aboutsummaryrefslogtreecommitdiff
path: root/target/s390x/kvm.c
AgeCommit message (Collapse)Author
2020-04-29s390x: Add unpack facility feature to GA1Christian Borntraeger
The unpack facility is an indication that diagnose 308 subcodes 8-10 are available to the guest. That means, that the guest can put itself into protected mode. Once it is in protected mode, the hardware stops any attempt of VM introspection by the hypervisor. Some features are currently not supported in protected mode: * vfio devices * Migration * Huge page backings Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Janosch Frank <frankja@linux.ibm.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <20200319131921.2367-17-frankja@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2020-04-29s390x: protvirt: SCLP interpretationJanosch Frank
SCLP for a protected guest is done over the SIDAD, so we need to use the s390_cpu_pv_mem_* functions to access the SIDAD instead of guest memory when reading/writing SCBs. To not confuse the sclp emulation, we set 0x4000 as the SCCB address, since the function that injects the sclp external interrupt would reject a zero sccb address. Signed-off-by: Janosch Frank <frankja@linux.ibm.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Message-Id: <20200319131921.2367-10-frankja@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2020-04-29s390x: protvirt: Move STSI data over SIDADJanosch Frank
For protected guests, we need to put the STSI emulation results into the SIDA, so SIE will write them into the guest at the next entry. Signed-off-by: Janosch Frank <frankja@linux.ibm.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <20200319131921.2367-9-frankja@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2020-04-29s390x: Add SIDA memory opsJanosch Frank
Protected guests save the instruction control blocks in the SIDA instead of QEMU/KVM directly accessing the guest's memory. Let's introduce new functions to access the SIDA. The memops for doing so are available with KVM_CAP_S390_PROTECTED, so let's check for that. Signed-off-by: Janosch Frank <frankja@linux.ibm.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <20200319131921.2367-8-frankja@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2020-04-29s390x: protvirt: KVM intercept changesJanosch Frank
Protected VMs no longer intercept with code 4 for an instruction interception. Instead they have codes 104 and 108 for protected instruction interception and protected instruction notification respectively. The 104 mirrors the 4 interception. The 108 is a notification interception to let KVM and QEMU know that something changed and we need to update tracking information or perform specific tasks. It's currently taken for the following instructions: * spx (To inform about the changed prefix location) * sclp (On incorrect SCCB values, so we can inject a IRQ) * sigp (All but "stop and store status") * diag308 (Subcodes 0/1) Of these exits only sclp errors, state changing sigps and diag308 will reach QEMU. QEMU will do its parts of the job, while the ultravisor has done the instruction part of the job. Signed-off-by: Janosch Frank <frankja@linux.ibm.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <20200319131921.2367-7-frankja@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2020-04-29s390x: protvirt: Support unpack facilityJanosch Frank
The unpack facility provides the means to setup a protected guest. A protected guest cannot be introspected by the hypervisor or any user/administrator of the machine it is running on. Protected guests are encrypted at rest and need a special boot mechanism via diag308 subcode 8 and 10. Code 8 sets the PV specific IPLB which is retained separately from those set via code 5. Code 10 is used to unpack the VM into protected memory, verify its integrity and start it. Signed-off-by: Janosch Frank <frankja@linux.ibm.com> Co-developed-by: Christian Borntraeger <borntraeger@de.ibm.com> [Changes to machine] Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <20200323083606.24520-1-frankja@linux.ibm.com> [CH: fixed up KVM_PV_VM_ -> KVM_PV_] Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2020-04-02s390x: kvm: Fix number of cpu reports for stsi 3.2.2Janosch Frank
The cpu number reporting is handled by KVM and QEMU only fills in the VM name, uuid and other values. Unfortunately KVM doesn't report reserved cpus and doesn't even know they exist until the are created via the ioctl. So let's fix up the cpu values after KVM has written its values to the 3.2.2 sysib. To be consistent, we use the same code to retrieve the cpu numbers as the STSI TCG code in target/s390x/misc_helper.c:HELPER(stsi). Signed-off-by: Janosch Frank <frankja@linux.ibm.com> Reviewed-by: David Hildenbrand <david@redhat.com> Message-Id: <20200331110123.3774-1-frankja@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2020-02-26s390x: Add missing vcpu reset functionsJanosch Frank
Up to now we only had an ioctl to reset vcpu data QEMU couldn't reach for the initial reset, which was also called for the clear reset. To be architecture compliant, we also need to clear local interrupts on a normal reset. Because of this and the upcoming protvirt support we need to add ioctls for the missing clear and normal resets. Signed-off-by: Janosch Frank <frankja@linux.ibm.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Acked-by: David Hildenbrand <david@redhat.com> Message-Id: <20200214151636.8764-3-frankja@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2020-01-27target/s390x/kvm: Enable adapter interruption suppression againThomas Huth
The AIS feature has been disabled late in the v2.10 development cycle since there were some issues with migration (see commit 3f2d07b3b01ea61126b - "s390x/ais: for 2.10 stable: disable ais facility"). We originally wanted to enable it again for newer machine types, but apparently we forgot to do this so far. Let's do it now for the machines that support proper CPU models. Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1756946 Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <20200122101437.5069-1-thuth@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> Tested-by: Matthew Rosato <mjrosato@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2019-12-17kvm: introduce kvm_kernel_irqchip_* functionsPaolo Bonzini
The KVMState struct is opaque, so provide accessors for the fields that will be moved from current_machine to the accelerator. For now they just forward to the machine object, but this will change. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-12-14s390x: kvm: Make kvm_sclp_service_call voidJanosch Frank
It defaults to returning 0 anyway and that return value is not necessary, as 0 is also the default rc that the caller would return. While doing that we can simplify the logic a bit and return early if we inject a PGM exception. Signed-off-by: Janosch Frank <frankja@linux.ibm.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20191129091713.4582-1-frankja@linux.ibm.com> Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2019-10-21s390x/kvm: Set default cpu model for all machine classesDavid Hildenbrand
We have to set the default model of all machine classes, not just for the active one. Otherwise, "query-machines" will indicate the wrong CPU model ("qemu-s390x-cpu" instead of "host-s390x-cpu") as "default-cpu-type". Doing a {"execute":"query-machines"} under KVM now results in {"return": [ { "hotpluggable-cpus": true, "name": "s390-ccw-virtio-4.0", "numa-mem-supported": false, "default-cpu-type": "host-s390x-cpu", "cpu-max": 248, "deprecated": false}, { "hotpluggable-cpus": true, "name": "s390-ccw-virtio-2.7", "numa-mem-supported": false, "default-cpu-type": "host-s390x-cpu", "cpu-max": 248, "deprecated": false } ... Libvirt probes all machines via "-machine none,accel=kvm:tcg" and will currently see the wrong CPU model under KVM. Reported-by: Jiri Denemark <jdenemar@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Fixes: b6805e127c6b ("s390x: use generic cpu_model parsing") Cc: Igor Mammedov <imammedo@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20191021100515.6978-1-david@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2019-09-30s390/kvm: split kvm mem slots at 4TBChristian Borntraeger
Instead of splitting at an unaligned address, we can simply split at 4TB. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Igor Mammedov <imammedo@redhat.com>
2019-09-30s390: do not call memory_region_allocate_system_memory() multiple timesIgor Mammedov
s390 was trying to solve limited KVM memslot size issue by abusing memory_region_allocate_system_memory(), which breaks API contract where the function might be called only once. Beside an invalid use of API, the approach also introduced migration issue, since RAM chunks for each KVM_SLOT_MAX_BYTES are transferred in migration stream as separate RAMBlocks. After discussion [1], it was agreed to break migration from older QEMU for guest with RAM >8Tb (as it was relatively new (since 2.12) and considered to be not actually used downstream). Migration should keep working for guests with less than 8TB and for more than 8TB with QEMU 4.2 and newer binary. In case user tries to migrate more than 8TB guest, between incompatible QEMU versions, migration should fail gracefully due to non-exiting RAMBlock ID or RAMBlock size mismatch. Taking in account above and that now KVM code is able to split too big MemorySection into several memslots, partially revert commit (bb223055b s390-ccw-virtio: allow for systems larger that 7.999TB) and use kvm_set_max_memslot_size() to set KVMSlot size to KVM_SLOT_MAX_BYTES. 1) [PATCH RFC v2 4/4] s390: do not call memory_region_allocate_system_memory() multiple times Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20190924144751.24149-5-imammedo@redhat.com> Acked-by: Peter Xu <peterx@redhat.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2019-09-23s390x/kvm: Officially require at least kernel 3.15Thomas Huth
Since QEMU v2.10, the KVM acceleration does not work on older kernels anymore since the code accidentally requires the KVM_CAP_DEVICE_CTRL capability now - it should have been optional instead. Instead of fixing the bug, we asked in the ChangeLog of QEMU 2.11 - 3.0 that people should speak up if they still need support of QEMU running with KVM on older kernels, but seems like nobody really complained. Thus let's make this official now and turn it into a proper error message, telling the users to use at least kernel 3.15 now. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <20190913091443.27565-1-thuth@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2019-08-16sysemu: Split sysemu/runstate.h off sysemu/sysemu.hMarkus Armbruster
sysemu/sysemu.h is a rather unfocused dumping ground for stuff related to the system-emulator. Evidence: * It's included widely: in my "build everything" tree, changing sysemu/sysemu.h still triggers a recompile of some 1100 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h, down from 5400 due to the previous two commits). * It pulls in more than a dozen additional headers. Split stuff related to run state management into its own header sysemu/runstate.h. Touching sysemu/sysemu.h now recompiles some 850 objects. qemu/uuid.h also drops from 1100 to 850, and qapi/qapi-types-run-state.h from 4400 to 4200. Touching new sysemu/runstate.h recompiles some 500 objects. Since I'm touching MAINTAINERS to add sysemu/runstate.h anyway, also add qemu/main-loop.h. Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190812052359.30071-30-armbru@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> [Unbreak OS-X build]
2019-08-16Include qemu/main-loop.h lessMarkus Armbruster
In my "build everything" tree, changing qemu/main-loop.h triggers a recompile of some 5600 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). It includes block/aio.h, which in turn includes qemu/event_notifier.h, qemu/notify.h, qemu/processor.h, qemu/qsp.h, qemu/queue.h, qemu/thread-posix.h, qemu/thread.h, qemu/timer.h, and a few more. Include qemu/main-loop.h only where it's needed. Touching it now recompiles only some 1700 objects. For block/aio.h and qemu/event_notifier.h, these numbers drop from 5600 to 2800. For the others, they shrink only slightly. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190812052359.30071-21-armbru@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-08-16Include hw/hw.h exactly where neededMarkus Armbruster
In my "build everything" tree, changing hw/hw.h triggers a recompile of some 2600 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). The previous commits have left only the declaration of hw_error() in hw/hw.h. This permits dropping most of its inclusions. Touching it now recompiles less than 200 objects. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20190812052359.30071-19-armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-07-05hw/s390x: Replace global smp variables with machine smp propertiesLike Xu
The global smp variables in s390x are replaced with smp machine properties. A local variable of the same name would be introduced in the declaration phase if it's used widely in the context OR replace it on the spot if it's only used once. No semantic changes. Signed-off-by: Like Xu <like.xu@linux.intel.com> Message-Id: <20190518205428.90532-7-like.xu@linux.intel.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> [ehabkost: fix build failure at VCPU_IRQ_BUF_SIZE] Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> fixup! hw/s390x: Replace global smp variables with machine smp properties Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-06-21KVM: Introduce kvm_arch_destroy_vcpu()Liran Alon
Simiar to how kvm_init_vcpu() calls kvm_arch_init_vcpu() to perform arch-dependent initialisation, introduce kvm_arch_destroy_vcpu() to be called from kvm_destroy_vcpu() to perform arch-dependent destruction. This was added because some architectures (Such as i386) currently do not free memory that it have allocated in kvm_arch_init_vcpu(). Suggested-by: Maran Wilson <maran.wilson@oracle.com> Reviewed-by: Maran Wilson <maran.wilson@oracle.com> Signed-off-by: Liran Alon <liran.alon@oracle.com> Message-Id: <20190619162140.133674-3-liran.alon@oracle.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-06-07s390x: Use uint64_t for vector registersDavid Hildenbrand
CPU_DoubleU is primarily used to reinterpret between integer and floats. We don't really need this functionality. So let's just keep it simple and use an uint64_t. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: David Hildenbrand <david@redhat.com>
2019-05-21s390x/cpumodel: add Deflate-conversion facilityChristian Borntraeger
add the deflate conversion facility. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Message-Id: <20190429090250.7648-8-borntraeger@de.ibm.com> Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2019-05-21s390x/cpumodel: enhanced sort facilityChristian Borntraeger
add the enhanced sort facility. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: David Hildenbrand <david@redhat.com> Message-Id: <20190429090250.7648-7-borntraeger@de.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2019-05-21s390x/cpumodel: msa9 facilityChristian Borntraeger
Provide the MSA9 facility (stfle.155). This also contains pckmo subfunctions for key wrapping. Keep them in a separate group to disable those as a block if necessary. This is for example needed when disabling key wrapping via the HMC. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Message-Id: <20190429090250.7648-5-borntraeger@de.ibm.com> Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2019-04-25s390x/kvm: Configure page size after memory has actually been initializedDavid Hildenbrand
Right now we configure the pagesize quite early, when initializing KVM. This is long before system memory is actually allocated via memory_region_allocate_system_memory(), and therefore memory backends marked as mapped. Instead, let's configure the maximum page size after initializing memory in s390_memory_init(). cap_hpage_1m is still properly configured before creating any CPUs, and therefore before configuring the CPU model and eventually enabling CMMA. This is not a fix but rather a preparation for the future, when initial memory might reside on memory backends (not the case for s390x right now) We will replace qemu_getrampagesize() soon by a function that will always return the maximum page size (not the minimum page size, which only works by pure luck so far, as there are no memory backends). Acked-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20190417113143.5551-2-david@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2019-04-18s390x/kvm: Report warnings with warn_report(), not error_printf()Markus Armbruster
kvm_s390_mem_op() can fail in two ways: when !cap_mem_op, it returns -ENOSYS, and when kvm_vcpu_ioctl() fails, it returns -errno set by ioctl(). Its caller s390_cpu_virt_mem_rw() recovers from both failures. kvm_s390_mem_op() prints "KVM_S390_MEM_OP failed" with error_printf() in the latter failure mode. Since this is obviously a warning, use warn_report(). Perhaps the reporting should be left to the caller. It could warn on failure other than -ENOSYS. Cc: Thomas Huth <thuth@redhat.com> Cc: qemu-s390x@nongnu.org Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <20190417190641.26814-9-armbru@redhat.com>
2019-02-18s390x/kvm: add tracepoint to ioeventfd interfaceCornelia Huck
Trace when assigning/unassigning. Message-Id: <20190212153025.25425-1-cohuck@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2019-02-18s390x: always provide pci supportCornelia Huck
We tried to make pci support optional on s390x in the past; unfortunately, we still require the s390 phb to be created unconditionally due to backwards compatibility issues. Instead of sinking more effort into this (including compat handling for older machines etc.) for non-obvious gains, let's just make CONFIG_PCI something that is always set on s390x. Note that you can still fence off pci for the _guest_ if you provide a cpu model without the zpci feature. Message-Id: <20190211113255.3837-1-cohuck@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2019-02-18s390x: Fix the confusing contributions-after-2012 license statementsThomas Huth
The license information in these files is rather confusing. The text declares LGPL first, but then says that contributions after 2012 are licensed under the GPL instead. How should the average user who just downloaded the release tarball know which part is now GPL and which is LGPL? Looking at the text of the LGPL (see COPYING.LIB in the top directory), the license clearly states how this should be done instead: "3. You may opt to apply the terms of the ordinary GNU General Public License instead of this License to a given copy of the Library. To do this, you must alter all the notices that refer to this License, so that they refer to the ordinary GNU General Public License, version 2, instead of to this License." Thus let's clean up the confusing statements and use the proper GPL text only. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <1549456893-16589-1-git-send-email-thuth@redhat.com> Acked-by: Laurent Vivier <laurent@vivier.eu> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2019-02-04s390x: remove direct reference to mem_path global from s390x codeIgor Mammedov
I plan to deprecate -mem-path option and replace it with memory-backend, for that it's necessary to get rid of mem_path global variable. Do it for s390x case, replacing it with alternative way to enable 1Mb hugepages capability. Todo that replace qemu_mempath_getpagesize() with qemu_getrampagesize() which also checks for -mem-path provided RAM. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> Message-Id: <1548834906-133241-1-git-send-email-imammedo@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2018-10-12s390x/kvm: enable AP instruction interpretation for guestTony Krowiak
Let's use the KVM_SET_DEVICE_ATTR ioctl to enable hardware interpretation of AP instructions executed on the guest. If the S390_FEAT_AP feature is switched on for the guest, AP instructions must be interpreted by default; otherwise, they will be intercepted. This attribute setting may be overridden by a device. For example, a device may want to provide AP instructions to the guest (i.e., S390_FEAT_AP turned on), but it may want to emulate them. In this case, the AP instructions executed on the guest must be intercepted; so when the device is realized, it must disable interpretation. Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Tested-by: Pierre Morel <pmorel@linux.ibm.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Halil Pasic <pasic@linux.ibm.com> Tested-by: Christian Borntraeger <borntraeger@de.ibm.com> Message-Id: <20181010170309.12045-4-akrowiak@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2018-10-04s390x: move tcg_s390_program_interrupt() into TCG code and mark it noreturnDavid Hildenbrand
Move it into TCG-only code and provide a stub. Turn it into noreturn. As Richard noted, we currently don't log the psw.addr before restoring the state, fix that by moving (duplicating) the qemu_log_mask in the tcg/kvm handlers. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20180927130303.12236-2-david@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2018-10-04s390x: Fence huge pages prior to 3.1Janosch Frank
As the kernel has no way of disallowing the start of a huge page backed VM, we can migrate a running huge backed VM to a host that has no huge page KVM support. Let's glue huge page support support to the 3.1 machine, so we do not migrate to a destination host that doesn't have QEMU huge page support and can stop migration if KVM doesn't indicate support. Signed-off-by: Janosch Frank <frankja@linux.ibm.com> Message-Id: <20180928093435.198573-1-frankja@linux.ibm.com> Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2018-08-20s390x: Enable KVM huge page backing supportJanosch Frank
QEMU has had huge page support for a longer time already, but KVM memory management under s390x needed some changes to work with huge backings. Now that we have support, let's enable it if requested and available. Otherwise we now properly tell the user if there is no support and back out instead of failing to run the VM later on. Signed-off-by: Janosch Frank <frankja@linux.ibm.com> Reviewed-by: David Hildenbrand <david@redhat.com> Message-Id: <20180802070201.257406-1-frankja@linux.ibm.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2018-08-20s390x/kvm: add etoken facilityChristian Borntraeger
Provide the etoken facility. We need to handle cpu model, migration and clear reset. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Janosch Frank <frankja@linux.ibm.com> Message-Id: <20180731090448.36662-3-borntraeger@de.ibm.com> Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2018-07-02s390x/kvm: indicate alignment in legacy_s390_alloc()David Hildenbrand
Let's do this for completeness reason, although we don't support e.g. PCDIMM/NVDIMM, which would use the alignment for placing the memory region in guest physical memory. But maybe someday we would want to support something like this - then we don't forget about this if allowing multiple allocations in legacy_s390_alloc(). Use the same alignment as we would set in qemu_anon_ram_alloc(). Our fixed address satisfies this alignment (1MB). This implicitly sets the alignment of the underlying memory region. Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20180628113817.30814-3-david@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2018-07-02s390x/kvm: legacy_s390_alloc() only supports one allocationDavid Hildenbrand
We always allocate at a fixed address, a second allocation can therefore of course never work. We would simply overwrite mappings. This can e.g. happen in s390_memory_init(), if trying to allocate more than > 8TB. Let's just bail out, as there is no need for supporting it (legacy handling for z/VM). Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20180628113817.30814-2-david@redhat.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2018-07-02s390x/kvm: pass values instead of pointers to kvm_s390_set_clock_*()David Hildenbrand
We are going to factor out the TOD into a separate device and use const pointers for device class functions where possible. We are passing right now ordinary pointers that should never be touched when setting the TOD. Let's just pass the values directly. Note that s390_set_clock() will be removed in a follow-on patch and therefore its calling convention is not changed. Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20180627134410.4901-3-david@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2018-05-31target: Do not include "exec/address-spaces.h" if it is not necessaryPhilippe Mathieu-Daudé
Code change produced with: $ git grep '#include "exec/address-spaces.h"' target | \ cut -d: -f-1 | \ xargs egrep -L "(get_system_|address_space_)" | \ xargs sed -i.bak '/#include "exec\/address-spaces.h"/d' Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180528232719.4721-4-f4bug@amsat.org> Acked-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-05-14s390x: refactor reset/reipl handlingDavid Hildenbrand
Calling pause_all_vcpus()/resume_all_vcpus() from a VCPU thread might not be the best idea. As pause_all_vcpus() temporarily drops the qemu mutex, two parallel calls to pause_all_vcpus() can be active at a time, resulting in a deadlock. (either by two VCPUs or by the main thread and a VCPU) Let's handle it via the main loop instead, as suggested by Paolo. If we would have two parallel reset requests by two different VCPUs at the same time, the last one would win. We use the existing ipl device to handle it. The nice side effect is that we can get rid of reipl_requested. This change implies that all reset handling now goes via the common path, so "no-reboot" handling is now active for all kinds of reboots. Let's execute any CPU initialization code on the target CPU using run_on_cpu. Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20180424101859.10239-1-david@redhat.com> Acked-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2018-04-30s390x/kvm: cleanup calls to cpu_synchronize_state()David Hildenbrand
We have a call to cpu_synchronize_state() on every kvm_arch_handle_exit(). Let's remove the ones that are no longer needed. Remaining places (for s390x) are in - target/s390x/sigp.c, on the target CPU - target/s390x/cpu.c:s390_cpu_get_crash_info() While at it, use kvm_cpu_synchronize_state() instead of cpu_synchronize_state() in KVM code. (suggested by Thomas Huth) Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20180412093521.2469-1-david@redhat.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2018-04-09s390x/kvm: call cpu_synchronize_state() on every kvm_arch_handle_exit()David Hildenbrand
Manually having to use cpu_synchronize_state() is error prone. And as Christian Borntraeger discovered, e.g. handle_diag() is currently missing a cpu_synchronize_state(), as decode_basedisp_s() uses a general purpose register value internally. So let's do an overall cpu_synchronize_state(), which fixes at least the one mentioned BUG. We will clean up the superfluous cpu_synchronize_state() calls later. We now also call it (although maybe not neded) for - KVM_EXIT_S390_RESET -> s390_reipl_request() - KVM_EXIT_DEBUG -> kvm_arch_handle_debug_exit() - unmanagable/unimplemented intercepts - ICPT_CPU_STOP -> do_stop_interrupt() -> cpu gets halted - Scenarios where we inject an operation exception - handle_stsi() I don't think any of these are performance critical. Especially as we have all information directly contained in kvm_run, there are no additional IOCTLs to issue on modern kernels. Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20180406093552.13016-1-david@redhat.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2018-03-02Include less of the generated modular QAPI headersMarkus Armbruster
In my "build everything" tree, a change to the types in qapi-schema.json triggers a recompile of about 4800 out of 5100 objects. The previous commit split up qmp-commands.h, qmp-event.h, qmp-visit.h, qapi-types.h. Each of these headers still includes all its shards. Reduce compile time by including just the shards we actually need. To illustrate the benefits: adding a type to qapi/migration.json now recompiles some 2300 instead of 4800 objects. The next commit will improve it further. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180211093607.27351-24-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> [eblake: rebase to master] Signed-off-by: Eric Blake <eblake@redhat.com>
2018-02-26s390x: remove s390_get_memslot_countCornelia Huck
Not needed anymore after removal of the memory hotplug code. Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2018-02-26qmp: expose s390-specific CPU infoViktor Mihajlovski
Presently s390x is the only architecture not exposing specific CPU information via QMP query-cpus. Upstream discussion has shown that it could make sense to report the architecture specific CPU state, e.g. to detect that a CPU has been stopped. With this change the output of query-cpus will look like this on s390: [ {"arch": "s390", "current": true, "props": {"core-id": 0}, "cpu-state": "operating", "CPU": 0, "qom_path": "/machine/unattached/device[0]", "halted": false, "thread_id": 63115}, {"arch": "s390", "current": false, "props": {"core-id": 1}, "cpu-state": "stopped", "CPU": 1, "qom_path": "/machine/unattached/device[1]", "halted": true, "thread_id": 63116} ] This change doesn't add the s390-specific data to HMP 'info cpus'. A follow-on patch will remove all architecture specific information from there. Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <1518797321-28356-2-git-send-email-mihajlov@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2018-02-26s390x/cpu: expose the guest crash informationChristian Borntraeger
This patch is the s390 implementation of guest crash information, similar to commit d187e08dc4 ("i386/cpu: add crash-information QOM property") and the related commits. We will detect several crash reasons, with the "disabled wait" being the most important one, since this is used by all s390 guests as a "panic like" notification. Demonstrate these ways with examples as follows. 1. crash-information QOM property; Run qemu with -qmp unix:qmp-sock,server, then use utility "qmp-shell" to execute "qom-get" command, and might get the result like, (QEMU) (QEMU) qom-get path=/machine/unattached/device[0] \ property=crash-information {"return": {"core": 0, "reason": "disabled-wait", "psw-mask": 562956395872256, \ "type": "s390", "psw-addr": 1102832}} 2. GUEST_PANICKED event reporting; Run qemu with a socket option, and telnet or nc to that, -chardev socket,id=qmp,port=4444,host=localhost,server \ -mon chardev=qmp,mode=control,pretty=on \ Negotiating the mode by { "execute": "qmp_capabilities" }, and the crash information will be reported on a guest crash event like, { "timestamp": { "seconds": 1518004739, "microseconds": 552563 }, "event": "GUEST_PANICKED", "data": { "action": "pause", "info": { "core": 0, "psw-addr": 1102832, "reason": "disabled-wait", "psw-mask": 562956395872256, "type": "s390" } } } 3. log; Run qemu with the parameters: -D <logfile> -d guest_errors, to specify the logfile and log item. The results might be, Guest crashed on cpu 0: disabled-wait PSW: 0x0002000180000000 0x000000000010d3f0 Co-authored-by: Jing Liu <liujbjl@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Message-Id: <20180209122543.25755-1-borntraeger@de.ibm.com> Reviewed-by: Eric Blake <eblake@redhat.com> [CH: tweaked qapi comment] Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2018-02-19mem: add share parameter to memory-backend-ramMarcel Apfelbaum
Currently only file backed memory backend can be created with a "share" flag in order to allow sharing guest RAM with other processes in the host. Add the "share" flag also to RAM Memory Backend in order to allow remapping parts of the guest RAM to different host virtual addresses. This is needed by the RDMA devices in order to remap non-contiguous QEMU virtual addresses to a contiguous virtual address range. Moved the "share" flag to the Host Memory base class, modified phys_mem_alloc to include the new parameter and a new interface memory_region_init_ram_shared_nomigrate. There are no functional changes if the new flag is not used. Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
2018-02-09Merge remote-tracking branch 'remotes/armbru/tags/pull-misc-2018-02-07-v4' ↵Peter Maydell
into staging Miscellaneous patches for 2018-02-07 # gpg: Signature made Fri 09 Feb 2018 12:52:51 GMT # gpg: using RSA key 3870B400EB918653 # gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" # gpg: aka "Markus Armbruster <armbru@pond.sub.org>" # Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653 * remotes/armbru/tags/pull-misc-2018-02-07-v4: Move include qemu/option.h from qemu-common.h to actual users Drop superfluous includes of qapi/qmp/qjson.h Drop superfluous includes of qapi/qmp/dispatch.h Include qapi/qmp/qnull.h exactly where needed Include qapi/qmp/qnum.h exactly where needed Include qapi/qmp/qbool.h exactly where needed Include qapi/qmp/qstring.h exactly where needed Include qapi/qmp/qdict.h exactly where needed Include qapi/qmp/qlist.h exactly where needed Include qapi/qmp/qobject.h exactly where needed qdict qlist: Make most helper macros functions Eliminate qapi/qmp/types.h Typedef the subtypes of QObject in qemu/typedefs.h, too Include qmp-commands.h exactly where needed Drop superfluous includes of qapi/qmp/qerror.h Include qapi/error.h exactly where needed Drop superfluous includes of qapi-types.h and test-qapi-types.h Clean up includes Use #include "..." for our own headers, <...> for others vnc: use stubs for CONFIG_VNC=n dummy functions Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-02-09Drop superfluous includes of qapi/qmp/qjson.hMarkus Armbruster
Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180201111846.21846-19-armbru@redhat.com>
2018-02-09Include qapi/error.h exactly where neededMarkus Armbruster
This cleanup makes the number of objects depending on qapi/error.h drop from 1910 (out of 4743) to 1612 in my "build everything" tree. While there, separate #include from file comment with a blank line, and drop a useless comment on why qemu/osdep.h is included first. Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180201111846.21846-5-armbru@redhat.com> [Semantic conflict with commit 34e304e975 resolved, OSX breakage fixed]
generated by cgit v1.2.3 (git 2.25.1) at 2024-05-15 16:39:12 +0000