aboutsummaryrefslogtreecommitdiff
path: root/qemu-options.hx
AgeCommit message (Collapse)Author
2016-04-19fw_cfg: Adopt /opt/RFQDN conventionMarkus Armbruster
FW CFG's primary user is QEMU, which uses it to expose configuration information (in the widest sense) to Firmware. Thus the name FW CFG. FW CFG can also be used by others for their own purposes. QEMU is merely acting as transport then. Names starting with opt/ are reserved for such uses. There is no provision, however, to guide safe sharing among different such users. Fix that, loosely following QMP precedence: names should start with opt/RFQDN/, where RFQDN is a reverse fully qualified domain name you control. Based on a more ambitious patch from Michael Tsirkin. Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Gabriel L. Somlo <somlo@cmu.edu> Cc: Laszlo Ersek <lersek@redhat.com> Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Gabriel Somlo <somlo@cmu.edu> Reviewed-by: Laszlo Ersek <lersek@redhat.com>
2016-04-05crypto: fix typo in docs for secret object typeDaniel P. Berrange
The docs for the secret object type specified the wrong number of bytes for the AES initialization vector. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2016-04-01slirp: Allow disabling IPv4 or IPv6Samuel Thibault
Add ipv4 and ipv6 boolean options, so the user can setup IPv4-only and IPv6-only network environments. Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Reviewed-by: Thomas Huth <thuth@redhat.com>
2016-03-30net/filter-mirror: implement filter-redirectorZhang Chen
Filter-redirector is a netfilter plugin. It gives qemu the ability to redirect net packet. redirector can redirect filter's net packet to outdev. and redirect indev's packet to filter. filter + redirector | +--------------+ | | | indev +-----------+ +----------> outdev | | | +--------------+ | v filter usage: -netdev user,id=hn0 -chardev socket,id=s0,host=ip_primary,port=X,server,nowait -chardev socket,id=s1,host=ip_primary,port=Y,server,nowait -filter-redirector,id=r0,netdev=hn0,queue=tx/rx/all,indev=s0,outdev=s1 Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com> Signed-off-by: Wen Congyang <wency@cn.fujitsu.com> Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-03-30net/filter-mirror:Add filter-mirrorZhang Chen
Filter-mirror is a netfilter plugin. It gives qemu the ability to mirror packets to a chardev. usage: -netdev tap,id=hn0 -chardev socket,id=mirror0,host=ip_primary,port=X,server,nowait -filter-mirror,id=m0,netdev=hn0,queue=tx/rx/all,outdev=mirror0 Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com> Signed-off-by: Wen Congyang <wency@cn.fujitsu.com> Reviewed-by: Yang Hongyang <hongyang.yang@easystack.cn> Reviewed-by: zhanghailiang <zhang.zhanghailiang@huawei.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-03-29Merge remote-tracking branch 'remotes/thibault/tags/samuel-thibault' into ↵Peter Maydell
staging slirp updates # gpg: Signature made Tue 29 Mar 2016 00:16:05 BST using RSA key ID FB6B2F1D # gpg: Good signature from "Samuel Thibault <samuel.thibault@gnu.org>" # gpg: aka "Samuel Thibault <sthibault@debian.org>" # gpg: aka "Samuel Thibault <samuel.thibault@inria.fr>" # gpg: aka "Samuel Thibault <samuel.thibault@labri.fr>" # gpg: aka "Samuel Thibault <samuel.thibault@ens-lyon.org>" # gpg: WARNING: This key is not certified with sufficiently trusted signatures! # gpg: It is not certain that the signature belongs to the owner. # Primary key fingerprint: 900C B024 B679 31D4 0F82 304B D017 8C76 7D06 9EE6 # Subkey fingerprint: F632 74CD C630 0873 CB3D 29D9 E3E5 1CE8 FB6B 2F1D * remotes/thibault/tags/samuel-thibault: Rework ipv6 options Use C99 flexible array instead of 1-byte trailing array Avoid embedding struct mbuf in other structures slirp: send icmp6 errors when UDP send failed slirp: Fix memory leak on small incoming ipv4 packet Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-03-29Rework ipv6 optionsSamuel Thibault
Rename the recently-added ip6-foo options into ipv6-foo options, to make them coherent with other ipv6 options. Also rework the documentation. Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Reviewed-by: Eric Blake <eblake@redhat.com>
2016-03-24Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell
* Log filtering from Alex and Peter * Chardev fix from Marc-André * config.status tweak from David * Header file tweaks from Markus, myself and Veronia (Outreachy candidate) * get_ticks_per_sec() removal from Rutuja (Outreachy candidate) * Coverity fix from myself * PKE implementation from myself, based on rth's XSAVE support # gpg: Signature made Thu 24 Mar 2016 20:15:11 GMT using RSA key ID 78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" * remotes/bonzini/tags/for-upstream: (28 commits) target-i386: implement PKE for TCG config.status: Pass extra parameters char: translate from QIOChannel error to errno exec: fix error handling in file_ram_alloc cputlb: modernise the debug support qemu-log: support simple pid substitution for logs target-arm: dfilter support for in_asm qemu-log: dfilter-ise exec, out_asm, op and opt_op qemu-log: new option -dfilter to limit output qemu-log: Improve the "exec" TB execution logging qemu-log: Avoid function call for disabled qemu_log_mask logging qemu-log: correct help text for -d cpu tcg: pass down TranslationBlock to tcg_code_gen util: move declarations out of qemu-common.h Replaced get_tick_per_sec() by NANOSECONDS_PER_SECOND hw: explicitly include qemu-common.h and cpu.h include/crypto: Include qapi-types.h or qemu/bswap.h instead of qemu-common.h isa: Move DMA_transfer_handler from qemu-common.h to hw/isa/isa.h Move ParallelIOArg from qemu-common.h to sysemu/char.h Move QEMU_ALIGN_*() from qemu-common.h to qemu/osdep.h ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Conflicts: scripts/clean-includes
2016-03-24input-linux: switch over to -objectGerd Hoffmann
This patches makes input-linux use -object instead of a new command line switch. So, instead of the switch ... -input-linux /dev/input/event$nr ... you must create an object this way: -object input-linux,id=$name,evdev=/dev/input/event$nr Bonus is that you can hot-add and hot-remove them via monitor now. Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1457681901-30916-1-git-send-email-kraxel@redhat.com
2016-03-22qemu-log: new option -dfilter to limit outputAlex Bennée
When debugging big programs or system emulation sometimes you want both the verbosity of cpu,exec et all but don't want to generate lots of logs for unneeded stuff. This patch adds a new option -dfilter which allows you to specify interesting address ranges in the form: -dfilter 0x8000..0x8fff,0xffffffc000080000+0x200,... Then logging code can use the new qemu_log_in_addr_range() function to decide if it will output logging information for the given range. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <1458052224-9316-7-git-send-email-alex.bennee@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-15qapi-schema, qemu-options & slirp: Adding Qemu options for IPv6 addressesYann Bordenave
This patch adds parameters to manage some new options in the qemu -net command. Slirp IPv6 address, network prefix, and DNS IPv6 address can be given in argument to the qemu command. Defaults parameters are respectively fec0::2, fec0::, /64 and fec0::3. Signed-off-by: Yann Bordenave <meow@meowstars.org> Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Reviewed-by: Thomas Huth <thuth@redhat.com>
2016-03-10Merge remote-tracking branch 'remotes/kraxel/tags/pull-ui-20160309-1' into ↵Peter Maydell
staging add linux evdev support, vnc and console fixes. # gpg: Signature made Wed 09 Mar 2016 09:02:47 GMT using RSA key ID D3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" * remotes/kraxel/tags/pull-ui-20160309-1: ui/console: add escape sequence \e[5, 6n input-linux: add switch to enable auto-repeat events input-linux: add option to toggle grab on all devices input: linux evdev support vnc: send cursor when a new client is connecting Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-03-08input: linux evdev supportGerd Hoffmann
This patch adds support for reading input events directly from linux evdev devices and forward them to the guest. Unlike virtio-input-host which simply passes on all events to the guest without looking at them this will interpret the events and feed them into the qemu input subsystem. Therefore this is limited to what the qemu input subsystem and the emulated input devices are able to handle. Also there is no support for absolute coordinates (tablet/touchscreen). So we are talking here about basic mouse and keyboard support. The advantage is that it'll work without virtio-input drivers in the guest, the events are delivered to the usual ps/2 or usb input devices (depending on what the machine happens to have). And for keyboards qemu is able to switch the keyboard between guest and host on hotkey. The hotkey is hard-coded for now (both control keys), initialy the guest owns the keyboard. Probably most useful when assigning vga devices with vfio and using a physical monitor instead of vnc/spice/gtk as guest display. Usage: Add '-input-linux /dev/input/event<nr>' to the qemu command line. Note that udev has rules which populate /dev/input/by-{id,path} with static names, which might be more convinient to use. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Message-id: 1457087116-4379-2-git-send-email-kraxel@redhat.com
2016-03-08filter: Add 'status' property for filter objectzhanghailiang
With this property, users can control if this filter is 'on' or 'off'. The default behavior for filter is 'on'. For some types of filters, they may need to react to status changing, So here, we introduced status changing callback/notifier for filter class. We will skip the disabled ('off') filter when delivering packets in net layer. Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Yang Hongyang <hongyang.yang@easystack.cn> Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-03-07icount: possible options for sleep are on or offPranith Kumar
icount sleep takes on or off as options. A few places mention sleep=no which is not accepted. This patch corrects them. Signed-off-by: Pranith Kumar <bobby.prani@gmail.com> Message-Id: <1456499811-16819-1-git-send-email-bobby.prani@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-02-28migration: allow machine to enforce configuration section migrationGreg Kurz
Migration of pseries-2.3 doesn't have configuration section. Unfortunately, QEMU 2.4/2.4.1/2.5 are buggy and always stream and expect the configuration section, and break migration both ways. This patch introduces a property which allows to enforce a configuration section for machines who don't have one. It can be set at startup: -machine enforce-config-section=on or later from the QEMU monitor: qom-set /machine enforce-config-section on It is up to the tooling to set or unset this property according to the version of the QEMU at the other end of the pipe. Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com> Reviewed-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-02-25Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell
* Asynchronous dump-guest-memory from Peter * improved logging with -D -daemonize from Dimitris * more address_space_* optimization from Gonglei * TCG xsave/xrstor thinko fix * chardev bugfix and documentation patch # gpg: Signature made Thu 25 Feb 2016 15:12:27 GMT using RSA key ID 78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" * remotes/bonzini/tags/for-upstream: target-i386: fix confusion in xcr0 bit position vs. mask chardev: Properly initialize ChardevCommon components memory: Remove unreachable return statement memory: optimize qemu_get_ram_ptr and qemu_ram_ptr_length exec: store RAMBlock pointer into memory region log: Redirect stderr to logfile if deamonized dump-guest-memory: add qmp event DUMP_COMPLETED Dump: add hmp command "info dump" Dump: add qmp command "query-dump" DumpState: adding total_size and written_size fields dump-guest-memory: add "detach" support dump-guest-memory: disable dump when in INMIGRATE state dump-guest-memory: introduce dump_process() helper function. dump-guest-memory: add dump_in_progress() helper function dump-guest-memory: using static DumpState, add DumpStatus dump-guest-memory: add "detach" flag for QMP/HMP interfaces. dump-guest-memory: cleanup: removing dump_{error|cleanup}(). scripts/kvm/kvm_stat: Fix missing right parantheses and ".format(...)" qemu-options.hx: Improve documentation of chardev multiplexing mode Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-02-23spice: add opengl/virgl/dmabuf supportGerd Hoffmann
This adds support for dma-buf passing to spice. This makes virtio-gpu with 3d acceleration work with spice. Workflow: * virglrenderer renders the guest command stream into a texture. * qemu exports the texture as dma-buf and passes on that dma-buf to spice-server. * spice-server passes the dma-buf to spice-client, using unix socket file descriptor passing. * spice-client asks the window systems composer to render the dma-buf to the screen. Requires cutting edge spice (server) and spice-gtk (client) builds, from git master branch. Also requires libvirt managing your qemu instance, and using "virt-viewer --attach $guest". libvirt will connect spice-server and spice-client using unix sockets instead of tcp sockets then, which is required for file descriptor passing. Works for the local case (spice server and client on the same machine) only. Supporting remote too is planned (by feeding the dma-bufs into gpu-assisted video encoder), but not there yet. gl mode is turned off by default, use "-spice gl=on,$otherargs" to enable it. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2016-02-19qemu-options.hx: Improve documentation of chardev multiplexing modePeter Maydell
The current documentation of chardev mux=on is rather brief and opaque; expand it to hopefully be a bit more helpful. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <1455643738-6068-1-git-send-email-peter.maydell@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-02-06pc: set the OEM fields in the RSDT and the FADT from the SLICLaszlo Ersek
The Microsoft spec about the SLIC and MSDM ACPI tables at <http://go.microsoft.com/fwlink/p/?LinkId=234834> requires the OEM ID and OEM Table ID fields to be consistent between the SLIC and the RSDT/XSDT. That further affects the FADT, because a similar match between the FADT and the RSDT/XSDT is required by the ACPI spec in general. This patch wires up the previous three patches. Cc: "Michael S. Tsirkin" <mst@redhat.com> (supporter:ACPI/SMBIOS) Cc: Igor Mammedov <imammedo@redhat.com> (supporter:ACPI/SMBIOS) Cc: Paolo Bonzini <pbonzini@redhat.com> (maintainer:X86) Cc: Richard W.M. Jones <rjones@redhat.com> Cc: Aleksei Kovura <alex3kov@zoho.com> Cc: Michael Tokarev <mjt@tls.msk.ru> Cc: Steven Newbury <steve@snewbury.org.uk> RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=1248758 LP: https://bugs.launchpad.net/qemu/+bug/1533848 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Steven Newbury <steve@snewbury.org.uk>
2016-02-03trace: add "-trace help"Paolo Bonzini
Print a list of trace points Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Denis V. Lunev <den@openvz.org> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Message-id: 1452174932-28657-7-git-send-email-den@openvz.org Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-02-03trace: add "-trace enable=..."Paolo Bonzini
Allow enabling events without going through a file, for example: qemu-system-x86_64 -trace bdrv_aio_writev -trace bdrv_aio_readv or with globbing too: qemu-system-x86_64 -trace 'bdrv_aio_*' if an appropriate backend is enabled (simple, stderr, ftrace). Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Denis V. Lunev <den@openvz.org> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Message-id: 1452174932-28657-6-git-send-email-den@openvz.org Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-02-03trace: fix documentationPaolo Bonzini
Mention the ftrace backend too. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Denis V. Lunev <den@openvz.org> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Message-id: 1452174932-28657-2-git-send-email-den@openvz.org Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-01-26char: introduce support for TLS encrypted TCP chardev backendDaniel P. Berrange
This integrates support for QIOChannelTLS object in the TCP chardev backend. If the 'tls-creds=NAME' option is passed with the '-chardev tcp' argument, then it will setup the chardev such that the client is required to establish a TLS handshake when connecting. There is no support for checking the client certificate against ACLs in this initial patch. This is pending work to QOM-ify the ACL object code. A complete invocation to run QEMU as the server for a TLS encrypted serial dev might be $ qemu-system-x86_64 \ -nodefconfig -nodefaults -device sga -display none \ -chardev socket,id=s0,host=127.0.0.1,port=9000,tls-creds=tls0,server \ -device isa-serial,chardev=s0 \ -object tls-creds-x509,id=tls0,endpoint=server,verify-peer=off,\ dir=/home/berrange/security/qemutls To test with the gnutls-cli tool as the client: $ gnutls-cli --priority=NORMAL -p 9000 \ --x509cafile=/home/berrange/security/qemutls/ca-cert.pem \ 127.0.0.1 If QEMU was told to use 'anon' credential type, then use the priority string 'NORMAL:+ANON-DH' with gnutls-cli Alternatively, if setting up a chardev to operate as a client, then the TLS credentials registered must be for the client endpoint. First a TLS server must be setup, which can be done with the gnutls-serv tool $ gnutls-serv --priority=NORMAL -p 9000 --echo \ --x509cafile=/home/berrange/security/qemutls/ca-cert.pem \ --x509certfile=/home/berrange/security/qemutls/server-cert.pem \ --x509keyfile=/home/berrange/security/qemutls/server-key.pem Then QEMU can connect with $ qemu-system-x86_64 \ -nodefconfig -nodefaults -device sga -display none \ -chardev socket,id=s0,host=127.0.0.1,port=9000,tls-creds=tls0 \ -device isa-serial,chardev=s0 \ -object tls-creds-x509,id=tls0,endpoint=client,\ dir=/home/berrange/security/qemutls Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <1453202071-10289-5-git-send-email-berrange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-01-15qemu-char: add logfile facility to all chardev backendsDaniel P. Berrange
Typically a UNIX guest OS will log boot messages to a serial port in addition to any graphical console. An admin user may also wish to use the serial port for an interactive console. A virtualization management system may wish to collect system boot messages by logging the serial port, but also wish to allow admins interactive access. Currently providing such a feature forces the mgmt app to either provide 2 separate serial ports, one for logging boot messages and one for interactive console login, or to proxy all output via a separate service that can multiplex the two needs onto one serial port. While both are valid approaches, they each have their own downsides. The former causes confusion and extra setup work for VM admins creating disk images. The latter places an extra burden to re-implement much of the QEMU chardev backends logic in libvirt or even higher level mgmt apps and adds extra hops in the data transfer path. A simpler approach that is satisfactory for many use cases is to allow the QEMU chardev backends to have a "logfile" property associated with them. $QEMU -chardev socket,host=localhost,port=9000,\ server=on,nowait,id-charserial0,\ logfile=/var/log/libvirt/qemu/test-serial0.log -device isa-serial,chardev=charserial0,id=serial0 This patch introduces a 'ChardevCommon' struct which is setup as a base for all the ChardevBackend types. Ideally this would be registered directly as a base against ChardevBackend, rather than each type, but the QAPI generator doesn't allow that since the ChardevBackend is a non-discriminated union. The ChardevCommon struct provides the optional 'logfile' parameter, as well as 'logappend' which controls whether QEMU truncates or appends (default truncate). Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <1452516281-27519-1-git-send-email-berrange@redhat.com> [Call qemu_chr_parse_common if cd->parse is NULL. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-12-22nvdimm acpi: build ACPI NFIT tableXiao Guangrong
NFIT is defined in ACPI 6.0: 5.2.25 NVDIMM Firmware Interface Table (NFIT) Currently, we only support PMEM mode. Each device has 3 structures: - SPA structure, defines the PMEM region info - MEM DEV structure, it has the @handle which is used to associate specified ACPI NVDIMM device we will introduce in later patch. Also we can happily ignored the memory device's interleave, the real nvdimm hardware access is hidden behind host - DCR structure, it defines vendor ID used to associate specified vendor nvdimm driver. Since we only implement PMEM mode this time, Command window and Data window are not needed The NVDIMM functionality is controlled by the parameter, 'nvdimm', which is introduced for the machine, there is a example to enable it: -machine pc,nvdimm -m 8G,maxmem=100G,slots=100 -object \ memory-backend-file,id=mem1,share,mem-path=/tmp/nvdimm1,size=10G -device \ nvdimm,memdev=mem1,id=nv1 It is disabled on default Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-12-22ipmi: Add documentationCorey Minyard
Add some basic documentation for the IPMI device. Signed-off-by: Corey Minyard <cminyard@mvista.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-12-18crypto: add support for loading encrypted x509 keysDaniel P. Berrange
Make use of the QCryptoSecret object to support loading of encrypted x509 keys. The optional 'passwordid' parameter to the tls-creds-x509 object type, provides the ID of a secret object instance that holds the decryption password for the PEM file. # printf "123456" > mypasswd.txt # $QEMU \ -object secret,id=sec0,filename=mypasswd.txt \ -object tls-creds-x509,passwordid=sec0,id=creds0,\ dir=/home/berrange/.pki/qemu,endpoint=server \ -vnc :1,tls-creds=creds0 This requires QEMU to be linked to GNUTLS >= 3.1.11. If GNUTLS is too old an error will be reported if an attempt is made to pass a decryption password. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-12-18crypto: add QCryptoSecret object class for password/key handlingDaniel P. Berrange
Introduce a new QCryptoSecret object class which will be used for providing passwords and keys to other objects which need sensitive credentials. The new object can provide secret values directly as properties, or indirectly via a file. The latter includes support for file descriptor passing syntax on UNIX platforms. Ordinarily passing secret values directly as properties is insecure, since they are visible in process listings, or in log files showing the CLI args / QMP commands. It is possible to use AES-256-CBC to encrypt the secret values though, in which case all that is visible is the ciphertext. For ad hoc developer testing though, it is fine to provide the secrets directly without encryption so this is not explicitly forbidden. The anticipated scenario is that libvirtd will create a random master key per QEMU instance (eg /var/run/libvirt/qemu/$VMNAME.key) and will use that key to encrypt all passwords it provides to QEMU via '-object secret,....'. This avoids the need for libvirt (or other mgmt apps) to worry about file descriptor passing. It also makes life easier for people who are scripting the management of QEMU, for whom FD passing is significantly more complex. Providing data inline (insecure, only for ad hoc dev testing) $QEMU -object secret,id=sec0,data=letmein Providing data indirectly in raw format printf "letmein" > mypasswd.txt $QEMU -object secret,id=sec0,file=mypasswd.txt Providing data indirectly in base64 format $QEMU -object secret,id=sec0,file=mykey.b64,format=base64 Providing data with encryption $QEMU -object secret,id=master0,file=mykey.b64,format=base64 \ -object secret,id=sec0,data=[base64 ciphertext],\ keyid=master0,iv=[base64 IV],format=base64 Note that 'format' here refers to the format of the ciphertext data. The decrypted data must always be in raw byte format. More examples are shown in the updated docs. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-12-17kvm: add support for -machine kernel_irqchip=splitMatt Gingell
This patch adds the initial plumbing for split IRQ chip mode via KVM_CAP_SPLIT_IRQCHIP. In addition to option processing, a number of kvm_*_in_kernel macros are defined to help clarify which component is where. Signed-off-by: Matt Gingell <gingell@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-11-06replay: command line optionsPavel Dovgalyuk
This patch introduces command line options for enabling recording or replaying virtual machine behavior. These options are added to icount command line parameter. They include 'rr' which switches between record and replay and 'rrfile' for specifying the filename for replay log. Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru> Message-Id: <20150917162518.8676.70792.stgit@PASHA-ISP.def.inno> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
2015-10-27options: Add documentation for filter-dumpThomas Huth
Add a short description for the filter-dump command line options. Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2015-10-19fw_cfg: insert string blobs via qemu cmdlineGabriel L. Somlo
Allow users to provide custom fw_cfg blobs with ascii string payloads specified directly on the qemu command line. Suggested-by: Jordan Justen <jordan.l.justen@intel.com> Suggested-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Gabriel Somlo <somlo@cmu.edu> Message-id: 1443544141-26568-1-git-send-email-somlo@cmu.edu Reviewd-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-10-12netfilter: add a netbuffer filterYang Hongyang
This filter is to buffer/release packets. Can be used when using MicroCheckpointing or other Remus like VM FT solutions. You can also use it to crudely simulate network delay. Doesn't actually delay individual packets, but batches them together, which is a delay of sorts. Usage: -netdev tap,id=bn0 -object filter-buffer,id=f0,netdev=bn0,queue=rx,interval=1000 NOTE: Interval is in microseconds, it can't be omitted currently, and can't be 0. Signed-off-by: Yang Hongyang <yanghy@cn.fujitsu.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2015-09-24vhost-user: add multiple queue supportChangchun Ouyang
This patch is initially based a patch from Nikolay Nikolaev. This patch adds vhost-user multiple queue support, by creating a nc and vhost_net pair for each queue. Qemu exits if find that the backend can't support the number of requested queues (by providing queues=# option). The max number is queried by a new message, VHOST_USER_GET_QUEUE_NUM, and is sent only when protocol feature VHOST_USER_PROTOCOL_F_MQ is present first. The max queue check is done at vhost-user initiation stage. We initiate one queue first, which, in the meantime, also gets the max_queues the backend supports. In older version, it was reported that some messages are sent more times than necessary. Here we came an agreement with Michael that we could categorize vhost user messages to 2 types: non-vring specific messages, which should be sent only once, and vring specific messages, which should be sent per queue. Here I introduced a helper function vhost_user_one_time_request(), which lists following messages as non-vring specific messages: VHOST_USER_SET_OWNER VHOST_USER_RESET_DEVICE VHOST_USER_SET_MEM_TABLE VHOST_USER_GET_QUEUE_NUM For above messages, we simply ignore them when they are not sent the first time. Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com> Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com> Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com> Reviewed-by: Jason Wang <jasowang@redhat.com> Tested-by: Marcel Apfelbaum <marcel@redhat.com>
2015-09-15ui: convert VNC server to use QCryptoTLSSessionDaniel P. Berrange
Switch VNC server over to using the QCryptoTLSSession object for the TLS session. This removes the direct use of gnutls from the VNC server code. It also removes most knowledge about TLS certificate handling from the VNC server code. This has the nice effect that all the CONFIG_VNC_TLS conditionals go away and the user gets an actual error message when requesting TLS instead of it being silently ignored. With this change, the existing configuration options for enabling TLS with -vnc are deprecated. Old syntax for anon-DH credentials: -vnc hostname:0,tls New syntax: -object tls-creds-anon,id=tls0,endpoint=server \ -vnc hostname:0,tls-creds=tls0 Old syntax for x509 credentials, no client certs: -vnc hostname:0,tls,x509=/path/to/certs New syntax: -object tls-creds-x509,id=tls0,dir=/path/to/certs,endpoint=server,verify-peer=no \ -vnc hostname:0,tls-creds=tls0 Old syntax for x509 credentials, requiring client certs: -vnc hostname:0,tls,x509verify=/path/to/certs New syntax: -object tls-creds-x509,id=tls0,dir=/path/to/certs,endpoint=server,verify-peer=yes \ -vnc hostname:0,tls-creds=tls0 This aligns VNC with the way TLS credentials are to be configured in the future for chardev, nbd and migration backends. It also has the benefit that the same TLS credentials can be shared across multiple VNC server instances, if desired. If someone uses the deprecated syntax, it will internally result in the creation of a 'tls-creds' object with an ID based on the VNC server ID. This allows backwards compat with the CLI syntax, while still deleting all the original TLS code from the VNC server. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-09-15crypto: introduce new module for TLS x509 credentialsDaniel P. Berrange
Introduce a QCryptoTLSCredsX509 class which is used to manage x509 certificate TLS credentials. This will be the preferred credential type offering strong security characteristics Example CLI configuration: $QEMU -object tls-creds-x509,id=tls0,endpoint=server,\ dir=/path/to/creds/dir,verify-peer=yes The 'id' value in the -object args will be used to associate the credentials with the network services. For example, when the VNC server is later converted it would use $QEMU -object tls-creds-x509,id=tls0,.... \ -vnc 127.0.0.1:1,tls-creds=tls0 Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2015-09-15crypto: introduce new module for TLS anonymous credentialsDaniel P. Berrange
Introduce a QCryptoTLSCredsAnon class which is used to manage anonymous TLS credentials. Use of this class is generally discouraged since it does not offer strong security, but it is required for backwards compatibility with the current VNC server implementation. Simple example CLI configuration: $QEMU -object tls-creds-anon,id=tls0,endpoint=server Example using pre-created diffie-hellman parameters $QEMU -object tls-creds-anon,id=tls0,endpoint=server,\ dir=/path/to/creds/dir The 'id' value in the -object args will be used to associate the credentials with the network services. For example, when the VNC server is later converted it would use $QEMU -object tls-creds-anon,id=tls0,.... \ -vnc 127.0.0.1:1,tls-creds=tls0 Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2015-09-11help: dd missing newlineLaurent Vivier
Signed-off-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-09-11maint: remove / fix many doubled wordsDaniel P. Berrange
Many source files have doubled words (eg "the the", "to to", and so on). Most of these can simply be removed, but a couple were actual mis-spellings (eg "to to" instead of "to do"). There was even one triple word score "to to to" :-) Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-09-10xen, gfx passthrough: basic graphics passthrough supportTiejun Chen
basic gfx passthrough support: - add a vga type for gfx passthrough - register/unregister legacy VGA I/O ports and MMIOs for passthrough GFX Signed-off-by: Tiejun Chen <tiejun.chen@intel.com> Signed-off-by: Yang Zhang <yang.z.zhang@Intel.com> Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2015-09-07smbios: implement smbios support for mach-virtWei Huang
This patch generates smbios tables for ARM mach-virt. Also add CONFIG_SMBIOS=y for ARM default config. Acked-by: Gabriel Somlo <somlo@cmu.edu> Tested-by: Gabriel Somlo <somlo@cmu.edu> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org> Tested-by: Leif Lindholm <leif.lindholm@linaro.org> Signed-off-by: Wei Huang <wei@redhat.com> Message-id: 1440615870-9518-3-git-send-email-wei@redhat.com [PMM: Added missing braces around an if().] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-07-24qemu-doc: fix typosGonglei
Signed-off-by: Gonglei <arei.gonglei@huawei.com> Message-Id: <1435917057-9396-1-git-send-email-arei.gonglei@huawei.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-07-20Revert "vhost-user: add multi queue support"Michael S. Tsirkin
This reverts commit 830d70db692e374b55555f4407f96a1ceefdcc97. The interface isn't fully backwards-compatible, which is bad. Let's redo this properly after 2.4. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-07-02block/iscsi: restore compatiblity with libiscsi 1.9.0Peter Lieven
RHEL7 and others are stuck with libiscsi 1.9.0 since there unfortunately was an ABI breakage after that release. Signed-off-by: Peter Lieven <pl@kamp.de> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1435313881-19366-1-git-send-email-pl@kamp.de Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-07-02block/iscsi: add support for request timeoutsPeter Lieven
libiscsi starting with 1.15 will properly support timeout of iscsi commands. The default will remain no timeout, but this can be changed via cmdline parameters, e.g.: qemu -iscsi timeout=30 -drive file=iscsi://... If a timeout occurs a reconnect is scheduled and the timed out command will be requeued for processing after a successful reconnect. The required API call iscsi_set_timeout is present since libiscsi 1.10 which was released in October 2013. However, due to some bugs in the libiscsi code the use is not recommended before version 1.15. Please note that this patch bumps the libiscsi requirement to 1.10 to have all function and macros defined. The patch fixes also a off-by-one error in the NOP timeout calculation which was fixed while touching these code parts. Signed-off-by: Peter Lieven <pl@kamp.de> Message-id: 1434455107-19328-1-git-send-email-pl@kamp.de Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-06-26target-mips: add Unified Hosting Interface (UHI) supportLeon Alrae
Add UHI semihosting support for MIPS. QEMU run with "-semihosting" option will alter the behaviour of SDBBP 1 instruction -- UHI operation will be called instead of generating a debug exception. Also tweak Malta's pseudo-bootloader. On CPU reset the $4 register is set to -1 if semihosting arguments are passed to indicate that the UHI operations should be used to obtain input arguments. Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
2015-06-23qemu-options: Use @itemx where appropriateMarkus Armbruster
Doesn't appear to make a difference, but let's use it consistently. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-06-23qemu-options: Improve -global documentationMarkus Armbruster
Recent commit 3751d7c "vl: allow full-blown QemuOpts syntax for -global" overloaded its existing argument syntax DRIVER.PROP=VALUE with QemuOpts syntax. Unambigious as long as no DRIVER contains '='. Its documentation claims that "the two syntaxes are equivalent." Improve it to spell out how exactly the old syntax gets desugared into the new one. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-06-22Merge remote-tracking branch 'remotes/afaerber/tags/qom-devices-for-peter' ↵Peter Maydell
into staging QOM infrastructure fixes and device conversions * Changes to name string ownership for alias properties * Improvements around enum properties * Cleanups around -object handling * New helper functions * Cleanups of qdev init helper functions * Add path argument to qom-tree script * QTest cleanup to use new qtest_add_data_func() consistently # gpg: Signature made Fri Jun 19 18:14:38 2015 BST using RSA key ID 3E7E013F # gpg: Good signature from "Andreas Färber <afaerber@suse.de>" # gpg: aka "Andreas Färber <afaerber@suse.com>" * remotes/afaerber/tags/qom-devices-for-peter: qdev: Un-deprecate qdev_init_nofail() qdev: Deprecated qdev_init() is finally unused, drop qom: Don't pass string table to object_get_enum() function qom: Add an object_property_add_enum() helper function qom: Make enum string tables const-correct qom: Add object_new_with_props() / object_new_withpropv() helpers qom: Add helper function for getting user objects root vl: Create (most) objects before creating chardev backends doc: Document user creatable object types in help text backends: Fix typename of 'policy' enum property in hostmem obj scripts: Add support for path as argument of qom-tree tests: Use qtest_add_data_func() consistently qdev: Free property names after registering gpio aliases qom: strdup() target property name on object_property_add_alias() Signed-off-by: Peter Maydell <peter.maydell@linaro.org>