aboutsummaryrefslogtreecommitdiff
path: root/memory.c
AgeCommit message (Collapse)Author
2015-10-09memory: allow destroying a non-empty MemoryRegionPaolo Bonzini
This is legal; the MemoryRegion will simply unreference all the existing subregions and possibly bring them down with it as well. However, it requires a bit of care to avoid an infinite loop. Finalizing a memory region cannot trigger an address space update, but memory_region_del_subregion errs on the side of caution and might trigger a spurious update: avoid that by resetting mr->enabled first. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1443689999-12182-2-git-send-email-armbru@redhat.com>
2015-10-05memory: Allow replay of IOMMU mapping notificationsDavid Gibson
When we have guest visible IOMMUs, we allow notifiers to be registered which will be informed of all changes to IOMMU mappings. This is used by vfio to keep the host IOMMU mappings in sync with guest IOMMU mappings. However, unlike with a memory region listener, an iommu notifier won't be told about any mappings which already exist in the (guest) IOMMU at the time it is registered. This can cause problems if hotplugging a VFIO device onto a guest bus which had existing guest IOMMU mappings, but didn't previously have an VFIO devices (and hence no host IOMMU mappings). This adds a memory_region_iommu_replay() function to handle this case. It replays any existing mappings in an IOMMU memory region to a specified notifier. Because the IOMMU memory region doesn't internally remember the granularity of the guest IOMMU it has a small hack where the caller must specify a granularity at which to replay mappings. If there are finer mappings in the guest IOMMU these will be reported in the iotlb structures passed to the notifier which it must handle (probably causing it to flag an error). This isn't new - the VFIO iommu notifier must already handle notifications about guest IOMMU mappings too short for it to represent in the host IOMMU. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Laurent Vivier <lvivier@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-09-18memory: Fix bad error handling in memory_region_init_ram_ptr()Markus Armbruster
Commit ef701d7 screwed up handling of out-of-memory conditions. Before the commit, we report the error and exit(1), in one place. The commit lifts the error handling up the call chain some, to three places. Fine. Except it uses &error_abort in these places, changing the behavior from exit(1) to abort(), and thus undoing the work of commit 3922825 "exec: Don't abort when we can't allocate guest memory". The previous two commits fixed one of the three places, another one was fixed in commit 33e0eb5. This commit fixes the third one. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1441983105-26376-5-git-send-email-armbru@redhat.com> Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
2015-08-13Merge memory_region_init_reservation() into memory_region_init_io()Pavel Fedin
Just specifying ops = NULL in some cases can be more convenient than having two functions. Signed-off-by: Pavel Fedin <p.fedin@samsung.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 78a379ab1b6b30ab497db7971ad336dad1dbee76.1438758065.git.p.fedin@samsung.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-07-27memory: do not add a reference to the owner of aliased regionsPaolo Bonzini
Very often the owner of the aliased region is the same as the owner of the alias region itself. When this happens, the reference count can never go back to 0 and the owner is leaked. This is for example breaking hot-unplug of virtio-pci devices (the device cannot be plugged back again with the same id). Another common use for alias is to transform the system I/O address space into an MMIO regions; in this case the aliased region never dies, so there is no problem. Otherwise the owner is always the same for aliasing and aliased region. I checked all calls to memory_region_init_alias introduced after commit dfde4e6 (memory: add ref/unref calls, 2013-05-06) and they do not need the reference in order to keep the owner of the aliased region alive. Reported-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-07-24memory: count number of active VGA logging clientsPaolo Bonzini
For a board that has multiple framebuffer devices, both of them might want to use DIRTY_MEMORY_VGA on the same memory region. The lack of reference counting in memory_region_set_log makes this very awkward to implement. Suggested-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-07-16memory: fix refcount leak in memory_region_presentPaolo Bonzini
memory_region_present() leaks a reference to a MemoryRegion in the case "mr == container". While fixing it, avoid reference counting altogether for memory_region_present(), by using RCU only. The return value could in principle be already invalid immediately after memory_region_present returns, but presumably the caller knows that and it's using memory_region_present to probe for devices that are unpluggable, or something like that. The RCU critical section is needed anyway, because it protects as->current_map. Reported-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-07-01exec: pull qemu_flush_coalesced_mmio_buffer() into address_space_rw/ld*/st*Paolo Bonzini
As memory_region_read/write_accessor will now be run also without BQL held, we need to move coalesced MMIO flushing earlier in the dispatch process. Cc: Frederic Konrad <fred.konrad@greensocs.com> Message-Id: <1434646046-27150-5-git-send-email-pbonzini@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-07-01memory: Add global-locking property to memory regionsJan Kiszka
This introduces the memory region property "global_locking". It is true by default. By setting it to false, a device model can request BQL-free dispatching of region accesses to its r/w handlers. The actual BQL break-up will be provided in a separate patch. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Cc: Frederic Konrad <fred.konrad@greensocs.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <1434646046-27150-4-git-send-email-pbonzini@redhat.com>
2015-06-05memory: use mr->ram_addr in "is this RAM?" assertionsPaolo Bonzini
mr->terminates alone doesn't guarantee that we are looking at a RAM region. mr->ram_addr also has to be checked, in order to distinguish RAM and I/O regions. So, do the following: 1) add a new define RAM_ADDR_INVALID, and test it in the assertions instead of mr->terminates 2) IOMMU regions were not setting mr->ram_addr to a bogus value, initialize it in the instance_init function so that the new assertions would fire for IOMMU regions as well. Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-06-05memory: replace cpu_physical_memory_reset_dirty() with test-and-clearStefan Hajnoczi
The cpu_physical_memory_reset_dirty() function is sometimes used together with cpu_physical_memory_get_dirty(). This is not atomic since two separate accesses to the dirty memory bitmap are made. Turn cpu_physical_memory_reset_dirty() and cpu_physical_memory_clear_dirty_range_type() into the atomic cpu_physical_memory_test_and_clear_dirty(). Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <1417519399-3166-6-git-send-email-stefanha@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-06-05exec: pass client mask to cpu_physical_memory_set_dirty_rangePaolo Bonzini
This cuts in half the cost of bitmap operations (which will become more expensive when made atomic) during migration on non-VRAM regions. Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-06-05memory: include DIRTY_MEMORY_MIGRATION in the dirty log maskPaolo Bonzini
The separate handling of DIRTY_MEMORY_MIGRATION, which does not call log_start/log_stop callbacks when it changes in a region's dirty logging mask, has caused several bugs. One recent example is commit 4cc856f (kvm-all: Sync dirty-bitmap from kvm before kvm destroy the corresponding dirty_bitmap, 2015-04-02). Another performance problem is that KVM keeps tracking dirty pages after a failed live migration, which causes bad performance due to disallowing huge page mapping. This patch removes the root cause of the problem by reporting DIRTY_MEMORY_MIGRATION changes via log_start and log_stop. Note that we now have to rebuild the FlatView when global dirty logging is enabled or disabled; this ensures that log_start and log_stop callbacks are invoked. This will also be used to make the setting of bitmaps conditional. In general, this patch lets users of the memory API ignore the global state of dirty logging if they handle dirty logging generically per region. Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-06-05memory: track DIRTY_MEMORY_CODE in mr->dirty_log_maskPaolo Bonzini
DIRTY_MEMORY_CODE is only needed for TCG. By adding it directly to mr->dirty_log_mask, we avoid testing for TCG everywhere a region is checked for the enabled/disabled state of dirty logging. Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-06-05memory: prepare for multiple bits in the dirty log maskPaolo Bonzini
When the dirty log mask will also cover other bits than DIRTY_MEMORY_VGA, some listeners may be interested in the overall zero/non-zero value of the dirty log mask; others may be interested in the value of single bits. For this reason, always call log_start/log_stop if bits have respectively appeared or disappeared, and pass the old and new values of the dirty log mask so that listeners can distinguish the kinds of change. For example, KVM checks if dirty logging used to be completely disabled (in log_start) or is now completely disabled (in log_stop). On the other hand, Xen has to check manually if DIRTY_MEMORY_VGA changed, since that is the only bit it cares about. Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-06-05memory: differentiate memory_region_is_logging and ↵Paolo Bonzini
memory_region_get_dirty_log_mask For now memory regions only track DIRTY_MEMORY_VGA individually, but this will change soon. To support this, split memory_region_is_logging in two functions: one that returns a given bit from dirty_log_mask, and one that returns the entire mask. memory_region_is_logging gets an extra parameter so that the compiler flags misuse. While VGA-specific users (including the Xen listener!) will want to keep checking that bit, KVM and vhost check for "any bit except migration" (because migration is handled via the global start/stop listener callbacks). Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-06-05memory: the only dirty memory flag for users is DIRTY_MEMORY_VGAPaolo Bonzini
DIRTY_MEMORY_MIGRATION is triggered by memory_global_dirty_log_start and memory_global_dirty_log_stop, so it cannot be used with memory_region_set_log. Specify this in the documentation and assert it. Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-04-30mtree: also print disabled regionsGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-04-30mtree: tag & indent a bit betterGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-04-30Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell
- miscellaneous cleanups for TCG (Emilio) and NBD (Bogdan) - next part in the thread-safe address_space_* saga: atomic access to the bounce buffer and the map_clients list, from Fam - optional support for linking with tcmalloc, also from Fam - reapplying Peter Crosthwaite's "Respect as_translate_internal length clamp" after fixing the SPARC fallout. - build system fix from Wei Liu - small acpi-build and ioport cleanup by myself # gpg: Signature made Wed Apr 29 09:34:00 2015 BST using RSA key ID 78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" # gpg: WARNING: This key is not certified with sufficiently trusted signatures! # gpg: It is not certain that the signature belongs to the owner. # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: (22 commits) nbd/trivial: fix type cast for ioctl translate-all: use bitmap helpers for PageDesc's bitmap target-i386: disable LINT0 after reset Makefile.target: prepend $libs_softmmu to $LIBS milkymist: do not modify libs-softmmu configure: Add support for tcmalloc exec: Respect as_translate_internal length clamp ioport: reserve the whole range of an I/O port in the AddressSpace ioport: loosen assertions on emulation of 16-bit ports ioport: remove wrong comment ide: there is only one data port gus: clean up MemoryRegionPortio sb16: remove useless mixer_write_indexw sun4m: fix slavio sysctrl and led register sizes acpi-build: remove dependency from ram_addr.h memory: add memory_region_ram_resize dma-helpers: Fix race condition of continue_after_map_failure and dma_aio_cancel exec: Notify cpu_register_map_client caller if the bounce buffer is available exec: Protect map_client_list with mutex linux-user, bsd-user: Remove two calls to cpu_exec_init_all ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-04-27memory: add memory_region_ram_resizePaolo Bonzini
This is a simple MemoryRegion wrapper for qemu_ram_resize. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-04-26memory: Replace io_mem_read/write with memory_region_dispatch_read/writePeter Maydell
Rather than retaining io_mem_read/write as simple wrappers around the memory_region_dispatch_read/write functions, make the latter public and change all the callers to use them, since we need to touch all the callsites anyway to add MemTxAttrs and MemTxResult support. Delete io_mem_read and io_mem_write entirely. (All the callers currently pass MEMTXATTRS_UNSPECIFIED and convert the return value back to bool or ignore it.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
2015-04-26memory: Define API for MemoryRegionOps to take attrs and return statusPeter Maydell
Define an API so that devices can register MemoryRegionOps whose read and write callback functions are passed an arbitrary pointer to some transaction attributes and can return a success-or-failure status code. This will allow us to model devices which: * behave differently for ARM Secure/NonSecure memory accesses * behave differently for privileged/unprivileged accesses * may return a transaction failure (causing a guest exception) for erroneous accesses This patch defines the new API and plumbs the attributes parameter through to the memory.c public level functions io_mem_read() and io_mem_write(), where it is currently dummied out. The success/failure response indication is also propagated out to io_mem_read() and io_mem_write(), which retain the old-style boolean true-for-error return. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
2015-03-17memory: Move owner-less MemoryRegions to /machine/unattachedAndreas Färber
This cleans up the official /machine namespace. In particular /machine/system[0] and /machine/io[0], as well as entries with non-sanitized node names such as "/machine/qemu extended regs[0]". The actual MemoryRegion names remain unchanged. Acked-by: Paolo Bonzini <pbonzini@redhat.com> Tested-by: Alistair Francis <alistair.francis@xilinx.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2015-02-11memory: keep the owner of the AddressSpace alive until do_address_space_destroyPaolo Bonzini
This fixes a use-after-free if do_address_space_destroy is executed too late. Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com> Tested-by: Michael Roth <mdroth@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-02-10memory: unregister AddressSpace MemoryListener within BQLPaolo Bonzini
address_space_destroy_dispatch is called from an RCU callback and hence outside the iothread mutex (BQL). However, after address_space_destroy no new accesses can hit the destroyed AddressSpace so it is not necessary to observe changes to the memory map. Move the memory_listener_unregister call earlier, to make it thread-safe again. Reported-by: Alex Williamson <alex.williamson@redhat.com> Fixes: 374f2981d1f10bc4307f250f24b2a7ddb9b14be0 Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-02-02memory: avoid ref/unref in memory_region_findPaolo Bonzini
Do the entire lookup under RCU, which avoids atomic operations in flatview_ref and flatview_unref. Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-02-02memory: protect current_map by RCUPaolo Bonzini
Replace the flat_view_mutex with RCU, avoiding futex contention for dataplane on large systems and many iothreads. Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-02-02memory: remove assertion on memory_region_destroyJan Kiszka
Now that memory_region_destroy can be called from an RCU callback, checking the BQL-protected global memory_region_transaction_depth does not make much sense. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-01-08memory: API to allocate resizeable RAM MRMichael S. Tsirkin
Add API to allocate resizeable RAM MR. This looks just like regular RAM generally, but has a special property that only a portion of it (used_length) is actually used, and migrated. This used_length size can change across reboots. Follow up patches will change used_length for such blocks at migration, making it easier to extend devices using such RAM (notably ACPI, but in the future thinkably other ROMs) without breaking migration compatibility or wasting ROM (guest) memory. Device is notified on resize, so it can adjust if necessary. Note: nothing prevents making all RAM resizeable in this way. However, reviewers felt that only enabling this selectively will make some class of errors easier to detect. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
2015-01-08memory: add memory_region_set_sizeMichael S. Tsirkin
Add API to change MR size. Will be used internally for RAM resize. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
2014-11-23memory: expose alignment used for allocating RAM as MemoryRegion APIIgor Mammedov
introduce memory_region_get_alignment() that returns underlying memory block alignment or 0 if it's not relevant/implemented for backend. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-10-31Add skip_dump flag to ignore memory region during dumpNikunj A Dadhania
The PCI MMIO might be disabled or the device in the reset state. Make sure we do not dump these memory regions. Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com> Acked-by: Alex Williamson <alex.williamson@redhat.com> CC: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-09-09memory: add parameter errp to memory_region_init_rom_deviceHu Tao
Add parameter errp to memory_region_init_rom_device and update all call sites to propagate the error. Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: Hu Tao <hutao@cn.fujitsu.com> [Propagate the error out of realize. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-09-09memory: add parameter errp to memory_region_init_ramHu Tao
Add parameter errp to memory_region_init_ram and update all call sites to pass in &error_abort. Signed-off-by: Hu Tao <hutao@cn.fujitsu.com> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-09-09exec: add parameter errp to qemu_ram_alloc and qemu_ram_alloc_from_ptrHu Tao
Add parameter errp to qemu_ram_alloc and qemu_ram_alloc_from_ptr so that we can handle errors. Signed-off-by: Hu Tao <hutao@cn.fujitsu.com> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> [Assert ptr != NULL in memory_region_init_ram_ptr. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-09-04memory: Remove object_property_add_child_array()Peter Crosthwaite
Obsoleted by automatic object_property_add() arrayification. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-08-28memory: Lazy init name from QOM name as neededPeter Crosthwaite
To support name retrieval of MemoryRegions that were created dynamically (that is, not via memory_region_init and friends). We cache the name in MemoryRegion's state as object_get_canonical_path_component mallocs the returned value so it's not suitable for direct return to callers. Memory already frees the name field, so this will be garbage collected along with the MR object. Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-08-19Revert "memory: Use canonical path component as the name"Peter Maydell
This reverts commit b0225c2c0d89200a29dc3d0b59d2e87a79cbaeb8 (which breaks building with Xen enabled and also leaks memory). Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-08-19Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell
SCSI changes that enable sending vendor-specific commands via virtio-scsi. Memory changes for QOMification and automatic tracking of MR lifetime. # gpg: Signature made Mon 18 Aug 2014 13:03:09 BST using RSA key ID 9B4D86F2 # gpg: Good signature from "Paolo Bonzini <pbonzini@redhat.com>" # gpg: aka "Paolo Bonzini <bonzini@gnu.org>" * remotes/bonzini/tags/for-upstream: mtree: remove write-only field memory: Use canonical path component as the name memory: Use memory_region_name for name access memory: constify memory_region_name exec: Abstract away ref to memory region names loader: Abstract away ref to memory region names tpm_tis: remove instance_finalize callback memory: remove memory_region_destroy memory: convert memory_region_destroy to object_unparent ioport: split deletion and destruction nic: do not destroy memory regions in cleanup functions vga: do not dynamically allocate chain4_alias sysbus: remove unused function sysbus_del_io qom: object: move unparenting to the child property's release callback qom: object: delete properties before calling instance_finalize virtio-scsi: implement parse_cdb scsi-block, scsi-generic: implement parse_cdb scsi-block: extract scsi_block_is_passthrough scsi-bus: introduce parse_cdb in SCSIDeviceClass and SCSIBusInfo scsi-bus: prepare scsi_req_new for introduction of parse_cdb Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-08-18mtree: remove write-only fieldPaolo Bonzini
ml->printed is never set to true. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-08-18memory: Use canonical path component as the namePeter Crosthwaite
Rather than having the name as separate state. This prepares support for creating a MemoryRegion dynamically (i.e. without memory_region_init() and friends) and the MemoryRegion still getting a usable name. Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-08-18memory: Use memory_region_name for name accessPeter Crosthwaite
Despite being local to memory.c, use the helper function. This prepares support for fully QOMifiying the name field of MR (which will remove this state from MR completely). Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-08-18memory: constify memory_region_namePeter Crosthwaite
It doesn't change the MR and some prospective call sites will have const MRs at hand. Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-08-18memory: remove memory_region_destroyPaolo Bonzini
The function is empty after the previous patch, so remove it. Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-08-18memory: convert memory_region_destroy to object_unparentPaolo Bonzini
Explicitly call object_unparent in the few places where we will re-create the memory region. If the memory region is simply being destroyed as part of device teardown, let QOM handle it. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-08-15memory: Update obsolete comment about AddrRange field typeFam Zheng
We are not 64 bit any more since 08dafab4 memory: use 128-bit integers for sizes and intermediates but the comment is forgotten to be updated. Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-07-01memory: MemoryRegion: Add size propertyPeter Crosthwaite
To allow devices to dynamically resize the device. The motivation is to allow devices with variable size to init their memory_region without size early and then correctly populate size at realize() time. Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-07-01memory: MemoryRegion: Add may-overlap and priority propsPeter Crosthwaite
QOM propertyify the .may-overlap and .priority fields. The setters will re-add the memory as a subregion if needed (i.e. the values change when the memory region is already contained). Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> [Remove setters. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-07-01memory: MemoryRegion: Add container and addr propsPeter Crosthwaite
Expose the already existing .parent and .addr fields as QOM properties. .parent (i.e. the field describing the memory region that contains this one in Memory hierachy) is renamed "container". This is to avoid confusion with the QOM parent. Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> [Remove setters. Do not unref parent on releasing the property. Clean up error propagation. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>