aboutsummaryrefslogtreecommitdiff
path: root/spice-qemu-char.c
AgeCommit message (Collapse)Author
2013-12-16spice-char: implement chardev port eventMarc-André Lureau
Wire up chardev fe_event to Spice port. Signed-off-by: Marc-André Lureau <marcandre.lureau@gmail.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-12-16spice-char: remove unused fieldMarc-André Lureau
Signed-off-by: Marc-André Lureau <marcandre.lureau@gmail.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-06-10qemu-char: don't issue CHR_EVENT_OPEN in a BHMichael Roth
When CHR_EVENT_OPENED was initially added, it was CHR_EVENT_RESET, and it was issued as a bottom-half: 86e94dea5b740dad65446c857f6959eae43e0ba6 Which we basically used to print out a greeting/prompt for the monitor. AFAICT the only reason this was ever done in a BH was because in some cases we'd modify the chr_write handler for a new chardev backend *after* the site where we issued the reset (see: 86e94d:qemu_chr_open_stdio()) At some point this event was renamed to CHR_EVENT_OPENED, and we've maintained the use of this BH ever since. However, due to 9f939df955a4152aad69a19a77e0898631bb2c18, we schedule the BH via g_idle_add(), which is causing events to sometimes be delivered after we've already begun processing data from backends, leading to: known bugs: QMP: session negotation resets with OPENED event, in some cases this is causing new sessions to get sporadically reset potential bugs: hw/usb/redirect.c: can_read handler checks for dev->parser != NULL, which may be true if CLOSED BH has not been executed yet. In the past, OPENED quiesced outstanding CLOSED events prior to us reading client data. If it's delayed, our check may allow reads to occur even though we haven't processed the OPENED event yet, and when we do finally get the OPENED event, our state may get reset. qtest.c: can begin session before OPENED event is processed, leading to a spurious reset of the system and irq_levels gdbstub.c: may start a gdb session prior to the machine being paused To fix these, let's just drop the BH. Since the initial reasoning for using it still applies to an extent, work around that by deferring the delivery of CHR_EVENT_OPENED until after the chardevs have been fully initialized, toward the end of qmp_chardev_add() (or some cases, qemu_chr_new_from_opts()). This defers delivery long enough that we can be assured a CharDriverState is fully initialized before CHR_EVENT_OPENED is sent. Also, rather than requiring each chardev to do an explicit open, do it automatically, and allow the small few who don't desire such behavior to suppress the OPENED-on-init behavior by setting a 'explicit_be_open' flag. We additionally add missing OPENED events for stdio backends on w32, which were previously not being issued, causing us to not recieve the banner and initial prompts for qmp/hmp. Reported-by: Stefan Priebe <s.priebe@profihost.ag> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com> Message-id: 1370636393-21044-1-git-send-email-mdroth@linux.vnet.ibm.com Cc: qemu-stable@nongnu.org Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-16spice-qemu-char: vmc_write: Don't write more bytes then we're asked tooHans de Goede
This one took me eons to debug, but I've finally found it now, oh well. The usage of the MIN macro in this line: last_out = MIN(len, qemu_chr_be_can_write(scd->chr)); Causes qemu_chr_be_can_write to be called *twice*, since the MIN macro evaluates its arguments twice (bad MIN macro, bad!). And the result of the call can change between the 2 calls since the guest may have consumed some data from the virtio ringbuffer between the calls! When this happens it is possible for qemu_chr_be_can_write to return less then len in the call made for the comparision, and then to return more then len in the actual call for the return-value of MIN, after which we will end up writing len data + some extra garbage, not good. This patch fixes this by only calling qemu_chr_be_can_write once. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-04-16spice-qemu-char: Remove intermediate bufferAlon Levy
virtio-serial's buffer is valid when it calls us, and we don't access it otherwise: vmc_read is only called in response to wakeup, or else we set datalen=0 and throttle. Then vmc_read is called back, we return 0 (not accessing the buffer) and set the timer to unthrottle. Also make datalen int and not ssize_t (to fit spice_chr_write signature). HdG: Update to apply to spice-qemu-char with new gio-channel based flowcontrol support. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-04-16spice-qemu-char: Add watch supportHans de Goede
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-04-16spice-qemu-char: Remove #ifdef-ed code for old spice-server compatHans de Goede
We now require spice-server to be >= 0.12.0 so this is no longer needed. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-04-15sysemu: avoid proliferation of include/ subdirectoriesPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-03-27spice-qemu-char: Drop hackish vmc_register on spice_chr_writeHans de Goede
Now that the core takes care of fe_open tracking we no longer need this hack. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Message-id: 1364292483-16564-12-git-send-email-hdegoede@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-03-27qemu-char: Consolidate guest_close/guest_open into a set_fe_open callbackHans de Goede
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Message-id: 1364292483-16564-7-git-send-email-hdegoede@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-03-27qemu-char: Rename opened to be_openHans de Goede
Rename the opened variable to be_open to reflect that it contains the opened state of the backend. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Message-id: 1364292483-16564-2-git-send-email-hdegoede@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-03-14spice-qemu-char: Remove dead debugging codeHans de Goede
Since commit d62e5f7036a018b2ad09f17ebd481bd28953d783 "chardev: add spice support to qapi" It is impossible to set the debug parameter, so all the dprintf calls are essentially nops. Since we've not needed the debug parameter in ages this is not a problem, if it later turns out we do need some more debugging options we can add more trace-points. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-03-14spice-qemu-char: Fix name parameter issues after qapi-ifyingHans de Goede
The strings passed in through the qapi calls are dynamic memory, since we want to have them stick around longer then just the call to qemu_chr_open_spice_* we need to strdup them. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-03-13chardev: add spice support to qapiGerd Hoffmann
This patch adds 'spicevmc' and 'spiceport' support to qapi and also switches over the spice chardev initialization to the new qapi code path.
2013-03-08qemu-char: move spice registration to spice-qemu-char.cAnthony Liguori
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Amit Shah <amit.shah@redhat.com> Message-id: 49a8d12eeb117e5530b2fab02af7681b54f9245c.1362505276.git.amit.shah@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-12-19Merge remote-tracking branch 'bonzini/header-dirs' into stagingAnthony Liguori
* bonzini/header-dirs: (45 commits) janitor: move remaining public headers to include/ hw: move executable format header files to hw/ fpu: move public header file to include/fpu softmmu: move remaining include files to include/ subdirectories softmmu: move include files to include/sysemu/ misc: move include files to include/qemu/ qom: move include files to include/qom/ migration: move include files to include/migration/ monitor: move include files to include/monitor/ exec: move include files to include/exec/ block: move include files to include/block/ qapi: move include files to include/qobject/ janitor: add guards to headers qapi: make struct Visitor opaque qapi: remove qapi/qapi-types-core.h qapi: move inclusions of qemu-common.h from headers to .c files ui: move files to ui/ and include/ui/ qemu-ga: move qemu-ga files to qga/ net: reorganize headers net: move net.c to net/ ... Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-12-19softmmu: move remaining include files to include/ subdirectoriesPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19misc: move include files to include/qemu/Paolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19janitor: do not rely on indirect inclusions of or from qemu-char.hPaolo Bonzini
Various header files rely on qemu-char.h including qemu-config.h or main-loop.h, but they really do not need qemu-char.h at all (particularly interesting is the case of the block layer!). Clean this up, and also add missing inclusions of qemu-char.h itself. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-17spice-qemu-char: register spicevmc ports during qemu_spice_init()Marc-André Lureau
Do the delayed registration of spicevmc ports after Spice server is initialized. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-12-17spice-qemu-char: keep a list of spice chardevMarc-André Lureau
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-12-17spice-qemu-char: add spiceport chardevMarc-André Lureau
Add a new spice chardev to allow arbitrary communication between the host and the Spice client via the spice server. Examples: This allows the Spice client to have a special port for the qemu monitor: ... -chardev spiceport,name=org.qemu.monitor,id=monitorport -mon chardev=monitorport v2: - remove support for chardev to chardev linking - conditionnaly compile with SPICE_SERVER_VERSION Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-12-17spice-qemu-char: factor out CharDriverState creationMarc-André Lureau
Make the CharDriverState creation code reusable by spicevmc port. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-12-17spice-qemu-char: write to chardev whatever amount it can readMarc-André Lureau
The current code waits until the chardev can read MIN(len, VMC_MAX) But some chardev may never reach than amount, in fact some of them will only ever accept write of 1. Fix the min computation and remove the VMC_MAX constant. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-04-20spice-qemu-char.c: Show what name is unsupportedEduardo Elias Ferreira
Signed-off-by: Eduardo Elias Ferreira <edusf@linux.vnet.ibm.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-02-24Revert "qemu-char: Print strerror message on failure" and depsMarkus Armbruster
The commit's purpose is laudable: The only way for chardev drivers to communicate an error was to return a NULL pointer, which resulted in an error message that said _that_ something went wrong, but not _why_. It attempts to achieve it by changing the interface to return 0/-errno and update qemu_chr_open_opts() to use strerror() to display a more helpful error message. Unfortunately, it has serious flaws: 1. Backends "socket" and "udp" return bogus error codes, because qemu_chr_open_socket() and qemu_chr_open_udp() assume that unix_listen_opts(), unix_connect_opts(), inet_listen_opts(), inet_connect_opts() and inet_dgram_opts() fail with errno set appropriately. That assumption is wrong, and the commit turns unspecific error messages into misleading error messages. For instance: $ qemu-system-x86_64 -nodefaults -vnc :0 -chardev socket,id=bar,host=xxx inet_connect: host and/or port not specified chardev: opening backend "socket" failed: No such file or directory ENOENT is what happens to be in my errno when the backend returns -errno. Let's put ERANGE there just for giggles: $ qemu-system-x86_64 -nodefaults -vnc :0 -chardev socket,id=bar,host=xxx -drive if=none,iops=99999999999999999999 inet_connect: host and/or port not specified chardev: opening backend "socket" failed: Numerical result out of range Worse: when errno happens to be zero, return -errno erroneously signals success, and qemu_chr_new_from_opts() dies dereferencing uninitialized chr. I observe this with "-serial unix:". 2. All qemu_chr_open_opts() knows about the error is an errno error code. That's simply not enough for a decent message. For instance, when inet_dgram() can't resolve the parameter host, which errno code should it use? What if it can't resolve parameter localaddr? Clue: many backends already report errors in their open methods. Let's revert the flawed commit along with its dependencies, and fix up the silent error paths instead. This reverts commit 6e1db57b2ac9025c2443c665a0d9e78748637b26. Conflicts: console.c hw/baum.c qemu-char.c This reverts commit aad04cd024f0c59f0b96f032cde2e24eb3abba6d. The parts of commit db418a0a "Add stdio char device on windows" that depend on the reverted change fixed up. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-11-28spice-qemu-char: Generate chardev open/close eventsHans de Goede
Define a state callback and make that generate chardev open/close events when called by the spice-server. Notes: 1) For all but the newest spice-server versions (which have a fix for this) the code ignores these events for a spicevmc with a subtype of vdagent, this subtype specific knowledge is undesirable, but unavoidable for now, see: http://lists.freedesktop.org/archives/spice-devel/2011-July/004837.html 2) This code deliberately sends the events immediately rather then from a bh. This is done this way because: a) There is no need to do it from a bh; and b) Doing it from a bh actually causes issues because the spice-server may send data immediately after the open and when the open runs from a bh, then qemu_chr_be_can_write will return 0 for the first write which the spice-server does not expect, when this happens the spice-server will never retry the write causing communication to stall. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-09-07spice-qemu-char.c: Use correct printf format char for ssize_tPeter Maydell
Use the correct printf format string character (%z) for ssize_t. This fixes a compile failure on 32 bit Linux with spice enabled. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-08-22char: rename qemu_chr_can_read() -> qemu_chr_be_can_read()Anthony Liguori
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-08-22char: rename qemu_chr_read() -> qemu_chr_be_write()Anthony Liguori
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-08-20Use glib memory allocation and free functionsAnthony Liguori
qemu_malloc/qemu_free no longer exist after this commit. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-07-23qemu-char: Print strerror message on failureKevin Wolf
The only way for chardev drivers to communicate an error was to return a NULL pointer, which resulted in an error message that said _that_ something went wrong, but not _why_. This patch changes the interface to return 0/-errno and updates qemu_chr_open_opts to use strerror to display a more helpful error message. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-06-06spice-qemu-char: Fix flow control in client -> guest directionHans de Goede
In the old spice-vmc device we used to have: last_out = virtio_serial_write(&svc->port, p, MIN(len, VMC_MAX_HOST_WRITE)); if (last_out > 0) ... Now in the chardev backend we have: last_out = MIN(len, VMC_MAX_HOST_WRITE); qemu_chr_read(scd->chr, p, last_out); if (last_out > 0) { ... Which causes us to no longer detect if the virtio port is not ready to receive data from us. chardev actually has a mechanism to detect this, but it requires a separate call to qemu_chr_can_read, before calling qemu_chr_read (which return void). This patch uses qemu_chr_can_read to fix the flow control from client to guest. Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2011-04-28spice-chardev: listen to frontend guest open / closeHans de Goede
Note the vmc_register_interface() in spice_chr_write is left in place in case someone uses spice-chardev with a frontend which does not have guest open / close notification. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Alon Levy <alevy@redhat.com> Signed-off-by: Amit Shah <amit.shah@redhat.com>
2011-01-24spice: add chardev (v5)Alon Levy
Adding a chardev backend for spice, where spice determines what to do with it based on the name attribute given during chardev creation. For usage by spice vdagent in conjunction with a properly named virtio-serial device, and future smartcard channel usage. Example usage: qemu -device virtio-serial -chardev spicevmc,name=vdagent,id=vdagent \ -device virtserialport,chardev=vdagent,name=com.redhat.spice.0 v4->v5: * add tracing events * fix missing comma * fix help string to show debug is optional v3->v4: * updated commit message v1->v3 changes: (v2 had a wrong commit message) * removed spice-qemu-char.h, folded into ui/qemu-spice.h * removed dead IOCTL code * removed comment * removed ifdef CONFIG_SPICE from qemu-config.c and qemu-options.hx help. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>