| Age | Commit message (Collapse) | Author |
|---|
|
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
This is useful for 64-bit memory accesses.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
This will be used to split 8-byte access down to two four-byte accesses.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The memory API is able to use smaller/wider accesses than requested,
match that in memory_region_access_valid. Of course, the accepts
callback is still free to reject those accesses.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
We'll use it to implement address_space_access_valid.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
This allows to remove the checks on section->readonly. Simply,
write accesses to ROM will not be considered "direct" and will
go through mr->ops without any special intervention.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
reservation_ops is already doing the same thing.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
This provides the basics for detecting accesses to unassigned memory
as soon as they happen, and also for a simple implementation of
address_space_access_valid.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Even a new address space might have a non-empty FlatView. In order
to initialize it properly, address_space_init should (a) call
memory_region_transaction_commit after the address space is inserted
into the list; (b) force memory_region_transaction_commit to do something.
This bug was latent so far because all address spaces started empty, including
the PCI address space where the bus master region is initially disabled.
However, the target address space of an IOMMU is usually rooted at
get_system_memory(), which might not be empty at the time the IOMMU is created.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
A couple of fields were left uninitialized. This was not observed earlier
because all address spaces were statically allocated. Also free allocation
for those fields.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Avi Kivity <avi.kivity@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Since this is a MemoryListener operation, it only makes sense
on an AddressSpace granularity.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
"Readable" is a very unfortunate name for this flag because even a
rom_device region will always be readable from the guest POV. What
differs is the mapping, just like the comments had to explain already.
Also, readable could currently be understood as being a generic region
flag, but it only applies to rom_device regions.
So rename the flag and the function to modify it after the original term
"ROMD" which could also be interpreted as "ROM direct", i.e. ROM mode
with direct access. In any case, the scope of the flag is clearer now.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
memory_region_find() is similar to registering a MemoryListener and
checking for the MemoryRegionSections that come from a particular
region. There is no reason for this to be limited to a root memory
region.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The collision reports before and after this patch are:
before:
warning: subregion collision cfc/4 (pci-conf-data) vs cf8/4 (pci-conf-idx)
warning: subregion collision 8000000/f8000000 (pci-hole) vs 0/8000000 (ram-below-4g)
warning: subregion collision 100000000/4000000000000000 (pci-hole64) vs 8000000/f8000000 (pci-hole)
warning: subregion collision 4d1/1 (kvm-elcr) vs 4d0/1 (kvm-elcr)
warning: subregion collision fec00000/1000 (kvm-ioapic) vs 8000000/f8000000 (pci-hole)
warning: subregion collision 80/1 (ioport80) vs 7e/2 (kvmvapic)
warning: subregion collision fed00000/400 (hpet) vs 8000000/f8000000 (pci-hole)
warning: subregion collision 81/3 (dma-page) vs 80/1 (ioport80)
warning: subregion collision 8/8 (dma-cont) vs 0/8 (dma-chan)
warning: subregion collision d0/10 (dma-cont) vs c0/10 (dma-chan)
warning: subregion collision 0/80 (ich9-pm) vs 8/8 (dma-cont)
warning: subregion collision 0/80 (ich9-pm) vs 0/8 (dma-chan)
warning: subregion collision 0/80 (ich9-pm) vs 64/1 (i8042-cmd)
warning: subregion collision 0/80 (ich9-pm) vs 60/1 (i8042-data)
warning: subregion collision 0/80 (ich9-pm) vs 61/1 (elcr)
warning: subregion collision 0/80 (ich9-pm) vs 40/4 (kvm-pit)
warning: subregion collision 0/80 (ich9-pm) vs 70/2 (rtc)
warning: subregion collision 0/80 (ich9-pm) vs 20/2 (kvm-pic)
warning: subregion collision 0/80 (ich9-pm) vs 7e/2 (kvmvapic)
warning: subregion collision 4/2 (acpi-cnt) vs 0/4 (acpi-evt)
warning: subregion collision 30/8 (apci-smi) vs 20/10 (apci-gpe0)
warning: subregion collision b0000000/10000000 (pcie-mmcfg) vs 8000000/f8000000 (pci-hole)
after:
warning: subregion collision fec00000/1000 (kvm-ioapic) vs 8000000/f8000000 (pci-hole)
warning: subregion collision fed00000/400 (hpet) vs 8000000/f8000000 (pci-hole)
warning: subregion collision 0/80 (ich9-pm) vs 8/8 (dma-cont)
warning: subregion collision 0/80 (ich9-pm) vs 0/8 (dma-chan)
warning: subregion collision 0/80 (ich9-pm) vs 64/1 (i8042-cmd)
warning: subregion collision 0/80 (ich9-pm) vs 60/1 (i8042-data)
warning: subregion collision 0/80 (ich9-pm) vs 61/1 (elcr)
warning: subregion collision 0/80 (ich9-pm) vs 40/4 (kvm-pit)
warning: subregion collision 0/80 (ich9-pm) vs 70/2 (rtc)
warning: subregion collision 0/80 (ich9-pm) vs 20/2 (kvm-pic)
warning: subregion collision 0/80 (ich9-pm) vs 7e/2 (kvmvapic)
warning: subregion collision b0000000/10000000 (pcie-mmcfg) vs 8000000/f8000000 (pci-hole)
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
A memory size of zero is invalid, and so that edge condition
does not occur.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
We had two copies of a ffs function for longs with subtly different
semantics and, for the one in bitops.h, a confusing name: the result
was off-by-one compared to the library function ffsl.
Unify the functions into one, and solve the name problem by calling
the 0-based functions "bitops_ctzl" and "bitops_ctol" respectively.
This also fixes the build on platforms with ffsl, including Mac OS X
and Windows.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Tested-by: Andreas Färber <afaerber@suse.de>
Tested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
This function avoids having to do two calls, one to test the dirty bit, and
other to reset it.
Signed-off-by: Juan Quintela <quintela@redhat.com>
|
|
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
This makes "info mtree" output readable again.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
Cirrus is triggering this, e.g. during Win2k boot: Changes only on
disabled regions require no topology update when transaction depth drops
to 0 again.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
The memory core drops regions that are hidden by another region (for example,
during BAR sizing), but it doesn't do so correctly if the lower address of the
existing range is below the lower address of the new range.
Example (qemu-system-mips -M malta -kernel vmlinux-2.6.32-5-4kc-malta
-append "console=ttyS0" -nographic -vga cirrus):
Existing range: 10000000-107fffff
New range: 100a0000-100bffff
Correct behaviour: drop new range
Incorrect behaviour: add new range
Fix by taking this case into account (previously we only considered
equal lower boundaries).
Tested-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
target_phys_addr_t is unwieldly, violates the C standard (_t suffixes are
reserved) and its purpose doesn't match the name (most target_phys_addr_t
addresses are not target specific). Replace it with a finger-friendly,
standards conformant hwaddr.
Outstanding patchsets can be fixed up with the command
git rebase -i --exec 'find -name "*.[ch]"
| xargs s/target_phys_addr_t/hwaddr/g' origin
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
* qemu-kvm/memory/urgent:
memory: abort if a memory region is destroyed during a transaction
i440fx: avoid destroying memory regions within a transaction
memory: Make eventfd adhere to device endianness
|
|
Since address spaces can be created dynamically by device hotplug, they
can also be destroyed dynamically.
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
Currently we use a global radix tree to dispatch memory access. This only
works with a single address space; to support multiple address spaces we
make the radix tree a member of AddressSpace (via an intermediate structure
AddressSpaceDispatch to avoid exposing too many internals).
A side effect is that address_space_io also gains a dispatch table. When
we remove all the pre-memory-API I/O registrations, we can use that for
dispatching I/O and get rid of the original I/O dispatch.
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
Using the AddressSpace type reduces confusion, as you can't accidentally
supply the MemoryRegion you're interested in.
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
With this change, memory.c no longer knows anything about special address
spaces, so it is prepared for AddressSpace based DMA.
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
Instead of calling a global function on coalesced mmio changes, which
routes the call to kvm if enabled, add coalesced mmio hooks to
MemoryListener and make kvm use that instead.
The motivation is support for multiple address spaces (which means we
we need to filter the call on the right address space) but the result
is cleaner as well.
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
Destroying a memory region is illegal within a transaction, as until
the transaction is committed, the memory core may hold references to
the region. Add an assert to check for violations of this rule.
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
Our memory API MMIO regions know the concept of device endianness. This
is used to automatically swap endianness between devices and host CPU,
depending on whether buses in between would swizzle the bits.
The ioeventfd value comparison does not adhere to that semantic though.
Probably because nobody has been running ioeventfd on a BE platform and
the only device implementing ioeventfd right now is LE (PCI) based.
So add swizzling to ioeventfd registration / deletion to make the rest
of the code as consistent as possible.
Thanks a lot to Michael Tsirkin to point me towards the right direction.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
Many listeners don't need to respond to all MemoryListener callbacks;
provide suitable no-op defaults instead.
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
Instead of embedding knowledge of the memory and I/O address spaces in the
memory core, maintain a list of all address spaces. This list will later
be extended dynamically for other bus masters.
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
The DMA API will use an AddressSpace to differentiate among different
initiators.
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
AddressSpace contains a member, current_map, of type FlatView. Since we
want to limit the leakage of internal types to public headers, switch to
a pointer to a FlatView. There is no performance impact as this isn't used
during lookups, only address space reconfigurations.
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
exec-obsolete.h used to hold pre-memory-API functions that were used from
device code prior to the transition to the memory API. Now that the
transition is complete, the name no longer describes the file. The
functions still need to be merged better into the memory core, but there's
no danger of anyone using them.
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
Flush pending coalesced MMIO before performing mapping or state changes
that could affect the event orderings or route the buffered requests to
a wrong region.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
|
|
Simplify the code as we are using now only a subset of the original
features of memory_region_update_topology.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
|
|
Wrap also simple operations consisting only of a single step with
memory_region_transaction_begin/commit. This allows to perform
additional steps like coalesced MMIO flushing from a single place.
This requires dropping some micro-optimizations: The skipping of
topology updates after updating disabled or unregistered regions.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
|
|
Instead of flushing pending coalesced MMIO requests on every vmexit,
this provides a mechanism to selectively flush when memory regions
related to the coalesced one are accessed. This first of all includes
the coalesced region itself but can also applied to other regions, e.g.
of the same device, by calling memory_region_set_flush_coalesced.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
|
|
The last argument of find_portio is "write", so this must be true here.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Under Win32, EventNotifiers will not have event_notifier_get_fd, so we
cannot call it in common code such as hw/virtio-pci.c. Pass a pointer to
the notifier, and only retrieve the file descriptor in kvm-specific code.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
This patch resolves a bug in memory listener registration.
"range_add" callback was called on each section of the both
address space (IO and memory space) even if it doesn't match
the address space filter.
Signed-off-by: Julien Grall <julien.grall@citrix.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
Print also I/O ports behind bridges and other aliases.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
The return value of cpu_register_io_memory() is no longer used anywhere, so
we can remove it and all associated data and code.
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
Instead of indirecting via io_mem_region, dispatch directly
through the MemoryRegion obtained from the iotlb or phys_page_find().
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
Commit e58ac72b6a0 ("ioport: change portio_list not to use
memory_region_set_offset()") started using aliases of I/O memory
regions. Since the IORange used for the I/O was contained in the
target region, the alias information (specifically, the offset
into the region) was lost. This broke -vga std.
Fix by allocating an independent object to hold the IORange and
also the new offset.
Note that I/O memory regions were conceptually broken wrt aliases
in a different way: an alias can cause the same region to appear
twice in an address space, but we had just one IORange to service it.
This patch fixes that problem as well, since we can now have multiple
IORange/MemoryRegion associations.
Signed-off-by: Avi Kivity <avi@redhat.com>
|
