Henderson
Rather than have separate code only used for guest_base, rely on a recent change to handle constant pool entries. Cc: qemu-s390x@nongnu.org Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-09-17tcg: Remove tcg_regset_set32Richard Henderson
It's not even clear what the interface REG and VAL32 were supposed to mean. All uses had REG = 0 and VAL32 was the bitset assigned to the destination. Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-09-17tcg: Remove tcg_regset_clearRichard Henderson
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-09-07tcg/s390: Use constant pool for cmpiRichard Henderson
Also use CHI/CGHI for 16-bit signed constants. Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-09-07tcg/s390: Use constant pool for xoriRichard Henderson
Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-09-07tcg/s390: Use constant pool for oriRichard Henderson
Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-09-07tcg/s390: Use constant pool for andiRichard Henderson
Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-09-07tcg/s390: Use constant pool for moviRichard Henderson
Split out maybe_out_small_movi for use with other operations that want to add to the constant pool. Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-09-07tcg/s390: Fix sign of patch_reloc addendRichard Henderson
We were passing in -2 instead of +2, but then ignoring the actual contents of addend in the calculation. Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-09-07tcg/s390: Introduce TCG_REG_TBRichard Henderson
Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-09-07tcg: Rearrange ldst label trackingRichard Henderson
Dispense with TCGBackendData, as it has never been used for more than holding a single pointer. Use a define in the cpu/tcg-target.h to signal requirement for TCGLabelQemuLdst, so that we can drop the no-op tcg-be-null.h stubs. Rename tcg-be-ldst.h to tcg-ldst.inc.c. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-09-07tcg: Move USE_DIRECT_JUMP discriminator to tcg/cpu/tcg-target.hRichard Henderson
Replace the USE_DIRECT_JUMP ifdef with a TCG_TARGET_HAS_direct_jump boolean test. Replace the tb_set_jmp_target1 ifdef with an unconditional function tb_target_set_jmp_target. While we're touching all backends, add a parameter for tb->tc_ptr; we're going to need it shortly for some backends. Move tb_set_jmp_target and tb_add_jump from exec-all.h to cpu-exec.c. This opens the possibility for TCG_TARGET_HAS_direct_jump to be a runtime decision -- based on host cpu capabilities, the size of code_gen_buffer, or a future debugging switch. Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-09-06tcg/s390: Use slbgr for setcond le and leuRichard Henderson
Acked-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-09-06tcg/s390: Use load-on-condition-2 facilityRichard Henderson
This allows LOAD HALFWORD IMMEDIATE ON CONDITION, eliminating one insn in some common cases. Acked-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-09-06tcg/s390: Use distinct-operands facilityRichard Henderson
This allows using a 3-operand insn form for some arithmetic, logicals and shifts. Acked-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-09-06tcg/s390: Merge ori+xori facilities check to tcg_target_op_defRichard Henderson
Acked-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-09-06tcg/s390: Merge add2i facilities check to tcg_target_op_defRichard Henderson
Acked-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-09-06tcg/s390: Merge muli facilities check to tcg_target_op_defRichard Henderson
Acked-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-09-06tcg/s390: Merge cmpi facilities check to tcg_target_op_defRichard Henderson
Acked-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-09-06tcg/s390: Fully convert tcg_target_op_defRichard Henderson
Use a switch instead of searching a table. Acked-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-09-05tcg: Add tcg target default memory orderingPranith Kumar
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com> Message-Id: <20170829063313.10237-3-bobby.prani@gmail.com> [rth: Dropped ia64 hunk] Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-06-05tcg/s390: Implement goto_ptrRichard Henderson
Tested-by: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-06-05tcg: Introduce goto_ptr opcode and tcg_gen_lookup_and_goto_ptrEmilio G. Cota
Instead of exporting goto_ptr directly to TCG frontends, export tcg_gen_lookup_and_goto_ptr(), which calls goto_ptr with the pointer returned by the lookup_tb_ptr() helper. This is the only use case we have for goto_ptr and lookup_tb_ptr, so having this function is very convenient. Furthermore, it trivially allows us to avoid calling the lookup helper if goto_ptr is not implemented by the backend. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Emilio G. Cota <cota@braap.org> Message-Id: <1493263764-18657-2-git-send-email-cota@braap.org> Message-Id: <1493263764-18657-3-git-send-email-cota@braap.org> Message-Id: <1493263764-18657-4-git-send-email-cota@braap.org> Message-Id: <1493263764-18657-5-git-send-email-cota@braap.org> [rth: Squashed 4 related commits.] Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-01-13tcg/s390: Fix merge error with facilitiesRichard Henderson
The variable was renamed s390_facilities. Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-01-10tcg: Add opcode for ctpopRichard Henderson
The number of actual invocations of ctpop itself does not warrent an opcode, but it is very helpful for POWER7 to use in generating an expansion for ctz. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-01-10tcg/s390: Handle clz opcodeRichard Henderson
Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-01-10tcg: Add clz and ctz opcodesRichard Henderson
Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-01-10tcg: Pass the opcode width to target_parse_constraintRichard Henderson
This will let us choose how to interpret a given constraint depending on whether the opcode is 32- or 64-bit. Which will let us share more constraint combinations between opcodes. At the same time, change the interface to return the advanced pointer instead of passing it in/out by reference. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-01-10tcg: Transition flat op_defs array to a target callbackRichard Henderson
This will allow the target to tailor the constraints to the auto-detected ISA extensions. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-01-10tcg/s390: Support deposit into zeroRichard Henderson
Since we can no longer use matching constraints, this does mean we must handle that data movement by hand. Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-01-10tcg/s390: Implement field extraction opcodesRichard Henderson
Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-01-10tcg/s390: Expose host facilities to tcg-target.hRichard Henderson
This lets us expose facilities to TCG_TARGET_HAS_* defines directly, rather than hiding behind function calls. Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-01-10tcg: Add field extraction primitivesRichard Henderson
Adds tcg_gen_extract_* and tcg_gen_sextract_* for extraction of fixed position bitfields, much like we already have for deposit. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2016-12-23tcg/s390: Remove 'R' constraintRichard Henderson
Since R0 is reserved, we don't need a special case constraint. Signed-off-by: Richard Henderson <rth@twiddle.net>
2016-12-23tcg/s390: Fix setcond expansionRichard Henderson
We can't use LOAD AND TEST for unsigned data and then expect to extract the result with ADD LOGICAL WITH CARRY. Fall through to using COMPARE LOGICAL IMMEDIATE instead. Signed-off-by: Richard Henderson <rth@twiddle.net>
2016-09-16tcg/s390: Add support for fencePranith Kumar
Cc: Alexander Graf <agraf@suse.de> Signed-off-by: Pranith Kumar <bobby.prani@gmail.com> Message-Id: <20160714202026.9727-9-bobby.prani@gmail.com> Signed-off-by: Richard Henderson <rth@twiddle.net>
2016-09-16tcg: Support arbitrary size + alignmentRichard Henderson
Previously we allowed fully unaligned operations, but not operations that are aligned but with less alignment than the operation size. In addition, arm32, ia64, mips, and sparc had been omitted from the previous overalignment patch, which would have led to that alignment being enforced. Signed-off-by: Richard Henderson <rth@twiddle.net>
2016-07-12tcg: Clean up tcg-target.h header guardsMarkus Armbruster
These use guard symbols like TCG_TARGET_$target. scripts/clean-header-guards.pl doesn't like them because they don't match their file name (they should, to make guard collisions less likely). Clean them up: use guard symbol $target_TCG_TARGET_H for tcg/$target/tcg-target.h. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Richard Henderson <rth@twiddle.net>
2016-07-05tcg: Improve the alignment check infrastructureSergey Sorokin
Some architectures (e.g. ARMv8) need the address which is aligned to a size more than the size of the memory access. To support such check it's enough the current costless alignment check implementation in QEMU, but we need to support an alignment size specifying. Signed-off-by: Sergey Sorokin <afarallax@yandex.ru> Message-Id: <1466705806-679898-1-git-send-email-afarallax@yandex.ru> Signed-off-by: Richard Henderson <rth@twiddle.net> [rth: Assert in tcg_canonicalize_memop. Leave get_alignment_bits available for, though unused by, user-mode. Retain logging difference based on ALIGNED_ONLY.]
2016-07-05tcg: Optimize spills of constantsRichard Henderson
While we can store constants via constrants on INDEX_op_st_i32 et al, we weren't able to spill constants to backing store. Add a new backend interface, tcg_out_sti, which may store the constant (and is allowed to fail). Rearrange the temp_* helpers so that we only attempt to directly store a constant when the temp is becoming dead/free. Signed-off-by: Richard Henderson <rth@twiddle.net>
2016-05-12tcg: Clean up direct block chaining data fieldsSergey Fedorov
Briefly describe in a comment how direct block chaining is done. It should help in understanding of the following data fields. Rename some fields in TranslationBlock and TCGContext structures to better reflect their purpose (dropping excessive 'tb_' prefix in TranslationBlock but keeping it in TCGContext): tb_next_offset => jmp_reset_offset tb_jmp_offset => jmp_insn_offset tb_next => jmp_target_addr jmp_next => jmp_list_next jmp_first => jmp_list_first Avoid using a magic constant as an invalid offset which is used to indicate that there's no n-th jump generated. Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com> Signed-off-by: Sergey Fedorov <sergey.fedorov@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2016-05-12tcg/s390: Make direct jump patching thread-safeSergey Fedorov
Ensure direct jump patching in s390 is atomic by: * naturally aligning a location of direct jump address; * using atomic_read()/atomic_set() for code patching. Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com> Signed-off-by: Sergey Fedorov <sergey.fedorov@linaro.org> Message-Id: <1461341333-19646-7-git-send-email-sergey.fedorov@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2016-04-21tcg: check for CONFIG_DEBUG_TCG instead of NDEBUGAurelien Jarno
Check for CONFIG_DEBUG_TCG instead of NDEBUG, drop now useless code. Cc: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Message-id: 1461228530-14852-2-git-send-email-aurelien@aurel32.net Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-04-21tcg: use tcg_debug_assert instead of assert (fix performance regression)Aurelien Jarno
The TCG code is quite performance sensitive, but at the same time can also be quite tricky. That is why asserts that can be enabled with the --enable-debug-tcg configure option. This used to work the following way: | #include "config.h" | | ... | | #if !defined(CONFIG_DEBUG_TCG) && !defined(NDEBUG) | /* define it to suppress various consistency checks (faster) */ | #define NDEBUG | #endif | | ... | | #include <assert.h> Since commit 757e725b (tcg: Clean up includes) "config.h" as been replaced by "qemu/osdep.h" which itself includes <assert.h>. As a consequence the assertions are always enabled, even when using --disable-debug-tcg, causing a performance regression, especially on targets with many registers. For instance on qemu-system-ppc the speed difference is about 15%. tcg_debug_assert is controlled directly by CONFIG_DEBUG_TCG and already uses in some places. This patch replaces all the calls to assert into calss to tcg_debug_assert. Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Message-id: 1461228530-14852-1-git-send-email-aurelien@aurel32.net Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-02-23tcg: Remove unnecessary osdep.h includes from tcg-target.inc.cPeter Maydell
Commit 757e725b58c57d added a number of #include "qemu/osdep.h" files to the tcg-target.c files (as they were named at the time). These are unnecessary because these files are not standalone C files, and the tcg/tcg.c file which includes them will have already included osdep.h on their behalf. Remove the unneeded include directives. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <1456238983-10160-4-git-send-email-peter.maydell@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2016-02-23tcg: Rename tcg-target.c to tcg-target.inc.cPeter Maydell
Rename the per-architecture tcg-target.c files to tcg-target.inc.c. This makes it clearer that they are not intended to be standalone C files, but are instead #included into another source file. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <1456238983-10160-2-git-send-email-peter.maydell@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2016-01-29tcg: Clean up includesPeter Maydell
Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1453832250-766-16-git-send-email-peter.maydell@linaro.org
2015-08-28s390: fix softmmu compilationLaurent Vivier
guest_base must be used only in linux-user mode. Signed-off-by: Laurent Vivier <laurent@vivier.eu> Message-id: 1440757421-9674-1-git-send-email-laurent@vivier.eu Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-08-24linux-user: remove useless macros GUEST_BASE and RESERVED_VALaurent Vivier
As we have removed CONFIG_USE_GUEST_BASE, we always use a guest base and the macros GUEST_BASE and RESERVED_VA become useless: replace them by their values. Reviewed-by: Alexander Graf <agraf@suse.de> Signed-off-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <1440420834-8388-1-git-send-email-laurent@vivier.eu> Signed-off-by: Richard Henderson <rth@twiddle.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-05-12 08:38:34 +0000