aboutsummaryrefslogtreecommitdiff
path: root/tcg/mips/tcg-target.inc.c
AgeCommit message (Collapse)Author
2017-01-06tcg-mips: Add bswap32u and bswap64Jin Guojie
Without the mips32r2 instructions to perform swapping, bswap is quite large, dominating the size of each reverse-endian qemu_ld/qemu_st operation. Create two subroutines in the prologue block. The subroutines require extra reserved registers (TCG_TMP[2, 3]). Using these within qemu_ld means that we need not place additional restrictions on the qemu_ld outputs. Tested-by: Aurelien Jarno <aurelien@aurel32.net> Tested-by: James Hogan <james.hogan@imgtec.com> Tested-by: YunQiang Su <wzssyqa@gmail.com> Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Jin Guojie <jinguojie@loongson.cn> Message-Id: <1483592275-4496-5-git-send-email-jinguojie@loongson.cn>
2017-01-06tcg-mips: Support 64-bit opcodesJin Guojie
Bulk patch adding 64-bit opcodes into tcg_out_op. Note that mips64 is as yet neither complete nor enabled. Tested-by: Aurelien Jarno <aurelien@aurel32.net> Tested-by: James Hogan <james.hogan@imgtec.com> Tested-by: YunQiang Su <wzssyqa@gmail.com> Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Jin Guojie <jinguojie@loongson.cn> Message-Id: <1483592275-4496-4-git-send-email-jinguojie@loongson.cn>
2017-01-06tcg-mips: Add mips64 opcodesJin Guojie
Since the mips manual tables are in octal, reorg all of the opcodes into that format for clarity. Note that the 64-bit opcodes are as yet unused. Tested-by: Aurelien Jarno <aurelien@aurel32.net> Tested-by: James Hogan <james.hogan@imgtec.com> Tested-by: YunQiang Su <wzssyqa@gmail.com> Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Jin Guojie <jinguojie@loongson.cn> Message-Id: <1483592275-4496-3-git-send-email-jinguojie@loongson.cn>
2017-01-06tcg-mips: Move bswap code to a subroutineJin Guojie
Without the mips32r2 instructions to perform swapping, bswap is quite large, dominating the size of each reverse-endian qemu_ld/qemu_st operation. Create a subroutine in the prologue block. The subroutine requires extra reserved registers (TCG_TMP[2, 3]). Using these within qemu_ld means that we need not place additional restrictions on the qemu_ld outputs. Tested-by: Aurelien Jarno <aurelien@aurel32.net> Tested-by: James Hogan <james.hogan@imgtec.com> Tested-by: YunQiang Su <wzssyqa@gmail.com> Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Jin Guojie <jinguojie@loongson.cn> Message-Id: <1483592275-4496-2-git-send-email-jinguojie@loongson.cn>
2016-09-16tcg/mips: Add support for fencePranith Kumar
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com> Message-Id: <20160714202026.9727-7-bobby.prani@gmail.com> Signed-off-by: Richard Henderson <rth@twiddle.net>
2016-09-16tcg: Support arbitrary size + alignmentRichard Henderson
Previously we allowed fully unaligned operations, but not operations that are aligned but with less alignment than the operation size. In addition, arm32, ia64, mips, and sparc had been omitted from the previous overalignment patch, which would have led to that alignment being enforced. Signed-off-by: Richard Henderson <rth@twiddle.net>
2016-07-05tcg: Optimize spills of constantsRichard Henderson
While we can store constants via constrants on INDEX_op_st_i32 et al, we weren't able to spill constants to backing store. Add a new backend interface, tcg_out_sti, which may store the constant (and is allowed to fail). Rearrange the temp_* helpers so that we only attempt to directly store a constant when the temp is becoming dead/free. Signed-off-by: Richard Henderson <rth@twiddle.net>
2016-05-12tcg: Clean up direct block chaining data fieldsSergey Fedorov
Briefly describe in a comment how direct block chaining is done. It should help in understanding of the following data fields. Rename some fields in TranslationBlock and TCGContext structures to better reflect their purpose (dropping excessive 'tb_' prefix in TranslationBlock but keeping it in TCGContext): tb_next_offset => jmp_reset_offset tb_jmp_offset => jmp_insn_offset tb_next => jmp_target_addr jmp_next => jmp_list_next jmp_first => jmp_list_first Avoid using a magic constant as an invalid offset which is used to indicate that there's no n-th jump generated. Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com> Signed-off-by: Sergey Fedorov <sergey.fedorov@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2016-05-12tcg/mips: Make direct jump patching thread-safeSergey Fedorov
Ensure direct jump patching in MIPS is atomic by using atomic_read()/atomic_set() for code patching. Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com> Signed-off-by: Sergey Fedorov <sergey.fedorov@linaro.org> Message-Id: <1461341333-19646-11-git-send-email-sergey.fedorov@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net> [rth: Merged the deposit32 followup.] [rth: Merged the following followup.] Message-Id: <1462210518-26522-1-git-send-email-sergey.fedorov@linaro.org>
2016-04-21tcg: check for CONFIG_DEBUG_TCG instead of NDEBUGAurelien Jarno
Check for CONFIG_DEBUG_TCG instead of NDEBUG, drop now useless code. Cc: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Message-id: 1461228530-14852-2-git-send-email-aurelien@aurel32.net Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-04-21tcg: use tcg_debug_assert instead of assert (fix performance regression)Aurelien Jarno
The TCG code is quite performance sensitive, but at the same time can also be quite tricky. That is why asserts that can be enabled with the --enable-debug-tcg configure option. This used to work the following way: | #include "config.h" | | ... | | #if !defined(CONFIG_DEBUG_TCG) && !defined(NDEBUG) | /* define it to suppress various consistency checks (faster) */ | #define NDEBUG | #endif | | ... | | #include <assert.h> Since commit 757e725b (tcg: Clean up includes) "config.h" as been replaced by "qemu/osdep.h" which itself includes <assert.h>. As a consequence the assertions are always enabled, even when using --disable-debug-tcg, causing a performance regression, especially on targets with many registers. For instance on qemu-system-ppc the speed difference is about 15%. tcg_debug_assert is controlled directly by CONFIG_DEBUG_TCG and already uses in some places. This patch replaces all the calls to assert into calss to tcg_debug_assert. Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Message-id: 1461228530-14852-1-git-send-email-aurelien@aurel32.net Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-04-05tcg/mips: Fix type of tcg_target_reg_alloc_order[]James Hogan
The MIPS TCG backend is the only one to have tcg_target_reg_alloc_order[] elements of type TCGReg rather than int. This resulted in commit 91478cefaaf2 ("tcg: Allocate indirect_base temporaries in a different order") breaking the build on MIPS since the type differed from indirect_reg_alloc_order[]: tcg/tcg.c:1725:44: error: pointer type mismatch in conditional expression [-Werror] order = rev ? indirect_reg_alloc_order : tcg_target_reg_alloc_order; ^ Make it an array of ints to fix the build and match other architectures. Fixes: 91478cefaaf2 ("tcg: Allocate indirect_base temporaries in a different order") Signed-off-by: James Hogan <james.hogan@imgtec.com> Acked-by: Aurelien Jarno <aurelien@aurel32.net> Message-Id: <1459522179-6584-1-git-send-email-james.hogan@imgtec.com> Signed-off-by: Richard Henderson <rth@twiddle.net>
2016-02-23tcg: Remove unnecessary osdep.h includes from tcg-target.inc.cPeter Maydell
Commit 757e725b58c57d added a number of #include "qemu/osdep.h" files to the tcg-target.c files (as they were named at the time). These are unnecessary because these files are not standalone C files, and the tcg/tcg.c file which includes them will have already included osdep.h on their behalf. Remove the unneeded include directives. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <1456238983-10160-4-git-send-email-peter.maydell@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2016-02-23tcg: Rename tcg-target.c to tcg-target.inc.cPeter Maydell
Rename the per-architecture tcg-target.c files to tcg-target.inc.c. This makes it clearer that they are not intended to be standalone C files, but are instead #included into another source file. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <1456238983-10160-2-git-send-email-peter.maydell@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>