aboutsummaryrefslogtreecommitdiff
path: root/target-ppc/machine.c
AgeCommit message (Collapse)Author
2013-10-25target-ppc: Use #define for max slb entriesAneesh Kumar K.V
Instead of opencoding 64 use MAX_SLB_ENTRIES. We don't update the kernel header here. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-07-29target-ppc: Convert ppc cpu savevm to VMStateDescriptionAlexey Kardashevskiy
The savevm code for the powerpc cpu emulation is currently based around the old register_savevm() rather than register_vmstate() method. It's also rather broken, missing some important state on some CPU models. This patch completely rewrites the savevm for target-ppc, using the new VMStateDescription approach. Exactly what needs to be saved in what configurations has been more carefully examined, too. This introduces a new version (5) of the cpu save format. The old load function is retained to support version 4 images. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Message-id: 1374175984-8930-2-git-send-email-aliguori@us.ibm.com [aik: ppc cpu savevm convertion fixed to use PowerPCCPU instead of CPUPPCState] Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-26PPC: Remove env->hreset_excp_prefixFabien Chouteau
This value is not needed if we use correctly the MSR[IP] bit. excp_prefix is always 0x00000000, except when the MSR[IP] bit is implemented and set to 1, in that case excp_prefix is 0xfff00000. The handling of MSR[IP] was already implemented but not used at reset because the value of env->msr was changed "manually". The patch uses the function hreg_store_msr() to set env->msr, this ensures a good handling of MSR[IP] at reset, and therefore a good value for excp_prefix. Signed-off-by: Fabien Chouteau <chouteau@adacore.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-03-22target-ppc: Remove vestigial PowerPC 620 supportDavid Gibson
The PowerPC 620 was the very first 64-bit PowerPC implementation, but hardly anyone ever actually used the chips. qemu notionally supports the 620, but since we don't actually have code to implement the segment table, the support is broken (quite likely in other ways too). This patch, therefore, removes all remaining pieces of 620 support, to stop it cluttering up the platforms we actually care about. This includes removing support for the ASR register, used only on segment table based machines. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-02-23target-ppc: Split out SO, OV, CA fields from XERRichard Henderson
In preparation for more efficient setting of these fields. Cc: Alexander Graf <agraf@suse.de> Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-12-19softmmu: move include files to include/sysemu/Paolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-11-01target-ppc: Extend FPU state for newer POWER CPUsDavid Gibson
This patch adds some extra FPU state to CPUPPCState. Specifically, fpscr is extended to a target_ulong bits, since some recent (64 bit) CPUs now have more status bits than fit inside 32 bits. Also, we add the 32 VSR registers present on CPUs with VSX (these extend the standard FP regs, which together with the Altivec/VMX registers form a 64 x 128bit register file for VSX). We don't actually support the instructions using these extra registers in TCG yet, but we still need a place to store the state so we can sync it with KVM and savevm/loadvm it. This patch updates the savevm code to not fail on the extended state, but also does not actually save it - that's a project for another patch. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Alexander Graf <agraf@suse.de>
2012-10-04target-ppc: Remove unused power_mode field from cpu stateDavid Gibson
CPUPPCState includes a variable 'power_mode' which is used nowhere. This patch removes it. This includes saving a dummy zero in its place during vmsave, to avoid breaking the save format. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Alexander Graf <agraf@suse.de>
2012-04-15target-ppc/machine.c: Drop unnecessary ifdefsJuan Quintela
machine.c is only compiled for softmmu targets, so checks for !defined(CONFIG_USER_ONLY) are unnecessary and can be dropped. Signed-off-by: Juan Quintela <quintela@redhat.com> [AF: Use more verbose commit message suggested by PMM] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Andreas Färber <afaerber@suse.de>
2012-03-14target-ppc: Don't overuse CPUStateAndreas Färber
Scripted conversion: sed -i "s/CPUState/CPUPPCState/g" target-ppc/*.[hc] sed -i "s/#define CPUPPCState/#define CPUState/" target-ppc/cpu.h Signed-off-by: Andreas Färber <afaerber@suse.de> Acked-by: Anthony Liguori <aliguori@us.ibm.com>
2011-06-17PPC: move TLBs to their own arraysAlexander Graf
Until now, we've created a union over multiple different TLB types and allocated that union. While it's a waste of memory (and cache) to allocate TLB information for a TLB type with much information when you only need little, it also inflicts another issue. With the new KVM API, we can now share the TLB between KVM and qemu, but for that to work we need to have both be in the same layout. We can't just stretch it over to fit some internal different TLB representation. Hence this patch moves all TLB types to their own array, allowing us to only address and allocate exactly the boundaries required for the specific TLB type at hand. Signed-off-by: Alexander Graf <agraf@suse.de>
2011-04-01Parse SDR1 on mtspr instead of at translate timeDavid Gibson
On ppc machines with hash table MMUs, the special purpose register SDR1 contains both the base address of the encoded size (hashed) page tables. At present, we interpret the SDR1 value within the address translation path. But because the encodings of the size for 32-bit and 64-bit are different this makes for a confusing branch on the MMU type with a bunch of curly shifts and masks in the middle of the translate path. This patch cleans things up by moving the interpretation on SDR1 into the helper function handling the write to the register. This leaves a simple pre-sanitized base address and mask for the hash table in the CPUState structure which is easier to work with in the translation path. This makes the translation path more readable. It addresses the FIXME comment currently in the mtsdr1 helper, by validating the SDR1 value during interpretation. Finally it opens the way for emulating a pSeries-style partition where the hash table used for translation is not mapped into the guests's RAM. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2010-03-04KVM: Rework VCPU state writeback APIJan Kiszka
This grand cleanup drops all reset and vmsave/load related synchronization points in favor of four(!) generic hooks: - cpu_synchronize_all_states in qemu_savevm_state_complete (initial sync from kernel before vmsave) - cpu_synchronize_all_post_init in qemu_loadvm_state (writeback after vmload) - cpu_synchronize_all_post_init in main after machine init - cpu_synchronize_all_post_reset in qemu_system_reset (writeback after system reset) These writeback points + the existing one of VCPU exec after cpu_synchronize_state map on three levels of writeback: - KVM_PUT_RUNTIME_STATE (during runtime, other VCPUs continue to run) - KVM_PUT_RESET_STATE (on synchronous system reset, all VCPUs stopped) - KVM_PUT_FULL_STATE (on init or vmload, all VCPUs stopped as well) This level is passed to the arch-specific VCPU state writing function that will decide which concrete substates need to be written. That way, no writer of load, save or reset functions that interact with in-kernel KVM states will ever have to worry about synchronization again. That also means that a lot of reasons for races, segfaults and deadlocks are eliminated. cpu_synchronize_state remains untouched, just as Anthony suggested. We continue to need it before reading or writing of VCPU states that are also tracked by in-kernel KVM subsystems. Consequently, this patch removes many cpu_synchronize_state calls that are now redundant, just like remaining explicit register syncs. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2009-08-27kvm: Simplify cpu_synchronize_state()Avi Kivity
cpu_synchronize_state() is a little unreadable since the 'modified' argument isn't self-explanatory. Simplify it by making it always synchronize the kernel state into qemu, and automatically flush the registers back to the kernel if they've been synchronized on this exit. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-03target-ppc: retain l{w,d}arx loaded valueNathan Froyd
We do this so we can check on the corresponding stc{w,d}x. whether the value has changed. It's a poor man's form of implementing atomic operations and is valid only for NPTL usermode Linux emulation. Signed-off-by: Nathan Froyd <froydnj@codesourcery.com> Signed-off-by: malc <av1474@comtv.ru>
2009-05-22kvm: Add missing bits to support live migrationJan Kiszka
This patch adds the missing hooks to allow live migration in KVM mode. It adds proper synchronization before/after saving/restoring the VCPU states (note: PPC is untested), hooks into cpu_physical_memory_set_dirty_tracking() to enable dirty memory logging at KVM level, and synchronizes that drity log into QEMU's view before running ram_live_save(). Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-05-21Convert machine registration to use module init functionsAnthony Liguori
This cleans up quite a lot of #ifdefs, extern variables, and other ugliness. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-04-28Fix PPC resetBlue Swirl
2009-03-02kvm/powerpc: Add MPC8544DS board supportaurel32
This patch add an emulation of MPC8544DS board. It can work on All E500 platforms. Signed-off-by: Liu Yu <yu.liu@freescale.com> Acked-by: Hollis Blanchard <hollisb@us.ibm.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6663 c046a42c-6fe2-441c-8c8c-71466251a162
2008-12-30VM load/save support for PPC CPUblueswir1
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6143 c046a42c-6fe2-441c-8c8c-71466251a162
2008-12-16target-ppc: IBM PowerPC 440EP Bamboo reference board emulationaurel32
Since most IO devices are integrated into the 440EP chip, "Bamboo support" mostly entails implementing the -kernel, -initrd, and -append options. These options are implemented by loading the guest as if u-boot had done it, i.e. loading a flat device tree, updating it to hold initrd addresses, ram size, and command line, and passing the FDT address in r3. Since we use it with KVM, we enable the virtio block driver and include hooks necessary for KVM support. Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6067 c046a42c-6fe2-441c-8c8c-71466251a162
2008-05-04remove target ifdefs from vl.caurel32
(Glauber Costa) git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4327 c046a42c-6fe2-441c-8c8c-71466251a162