aboutsummaryrefslogtreecommitdiff
path: root/hw/arm/Makefile.objs
AgeCommit message (Collapse)Author
2018-05-04hw/arm/smmuv3: SkeletonPrem Mallappa
This patch implements a skeleton for the smmuv3 device. Datatypes and register definitions are introduced. The MMIO region, the interrupts and the queue are initialized. Only the MMIO read operation is implemented here. Signed-off-by: Prem Mallappa <prem.mallappa@broadcom.com> Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1524665762-31355-5-git-send-email-eric.auger@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-05-04hw/arm/smmu-common: smmu base device and datatypesEric Auger
The patch introduces the smmu base device and class for the ARM smmu. Devices for specific versions will be derived from this base device. We also introduce some important datatypes. Signed-off-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Prem Mallappa <prem.mallappa@broadcom.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1524665762-31355-2-git-send-email-eric.auger@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-03-09hw/arm: Use more CONFIG switches for the object filesThomas Huth
A lot of ARM object files are linked into the executable unconditionally, even though we have corresponding CONFIG switches like CONFIG_PXA2XX or CONFIG_OMAP. We should make sure to use these switches in the Makefile so that the users can disable certain unwanted boards and devices more easily. While we're at it, also add some new switches for the boards that do not have a CONFIG option yet. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-id: 1520266949-29817-1-git-send-email-thuth@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-03-09Implement support for i.MX7 Sabre boardAndrey Smirnov
Implement code needed to set up emulation of MCIMX7SABRE board from NXP. For more info about the HW see: https://www.nxp.com/support/developer-resources/hardware-development-tools/sabre-development-system/sabre-board-for-smart-devices-based-on-the-i.mx-7dual-applications-processors:MCIMX7SABRE Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Jason Wang <jasowang@redhat.com> Cc: Philippe Mathieu-Daudé <f4bug@amsat.org> Cc: Marcel Apfelbaum <marcel.apfelbaum@zoho.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: qemu-devel@nongnu.org Cc: qemu-arm@nongnu.org Cc: yurovsky@gmail.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-03-09i.MX: Add i.MX7 SOC implementation.Andrey Smirnov
The following interfaces are partially or fully emulated: * up to 2 Cortex A9 cores (SMP works with PSCI) * A7 MPCORE (identical to A15 MPCORE) * 4 GPTs modules * 7 GPIO controllers * 2 IOMUXC controllers * 1 CCM module * 1 SVNS module * 1 SRC module * 1 GPCv2 controller * 4 eCSPI controllers * 4 I2C controllers * 7 i.MX UART controllers * 2 FlexCAN controllers * 2 Ethernet controllers (FEC) * 3 SD controllers (USDHC) * 4 WDT modules * 1 SDMA module * 1 GPR module * 2 USBMISC modules * 2 ADC modules * 1 PCIe controller Tested to boot and work with upstream Linux (4.13+) guest. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> [PMM: folded a couple of long lines] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-03-02mps2-an505: New board model: MPS2 with AN505 Cortex-M33 FPGA imagePeter Maydell
Define a new board model for the MPS2 with an AN505 FPGA image containing a Cortex-M33. Since the FPGA images for TrustZone cores (AN505, and the similar AN519 for Cortex-M23) have a significantly different layout of devices to the non-TrustZone images, we use a new source file rather than shoehorning them into the existing mps2.c. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180220180325.29818-20-peter.maydell@linaro.org
2018-03-02hw/arm/iotkit: Model Arm IOT KitPeter Maydell
Model the Arm IoT Kit documented in http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.ecm0601256/index.html The Arm IoT Kit is a subsystem which includes a CPU and some devices, and is intended be extended by adding extra devices to form a complete system. It is used in the MPS2 board's AN505 image for the Cortex-M33. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180220180325.29818-19-peter.maydell@linaro.org
2018-01-26aarch64-softmmu.mak: Use an ARM specific configAlistair Francis
In preperation for having an ARM and MicroBlaze ZynqMP machine let's split out the current ARM specific config options. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Acked-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2017-09-21msf2: Add Emcraft's Smartfusion2 SOM kitpull-target-arm-20170921Subbaraya Sundeep
Emulated Emcraft's Smartfusion2 System On Module starter kit. Signed-off-by: Subbaraya Sundeep <sundeep.lkml@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20170920201737.25723-6-f4bug@amsat.org [PMD: drop cpu_model to directly use cpu type] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-09-21msf2: Add Smartfusion2 SoCSubbaraya Sundeep
Smartfusion2 SoC has hardened Microcontroller subsystem and flash based FPGA fabric. This patch adds support for Microcontroller subsystem in the SoC. Signed-off-by: Subbaraya Sundeep <sundeep.lkml@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20170920201737.25723-5-f4bug@amsat.org [PMD: drop cpu_model to directly use cpu type, check m3clk non null] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-09-14xlnx-ep108: Rename to ZCU102Alistair Francis
The EP108 is a early access development board. Now that silicon is in production people have access to the ZCU102. Let's rename the internal QEMU files and variables to use the ZCU102. There is no functional change here as the EP108 is still a valid board option. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-07-17hw/arm/mps2: Implement skeleton mps2-an385 and mps2-an511 board modelsPeter Maydell
Model the ARM MPS2/MPS2+ FPGA based development board. The MPS2 and MPS2+ dev boards are FPGA based (the 2+ has a bigger FPGA but is otherwise the same as the 2). Since the CPU itself and most of the devices are in the FPGA, the details of the board as seen by the guest depend significantly on the FPGA image. We model the following FPGA images: "mps2_an385" -- Cortex-M3 as documented in ARM Application Note AN385 "mps2_an511" -- Cortex-M3 'DesignStart' as documented in AN511 They are fairly similar but differ in the details for some peripherals. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1500029487-14822-2-git-send-email-peter.maydell@linaro.org Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
2016-09-22palmetto-bmc: rename the Aspeed board file to aspeed.cCédric Le Goater
We plan to add more Aspeed boards to this file. There are no changes in the code. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1473438177-26079-5-git-send-email-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-09-22ast2400: rename the Aspeed SoC files to aspeed_socCédric Le Goater
Let's prepare for new Aspeed SoCs and rename the ast2400 file to a more generic one. There are no changes in the code apart from the header file include. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1473438177-26079-2-git-send-email-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-05-12i.MX: Add sabrelite i.MX6 emulation.Jean-Christophe DUBOIS
The sabrelite supports one SPI FLASH memory on SPI1 Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-05-12i.MX: Add i.MX6 SOC implementation.Jean-Christophe DUBOIS
For now we only support the following devices: * up to 4 Cortex A9 cores * A9 MPCORE (SCU, GIC, TWD) * 5 i.MX UARTs * 2 EPIT timers * 1 GPT timer * 3 I2C controllers * 7 GPIO controllers * 6 SDHC controllers * 5 SPI controllers * 1 CCM device * 1 SRC device * various ROM/RAM areas. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-03-16hw/arm: Add palmetto-bmc machineAndrew Jeffery
The new machine is a thin layer over the AST2400 ARM926-based SoC[1]. Between the minimal machine and the current SoC implementation there is enough functionality to boot an aspeed_defconfig Linux kernel to userspace. Nothing yet is specific to the Palmetto's BMC (other than using an AST2400 SoC), but creating specific machine types is preferable to a generic machine that doesn't match any particular hardware. [1] http://www.aspeedtech.com/products.php?fPath=20&rId=376 Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Message-id: 1458096317-25223-5-git-send-email-andrew@aj.id.au Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-03-16hw/arm: Add ASPEED AST2400 SoC modelAndrew Jeffery
While the ASPEED AST2400 SoC[1] has a broad range of capabilities this implementation is minimal, comprising an ARM926 processor, ASPEED VIC and timer devices, and a 8250 UART. [1] http://www.aspeedtech.com/products.php?fPath=20&rId=376 Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Message-id: 1458096317-25223-4-git-send-email-andrew@aj.id.au Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-02-03raspi: add raspberry pi 2 machinepull-target-arm-20160203Andrew Baumann
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-02-03bcm2836: add bcm2836 SoC deviceAndrew Baumann
This is the SoC for Raspberry Pi 2. Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-02-03bcm2835_peripherals: add rollup device for bcm2835 peripheralsAndrew Baumann
This device maintains all the non-CPU peripherals on bcm2835 (Pi1) which are also present on bcm2836 (Pi2). It also implements the private address spaces used for DMA and mailboxes. Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-09-07i.MX: Add the i.MX25 PDK platformJean-Christophe Dubois
Tested by booting a minimal Linux system on the emulated platform Tested by booting the Xvisor hypervisor on the emulated platform Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Message-id: d27347300d253509d921bc27a6d0a14db877478b.1441057361.git.jcd@tribudubois.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-09-07i.MX: Add SOC support for i.MX25Jean-Christophe Dubois
For now we support the following devices: * CPU: ARM926 * Interrupt Controller: AVIC * CCM * UART x 5 * EPIT x 2 * GPT x 4 * FEC * I2C x 3 Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Message-id: 62218bfa90f9101f79098e768c3d58bd92dcb7f3.1441057361.git.jcd@tribudubois.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-09-07i.MX: Add SOC support for i.MX31Jean-Christophe Dubois
For now we support the following devices: * CPU: ARM1136 * Interrupt Controller: AVIC * CCM * UART x 2 * EPIT x 2 * GPT Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: f146d819594e41568daec42a1d0f440cdfe3df76.1441057361.git.jcd@tribudubois.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-02hw/arm/sysbus-fdt: helpers for platform bus nodes additionEric Auger
This new C module will be used by ARM machine files to generate platform bus node and their dynamic sysbus device tree nodes. Dynamic sysbus device node addition is done in a machine init done notifier. arm_register_platform_bus_fdt_creator does the registration of this latter and is supposed to be called by ARM machine files that support platform bus and their dynamic sysbus. Addition of dynamic sysbus nodes is done only if the user did not provide any dtb. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Eric Auger <eric.auger@linaro.org> Reviewed-by: Shannon Zhao <zhaoshenglong@huawei.com> Reviewed-by: Alexander Graf <agraf@suse.de> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 1433244554-12898-2-git-send-email-eric.auger@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-05-29hw/arm/virt-acpi-build: Basic framework for building ACPI tables on ARMShannon Zhao
Introduce a preliminary framework in virt-acpi-build.c with the main ACPI build functions. It exposes the generated ACPI contents to guest over fw_cfg. The required ACPI v5.1 tables for ARM are: - RSDP: Initial table that points to XSDT - RSDT: Points to FADT GTDT MADT tables - FADT: Generic information about the machine - GTDT: Generic timer description table - MADT: Multiple APIC description table - DSDT: Holds all information about system devices/peripherals, pointed by FADT Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com> Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-id: 1432522520-8068-5-git-send-email-zhaoshenglong@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-05-18arm: Add xlnx-ep108 machinePeter Crosthwaite
Add a machine model for the Xilinx ZynqMP SoC EP108 board. Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Tested-by: Alistair Francis <alistair.francis@xilinx.com> Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: 3896b34c862f370dc0679e4428bf3848d1f9f83c.1431381507.git.peter.crosthwaite@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-05-18arm: Introduce Xilinx ZynqMP SoCPeter Crosthwaite
With quad Cortex-A53 CPUs. Use SMC PSCI, with the standard policy of secondaries starting in power-off. Tested-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: a16202a6c7b79e446e5289d38cb18d2ee4b897a0.1431381507.git.peter.crosthwaite@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-03-11netduino2: Add the Netduino 2 MachineAlistair Francis
This patch adds the Netduino 2 Machine. This is a Cortex-M3 based machine. Information can be found at: http://www.netduino.com/netduino2/specs.htm Signed-off-by: Alistair Francis <alistair@alistair23.me> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: 5bd999824f14252c122c4501cc973cee986eadd7.1424175342.git.alistair@alistair23.me Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-03-11stm32f205: Add the stm32f205 SoCAlistair Francis
This patch adds the stm32f205 SoC. This will be used by the Netduino 2 to create a machine. Signed-off-by: Alistair Francis <alistair@alistair23.me> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: 48d509747a1ea0d8a7d5480560495e679990f9d2.1424175342.git.alistair@alistair23.me Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-12-17hw/arm: add cubieboard supportliguang
Signed-off-by: liguang <lig.fnst@cn.fujitsu.com> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: 1387159292-10436-6-git-send-email-lig.fnst@cn.fujitsu.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-12-17hw/arm: add allwinner a10 SoC supportliguang
Signed-off-by: liguang <lig.fnst@cn.fujitsu.com> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: 1387159292-10436-5-git-send-email-lig.fnst@cn.fujitsu.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-12-17hw/arm/digic: prepare DIGIC-based boards supportAntony Pavlov
Also this patch adds initial support for Canon PowerShot A1100 IS compact camera. Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Message-id: 1387188908-754-3-git-send-email-antonynpavlov@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-12-17hw/arm: add very initial support for Canon DIGIC SoCAntony Pavlov
DIGIC is Canon Inc.'s name for a family of SoC for digital cameras and camcorders. There is no publicly available specification for DIGIC chips. All information about DIGIC chip internals is based on reverse engineering efforts made by CHDK (http://chdk.wikia.com) and Magic Lantern (http://www.magiclantern.fm) projects contributors. Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Reviewed-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: 1387188908-754-2-git-send-email-antonynpavlov@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-12-10hw/arm: Add 'virt' platformPeter Maydell
Add 'virt' platform support corresponding to arch/arm/mach-virt in the Linux kernel tree. This has no platform-specific code but can use any device whose kernel driver is is able to work purely from a device tree node. We use this to instantiate a minimal set of devices: a GIC and some virtio-mmio transports. Signed-off-by: John Rigby <john.rigby@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Message-id: 1385140638-10444-8-git-send-email-peter.maydell@linaro.org [PMM: Significantly overhauled: * renamed user-facing machine to just "virt" * removed the A9 support (it can't work since the A9 has no generic timers) * added virtio-mmio transports instead of random set of 'soc' devices (though we retain a pl011 UART) * instead of updating io_base as we step through adding devices, define a memory map with an array (similar to vexpress) * similarly, define irqmap with an array * folded in some minor fixes from John's aarch64-support patch * rather than explicitly doing endian-swapping on FDT cells, use fdt APIs that let us just pass in host-endian values and let the fdt layer take care of the swapping * miscellaneous minor code cleanups and style fixes ] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-08-20hw/arm/pic_cpu: Remove the now-unneeded arm_pic_init_cpu()Peter Maydell
Now all the boards have been converted arm_pic_init_cpu() is unused and can just be deleted. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1375977856-25046-15-git-send-email-peter.maydell@linaro.org
2013-04-08hw: move last file to hw/arm/Paolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08hw: move ARM CPU cores to hw/cpu/, configure with default-configs/Paolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08hw: move other devices to hw/misc/, configure with default-configs/Paolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08hw: move GPIO interfaces to hw/gpio/, configure with default-configs/Paolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08hw: move interrupt controllers to hw/intc/, configure with default-configs/Paolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08hw: move DMA controllers to hw/dma/, configure with default-configs/Paolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08hw: move SD/MMC devices to hw/sd/, configure with default-configs/Paolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08hw: move timer devices to hw/timer/, configure with default-configs/Paolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08hw: move char devices to hw/char/, configure via default-configs/Paolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08hw: move SSI controllers to hw/ssi/, configure via default-configs/Paolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08hw: move I2C controllers to hw/i2c/, configure via default-configs/Paolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08hw: move display devices to hw/display/, configure via default-configs/Paolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08hw: move audio devices to hw/audio/, configure via default-configs/Paolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08hw: move block devices to hw/block/, configure via default-configs/Paolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-05-27 15:48:15 +0000