aboutsummaryrefslogtreecommitdiff
path: root/hw/gpio
AgeCommit message (Collapse)Author
2021-01-29hw: gpio: implement gpio-pwr driver for qemu reset/poweroffMaxim Uvarov
Implement gpio-pwr driver to allow reboot and poweroff machine. This is simple driver with just 2 gpios lines. Current use case is to reboot and poweroff virt machine in secure mode. Secure pl066 gpio chip is needed for that. Signed-off-by: Maxim Uvarov <maxim.uvarov@linaro.org> Reviewed-by: Hao Wu <wuhaotsh@google.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-11-15nomaintainer: Fix Lesser GPL version numberChetan Pant
There is no "version 2" of the "Lesser" General Public License. It is either "GPL version 2.0" or "Lesser GPL version 2.1". This patch replaces all occurrences of "Lesser GPL version 2" with "Lesser GPL version 2.1" in comment section. This patch contains all the files, whose maintainer I could not get from ‘get_maintainer.pl’ script. Signed-off-by: Chetan Pant <chetan4windows@gmail.com> Message-Id: <20201023124424.20177-1-chetan4windows@gmail.com> Reviewed-by: Thomas Huth <thuth@redhat.com> [thuth: Adapted exec.c and qdev-monitor.c to new location] Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-10-27hw/gpio: Add GPIO model for Nuvoton NPCM7xxHavard Skinnemoen
The NPCM7xx chips have multiple GPIO controllers that are mostly identical except for some minor differences like the reset values of some registers. Each controller controls up to 32 pins. Each individual pin is modeled as a pair of unnamed GPIOs -- one for emitting the actual pin state, and one for driving the pin externally. Like the nRF51 GPIO controller, a gpio level may be negative, which means the pin is not driven, or floating. Reviewed-by: Tyrone Ting <kfting@nuvoton.com> Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-22Merge remote-tracking branch ↵Peter Maydell
'remotes/vivier2/tags/trivial-branch-for-5.2-pull-request' into staging Pull request trivial patches 20200919 # gpg: Signature made Sat 19 Sep 2020 19:43:35 BST # gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C # gpg: issuer "laurent@vivier.eu" # gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full] # gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full] # gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full] # Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C * remotes/vivier2/tags/trivial-branch-for-5.2-pull-request: contrib/: fix some comment spelling errors qapi/: fix some comment spelling errors disas/: fix some comment spelling errors linux-user/: fix some comment spelling errors util/: fix some comment spelling errors scripts/: fix some comment spelling errors docs/: fix some comment spelling errors migration/: fix some comment spelling errors qemu/: fix some comment spelling errors scripts/git.orderfile: Display meson files along with buildsys ones hw/timer/hpet: Fix debug format strings hw/timer/hpet: Remove unused functions hpet_ram_readb, hpet_ram_readw meson: remove empty else and duplicated gio deps manual: escape backslashes in "parsed-literal" blocks ui/spice-input: Remove superfluous forward declaration hw/ppc/ppc4xx_pci: Replace magic value by the PCI_NUM_PINS definition hw/gpio/max7310: Remove impossible check Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-18Use OBJECT_DECLARE_SIMPLE_TYPE when possibleEduardo Habkost
This converts existing DECLARE_INSTANCE_CHECKER usage to OBJECT_DECLARE_SIMPLE_TYPE when possible. $ ./scripts/codeconverter/converter.py -i \ --pattern=AddObjectDeclareSimpleType $(git grep -l '' -- '*.[ch]') Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Acked-by: Paul Durrant <paul@xen.org> Message-Id: <20200916182519.415636-6-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-16hw/gpio/max7310: Remove impossible checkPhilippe Mathieu-Daudé
The max7310_gpio_set() handler is static and only used by qdev_init_gpio_in, initialized with 8 IRQs. The 'line' argument can not be out of the [0-8[ range. Replace the dead code by an assertion. Suggested-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20200910072325.439344-2-f4bug@amsat.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-09-13Merge remote-tracking branch ↵Peter Maydell
'remotes/alistair/tags/pull-riscv-to-apply-20200910' into staging This PR includes multiple fixes and features for RISC-V: - Fixes a bug in printing trap causes - Allows 16-bit writes to the SiFive test device. This fixes the failure to reboot the RISC-V virt machine - Support for the Microchip PolarFire SoC and Icicle Kit - A reafactor of RISC-V code out of hw/riscv # gpg: Signature made Thu 10 Sep 2020 19:08:06 BST # gpg: using RSA key F6C4AC46D4934868D3B8CE8F21E10D29DF977054 # gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [full] # Primary key fingerprint: F6C4 AC46 D493 4868 D3B8 CE8F 21E1 0D29 DF97 7054 * remotes/alistair/tags/pull-riscv-to-apply-20200910: (30 commits) hw/riscv: Sort the Kconfig options in alphabetical order hw/riscv: Drop CONFIG_SIFIVE hw/riscv: Always build riscv_hart.c hw/riscv: Move sifive_test model to hw/misc hw/riscv: Move sifive_uart model to hw/char hw/riscv: Move riscv_htif model to hw/char hw/riscv: Move sifive_plic model to hw/intc hw/riscv: Move sifive_clint model to hw/intc hw/riscv: Move sifive_gpio model to hw/gpio hw/riscv: Move sifive_u_otp model to hw/misc hw/riscv: Move sifive_u_prci model to hw/misc hw/riscv: Move sifive_e_prci model to hw/misc hw/riscv: sifive_u: Connect a DMA controller hw/riscv: clint: Avoid using hard-coded timebase frequency hw/riscv: microchip_pfsoc: Hook GPIO controllers hw/riscv: microchip_pfsoc: Connect 2 Cadence GEMs hw/arm: xlnx: Set all boards' GEM 'phy-addr' property value to 23 hw/net: cadence_gem: Add a new 'phy-addr' property hw/riscv: microchip_pfsoc: Connect a DMA controller hw/dma: Add SiFive platform DMA controller emulation ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org> # Conflicts: # hw/riscv/trace-events
2020-09-12Merge remote-tracking branch ↵Peter Maydell
'remotes/vivier2/tags/trivial-branch-for-5.2-pull-request' into staging trivial patches pull request 20200911 # gpg: Signature made Fri 11 Sep 2020 20:32:27 BST # gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C # gpg: issuer "laurent@vivier.eu" # gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full] # gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full] # gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full] # Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C * remotes/vivier2/tags/trivial-branch-for-5.2-pull-request: target/i386/kvm: Add missing fallthrough comment util/hexdump: Reorder qemu_hexdump() arguments util/hexdump: Convert to take a void pointer argument hw/arm/pxa2xx: Add missing fallthrough comment target/i386/kvm: Rename host_tsx_blacklisted() as host_tsx_broken() test-vmstate: remove unnecessary code in match_interval_mapping_node hw: hyperv: vmbus: Fix 32bit compilation kconfig: fix comment referring to old Makefiles meson.build: tweak sdl-image error message hw/net/e1000e: Remove duplicated write handler for FLSWDATA register hw/net/e1000e: Remove overwritten read handler for STATUS register Makefile: Skip the meson subdir in cscope/TAGS/ctags Makefile: Drop extra phony cscope hw/gpio/max7310: Replace disabled printf() by qemu_log_mask(UNIMP) hw/gpio/omap_gpio: Replace fprintf() by qemu_log_mask(GUEST_ERROR) hw/acpi/tco: Remove unused definitions hw/isa/isa-bus: Replace hw_error() by assert() hw/mips/fuloong2e: Convert pointless error message to an assert() Signed-off-by: Peter Maydell <peter.maydell@linaro.org> # Conflicts: # net/colo-compare.c
2020-09-09hw/riscv: Move sifive_gpio model to hw/gpioBin Meng
This is an effort to clean up the hw/riscv directory. Ideally it should only contain the RISC-V SoC / machine codes plus generic codes. Let's move sifive_gpio model to hw/gpio directory. Note this also removes the trace-events in the hw/riscv directory, since gpio is the only supported trace target in that directory. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1599129623-68957-5-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-09-09hw/gpio/max7310: Replace disabled printf() by qemu_log_mask(UNIMP)Philippe Mathieu-Daudé
Replace disabled printf() by qemu_log_mask(UNIMP). Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20200901104234.92159-3-f4bug@amsat.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-09-09hw/gpio/omap_gpio: Replace fprintf() by qemu_log_mask(GUEST_ERROR)Philippe Mathieu-Daudé
Replace fprintf() by qemu_log_mask(LOG_GUEST_ERROR). Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20200901104234.92159-2-f4bug@amsat.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-09-09Use DECLARE_*CHECKER* macrosEduardo Habkost
Generated using: $ ./scripts/codeconverter/converter.py -i \ --pattern=TypeCheckMacro $(git grep -l '' -- '*.[ch]') Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-12-ehabkost@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-13-ehabkost@redhat.com> Message-Id: <20200831210740.126168-14-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-09Move QOM typedefs and add missing includesEduardo Habkost
Some typedefs and macros are defined after the type check macros. This makes it difficult to automatically replace their definitions with OBJECT_DECLARE_TYPE. Patch generated using: $ ./scripts/codeconverter/converter.py -i \ --pattern=QOMStructTypedefSplit $(git grep -l '' -- '*.[ch]') which will split "typdef struct { ... } TypedefName" declarations. Followed by: $ ./scripts/codeconverter/converter.py -i --pattern=MoveSymbols \ $(git grep -l '' -- '*.[ch]') which will: - move the typedefs and #defines above the type check macros - add missing #include "qom/object.h" lines if necessary Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-9-ehabkost@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-10-ehabkost@redhat.com> Message-Id: <20200831210740.126168-11-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-01hw: Remove superfluous breaksLiao Pingfang
Remove superfluous breaks, as there is a "return" before them. Signed-off-by: Liao Pingfang <liao.pingfang@zte.com.cn> Signed-off-by: Yi Wang <wang.yi59@zte.com.cn> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <1594631126-36631-1-git-send-email-wang.yi59@zte.com.cn> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-08-21meson: convert hw/gpioMarc-André Lureau
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-08-21trace: switch position of headers to what Meson requiresPaolo Bonzini
Meson doesn't enjoy the same flexibility we have with Make in choosing the include path. In particular the tracing headers are using $(build_root)/$(<D). In order to keep the include directives unchanged, the simplest solution is to generate headers with patterns like "trace/trace-audio.h" and place forwarding headers in the source tree such that for example "audio/trace.h" includes "trace/trace-audio.h". This patch is too ugly to be applied to the Makefiles now. It's only a way to separate the changes to the tracing header files from the Meson rewrite of the tracing logic. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-07-10error: Eliminate error_propagate() with Coccinelle, part 1Markus Armbruster
When all we do with an Error we receive into a local variable is propagating to somewhere else, we can just as well receive it there right away. Convert if (!foo(..., &err)) { ... error_propagate(errp, err); ... return ... } to if (!foo(..., errp)) { ... ... return ... } where nothing else needs @err. Coccinelle script: @rule1 forall@ identifier fun, err, errp, lbl; expression list args, args2; binary operator op; constant c1, c2; symbol false; @@ if ( ( - fun(args, &err, args2) + fun(args, errp, args2) | - !fun(args, &err, args2) + !fun(args, errp, args2) | - fun(args, &err, args2) op c1 + fun(args, errp, args2) op c1 ) ) { ... when != err when != lbl: when strict - error_propagate(errp, err); ... when != err ( return; | return c2; | return false; ) } @rule2 forall@ identifier fun, err, errp, lbl; expression list args, args2; expression var; binary operator op; constant c1, c2; symbol false; @@ - var = fun(args, &err, args2); + var = fun(args, errp, args2); ... when != err if ( ( var | !var | var op c1 ) ) { ... when != err when != lbl: when strict - error_propagate(errp, err); ... when != err ( return; | return c2; | return false; | return var; ) } @depends on rule1 || rule2@ identifier err; @@ - Error *err = NULL; ... when != err Not exactly elegant, I'm afraid. The "when != lbl:" is necessary to avoid transforming if (fun(args, &err)) { goto out } ... out: error_propagate(errp, err); even though other paths to label out still need the error_propagate(). For an actual example, see sclp_realize(). Without the "when strict", Coccinelle transforms vfio_msix_setup(), incorrectly. I don't know what exactly "when strict" does, only that it helps here. The match of return is narrower than what I want, but I can't figure out how to express "return where the operand doesn't use @err". For an example where it's too narrow, see vfio_intx_enable(). Silently fails to convert hw/arm/armsse.c, because Coccinelle gets confused by ARMSSE being used both as typedef and function-like macro there. Converted manually. Line breaks tidied up manually. One nested declaration of @local_err deleted manually. Preexisting unwanted blank line dropped in hw/riscv/sifive_e.c. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200707160613.848843-35-armbru@redhat.com>
2020-07-10qom: Don't handle impossible object_property_get_link() failureMarkus Armbruster
Don't handle object_property_get_link() failure that can't happen unless the programmer screwed up, pass &error_abort. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200707160613.848843-25-armbru@redhat.com>
2020-07-10qapi: Use returned bool to check for failure, Coccinelle partMarkus Armbruster
The previous commit enables conversion of visit_foo(..., &err); if (err) { ... } to if (!visit_foo(..., errp)) { ... } for visitor functions that now return true / false on success / error. Coccinelle script: @@ identifier fun =~ "check_list|input_type_enum|lv_start_struct|lv_type_bool|lv_type_int64|lv_type_str|lv_type_uint64|output_type_enum|parse_type_bool|parse_type_int64|parse_type_null|parse_type_number|parse_type_size|parse_type_str|parse_type_uint64|print_type_bool|print_type_int64|print_type_null|print_type_number|print_type_size|print_type_str|print_type_uint64|qapi_clone_start_alternate|qapi_clone_start_list|qapi_clone_start_struct|qapi_clone_type_bool|qapi_clone_type_int64|qapi_clone_type_null|qapi_clone_type_number|qapi_clone_type_str|qapi_clone_type_uint64|qapi_dealloc_start_list|qapi_dealloc_start_struct|qapi_dealloc_type_anything|qapi_dealloc_type_bool|qapi_dealloc_type_int64|qapi_dealloc_type_null|qapi_dealloc_type_number|qapi_dealloc_type_str|qapi_dealloc_type_uint64|qobject_input_check_list|qobject_input_check_struct|qobject_input_start_alternate|qobject_input_start_list|qobject_input_start_struct|qobject_input_type_any|qobject_input_type_bool|qobject_input_type_bool_keyval|qobject_input_type_int64|qobject_input_type_int64_keyval|qobject_input_type_null|qobject_input_type_number|qobject_input_type_number_keyval|qobject_input_type_size_keyval|qobject_input_type_str|qobject_input_type_str_keyval|qobject_input_type_uint64|qobject_input_type_uint64_keyval|qobject_output_start_list|qobject_output_start_struct|qobject_output_type_any|qobject_output_type_bool|qobject_output_type_int64|qobject_output_type_null|qobject_output_type_number|qobject_output_type_str|qobject_output_type_uint64|start_list|visit_check_list|visit_check_struct|visit_start_alternate|visit_start_list|visit_start_struct|visit_type_.*"; expression list args; typedef Error; Error *err; @@ - fun(args, &err); - if (err) + if (!fun(args, &err)) { ... } A few line breaks tidied up manually. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20200707160613.848843-19-armbru@redhat.com>
2020-07-03hw/gpio/zaurus.c: Use LOG_GUEST_ERROR for bad guest register accessesPeter Maydell
Instead of logging guest accesses to invalid register offsets in this device using zaurus_printf() (which just prints to stderr), use the usual qemu_log_mask(LOG_GUEST_ERROR,...). Since this was the only use of the zaurus_printf() macro outside spitz.c, we can move the definition of that macro from sharpsl.h to spitz.c. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20200628142429.17111-14-peter.maydell@linaro.org
2020-06-09hw/unicore32/puv3: Use qemu_log_mask(ERROR) instead of debug printf()Philippe Mathieu-Daudé
Replace some debug printf() calls by qemu_log_mask(LOG_GUEST_ERROR). Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20200524164503.11944-1-f4bug@amsat.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-05-21ARM: PL061: Introduce N_GPIOSGeert Uytterhoeven
Add a definition for the number of GPIO lines controlled by a PL061 instance, and use it instead of the hardcoded magic value 8. Suggested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20200519085143.1376-1-geert+renesas@glider.be Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-05-15qom: Drop parameter @errp of object_property_add() & friendsMarkus Armbruster
The only way object_property_add() can fail is when a property with the same name already exists. Since our property names are all hardcoded, failure is a programming error, and the appropriate way to handle it is passing &error_abort. Same for its variants, except for object_property_add_child(), which additionally fails when the child already has a parent. Parentage is also under program control, so this is a programming error, too. We have a bit over 500 callers. Almost half of them pass &error_abort, slightly fewer ignore errors, one test case handles errors, and the remaining few callers pass them to their own callers. The previous few commits demonstrated once again that ignoring programming errors is a bad idea. Of the few ones that pass on errors, several violate the Error API. The Error ** argument must be NULL, &error_abort, &error_fatal, or a pointer to a variable containing NULL. Passing an argument of the latter kind twice without clearing it in between is wrong: if the first call sets an error, it no longer points to NULL for the second call. ich9_pm_add_properties(), sparc32_ledma_realize(), sparc32_dma_realize(), xilinx_axidma_realize(), xilinx_enet_realize() are wrong that way. When the one appropriate choice of argument is &error_abort, letting users pick the argument is a bad idea. Drop parameter @errp and assert the preconditions instead. There's one exception to "duplicate property name is a programming error": the way object_property_add() implements the magic (and undocumented) "automatic arrayification". Don't drop @errp there. Instead, rename object_property_add() to object_property_try_add(), and add the obvious wrapper object_property_add(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200505152926.18877-15-armbru@redhat.com> [Two semantic rebase conflicts resolved]
2020-05-04hw/gpio/aspeed_gpio: Remove dead assignmentPhilippe Mathieu-Daudé
Fix warning reported by Clang static code analyzer: hw/gpio/aspeed_gpio.c:717:18: warning: Value stored to 'g_idx' during its initialization is never read int set_idx, g_idx = *group_idx; ^~~~~ ~~~~~~~~~~ Reported-by: Clang Static Analyzer Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200422133152.16770-8-philmd@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-04-03hw/gpio/aspeed_gpio.c: Don't directly include assert.hPeter Maydell
Remove a direct include of assert.h -- this is already provided by qemu/osdep.h, and it breaks our rule that the first include must always be osdep.h. In particular we must get the assert() macro via osdep.h to avoid compile failures on mingw (see the comment in osdep.h where we redefine assert() for that platform). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-id: 20200403124712.24826-1-peter.maydell@linaro.org
2020-02-04hw/*/Makefile.objs: Move many .o files to common-objsThomas Huth
We have many files that apparently do not depend on the target CPU configuration, i.e. which can be put into common-obj-y instead of obj-y. This way, the code can be shared for example between qemu-system-arm and qemu-system-aarch64, or the various big and little endian variants like qemu-system-sh4 and qemu-system-sh4eb, so that we do not have to compile the code multiple times anymore. Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20200130133841.10779-1-thuth@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-01-24qdev: set properties with device_class_set_props()Marc-André Lureau
The following patch will need to handle properties registration during class_init time. Let's use a device_class_set_props() setter. spatch --macro-file scripts/cocci-macro-file.h --sp-file ./scripts/coccinelle/qdev-set-props.cocci --keep-comments --in-place --dir . @@ typedef DeviceClass; DeviceClass *d; expression val; @@ - d->props = val + device_class_set_props(d, val) Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20200110153039.1379601-20-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-01-07omap-gpio: remove PROP_PTRMarc-André Lureau
Since clocks are not QOM objects, replace PROP_PTR of clocks with setters methods. Move/adapt the existing TODO comment about a clock framework. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-12-16gpio: fix memory leak in aspeed_gpio_init()PanNengyuan
Address Sanitizer shows memory leak in hw/gpio/aspeed_gpio.c:875 Reported-by: Euler Robot <euler.robot@huawei.com> Signed-off-by: PanNengyuan <pannengyuan@huawei.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 20191119141211.25716-16-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-10-24hw/gpio: Fix property accessors of the AST2600 GPIO 1.8V modelCédric Le Goater
The property names of AST2600 GPIO 1.8V model are one character bigger than the names of the other ASPEED GPIO model. Increase the string buffer size by one and be more strict on the expected pattern of the property name. This fixes the QOM test of the ast2600-evb machine under : Apple LLVM version 10.0.0 (clang-1000.10.44.4) Target: x86_64-apple-darwin17.7.0 Thread model: posix InstalledDir: /Library/Developer/CommandLineTools/usr/bin Cc: Rashmica Gupta <rashmica.g@gmail.com> Fixes: 36d737ee82b2 ("hw/gpio: Add in AST2600 specific implementation") Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 20191023130455.1347-2-clg@kaod.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-10-15hw/gpio: Add in AST2600 specific implementationRashmica Gupta
The AST2600 has the same sets of 3.6v gpios as the AST2400 plus an addtional two sets of 1.8V gpios. Signed-off-by: Rashmica Gupta <rashmica.g@gmail.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org> Acked-by: Joel Stanley <joel@jms.id.au> Message-id: 20190925143248.10000-15-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-09-13hw/gpio: Add basic Aspeed GPIO model for AST2400 and AST2500Rashmica Gupta
GPIO pins are arranged in groups of 8 pins labeled A,B,..,Y,Z,AA,AB,AC. (Note that the ast2400 controller only goes up to group AB). A set has four groups (except set AC which only has one) and is referred to by the groups it is composed of (eg ABCD,EFGH,...,YZAAAB). Each set is accessed and controlled by a bank of 14 registers. These registers operate on a per pin level where each bit in the register corresponds to a pin, except for the command source registers. The command source registers operate on a per group level where bits 24, 16, 8 and 0 correspond to each group in the set. eg. registers for set ABCD: |D7...D0|C7...C0|B7...B0|A7...A0| <- GPIOs |31...24|23...16|15....8|7.....0| <- bit position Note that there are a couple of groups that only have 4 pins. There are two ways that this model deviates from the behaviour of the actual controller: (1) The only control source driving the GPIO pins in the model is the ARM model (as there currently aren't models for the LPC or Coprocessor). (2) None of the registers in the model are reset tolerant (needs integration with the watchdog). Signed-off-by: Rashmica Gupta <rashmica.g@gmail.com> Tested-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 20190904070506.1052-2-clg@kaod.org [clg: fixed missing header files made use of HWADDR_PRIx to fix compilation on windows ] Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-08-16Include hw/qdev-properties.h lessMarkus Armbruster
In my "build everything" tree, changing hw/qdev-properties.h triggers a recompile of some 2700 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). Many places including hw/qdev-properties.h (directly or via hw/qdev.h) actually need only hw/qdev-core.h. Include hw/qdev-core.h there instead. hw/qdev.h is actually pointless: all it does is include hw/qdev-core.h and hw/qdev-properties.h, which in turn includes hw/qdev-core.h. Replace the remaining uses of hw/qdev.h by hw/qdev-properties.h. While there, delete a few superfluous inclusions of hw/qdev-core.h. Touching hw/qdev-properties.h now recompiles some 1200 objects. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Daniel P. Berrangé" <berrange@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <20190812052359.30071-22-armbru@redhat.com>
2019-08-16Include hw/hw.h exactly where neededMarkus Armbruster
In my "build everything" tree, changing hw/hw.h triggers a recompile of some 2600 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). The previous commits have left only the declaration of hw_error() in hw/hw.h. This permits dropping most of its inclusions. Touching it now recompiles less than 200 objects. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20190812052359.30071-19-armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-08-16Include migration/vmstate.h lessMarkus Armbruster
In my "build everything" tree, changing migration/vmstate.h triggers a recompile of some 2700 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). hw/hw.h supposedly includes it for convenience. Several other headers include it just to get VMStateDescription. The previous commit made that unnecessary. Include migration/vmstate.h only where it's still needed. Touching it now recompiles only some 1600 objects. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20190812052359.30071-16-armbru@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-08-16Include hw/irq.h a lot lessMarkus Armbruster
In my "build everything" tree, changing hw/irq.h triggers a recompile of some 5400 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). hw/hw.h supposedly includes it for convenience. Several other headers include it just to get qemu_irq and.or qemu_irq_handler. Move the qemu_irq and qemu_irq_handler typedefs from hw/irq.h to qemu/typedefs.h, and then include hw/irq.h only where it's still needed. Touching it now recompiles only some 500 objects. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20190812052359.30071-13-armbru@redhat.com>
2019-06-12Include qemu/module.h where needed, drop it from qemu-common.hMarkus Armbruster
Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190523143508.25387-4-armbru@redhat.com> [Rebased with conflicts resolved automatically, except for hw/usb/dev-hub.c hw/misc/exynos4210_rng.c hw/misc/bcm2835_rng.c hw/misc/aspeed_scu.c hw/display/virtio-vga.c hw/arm/stm32f205_soc.c; ui/cocoa.m fixed up]
2019-03-25Merge remote-tracking branch 'remotes/stefanha/tags/tracing-pull-request' ↵Peter Maydell
into staging Pull request Compilation fixes and cleanups for QEMU 4.0.0. # gpg: Signature made Mon 25 Mar 2019 15:58:28 GMT # gpg: using RSA key 9CA4ABB381AB73C8 # gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" [full] # gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" [full] # Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8 * remotes/stefanha/tags/tracing-pull-request: trace-events: Fix attribution of trace points to source trace-events: Delete unused trace points scripts/cleanup-trace-events: Update for current practice trace-events: Shorten file names in comments trace-events: Consistently point to docs/devel/tracing.txt trace: avoid SystemTap dtrace(1) warnings on empty files trace: handle tracefs path truncation Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-03-25nrf51_gpio: reflect pull-up/pull-down to IRQsPaolo Bonzini
Some drivers do I2C bitbanging by keeping the output to 0 and flipping the GPIO direction between input and output (see for example in Linux gpio_set_open_drain_value_commit, in drivers/gpio/gpiolib.c). When the GPIO is set to input, the pull-up resistor brings the output to 1, while when the GPIO is set to output, the output driver brings the output to 0. Implement this for the nRF51 GPIO device model. First, if both input and output are floating, and there is a pull-up or pull-down resistor configured, do not just set s->in, but also make any devices listening on the output qemu_irq receive that value. Second, if the pin is driven both internally (output pin) and externally you don't get a short circuit if both sides drive the pin to the same value. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 20190317141001.3346-1-pbonzini@redhat.com [PMM: wrapped long line] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-03-22trace-events: Shorten file names in commentsMarkus Armbruster
We spell out sub/dir/ in sub/dir/trace-events' comments pointing to source files. That's because when trace-events got split up, the comments were moved verbatim. Delete the sub/dir/ part from these comments. Gets rid of several misspellings. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190314180929.27722-3-armbru@redhat.com Message-Id: <20190314180929.27722-3-armbru@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2019-03-07i2c: express dependencies with KconfigPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Yang Zhong <yang.zhong@intel.com> Acked-by: Thomas Huth <thuth@redhat.com> Message-Id: <20190123065618.3520-38-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07kconfig: introduce kconfig filesPaolo Bonzini
The Kconfig files were generated mostly with this script: for i in `grep -ho CONFIG_[A-Z0-9_]* default-configs/* | sort -u`; do set fnord `git grep -lw $i -- 'hw/*/Makefile.objs' ` shift if test $# = 1; then cat >> $(dirname $1)/Kconfig << EOF config ${i#CONFIG_} bool EOF git add $(dirname $1)/Kconfig else echo $i $* fi done sed -i '$d' hw/*/Kconfig for i in hw/*; do if test -d $i && ! test -f $i/Kconfig; then touch $i/Kconfig git add $i/Kconfig fi done Whenever a symbol is referenced from multiple subdirectories, the script prints the list of directories that reference the symbol. These symbols have to be added manually to the Kconfig files. Kconfig.host and hw/Kconfig were created manually. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Yang Zhong <yang.zhong@intel.com> Message-Id: <20190123065618.3520-27-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-02-27i2c: have I2C receive operation return uint8_tCorey Minyard
It is never supposed to fail and cannot return an error, so just have it return the proper type. Have it return 0xff on nothing available, since that's what would happen on a real bus. Signed-off-by: Corey Minyard <cminyard@mvista.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-01-24trace: enforce that every trace-events file has a final newlineDaniel P. Berrangé
When generating the trace-events-all file, the build system simply concatenates all the individual trace-events files. If any one of those files does not have a final newline, the printf format string will have the contents of the first line of the next file appended to it, which is usually a '#' comment. Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Message-id: 20190123120016.4538-3-berrange@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2019-01-11avoid TABs in files that only contain a fewPaolo Bonzini
Most files that have TABs only contain a handful of them. Change them to spaces so that we don't confuse people. disas, standard-headers, linux-headers and libdecnumber are imported from other projects and probably should be exempted from the check. Outside those, after this patch the following files still contain both 8-space and TAB sequences at the beginning of the line. Many of them have a majority of TABs, or were initially committed with all tabs. bsd-user/i386/target_syscall.h bsd-user/x86_64/target_syscall.h crypto/aes.c hw/audio/fmopl.c hw/audio/fmopl.h hw/block/tc58128.c hw/display/cirrus_vga.c hw/display/xenfb.c hw/dma/etraxfs_dma.c hw/intc/sh_intc.c hw/misc/mst_fpga.c hw/net/pcnet.c hw/sh4/sh7750.c hw/timer/m48t59.c hw/timer/sh_timer.c include/crypto/aes.h include/disas/bfd.h include/hw/sh4/sh.h libdecnumber/decNumber.c linux-headers/asm-generic/unistd.h linux-headers/linux/kvm.h linux-user/alpha/target_syscall.h linux-user/arm/nwfpe/double_cpdo.c linux-user/arm/nwfpe/fpa11_cpdt.c linux-user/arm/nwfpe/fpa11_cprt.c linux-user/arm/nwfpe/fpa11.h linux-user/flat.h linux-user/flatload.c linux-user/i386/target_syscall.h linux-user/ppc/target_syscall.h linux-user/sparc/target_syscall.h linux-user/syscall.c linux-user/syscall_defs.h linux-user/x86_64/target_syscall.h slirp/cksum.c slirp/if.c slirp/ip.h slirp/ip_icmp.c slirp/ip_icmp.h slirp/ip_input.c slirp/ip_output.c slirp/mbuf.c slirp/misc.c slirp/sbuf.c slirp/socket.c slirp/socket.h slirp/tcp_input.c slirp/tcpip.h slirp/tcp_output.c slirp/tcp_subr.c slirp/tcp_timer.c slirp/tftp.c slirp/udp.c slirp/udp.h target/cris/cpu.h target/cris/mmu.c target/cris/op_helper.c target/sh4/helper.c target/sh4/op_helper.c target/sh4/translate.c tcg/sparc/tcg-target.inc.c tests/tcg/cris/check_addo.c tests/tcg/cris/check_moveq.c tests/tcg/cris/check_swap.c tests/tcg/multiarch/test-mmap.c ui/vnc-enc-hextile-template.h ui/vnc-enc-zywrle.h util/envlist.c util/readline.c The following have only TABs: bsd-user/i386/target_signal.h bsd-user/sparc64/target_signal.h bsd-user/sparc64/target_syscall.h bsd-user/sparc/target_signal.h bsd-user/sparc/target_syscall.h bsd-user/x86_64/target_signal.h crypto/desrfb.c hw/audio/intel-hda-defs.h hw/core/uboot_image.h hw/sh4/sh7750_regnames.c hw/sh4/sh7750_regs.h include/hw/cris/etraxfs_dma.h linux-user/alpha/termbits.h linux-user/arm/nwfpe/fpopcode.h linux-user/arm/nwfpe/fpsr.h linux-user/arm/syscall_nr.h linux-user/arm/target_signal.h linux-user/cris/target_signal.h linux-user/i386/target_signal.h linux-user/linux_loop.h linux-user/m68k/target_signal.h linux-user/microblaze/target_signal.h linux-user/mips64/target_signal.h linux-user/mips/target_signal.h linux-user/mips/target_syscall.h linux-user/mips/termbits.h linux-user/ppc/target_signal.h linux-user/sh4/target_signal.h linux-user/sh4/termbits.h linux-user/sparc64/target_syscall.h linux-user/sparc/target_signal.h linux-user/x86_64/target_signal.h linux-user/x86_64/termbits.h pc-bios/optionrom/optionrom.h slirp/mbuf.h slirp/misc.h slirp/sbuf.h slirp/tcp.h slirp/tcp_timer.h slirp/tcp_var.h target/i386/svm.h target/sparc/asi.h target/xtensa/core-dc232b/xtensa-modules.inc.c target/xtensa/core-dc233c/xtensa-modules.inc.c target/xtensa/core-de212/core-isa.h target/xtensa/core-de212/xtensa-modules.inc.c target/xtensa/core-fsf/xtensa-modules.inc.c target/xtensa/core-sample_controller/core-isa.h target/xtensa/core-sample_controller/xtensa-modules.inc.c target/xtensa/core-test_kc705_be/core-isa.h target/xtensa/core-test_kc705_be/xtensa-modules.inc.c tests/tcg/cris/check_abs.c tests/tcg/cris/check_addc.c tests/tcg/cris/check_addcm.c tests/tcg/cris/check_addoq.c tests/tcg/cris/check_bound.c tests/tcg/cris/check_ftag.c tests/tcg/cris/check_int64.c tests/tcg/cris/check_lz.c tests/tcg/cris/check_openpf5.c tests/tcg/cris/check_sigalrm.c tests/tcg/cris/crisutils.h tests/tcg/cris/sys.c tests/tcg/i386/test-i386-ssse3.c ui/vgafont.h Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20181213223737.11793-3-pbonzini@redhat.com> Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Acked-by: Richard Henderson <richard.henderson@linaro.org> Acked-by: Eric Blake <eblake@redhat.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-01-07hw/gpio/nrf51_gpio: Add nRF51 GPIO peripheralSteffen Görtz
This adds a model of the nRF51 GPIO peripheral. Reference Manual: http://infocenter.nordicsemi.com/pdf/nRF51_RM_v3.0.pdf The nRF51 series microcontrollers support up to 32 GPIO pins in various configurations. The pins can be used as input pins with pull-ups or pull-down. Furthermore, three different output driver modes per level are available (disconnected, standard, high-current). The GPIO-Peripheral has a mechanism for detecting level changes which is not featured in this model. Signed-off-by: Steffen Görtz <contrib@steffen-goertz.de> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 20190103091119.9367-6-stefanha@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-12-13gpio/puv3_gpio: Convert sysbus init function to realize functionMao Zhongyi
Use DeviceClass rather than SysBusDeviceClass in puv3_gpio_class_init(). Cc: gxt@mprc.pku.edu.cn Cc: peter.maydell@linaro.org Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com> Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20181130093852.20739-8-maozhongyi@cmss.chinamobile.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-01hw/i2c: Use DeviceClass::realize instead of I2CSlaveClass::initPhilippe Mathieu-Daudé
I2CSlaveClass::init is no more used, remove it. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180419212727.26095-3-f4bug@amsat.org> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180528144509.15812-3-armbru@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-01-22Replace all occurances of __FUNCTION__ with __func__Alistair Francis
Replace all occurs of __FUNCTION__ except for the check in checkpatch with the non GCC specific __func__. One line in hcd-musb.c was manually tweaked to pass checkpatch. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Anthony PERARD <anthony.perard@citrix.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> [THH: Removed hunks related to pxa2xx_mmci.c (fixed already)] Signed-off-by: Thomas Huth <thuth@redhat.com>
2017-09-21hw/gpio/omap_gpio.c: Don't use old_mmioPeter Maydell
Drop the use of old_mmio in the omap2_gpio memory ops. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 1505580378-9044-3-git-send-email-peter.maydell@linaro.org
generated by cgit v1.2.3 (git 2.25.1) at 2024-05-16 21:08:30 +0000