| Age | Commit message (Collapse) | Author |
|---|
|
As Nathan pointed out correctly, the mtmsr instruction does not modify
the high 32 bits of MSR. It also doesn't matter if SF is set or not,
the instruction always behaves the same.
This patch moves it a bit closer to the spec.
Reported-by: Nathan Whitehorn <nwhitehorn@freebsd.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
On at least the PowerPC 601, a direct-store (T=1) with bus unit ID 0x07F
is special-cased as memory-forced I/O controller access. It is supposed
to be checked immediately if T=1, bypassing all protection mechanisms
and acting cache-inhibited and global.
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Simplified by avoiding reindentation. Added explanatory comments.
Cc: Alexander Graf <agraf@suse.de>
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
This patch removes all references to signal.h when qemu-common.h is included
as they become redundant.
Signed-off-by: Alexandre Raymond <cerbere@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
|
|
* 'ppc-next' of git://repo.or.cz/qemu/agraf:
PPC: fix mpc8544ds pci default devices
Fix segfault on screendump with -nographic
PPC: install mpc8544ds.dtb
PPC: fix sregs usage on booke
ppc: Fix compilation for ppc64-softmmu
|
|
target-ppc has been switched to softfloat only long ago, but a
few #ifdef CONFIG_SOFTFLOAT have been forgotten. Remove them.
Cc: Alexander Graf <agraf@suse.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
|
|
When compiling qemu with kvm support on BookE PPC machines, I get
the following error:
cc1: warnings being treated as errors
/tmp/qemu/target-ppc/kvm.c: In function 'kvm_arch_get_registers':
/tmp/qemu/target-ppc/kvm.c:188: error: unused variable 'sregs'
This is due to overly ambitious #ifdef'ery introduced in 90dc88.
Fix it by keeping code that doesn't depend on new headers alive
for the compiler, but never executed due to failing capability
checks.
CC: Scott Wood <scottwood@freescale.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
When QEMU was configured with --enable-debug-tcg,
compilation fails in spr_write_booke206_mmucsr0() and in
spr_write_booke_pid(). Similar changes are also needed
in conditional code which is normally unused.
Cc: Alexander Graf <agraf@suse.de>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
* 'trivial-patches' of git://repo.or.cz/qemu/stefanha:
Fix typos in comments (chek -> check)
hw/sd.c: Don't complain about SDIO commands CMD52/CMD53
hw/realview.c: Remove duplicate #include line
piix_pci: fix piix3_set_irq_pic()
|
|
* 'ppc-next' of git://repo.or.cz/qemu/agraf:
Fix a bug in mtsr/mtsrin emulation on ppc64
pSeries: Clean up write-only variables
w32: Fix compilation and replace non-portable usage of ulong
|
|
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
|
|
tb_invalidate_page_range() was intended to be used to invalidate an
area of a TB which the guest explicitly flushes from i-cache. However,
QEMU detects writes to code areas where TBs have been generated, so
his has never been useful.
Delete the function, adjust callers.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
Early ppc64 CPUs include a hack to partially simulate the ppc32 segment
registers, by translating writes to them into writes to the SLB. This is
not used by any current Linux kernel, but it is used by the openbios used
in the qemu mac99 model.
Commit 81762d6dd0d430d87024f2c83e9c4dcc4329fb7d, cleaning up the SLB
handling introduced a bug in this code, breaking the openbios currently in
qemu. Specifically, there was an off by one error bitshuffling the
register format used by mtsr into the format needed for the SLB load,
causing the flag bits to end up in the wrong place. This caused the
storage keys to be wrong under openbios, meaning that the translation code
incorrectly thought a legitimate access was a permission violation.
This patch fixes the bug, at the same time it fixes some build bug in the
MMU debugging code (only exposed when DEBUG_MMU is enabled).
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
ulong is undefined for w32 (and maybe other) compilations.
Replace it by uintptr_t (which also fixes compilation for w64
and is a better choice for pointer to integer conversions).
Cc: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
* 'ppc-next' of git://repo.or.cz/qemu/agraf:
PPC: Qdev'ify e500 pci
PPC MPC7544DS: Use new TLB helper function
PPC: Implement e500 (FSL) MMU
PPC: Add another 64 bits to instruction feature mask
PPC: Add GS MSR definition
PPC: Make MPC8544DS emulation work w/o KVM
PPC: Make MPC8544DS obey -cpu switch
Fix off-by-one error in sizing pSeries hcall table
ppc64: Fix out-of-tree builds
kvm: ppc: warn user on PAGE_SIZE mismatch
kvm: ppc: detect old headers
monitor: add PPC BookE SPRs
kvm: ppc: fixes for KVM_SET_SREGS on init
ppc64: Don't try to build sPAPR RTAS on Darwin
Place pseries vty devices at addresses more similar to existing machines
Make pSeries 'model' property more closely resemble real hardware
pseries: Increase maximum CPUs to 256
|
|
Most of the code to support e500 style MMUs is already in place, but
we're missing on some of the special TLB0-TLB1 handling code and slightly
different TLB modification.
This patch adds support for the FSL style MMU.
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
To enable quick runtime detection of instruction groups to the currently
selected CPU emulation, we have a feature mask of what exactly the respective
instruction supports.
This feature mask is 64 bits long and we just successfully exceeded those 64
bits. To add more features, we need to think of something.
The easiest solution that came to my mind was to simply add another 64 bits
that we can also match on. Since the comparison is only done on start of the
qemu process to generate an internal opcode calling table, we should be fine
on any performance penalties here.
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
The BookE specification defines MSR bit 28 as Guest State. Add it
to the list of MSR macros.
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
When compiling Qemu with older kernel headers, the PVR setting
mechanism isn't available yet. Unfortunately, back then I didn't add
a capability we could check against, so all we can do is add a configure
test to see if we support PVR setting. For BookE, we don't care yet.
This fixes compilation errors with KVM enabled on older kernel headers
(like 2.6.32).
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
Read them via KVM_GET_SREGS in kvm_arch_get_registers(),
and display them in "info registers".
Also get CR and PID from the existing KVM_GET_REGS.
Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
Classic/server ppc has had SREGS for a while now (though I think not
always?), but it's still missing for booke. Check the capability before
calling KVM_SET_SREGS.
Without this, booke kvm fails to boot as of commit
84b4915dd2c0eaa86c970ffc42a68ea8ba9e48b5 (kvm: Handle kvm_init_vcpu
errors).
Also, don't write random stack state into the non-PVR sregs fields --
have kvm fill it in first.
Eventually booke will have sregs and it will have its own capability to
be tested here. However, we will want a way for platform code to request
to look like the actual CPU we're running on, especially if SoC devices
are being directly assigned.
Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
|
|
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
|
|
The previous patch removed the need for parameter puc.
Is is now unused, so remove it.
Cc: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
|
|
Function gen_pc_load was introduced in commit
d2856f1ad4c259e5766847c49acbb4e390731bd4.
The only reason for parameter searched_pc was
a debug statement in target-i386/translate.c.
Parameter puc was needed by target-sparc until
commit d7da2a10402f1644128b66414ca8f86bdea9ae7c.
Remove searched_pc from the debug statement and remove both
parameters from the parameter list of gen_pc_load.
As the function name gen_pc_load was also misleading,
it is now called restore_state_to_opc. This new name
was suggested by Peter Maydell, thanks.
v2: Remove last parameter, too, and rename the function.
v3: Fix [] typo in target-arm/translate.c.
Fix wrong SHA1 object name in commit message (copy+paste error).
Cc: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
|
|
efstst*() functions are fast SPE funtions which do not take into account
special values (infinites, NaN, etc.), while efscmp*() functions are
IEEE754 compliant.
Given that float32_*() functions are IEEE754 compliant, the efscmp*()
functions are correctly implemented, while efstst*() are not. This
patch reverse the implementation of this two groups of functions and
fix the comments. It also use float32_eq() instead of float32_eq_quiet()
as qNaNs should not be ignored.
Cc: Alexander Graf <agraf@suse.de>
Cc: Nathan Froyd <froydnj@codesourcery.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
|
|
float*_eq functions have a different semantics than other comparison
functions. Fix that by first renaming float*_quiet() into float*_eq_quiet().
Note that it is purely mechanical, and the behaviour should be unchanged.
That said it clearly highlight problems due to this different semantics,
they are fixed later in this patch series.
Cc: Alexander Graf <agraf@suse.de>
Acked-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
|
|
Now that PPC defaults to softfloat which always provides float128
support, there is no need to keep two version of the code, depending if
float128 support is available or not. Suggested by Peter Maydell.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
|
|
tcg_gen_exit_tb takes a parameter of type tcg_target_long,
so the type casts of pointer to long should be replaced by
type casts of pointer to tcg_target_long (suggested by Blue Swirl).
These changes are needed for build environments where
sizeof(long) != sizeof(void *), especially for w64.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
|
|
When configured with --enable-debug, we compile without optimization.
This means that the function mpc8544_copy_soc_cell() in ppce500_mpc8544ds.c
is not optimized out, even though it is never called without kvm. That in
turn causes a link failure, because it calls the function
kvmppc_read_host_property() which is in kvm_ppc.o and therefore not
included in a --disable-kvm build.
This patch fixes the problem by providing a dummy stub for
kvmppc_read_host_property() in kvm_ppc.h when !CONFIG_KVM.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
The recent patches adding partial support for POWER7 cpu emulation included
implementing the popcntd instruction. The support for this was open coded,
but host-utils.h already included a function implementing an equivalent
population count function, which uses a gcc builtin (which can use special
host instructions) if available.
This patch makes the popcntd implementation use the existing, potentially
faster, implementation.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
Shared-processor partitions are those where a CPU is time-sliced between
partitions, rather than being permanently dedicated to a single
partition. qemu emulated partitions, since they are just scheduled with
the qemu user process, behave mostly like shared processor partitions.
In order to better support shared processor partitions (splpar), PAPR
defines the "VPA" (Virtual Processor Area), a shared memory communication
channel between the hypervisor and partitions. There are also two
additional shared memory communication areas for specialized purposes
associated with the VPA.
A VPA is not essential for operating an splpar, though it can be necessary
for obtaining accurate performance measurements in the presence of
runtime partition switching.
Most importantly, however, the VPA is a prerequisite for PAPR's H_CEDE,
hypercall, which allows a partition OS to give up it's shared processor
timeslices to other partitions when idle.
This patch implements the VPA and H_CEDE hypercalls in qemu. We don't
implement any of the more advanced statistics which can be communicated
through the VPA. However, this is enough to make normal pSeries kernels
do an effective power-save idle on an emulated pSeries, significantly
reducing the host load of a qemu emulated pSeries running an idle guest OS.
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
This patch implements the infrastructure and hypercalls necessary for the
PAPR specified CRQ (Command Request Queue) mechanism. This general
request queueing system is used by many of the PAPR virtual IO devices,
including the virtual scsi adapter.
Signed-off-by: Ben Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
On pSeries logical partitions, excepting the old POWER4-style full system
partitions, the guest does not have direct access to the hardware page
table. Instead, the pagetable exists in hypervisor memory, and the guest
must manipulate it with hypercalls.
However, our current pSeries emulation more closely resembles the old
style where the guest must set up and handle the pagetables itself. This
patch converts it to act like a modern partition.
This involves two things: first, the hash translation path is modified to
permit the has table to be stored externally to the emulated machine's
RAM. The pSeries machine init code configures the CPUs to use this mode.
Secondly, we emulate the PAPR hypercalls for manipulating the external
hashed page table.
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
This adds emulation support for the recent POWER7 cpu to qemu. It's far
from perfect - it's missing a number of POWER7 features so far, including
any support for VSX or decimal floating point instructions. However, it's
close enough to boot a kernel with the POWER7 PVR.
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
Traditionally, the "segments" used for the two-stage translation used on
powerpc MMUs were 256MB in size. This was the only option on all hash
page table based 32-bit powerpc cpus, and on the earlier 64-bit hash page
table based cpus. However, newer 64-bit cpus also permit 1TB segments
This patch adds support for 1TB segment translation to the qemu code.
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
Currently the path handling hash page table translation in get_segment()
has a mix of common and 32 or 64 bit specific code. However the
division is not done terribly well which results in a lot of messy code
flipping between common and divided paths.
This patch improves the organization, consolidating several divided paths
into one. This in turn allows simplification of some code in
get_segment(), removing a number of ugly interim variables.
This new factorization will also make it easier to add support for the 1T
segments added in newer CPUs.
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
Currently, get_segment() has a variable called hash. However it doesn't
(quite) get the hash value for the ppc hashed page table. Instead it
gets the hash shifted - effectively the offset of the hash bucket within
the hash page table.
As well, as being different to the normal use of plain "hash" in the
architecture documentation, this usage necessitates some awkward 32/64
dependent masks and shifts which clutter up the path in get_segment().
This patch alters the code to use raw hash values through get_segment()
including storing raw hashes instead of pte group offsets in the ctx
structure. This cleans up the path noticeably.
This does necessitate 32/64 dependent shifts when the hash values are
taken out of the ctx structure and used, but those paths already have
32/64 bit variants so this is less awkward than it was in get_segment().
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
On ppc machines with hash table MMUs, the special purpose register SDR1
contains both the base address of the encoded size (hashed) page tables.
At present, we interpret the SDR1 value within the address translation
path. But because the encodings of the size for 32-bit and 64-bit are
different this makes for a confusing branch on the MMU type with a bunch
of curly shifts and masks in the middle of the translate path.
This patch cleans things up by moving the interpretation on SDR1 into the
helper function handling the write to the register. This leaves a simple
pre-sanitized base address and mask for the hash table in the CPUState
structure which is easier to work with in the translation path.
This makes the translation path more readable. It addresses the FIXME
comment currently in the mtsdr1 helper, by validating the SDR1 value during
interpretation. Finally it opens the way for emulating a pSeries-style
partition where the hash table used for translation is not mapped into
the guests's RAM.
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
The slb_lookup() function, used in the ppc translation path returns a
number of slb entry fields in reference parameters. However, only one
of the two callers of slb_lookup() actually wants this information.
This patch, therefore, makes slb_lookup() return a simple pointer to the
located SLB entry (or NULL), and the caller which needs the fields can
extract them itself.
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
qemu already includes support for the popcntb instruction introduced
in POWER5 (although it doesn't actually allow you to choose POWER5).
However, the logic is slightly incorrect: it will generate results
truncated to 32-bits when the CPU is in 32-bit mode. This is not
normal for powerpc - generally arithmetic instructions on a 64-bit
powerpc cpu will generate full 64 bit results, it's just that only the
low 32 bits will be significant for condition codes.
This patch corrects this nit, which actually simplifies the code slightly.
In addition, this patch implements the popcntw and popcntd
instructions added in POWER7, in preparation for allowing POWER7 as an
emulated CPU.
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
The PURR (Processor Utilization Resource Register) is a register found
on recent POWER CPUs. The guts of implementing it at least enough to
get by are already present in qemu, however some of the helper
functions needed to actually wire it up are missing.
This patch adds the necessary glue, so that the PURR can be wired up
when we implement newer POWER CPU targets which include it.
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
For a 64-bit PowerPC target, qemu correctly implements translation
through the segment lookaside buffer. Likewise it supports the
slbmte instruction which is used to load entries into the SLB.
However, it does not emulate the slbmfee and slbmfev instructions
which read SLB entries back into registers. Because these are
only occasionally used in guests (mostly for debugging) we get
away with it.
However, given the recent SLB cleanups, it becomes quite easy to
implement these, and thereby allow, amongst other things, a guest
Linux to use xmon's command to dump the SLB.
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
PowerPC and POWER chips since the POWER4 and 970 have a special
hypervisor mode, and a corresponding form of the system call
instruction which traps to the hypervisor.
qemu currently has stub implementations of hypervisor mode. That
is, the outline is there to allow qemu to run a PowerPC hypervisor
under emulation. There are a number of details missing so this
won't actually work at present, but the idea is there.
What there is no provision at all, is for qemu to instead emulate
the hypervisor itself. That is to have hypercalls trap into qemu
and their result be emulated from qemu, rather than running
hypervisor code within the emulated system.
Hypervisor hardware aware KVM implementations are in the works and
it would be useful for debugging and development to also allow
full emulation of the same para-virtualized guests as such a KVM.
Therefore, this patch adds a hook which will allow a machine to
set up emulation of hypervisor calls.
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
Currently the SLB information when emulating a PowerPC 970 is
storeed in a structure with the unhelpfully named fields 'tmp'
and 'tmp64'. While the layout in these fields does match the
description of the SLB in the architecture document, it is not
convenient either for looking up the SLB, or for emulating the
slbmte instruction.
This patch, therefore, reorganizes the SLB entry structure to be
divided in the the "ESID related" and "VSID related" fields as
they are divided in instructions accessing the SLB.
In addition to making the code smaller and more readable, this will
make it easier to implement for the 1TB segments used in more
recent PowerPC chips.
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
Cc: Alexander Graf <agraf@suse.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
Add support for 6 SPE instructions: evmra, evmwsmi{a{a}}, evmwumi{a{a}}
Signed-off-by: Fabien Chouteau <chouteau@adacore.com>
Reviewed-by: Nathan Froyd <froydnj@codesourcery.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
|
|
|
|
This was done with:
sed -i 's/qemu_get_clock\>/qemu_get_clock_ns/' \
$(git grep -l 'qemu_get_clock\>' )
sed -i 's/qemu_new_timer\>/qemu_new_timer_ns/' \
$(git grep -l 'qemu_new_timer\>' )
after checking that get_clock and new_timer never occur twice
on the same line. There were no missed occurrences; however, even
if there had been, they would have been caught by the compiler.
There was exactly one false positive in qemu_run_timers:
- current_time = qemu_get_clock (clock);
+ current_time = qemu_get_clock_ns (clock);
which is of course not in this patch.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Make the return code of kvm_arch_handle_exit directly usable for
kvm_cpu_exec. This is straightforward for x86 and ppc, just s390
would require more work. Avoid this for now by pushing the return code
translation logic into s390's kvm_arch_handle_exit.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
CC: Alexander Graf <agraf@suse.de>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
|
|
We will broaden the scope of this function on x86 beyond irqchip events.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
|
