aboutsummaryrefslogtreecommitdiff
path: root/qemu-io-cmds.c
AgeCommit message (Collapse)Author
2019-06-12qemu-io-cmds: use clock_gettime for benchmarkingAlex Bennée
The previous use of gettimeofday() ran into undefined behaviour when we ended up doing a div 0 for a very short operation. This is because gettimeofday only works at the microsecond level as well as being prone to discontinuous jumps in system time. Using clock_gettime with CLOCK_MONOTONIC gives greater precision and alleviates some of the potential problems with time jumping around. We could use CLOCK_MONOTONIC_RAW to avoid being tripped up by NTP and adjtime but that is Linux specific so I decided it would do for now. Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
2019-05-20block: Use BDRV_REQUEST_MAX_BYTES instead of BDRV_REQUEST_MAX_SECTORSAlberto Garcia
There are a few places in which we turn a number of bytes into sectors in order to compare the result against BDRV_REQUEST_MAX_SECTORS instead of using BDRV_REQUEST_MAX_BYTES directly. Signed-off-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-04-18block/qapi: Clean up how we print to monitor or stdoutMarkus Armbruster
bdrv_snapshot_dump(), bdrv_image_info_specific_dump(), bdrv_image_info_dump() and their helpers take an fprintf()-like callback and a FILE * to pass to it. hmp.c passes monitor_printf() cast to fprintf_function and the current monitor cast to FILE *. qemu-img.c and qemu-io-cmds.c pass fprintf and stdout. The type-punning is technically undefined behaviour, but works in practice. Clean up: drop the callback, and call qemu_printf() instead. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <20190417191805.28198-8-armbru@redhat.com>
2019-03-26qemu-io: Add write -n for BDRV_REQ_NO_FALLBACKKevin Wolf
This makes the new BDRV_REQ_NO_FALLBACK flag available in the qemu-io write command. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Acked-by: Eric Blake <eblake@redhat.com>
2019-03-12block: Remove the AioContext parameter from bdrv_reopen_multiple()Alberto Garcia
This parameter has been unused since 1a63a907507fbbcfaee3f622907ec244b Signed-off-by: Alberto Garcia <berto@igalia.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-03-12block: Add 'keep_old_opts' parameter to bdrv_reopen_queue()Alberto Garcia
The bdrv_reopen_queue() function is used to create a queue with the BDSs that are going to be reopened and their new options. Once the queue is ready bdrv_reopen_multiple() is called to perform the operation. The original options from each one of the BDSs are kept, with the new options passed to bdrv_reopen_queue() applied on top of them. For "x-blockdev-reopen" we want a function that behaves much like "blockdev-add". We want to ignore the previous set of options so that only the ones actually specified by the user are applied, with the rest having their default values. One of the things that we need is a way to tell bdrv_reopen_queue() whether we want to keep the old set of options or not, and that's what this patch does. All current callers are setting this new parameter to true and x-blockdev-reopen will set it to false. Signed-off-by: Alberto Garcia <berto@igalia.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-02-11bdrv_query_image_info Error parameter addedAndrey Shinkevich
Inform a user in case qcow2_get_specific_info fails to obtain QCOW2 image specific information. This patch is preliminary to the one "qcow2: Add list of bitmaps to ImageInfoSpecificQCow2". Signed-off-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Message-Id: <1549638368-530182-2-git-send-email-andrey.shinkevich@virtuozzo.com> Signed-off-by: Eric Blake <eblake@redhat.com>
2019-01-31qemu-io: Add generic function for reinitializing optind.Richard W.M. Jones
On FreeBSD 11.2: $ nbdkit memory size=1M --run './qemu-io -f raw -c "aio_write 0 512" $nbd' Parsing error: non-numeric argument, or extraneous/unrecognized suffix -- aio_write After main option parsing, we reinitialize optind so we can parse each command. However reinitializing optind to 0 does not work on FreeBSD. What happens when you do this is optind remains 0 after the option parsing loop, and the result is we try to parse argv[optind] == argv[0] == "aio_write" as if it was the first parameter. The FreeBSD manual page says: In order to use getopt() to evaluate multiple sets of arguments, or to evaluate a single set of arguments multiple times, the variable optreset must be set to 1 before the second and each additional set of calls to getopt(), and the variable optind must be reinitialized. (From the rest of the man page it is clear that optind must be reinitialized to 1). The glibc man page says: A program that scans multiple argument vectors, or rescans the same vector more than once, and wants to make use of GNU extensions such as '+' and '-' at the start of optstring, or changes the value of POSIXLY_CORRECT between scans, must reinitialize getopt() by resetting optind to 0, rather than the traditional value of 1. (Resetting to 0 forces the invocation of an internal initialization routine that rechecks POSIXLY_CORRECT and checks for GNU extensions in optstring.) This commit introduces an OS-portability function called qemu_reset_optind which provides a way of resetting optind that works on FreeBSD and platforms that use optreset, while keeping it the same as now on other platforms. Note that the qemu codebase sets optind in many other places, but in those other places it's setting a local variable and not using getopt. This change is only needed in places where we are using getopt and the associated global variable optind. Signed-off-by: Richard W.M. Jones <rjones@redhat.com> Message-id: 20190118101114.11759-2-rjones@redhat.com Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2018-12-14block: Remove flags parameter from bdrv_reopen_queue()Alberto Garcia
Now that all callers are passing all flag changes as QDict options, the flags parameter is no longer necessary, so we can get rid of it. Signed-off-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-12-14qemu-io: Put flag changes in the options QDict in reopen_f()Alberto Garcia
When reopen_f() puts a block device in the reopen queue, some of the new options are passed using a QDict, but others ("read-only" and the cache options) are passed as flags. This patch puts those flags in the QDict. This way the flags parameter becomes redundant and we'll be able to get rid of it in a subsequent patch. Signed-off-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-11-05qemu-io-cmds: Fix two format stringsStefan Weil
Use %zu instead of %zd for unsigned numbers. This fixes two error messages from the LSTM static code analyzer: This argument should be of type 'ssize_t' but is of type 'unsigned long' Signed-off-by: Stefan Weil <sw@weilnetz.de> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-10-01qemu-io: Fix writethrough check in reopenAlberto Garcia
"qemu-io reopen" doesn't allow changing the writethrough setting of the cache, but the check is wrong, causing an error even on a simple reopen with the default parameters: $ qemu-img create -f qcow2 hd.qcow2 1M $ qemu-system-x86_64 -monitor stdio -drive if=virtio,file=hd.qcow2 (qemu) qemu-io virtio0 reopen Cannot change cache.writeback: Device attached Signed-off-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-06-11qemu-io: Let command functions return error codeMax Reitz
This is basically what everything else in the qemu code base does, so we can do it here, too. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 20180509194302.21585-3-mreitz@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2018-06-11qemu-io: Drop command functions' return valuesMax Reitz
For qemu-io, a function returns an integer with two possible values: 0 for "qemu-io may continue execution", or 1 for "qemu-io should exit". However, there is only a single command that returns 1, and that is "quit". So let's turn this case into a global variable instead so we can make better use of the return value in a later patch. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 20180509194302.21585-2-mreitz@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2018-02-09Move include qemu/option.h from qemu-common.h to actual usersMarkus Armbruster
qemu-common.h includes qemu/option.h, but most places that include the former don't actually need the latter. Drop the include, and add it to the places that actually need it. While there, drop superfluous includes of both headers, and separate #include from file comment with a blank line. This cleanup makes the number of objects depending on qemu/option.h drop from 4545 (out of 4743) to 284 in my "build everything" tree. Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180201111846.21846-20-armbru@redhat.com> [Semantic conflict with commit bdd6a90a9e in block/nvme.c resolved]
2017-12-22block: Keep nodes drained between reopen_queue/multipleKevin Wolf
The bdrv_reopen*() implementation doesn't like it if the graph is changed between queuing nodes for reopen and actually reopening them (one of the reasons is that queuing can be recursive). So instead of draining the device only in bdrv_reopen_multiple(), require that callers already drained all affected nodes, and assert this in bdrv_reopen_queue(). Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com>
2017-10-26qemu-io: Relax 'alloc' now that block-status doesn't assertEric Blake
Previously, the alloc command required that input parameters be sector-aligned and clamped to 32 bits, because the underlying bdrv_is_allocated used a 32-bit parameter and asserted aligned inputs. But now that we have fixed block status to report a 64-bit bytes value, and to properly round requests on behalf of guests, we can pass any values, and can use qemu-io to add coverage that our rounding is correct regardless of the guest alignment constraints. Update iotest 177 to intentionally probe block status at unaligned boundaries as well as with a bytes value that does not map to 32-bit sectors, which also required tweaking the image prep to leave an unallocated portion to the image under test. Signed-off-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-09-26qemu-io: Drop write permissions before read-only reopenKevin Wolf
qemu-io provides a 'reopen' command that allows switching from writable to read-only access. We need to make sure that we don't try to keep write permissions to a BlockBackend that becomes read-only, otherwise things are going to fail. This requires a bdrv_drain() call because otherwise in-flight AIO write requests could issue new internal requests while the permission has already gone away, which would cause assertion failures. Draining the queue doesn't break AIO requests in any new way, bdrv_reopen() would drain it anyway only a few lines later. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com>
2017-08-08qemu-io: Allow reopen read-writeKevin Wolf
This allows qemu-iotests to test the switch between read-only and read-write mode for block devices. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com>
2017-07-11block: Add PreallocMode to blk_truncate()Max Reitz
blk_truncate() itself will pass that value to bdrv_truncate(), and all callers of blk_truncate() just set the parameter to PREALLOC_MODE_OFF for now. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 20170613202107.10125-4-mreitz@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-07-10block: Make bdrv_is_allocated() byte-basedEric Blake
We are gradually moving away from sector-based interfaces, towards byte-based. In the common case, allocation is unlikely to ever use values that are not naturally sector-aligned, but it is possible that byte-based values will let us be more precise about allocation at the end of an unaligned file that can do byte-based access. Changing the signature of the function to use int64_t *pnum ensures that the compiler enforces that all callers are updated. For now, the io.c layer still assert()s that all callers are sector-aligned on input and that *pnum is sector-aligned on return to the caller, but that can be relaxed when a later patch implements byte-based block status. Therefore, this code adds usages like DIV_ROUND_UP(,BDRV_SECTOR_SIZE) to callers that still want aligned values, where the call might reasonbly give non-aligned results in the future; on the other hand, no rounding is needed for callers that should just continue to work with byte alignment. For the most part this patch is just the addition of scaling at the callers followed by inverse scaling at bdrv_is_allocated(). But some code, particularly bdrv_commit(), gets a lot simpler because it no longer has to mess with sectors; also, it is now possible to pass NULL if the caller does not care how much of the image is allocated beyond the initial offset. Leave comments where we can further simplify once a later patch eliminates the need for sector-aligned requests through bdrv_is_allocated(). For ease of review, bdrv_is_allocated_above() will be tackled separately. Signed-off-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-06-26block: change variable names in BlockDriverStateManos Pitsidianakis
Change the 'int count' parameter in *pwrite_zeros, *pdiscard related functions (and some others) to 'int bytes', as they both refer to bytes. This helps with code legibility. Signed-off-by: Manos Pitsidianakis <el13635@mail.ntua.gr> Message-id: 20170609101808.13506-1-el13635@mail.ntua.gr Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-05-11qemu-io: Switch 'map' output to byte-based reportingEric Blake
Mixing byte offset and sector allocation counts is a bit confusing. Also, reporting n/m sectors, where m decreases according to the remaining size of the file, isn't really adding any useful information; and reporting an offset at both the front and end of the line, with large amounts of whitespace, is pointless. Update the output to use byte counts and shorter lines, then adjust the affected tests (./check -qcow2 102, ./check -vpc 146). Note that 'qemu-io map' is MUCH weaker than 'qemu-img map'; the former only shows which regions of the active layer are allocated, without regards to where the allocation comes from or whether the allocated portion is known to read as zero (because it is using the weaker bdrv_is_allocated()); while the latter (especially in --output=json mode) reports more details from bdrv_get_block_status(). Signed-off-by: Eric Blake <eblake@redhat.com> Message-id: 20170429191419.30051-4-eblake@redhat.com Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-05-11qemu-io: Switch 'alloc' command to byte-based lengthEric Blake
For the 'alloc' command, accepting an offset in bytes but a length in sectors, and reporting output in sectors, is confusing. Do everything in bytes, and adjust the expected output accordingly. Signed-off-by: Eric Blake <eblake@redhat.com> Message-id: 20170429191419.30051-3-eblake@redhat.com Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-05-11qemu-io: Improve alignment checksEric Blake
Several copy-and-pasted alignment checks exist in qemu-io, which could use some minor improvements: - Manual comparison against 0x1ff is not as clean as using our alignment macros (QEMU_IS_ALIGNED) from osdep.h. - The error messages aren't quite grammatically correct. Suggested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Suggested-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Eric Blake <eblake@redhat.com> Message-id: 20170429191419.30051-2-eblake@redhat.com Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-04-28block: Add errp to b{lk,drv}_truncate()Max Reitz
For one thing, this allows us to drop the error message generation from qemu-img.c and blockdev.c and instead have it unified in bdrv_truncate(). Signed-off-by: Max Reitz <mreitz@redhat.com> Message-id: 20170328205129.15138-3-mreitz@redhat.com Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-04-11qemu-io-cmds: Use bdrv_coroutine_enterFam Zheng
qemu_coroutine_create associates @co to qemu_aio_context but we poll blk's context below. If the coroutine yields, it may never get resumed again. Use bdrv_coroutine_enter to make sure we are starting the I/O on the right context. Signed-off-by: Fam Zheng <famz@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com>
2017-04-03qemu-io-cmds: Assert that global and nofile commands don't use ct->permsPeter Maydell
It would be a bug for a command with the CMD_NOFILE_OK or CMD_FLAG_GLOBAL flags set to also set the ct->perms field, because the former says "OK for a file not to be open" but the latter is a check on a file. Add an assertion in qemuio_add_command() so we can catch that sort of buggy command definition immediately rather than it being a bug that only manifests when a particular set of command line options is used. (Coverity gets confused about this (CID 1371723) and reports that we might dereference a NULL blk pointer in this case, because it can't tell that that code path never happens with the cmdinfo_t that we have. This commit won't help unconfuse it, but it does fix the underlying issue.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1490967529-4767-1-git-send-email-peter.maydell@linaro.org Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-02-28hmp: Request permissions in qemu-ioKevin Wolf
The HMP command 'qemu-io' is a bit tricky because it wants to work on the original BlockBackend, but additional permissions could be required. The details are explained in a comment in the code, but in summary, just request whatever permissions the current qemu-io command needs. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Acked-by: Fam Zheng <famz@redhat.com>
2017-02-23util/cutils: Change qemu_strtosz*() from int64_t to uint64_tMarkus Armbruster
This will permit its use in parse_option_size(). Cc: Dr. David Alan Gilbert <dgilbert@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> (maintainer:X86) Cc: Kevin Wolf <kwolf@redhat.com> (supporter:Block layer core) Cc: Max Reitz <mreitz@redhat.com> (supporter:Block layer core) Cc: qemu-block@nongnu.org (open list:Block layer core) Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <1487708048-2131-24-git-send-email-armbru@redhat.com>
2017-02-23util/cutils: Return qemu_strtosz*() error and value separatelyMarkus Armbruster
This makes qemu_strtosz(), qemu_strtosz_mebi() and qemu_strtosz_metric() similar to qemu_strtoi64(), except negative values are rejected. Cc: Dr. David Alan Gilbert <dgilbert@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> (maintainer:X86) Cc: Kevin Wolf <kwolf@redhat.com> (supporter:Block layer core) Cc: Max Reitz <mreitz@redhat.com> (supporter:Block layer core) Cc: qemu-block@nongnu.org (open list:Block layer core) Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <1487708048-2131-23-git-send-email-armbru@redhat.com>
2017-02-23util/cutils: Let qemu_strtosz*() optionally reject trailing crapMarkus Armbruster
Change the qemu_strtosz() & friends to return -EINVAL when @endptr is null and the conversion doesn't consume the string completely. Matches how qemu_strtol() & friends work. Only test_qemu_strtosz_simple() passes a null @endptr. No functional change there, because its conversion consumes the string. Simplify callers that use @endptr only to fail when it doesn't point to '\0' to pass a null @endptr instead. Cc: Dr. David Alan Gilbert <dgilbert@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> (maintainer:X86) Cc: Kevin Wolf <kwolf@redhat.com> (supporter:Block layer core) Cc: Max Reitz <mreitz@redhat.com> (supporter:Block layer core) Cc: qemu-block@nongnu.org (open list:Block layer core) Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <1487708048-2131-22-git-send-email-armbru@redhat.com>
2017-02-23util/cutils: New qemu_strtosz()Markus Armbruster
Most callers of qemu_strtosz_suffix() pass QEMU_STRTOSZ_DEFSUFFIX_B. Capture the pattern in new qemu_strtosz(). Inline qemu_strtosz_suffix() into its only remaining caller. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <1487708048-2131-17-git-send-email-armbru@redhat.com>
2017-02-12qemu-io: don't allow I/O operations larger than BDRV_REQUEST_MAX_BYTESAlberto Garcia
Passing a request size larger than BDRV_REQUEST_MAX_BYTES to any of the I/O commands results in an error. While 'read' and 'write' handle the error correctly, 'aio_read' and 'aio_write' hit an assertion: blk_aio_read_entry: Assertion `rwco->qiov->size == acb->bytes' failed. The reason is that the QEMU I/O code cannot handle request sizes larger than BDRV_REQUEST_MAX_BYTES, so this patch makes qemu-io check that all values are within range. Signed-off-by: Alberto Garcia <berto@igalia.com> Message-id: 79f66648c685929a144396bda24d13a207131dcf.1485878688.git.berto@igalia.com [mreitz: Use BDRV_REQUEST_MAX_BYTES instead of INT_MAX] Signed-off-by: Max Reitz <mreitz@redhat.com>
2016-10-31Merge remote-tracking branch 'remotes/mjt/tags/trivial-patches-fetch' into ↵Peter Maydell
staging trivial patches for 2016-10-28 # gpg: Signature made Fri 28 Oct 2016 16:17:51 BST # gpg: using RSA key 0x701B4F6B1A693E59 # gpg: Good signature from "Michael Tokarev <mjt@tls.msk.ru>" # gpg: aka "Michael Tokarev <mjt@corpit.ru>" # gpg: aka "Michael Tokarev <mjt@debian.org>" # Primary key fingerprint: 6EE1 95D1 886E 8FFB 810D 4324 457C E0A0 8044 65C5 # Subkey fingerprint: 7B73 BAD6 8BE7 A2C2 8931 4B22 701B 4F6B 1A69 3E59 * remotes/mjt/tags/trivial-patches-fetch: (23 commits) Fix build for less common build directories names clean-up: removed duplicate #includes scripts/clean-includes: added duplicate #include check monitor: deprecate 'default' option qemu-ga: Remove stray 'q' in documentation Makefile: Fix help text for target 'installer' s390: avoid always-true comparison in s390_pci_generate_fid() migration: Remove unneeded NULL check from migrate_fd_error() scripts/hxtool: fix undefined behavour of echo qemu-options.hx: set: fix copy-paste error usb: Change *_exitfn return type from int to void MAINTAINERS: qemu-trivial information colo-compare: remove unused struct CompareChardevProps and 'props' variable milkymist-pfpu: fix potential integer overflow hw/block/nvme: Simplify if-statements a little bit target-lm32: rewrite gen_compare() lm32: milkymist-tmu2: fix integer overflow target-lm32: disable asm logging via LOG_DIS() target-lm32: swap operand of wcsr in LOG_DIS() target-lm32: fix LOG_DIS operand order ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-10-28clean-up: removed duplicate #includesAnand J
Some files contain multiple #includes of the same header file. Removed most of those unnecessary duplicate entries using scripts/clean-includes. Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Anand J <anand.indukala@gmail.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2016-10-28qemu-io: acquire AioContextPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Message-Id: <1477565348-5458-16-git-send-email-pbonzini@redhat.com> Signed-off-by: Fam Zheng <famz@redhat.com>
2016-10-28block: prepare bdrv_reopen_multiple to release AioContextPaolo Bonzini
After the next patch bdrv_drain_all will have to be called without holding any AioContext. Prepare to do this by adding an AioContext argument to bdrv_reopen_multiple. Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <1477565348-5458-15-git-send-email-pbonzini@redhat.com> Signed-off-by: Fam Zheng <famz@redhat.com>
2016-09-05block: switch blk_write_compressed() to byte-based interfacePavel Butsykin
This is a preparatory patch, which continues the general trend of the transition to the byte-based interfaces. bdrv_check_request() and blk_check_request() are no longer used, thus we can remove them. Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Denis V. Lunev <den@openvz.org> CC: Jeff Cody <jcody@redhat.com> CC: Markus Armbruster <armbru@redhat.com> CC: Eric Blake <eblake@redhat.com> CC: John Snow <jsnow@redhat.com> CC: Stefan Hajnoczi <stefanha@redhat.com> CC: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-07-20block: Convert BB interface to byte-based discardsEric Blake
Change sector-based blk_discard(), blk_co_discard(), and blk_aio_discard() to instead be byte-based blk_pdiscard(), blk_co_pdiscard(), and blk_aio_pdiscard(). NBD gets a lot simpler now that ignoring the unaligned portion of a byte-based discard request is handled under the hood by the block layer. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1468624988-423-6-git-send-email-eblake@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-07-13qemu-io: Use correct range limitationsMax Reitz
create_iovec() has a comment lamenting the lack of SIZE_T_MAX. Since there actually is a SIZE_MAX, use it. Two places use INT_MAX for checking the upper bound of a sector count that is used as an argument for a blk_*() function (blk_discard() and blk_write_compressed(), respectively). BDRV_REQUEST_MAX_SECTORS should be used instead. And finally, do_co_pwrite_zeroes() used to similarly check that the sector count does not exceed INT_MAX. However, this function is now backed by blk_co_pwrite_zeroes() which takes bytes as an argument instead of sectors. Therefore, it should be the byte count that does not exceed INT_MAX, not the sector count. Signed-off-by: Max Reitz <mreitz@redhat.com>
2016-07-13coroutine: move entry argument to qemu_coroutine_createPaolo Bonzini
In practice the entry argument is always known at creation time, and it is confusing that sometimes qemu_coroutine_enter is used with a non-NULL argument to re-enter a coroutine (this happens in block/sheepdog.c and tests/test-coroutine.c). So pass the opaque value at creation time, for consistency with e.g. aio_bh_new. Mostly done with the following semantic patch: @ entry1 @ expression entry, arg, co; @@ - co = qemu_coroutine_create(entry); + co = qemu_coroutine_create(entry, arg); ... - qemu_coroutine_enter(co, arg); + qemu_coroutine_enter(co); @ entry2 @ expression entry, arg; identifier co; @@ - Coroutine *co = qemu_coroutine_create(entry); + Coroutine *co = qemu_coroutine_create(entry, arg); ... - qemu_coroutine_enter(co, arg); + qemu_coroutine_enter(co); @ entry3 @ expression entry, arg; @@ - qemu_coroutine_enter(qemu_coroutine_create(entry), arg); + qemu_coroutine_enter(qemu_coroutine_create(entry, arg)); @ reentry @ expression co; @@ - qemu_coroutine_enter(co, NULL); + qemu_coroutine_enter(co); except for the aforementioned few places where the semantic patch stumbled (as expected) and for test_co_queue, which would otherwise produce an uninitialized variable warning. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-05-25block: Rename blk_write_zeroes()Eric Blake
Commit 983a1600 changed the semantics of blk_write_zeroes() to be byte-based rather than sector-based, but did not change the name, which is an open invitation for other code to misuse the function. Renaming to pwrite_zeroes() makes it more in line with other byte-based interfaces, and will help make it easier to track which remaining write_zeroes interfaces still need conversion. Reported-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2016-05-19qemu-iotests: Fix regression in 136 on aio_read invalidEric Blake
Commit 093ea232 removed the ability for aio_read and aio_write to artificially inflate the invalid statistics counters for block devices, since it no longer flags unaligned offset or length. Add 'aio_read -i' and 'aio_write -i' to restore the ability, and update test 136 to use it. Reported-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Eric Blake <eblake@redhat.com> Message-id: 1463416983-28318-4-git-send-email-eblake@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2016-05-19qemu-io: Fix recent UI updatesEric Blake
Commit 770e0e0e [*] tried to add 'writev -f', but didn't tweak the getopt() call to actually let it work. Likewise, commit c2e001c missed implementing 'aio_write -u -z'. The latter commit also introduced a leak of ctx. [*] does it sound "ech0e" in here? :) Signed-off-by: Eric Blake <eblake@redhat.com> Message-id: 1463416983-28318-2-git-send-email-eblake@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2016-05-19block: Remove bdrv_aio_multiwrite()Kevin Wolf
Since virtio-blk implements request merging itself these days, the only remaining users are test cases for the function. That doesn't make the function exactly useful any more. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2016-05-12qemu-io: Add 'write -z -u' to test MAY_UNMAP flagEric Blake
Make it easier to control whether the BDRV_REQ_MAY_UNMAP flag can be passed through a write_zeroes command, by adding the '-u' flag to qemu-io 'write -z' and 'aio_write -z'. To be useful, the device has to be opened with BDRV_O_UNMAP (done by default in qemu-io, but can be made explicit with '-d unmap'). Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-id: 1462677405-4752-7-git-send-email-eblake@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2016-05-12qemu-io: Add 'write -f' to test FUA flagEric Blake
Make it easier to test block drivers with BDRV_REQ_FUA in .supported_write_flags, by adding the '-f' flag to qemu-io to conditionally pass the flag through to specific writes ('write', 'write -z', 'writev', 'aio_write', 'aio_write -z'). You'll want to use 'qemu-io -t none' to actually make -f useful (as otherwise, the default writethrough mode automatically sets the FUA bit on every write). Signed-off-by: Eric Blake <eblake@redhat.com> Message-id: 1462677405-4752-6-git-send-email-eblake@redhat.com Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2016-05-12qemu-io: Allow unaligned access by defaultEric Blake
There's no reason to require the user to specify a flag just so they can pass in unaligned numbers. Keep 'read -p' and 'write -p' as no-ops so that I don't have to hunt down and update all users of qemu-io, but otherwise make their behavior default as 'read' and 'write'. Also fix 'write -z', 'readv', 'writev', 'writev', 'aio_read', 'aio_write', and 'aio_write -z'. For now, 'read -b', 'write -b', and 'write -c' still require alignment (and 'multiwrite', but that's slated to die soon). qemu-iotest 23 is updated to match, as the only test that was previously explicitly expecting an error on an unaligned request. Signed-off-by: Eric Blake <eblake@redhat.com> Message-id: 1462677405-4752-5-git-send-email-eblake@redhat.com Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2016-05-12qemu-io: Use bool for command line flagsEric Blake
We require a C99 compiler; let's use it to express what we really mean. (Yes, we now have an instance of 'if (bool + bool + bool > 1)', which, although semantically valid C, looks ugly; it gets cleaned up later.) Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-id: 1462677405-4752-4-git-send-email-eblake@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>