| Age | Commit message (Collapse) | Author |
|---|
|
Altivec instructions are not working anymore in PowerPC emulation,
following commit d15f74fb, which inverted two registers in the call
to helper. Fix that.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Acked-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
|
|
The order of the arguments was wrong (copy+paste error).
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
The BookE variant of MSR_SF is MSR_CM. Implement everything it takes in TCG to
support running 64bit code with MSR_CM set.
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
Add an explicit CPUPPCState parameter instead of relying on AREG0
and rename op_helper.c (which only contains load and store helpers)
to mem_helper.c. Remove AREG0 swapping in
tlb_fill().
Switch to AREG0 free mode. Use cpu_ld{l,uw}_code in translation
and interrupt handling, cpu_{ld,st}{l,uw}_data in loads and stores.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
Add an explicit CPUPPCState parameter instead of relying on AREG0.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
Add an explicit CPUPPCState parameter instead of relying on AREG0.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
Add an explicit CPUPPCState parameter instead of relying on AREG0.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
Add an explicit CPUPPCState parameter instead of relying on AREG0.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
[fix unwanted whitespace line in Makefile.target]
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
Add an explicit CPUPPCState parameter instead of relying on AREG0.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
Add an explicit CPUPPCState parameter instead of relying on AREG0.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
Move code from cpu_state_reset() into ppc_cpu_reset().
Reorder #include of helper_regs.h to use it in translate_init.c.
Adjust whitespace and add braces.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
|
|
When we dump the CPU registers, there's a certain chance they haven't been
synchronized with KVM yet, so we have to manually trigger that.
This aligns the code with x86 and fixes a bug where the register state was
bogus on invalid/unknown kvm exit reasons.
Reported-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
These instructions for loading and storing byte-swapped 64-bit values have
been introduced in PowerISA 2.06.
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
Scripted conversion:
sed -i "s/CPUState/CPUPPCState/g" target-ppc/*.[hc]
sed -i "s/#define CPUPPCState/#define CPUState/" target-ppc/cpu.h
Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Remove some include statements which are not needed.
Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
|
|
This patch implements the msgsnd instruction. It is part of the
Embedded.Processor Control specification and allows one CPU to
IPI another CPU without going through an interrupt controller.
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
This patch implements the msgclr instruction. It is part of the
Embedded.Processor Control specification and clears pending doorbell
interrupts on the current CPU.
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
Our internal helpers to fetch TLB entries were not able to tell us
that an entry doesn't even exist. Pass an error out if we hit such
a case to not accidently pass beyond the TLB array.
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
The PowerPC 2.06 BookE ISA defines an opcode called "tlbilx" which is used
to flush TLB entries. It's the recommended way of flushing in virtualized
environments.
So far we got away without implementing it, but Linux for e500mc uses this
instruction, so we better add it :).
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
The msync instruction as defined today is only valid on 4xx cores, not
on e500 which also supports msync, but treats it the same way as sync.
Rename it to reflect that it's 4xx only.
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
The e500 CPUs don't use 440's msync which falls on the same opcode IDs,
but instead use the real powerpc sync instruction. This is important,
since the invalid mask differs between the two.
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
When using gdb to single step a ppc interrupt routine, the execution
flow passes the rfi instruction without actually returning from the
interrupt.
The patch fixes this by avoiding to update the nip when the debug
exception is raised and a previous POWERPC_EXCP_SYNC was set.
The latter is the case only, if code for rfi or a related instruction
was generated.
Signed-off-by: Sebastian Bauer <mail@sebastianbauer.info>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
SPE instructions are defined by pairs. Currently, the invalid-bits mask is set
for the first instruction, but the second one can have a different mask.
example:
GEN_SPE(efdcmpeq, efdcfs, 0x17, 0x0B, 0x00600000, 0x00180000, PPC_SPE_DOUBLE),
Signed-off-by: Fabien Chouteau <chouteau@adacore.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
This patch implements support for the CFAR SPR on POWER7 (Come From
Address Register), which snapshots the PC value at the time of a branch or
an rfid. The latest powerpc-next kernel also catches it and can show it in
xmon or in the signal frames.
This works well enough to let recent kernels boot (which otherwise oops
on the CFAR access). It hasn't been tested enough to be confident that the
CFAR values are actually accurate, but one thing at a time.
Signed-off-by: Ben Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
When accessing an SPE instruction despite it being not available,
throw an SPE exception instead of an APU exception. That way the
guest knows what's going on and actually uses SPE.
Reported-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
|
|
* 'ppc-next' of git://repo.or.cz/qemu/agraf:
PPC: move TLBs to their own arrays
PPC: 440: Use 440 style MMU as default, so Qemu knows the MMU type
PPC: E500: Use MAS registers instead of internal TLB representation
PPC: Only set lower 32bits with mtmsr
PPC: update openbios firmware
PPC: mpc8544ds: Add hypervisor node
PPC: calculate kernel,initrd,cmdline locations dynamically
target-ppc: Handle memory-forced I/O controller access
PPC: E500: Implement reboot controller
|
|
Most exec-all.h include directives are now useless, remove them.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
As Nathan pointed out correctly, the mtmsr instruction does not modify
the high 32 bits of MSR. It also doesn't matter if SF is set or not,
the instruction always behaves the same.
This patch moves it a bit closer to the spec.
Reported-by: Nathan Whitehorn <nwhitehorn@freebsd.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
target-ppc has been switched to softfloat only long ago, but a
few #ifdef CONFIG_SOFTFLOAT have been forgotten. Remove them.
Cc: Alexander Graf <agraf@suse.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
|
|
Most of the code to support e500 style MMUs is already in place, but
we're missing on some of the special TLB0-TLB1 handling code and slightly
different TLB modification.
This patch adds support for the FSL style MMU.
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
To enable quick runtime detection of instruction groups to the currently
selected CPU emulation, we have a feature mask of what exactly the respective
instruction supports.
This feature mask is 64 bits long and we just successfully exceeded those 64
bits. To add more features, we need to think of something.
The easiest solution that came to my mind was to simply add another 64 bits
that we can also match on. Since the comparison is only done on start of the
qemu process to generate an internal opcode calling table, we should be fine
on any performance penalties here.
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
Read them via KVM_GET_SREGS in kvm_arch_get_registers(),
and display them in "info registers".
Also get CR and PID from the existing KVM_GET_REGS.
Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
Function gen_pc_load was introduced in commit
d2856f1ad4c259e5766847c49acbb4e390731bd4.
The only reason for parameter searched_pc was
a debug statement in target-i386/translate.c.
Parameter puc was needed by target-sparc until
commit d7da2a10402f1644128b66414ca8f86bdea9ae7c.
Remove searched_pc from the debug statement and remove both
parameters from the parameter list of gen_pc_load.
As the function name gen_pc_load was also misleading,
it is now called restore_state_to_opc. This new name
was suggested by Peter Maydell, thanks.
v2: Remove last parameter, too, and rename the function.
v3: Fix [] typo in target-arm/translate.c.
Fix wrong SHA1 object name in commit message (copy+paste error).
Cc: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
|
|
tcg_gen_exit_tb takes a parameter of type tcg_target_long,
so the type casts of pointer to long should be replaced by
type casts of pointer to tcg_target_long (suggested by Blue Swirl).
These changes are needed for build environments where
sizeof(long) != sizeof(void *), especially for w64.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
|
|
On ppc machines with hash table MMUs, the special purpose register SDR1
contains both the base address of the encoded size (hashed) page tables.
At present, we interpret the SDR1 value within the address translation
path. But because the encodings of the size for 32-bit and 64-bit are
different this makes for a confusing branch on the MMU type with a bunch
of curly shifts and masks in the middle of the translate path.
This patch cleans things up by moving the interpretation on SDR1 into the
helper function handling the write to the register. This leaves a simple
pre-sanitized base address and mask for the hash table in the CPUState
structure which is easier to work with in the translation path.
This makes the translation path more readable. It addresses the FIXME
comment currently in the mtsdr1 helper, by validating the SDR1 value during
interpretation. Finally it opens the way for emulating a pSeries-style
partition where the hash table used for translation is not mapped into
the guests's RAM.
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
qemu already includes support for the popcntb instruction introduced
in POWER5 (although it doesn't actually allow you to choose POWER5).
However, the logic is slightly incorrect: it will generate results
truncated to 32-bits when the CPU is in 32-bit mode. This is not
normal for powerpc - generally arithmetic instructions on a 64-bit
powerpc cpu will generate full 64 bit results, it's just that only the
low 32 bits will be significant for condition codes.
This patch corrects this nit, which actually simplifies the code slightly.
In addition, this patch implements the popcntw and popcntd
instructions added in POWER7, in preparation for allowing POWER7 as an
emulated CPU.
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
For a 64-bit PowerPC target, qemu correctly implements translation
through the segment lookaside buffer. Likewise it supports the
slbmte instruction which is used to load entries into the SLB.
However, it does not emulate the slbmfee and slbmfev instructions
which read SLB entries back into registers. Because these are
only occasionally used in guests (mostly for debugging) we get
away with it.
However, given the recent SLB cleanups, it becomes quite easy to
implement these, and thereby allow, amongst other things, a guest
Linux to use xmon's command to dump the SLB.
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
Cc: Alexander Graf <agraf@suse.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
Add support for 6 SPE instructions: evmra, evmwsmi{a{a}}, evmwumi{a{a}}
Signed-off-by: Fabien Chouteau <chouteau@adacore.com>
Reviewed-by: Nathan Froyd <froydnj@codesourcery.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
|
|
Call the tlb read helper (and not the write helper) for tlb
reads.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
|
|
Signed-off-by: Mike Pall <mike-lp10@luajit.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
|
|
fprintf_function uses format checking with GCC_FMT_ATTR.
Format errors were fixed in
* target-i386/helper.c
* target-mips/translate.c
* target-ppc/translate.c
Cc: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
The lwarx and ldarx instructions have a bit to give some hint to the
CPU which is safe to ignore. We currently refuse to accept any instruction
with that bit set, as it used to be declared MBZ.
Let's remove the reserved bit and make the instruction work as expected.
This fixes Linux boot for ppc64.
Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Andreas Färber <andreas.faerber@web.de>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
|
|
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
|
|
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
Logging for -d cpu is done in generic code.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
|
|
Value stored is never read.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
Fixes clang errors:
CC ppc-softmmu/translate.o
/src/qemu/target-ppc/translate.c:3748:13: error: comparison of distinct pointer types ('void (*)(void *, int, int)' and 'void *')
if (likely(read_cb != SPR_NOACCESS)) {
/src/qemu/target-ppc/translate.c:3748:28: note: instantiated from:
if (likely(read_cb != SPR_NOACCESS)) {
/src/qemu/target-ppc/translate.c:3903:13: error: comparison of distinct pointer types ('void (*)(void *, int, int)' and 'void *')
if (likely(write_cb != SPR_NOACCESS)) {
/src/qemu/target-ppc/translate.c:3903:29: note: instantiated from:
if (likely(write_cb != SPR_NOACCESS)) {
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
|
|
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
|
