aboutsummaryrefslogtreecommitdiff
path: root/hw/acpi
AgeCommit message (Collapse)Author
2021-01-28qapi: Use QAPI_LIST_APPEND in trivial casesEric Blake
The easiest spots to use QAPI_LIST_APPEND are where we already have an obvious pointer to the tail of a list. While at it, consistently use the variable name 'tail' for that purpose. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20210113221013.390592-5-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2021-01-17acpi: Add addr offset in build_crsJiahui Cen
AML needs Address Translation offset to describe how a bridge translates addresses accross the bridge when using an address descriptor, and especially on ARM, the translation offset of pio resource is usually non zero. Therefore, it's necessary to pass offset for pio, mmio32, mmio64 and bus number into build_crs. Acked-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Jiahui Cen <cenjiahui@huawei.com> Message-Id: <20210114100643.10617-4-cenjiahui@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-12-18qdev: Move softmmu properties to qdev-properties-system.hEduardo Habkost
Move the property types and property macros implemented in qdev-properties-system.c to a new qdev-properties-system.h header. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20201211220529.2290218-16-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-12-09x86: acpi: let the firmware handle pending "CPU remove" events in SMMIgor Mammedov
if firmware and QEMU negotiated CPU hotunplug support, generate _EJ0 method so that it will mark CPU for removal by firmware and pass control to it by triggering SMI. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20201207140739.3829993-6-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-12-09acpi: cpuhp: introduce 'firmware performs eject' status/control bitsIgor Mammedov
Adds bit #4 to status/control field of CPU hotplug MMIO interface. New bit will be used OSPM to mark CPUs as pending for removal by firmware, when it calls _EJ0 method on CPU device node. Later on, when firmware sees this bit set, it will perform CPU eject which will clear bit #4 as well. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20201207140739.3829993-3-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-12-08acpi: Extract crs build form acpi_build.cYubo Miao
Extract crs build form acpi_build.c, the function could also be used to build the crs for pxbs for arm. The resources are composed by two parts: 1. The bar space of pci-bridge/pcie-root-ports 2. The resources needed by devices behind PXBs. The base and limit of memory/io are obtained from the config via two APIs: pci_bridge_get_base and pci_bridge_get_limit Signed-off-by: Yubo Miao <miaoyubo@huawei.com> Signed-off-by: Jiahui Cen <cenjiahui@huawei.com> Message-Id: <20201119014841.7298-5-cenjiahui@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-11-15nomaintainer: Fix Lesser GPL version numberChetan Pant
There is no "version 2" of the "Lesser" General Public License. It is either "GPL version 2.0" or "Lesser GPL version 2.1". This patch replaces all occurrences of "Lesser GPL version 2" with "Lesser GPL version 2.1" in comment section. This patch contains all the files, whose maintainer I could not get from ‘get_maintainer.pl’ script. Signed-off-by: Chetan Pant <chetan4windows@gmail.com> Message-Id: <20201023124424.20177-1-chetan4windows@gmail.com> Reviewed-by: Thomas Huth <thuth@redhat.com> [thuth: Adapted exec.c and qdev-monitor.c to new location] Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-11-15nvdimm: Fix Lesser GPL version numberChetan Pant
There is no "version 2" of the "Lesser" General Public License. It is either "GPL version 2.0" or "Lesser GPL version 2.1". This patch replaces all occurrences of "Lesser GPL version 2" with "Lesser GPL version 2.1" in comment section. Signed-off-by: Chetan Pant <chetan4windows@gmail.com> Message-Id: <20201023123749.19941-1-chetan4windows@gmail.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-11-12ACPI: Avoid infinite recursion when dump-vmstatePeng Liang
There is a field with vmstate_ghes_state as vmsd in vmstate_ghes_state, which will lead to infinite recursion in dump_vmstate_vmsd. Fixes: a08a64627b ("ACPI: Record the Generic Error Status Block address") Reported-by: Euler Robot <euler.robot@huawei.com> Signed-off-by: Peng Liang <liangpeng10@huawei.com> Acked-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20201112020638.874515-1-liangpeng10@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-11-03hw/acpi : add spaces around operatorXinhao Zhang
Fix code style. Operator needs spaces both sides. Signed-off-by: Xinhao Zhang <zhangxinhao1@huawei.com> Signed-off-by: Kai Deng <dengkai1@huawei.com> Message-Id: <20201103102634.273021-3-zhangxinhao1@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-11-03hw/acpi : add space before the open parenthesis '('Xinhao Zhang
Fix code style. Space required before the open parenthesis '('. Signed-off-by: Xinhao Zhang <zhangxinhao1@huawei.com> Signed-off-by: Kai Deng <dengkai1@huawei.com> Message-Id: <20201103102634.273021-2-zhangxinhao1@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-11-03hw/acpi : Don't use '#' flag of printf formatXinhao Zhang
Fix code style. Don't use '#' flag of printf format ('%#') in format strings, use '0x' prefix instead Signed-off-by: Xinhao Zhang <zhangxinhao1@huawei.com> Signed-off-by: Kai Deng <dengkai1@huawei.com> Message-Id: <20201103102634.273021-1-zhangxinhao1@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-10-21acpi: add aml builder stubsGerd Hoffmann
Add stubs for aml_interrupt and aml_memory32_fixed, these will be needed by followup patches, Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Message-id: 20201020074844.5304-2-kraxel@redhat.com
2020-10-13hw/acpi/piix4: Rename piix4_pm_add_propeties() to piix4_pm_add_properties()Greg Kurz
Signed-off-by: Greg Kurz <groug@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Li Qiang <liq3ea@gmail.com> Message-Id: <160165476743.57452.2128307974125615413.stgit@bahia.lan> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-09-29qapi: Extract ACPI commands to 'acpi.json'Philippe Mathieu-Daudé
Only qemu-system-FOO and qemu-storage-daemon provide QMP monitors, therefore such declarations and definitions are irrelevant for user-mode emulation. Extracting the ACPI commands to their own schema reduces the size of the qapi-misc* headers generated, and pulls less QAPI-generated code into user-mode. Suggested-by: Markus Armbruster <armbru@redhat.com> Acked-by: Igor Mammedov <imammedo@redhat.com> Acked-by: Markus Armbruster <armbru@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200913195348.1064154-8-philmd@redhat.com> [Commit message tweaked] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-09-29qapi: Restrict device memory commands to machine codePhilippe Mathieu-Daudé
Only qemu-system-FOO and qemu-storage-daemon provide QMP monitors, therefore such declarations and definitions are irrelevant for user-mode emulation. Restricting the memory commands to machine.json pulls less QAPI-generated code into user-mode. Acked-by: Igor Mammedov <imammedo@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200913195348.1064154-7-philmd@redhat.com> [Commit message tweaked] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-09-29qapi: Restrict query-vm-generation-id command to machine codePhilippe Mathieu-Daudé
Only qemu-system-FOO and qemu-storage-daemon provide QMP monitors, therefore such declarations and definitions are irrelevant for user-mode emulation. Restricting the query-vm-generation-id command to machine.json pulls less QAPI-generated code into user-mode. Acked-by: Igor Mammedov <imammedo@redhat.com> Acked-by: Markus Armbruster <armbru@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200913195348.1064154-5-philmd@redhat.com> [Commit message tweaked] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-09-29piix4: don't reserve hw resources when hotplug is off globallyAni Sinha
When acpi hotplug is turned off for both root pci bus as well as for pci bridges, we should not generate the related ACPI code for DSDT table or initialize related hw ports or reserve hw resources. This change makes sure all those operations are turned off in the case ACPI pci hotplug is off globally. In this change, we also make sure ACPI code for the PCNT method are only added when bsel is enabled for the corresponding pci bus or bridge hotplug is turned on. As q35 machines do not use bsel for it's pci buses at this point in time, this change affects DSDT acpi table for q35 machines as well. Therefore, we will also need to commit the updated golden master DSDT table acpi binary blobs as well. Following is the list of blobs which needs updating: tests/data/acpi/q35/DSDT tests/data/acpi/q35/DSDT.acpihmat tests/data/acpi/q35/DSDT.bridge tests/data/acpi/q35/DSDT.cphp tests/data/acpi/q35/DSDT.dimmpxm tests/data/acpi/q35/DSDT.ipmibt tests/data/acpi/q35/DSDT.memhp tests/data/acpi/q35/DSDT.mmio64 tests/data/acpi/q35/DSDT.numamem tests/data/acpi/q35/DSDT.tis These tables are updated in the following commit. Without the updated table blobs, the unit tests would fail with this patch. Signed-off-by: Ani Sinha <ani@anisinha.ca> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20200918084111.15339-11-ani@anisinha.ca> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-09-29Fix a gap where acpi_pcihp_find_hotplug_bus() returns a non-hotpluggable busAni Sinha
When ACPI hotplug for the root bus is disabled, the bsel property for that bus is not set. Please see the following commit: 3d7e78aa7777f ("Introduce a new flag for i440fx to disable PCI hotplug on the root bus"). As a result, when acpi_pcihp_find_hotplug_bus() is called with bsel set to 0, it may return the root bus. This can cause devices attached to the root bus to get hot-unplugged if the user issues the following set of commmands: outl 0xae10 0 outl 0xae08 your_slot Thanks to Julia for pointing this out here: https://www.mail-archive.com/qemu-devel@nongnu.org/msg734548.html In this patch, we fix the issue in this function by checking if the bus which is returned by the function is actually hotpluggable. If not, we simply return NULL. This avoids the scenario where we were returning a non-hotpluggable bus. Signed-off-by: Ani Sinha <ani@anisinha.ca> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20200918084111.15339-5-ani@anisinha.ca> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-09-29x68: acpi: trigger SMI before sending hotplug Notify event to OSPMIgor Mammedov
In case firmware has negotiated CPU hotplug SMI feature, generate AML to describe SMI IO port region and send SMI to firmware on each CPU hotplug SCI in case new CPUs were hotplugged. Since new CPUs can be hotplugged while CPU_SCAN_METHOD is running we can't send SMI before new CPUs are fetched from QEMU as it could cause sending Notify to a CPU that firmware hasn't seen yet. So fetch new CPUs into local cache first, then send SMI and after that send Notify events to cached CPUs. This should ensure that Notify is sent only to CPUs which were processed by firmware first. Any CPUs that were hotplugged after caching will be processed by the next CPU_SCAN_METHOD, when pending SCI is handled. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Message-Id: <20200923094650.1301166-10-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-09-29acpi: add aml_land() and aml_break() primitivesIgor Mammedov
Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Message-Id: <20200923094650.1301166-5-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-09-29x86: cpuhp: refuse cpu hot-unplug request earlier if not supportedIgor Mammedov
CPU hot-unplug with SMM requires firmware participation to prevent guest crash (i.e. CPU can be removed only after OS _and_ firmware were prepared for the action). Previous patches introduced ICH9_LPC_SMI_F_CPU_HOT_UNPLUG_BIT feature bit, which is advertised by firmware when it has support for CPU hot-unplug. Use it to check if guest is able to handle unplug and make device_del fail gracefully if hot-unplug feature hasn't been negotiated. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Message-Id: <20200923094650.1301166-4-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-09-29x86: cpuhp: prevent guest crash on CPU hotplug when broadcast SMI is in useIgor Mammedov
There were reports of guest crash on CPU hotplug, when using q35 machine type and OVMF with SMM, due to hotplugged CPU trying to process SMI at default SMI handler location without it being relocated by firmware first. Fix it by refusing hotplug if firmware hasn't negotiated CPU hotplug with SMI support while SMI broadcast is in use. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Message-Id: <20200923094650.1301166-3-imammedo@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-09-18Use OBJECT_DECLARE_SIMPLE_TYPE when possibleEduardo Habkost
This converts existing DECLARE_INSTANCE_CHECKER usage to OBJECT_DECLARE_SIMPLE_TYPE when possible. $ ./scripts/codeconverter/converter.py -i \ --pattern=AddObjectDeclareSimpleType $(git grep -l '' -- '*.[ch]') Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Acked-by: Paul Durrant <paul@xen.org> Message-Id: <20200916182519.415636-6-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-17acpi: move acpi_dsdt_add_power_button() to gedGerd Hoffmann
Allow reuse for microvm. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-id: 20200915120909.20838-7-kraxel@redhat.com
2020-09-17acpi: ged: add control regsGerd Hoffmann
Add control regs (sleep, reset) for hw-reduced acpi. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-id: 20200915120909.20838-5-kraxel@redhat.com
2020-09-12Merge remote-tracking branch ↵Peter Maydell
'remotes/vivier2/tags/trivial-branch-for-5.2-pull-request' into staging trivial patches pull request 20200911 # gpg: Signature made Fri 11 Sep 2020 20:32:27 BST # gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C # gpg: issuer "laurent@vivier.eu" # gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full] # gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full] # gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full] # Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C * remotes/vivier2/tags/trivial-branch-for-5.2-pull-request: target/i386/kvm: Add missing fallthrough comment util/hexdump: Reorder qemu_hexdump() arguments util/hexdump: Convert to take a void pointer argument hw/arm/pxa2xx: Add missing fallthrough comment target/i386/kvm: Rename host_tsx_blacklisted() as host_tsx_broken() test-vmstate: remove unnecessary code in match_interval_mapping_node hw: hyperv: vmbus: Fix 32bit compilation kconfig: fix comment referring to old Makefiles meson.build: tweak sdl-image error message hw/net/e1000e: Remove duplicated write handler for FLSWDATA register hw/net/e1000e: Remove overwritten read handler for STATUS register Makefile: Skip the meson subdir in cscope/TAGS/ctags Makefile: Drop extra phony cscope hw/gpio/max7310: Replace disabled printf() by qemu_log_mask(UNIMP) hw/gpio/omap_gpio: Replace fprintf() by qemu_log_mask(GUEST_ERROR) hw/acpi/tco: Remove unused definitions hw/isa/isa-bus: Replace hw_error() by assert() hw/mips/fuloong2e: Convert pointless error message to an assert() Signed-off-by: Peter Maydell <peter.maydell@linaro.org> # Conflicts: # net/colo-compare.c
2020-09-09vmgenid: Rename VMGENID_DEVICE to TYPE_VMGENIDEduardo Habkost
This will make the type name constant consistent with the name of the type checking macro. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200902224311.1321159-11-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-09Use DECLARE_*CHECKER* macrosEduardo Habkost
Generated using: $ ./scripts/codeconverter/converter.py -i \ --pattern=TypeCheckMacro $(git grep -l '' -- '*.[ch]') Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-12-ehabkost@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-13-ehabkost@redhat.com> Message-Id: <20200831210740.126168-14-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-09Move QOM typedefs and add missing includesEduardo Habkost
Some typedefs and macros are defined after the type check macros. This makes it difficult to automatically replace their definitions with OBJECT_DECLARE_TYPE. Patch generated using: $ ./scripts/codeconverter/converter.py -i \ --pattern=QOMStructTypedefSplit $(git grep -l '' -- '*.[ch]') which will split "typdef struct { ... } TypedefName" declarations. Followed by: $ ./scripts/codeconverter/converter.py -i --pattern=MoveSymbols \ $(git grep -l '' -- '*.[ch]') which will: - move the typedefs and #defines above the type check macros - add missing #include "qom/object.h" lines if necessary Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-9-ehabkost@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-10-ehabkost@redhat.com> Message-Id: <20200831210740.126168-11-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-09hw/acpi/tco: Remove unused definitionsPhilippe Mathieu-Daudé
TCO_DEBUG() and DEBUG definitions are not used, remove them. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20200901101951.85892-1-f4bug@amsat.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-08-27Introduce a new flag for i440fx to disable PCI hotplug on the root busAni Sinha
We introduce a new global flag 'acpi-root-pci-hotplug' for i440fx with which we can turn on or off PCI device hotplug on the root bus. This flag can be used to prevent all PCI devices from getting hotplugged or unplugged from the root PCI bus. This feature is targetted mostly towards Windows VMs. It is useful in cases where some hypervisor admins want to deploy guest VMs in a way so that the users of the guest OSes are not able to hot-eject certain PCI devices from the Windows system tray. Laine has explained the use case here in detail: https://www.redhat.com/archives/libvir-list/2020-February/msg00110.html Julia has resolved this issue for PCIE buses with the following commit: 530a0963184e57e71a5b538 ("pcie_root_port: Add hotplug disabling option") This commit attempts to introduce similar behavior for PCI root buses used in i440fx machine types (although in this case, we do not have a per-slot capability to turn hotplug on or off). Usage: -global PIIX4_PM.acpi-root-pci-hotplug=off By default, this option is enabled which means that hotplug is turned on for the PCI root bus. The previously existing flag 'acpi-pci-hotplug-with-bridge-support' for PCI-PCI bridges remain as is and can be used along with this new flag to control PCI hotplug on PCI bridges. This change has been tested using a Windows 2012R2 server guest image and also with a Windows 2019 server guest image on a Ubuntu 18.04 host using the latest master qemu from upstream. Signed-off-by: Ani Sinha <ani@anisinha.ca> Message-Id: <20200821165403.26589-1-ani@anisinha.ca> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com>
2020-08-21meson: convert hw/acpiMarc-André Lureau
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-08-21trace: switch position of headers to what Meson requiresPaolo Bonzini
Meson doesn't enjoy the same flexibility we have with Make in choosing the include path. In particular the tracing headers are using $(build_root)/$(<D). In order to keep the include directives unchanged, the simplest solution is to generate headers with patterns like "trace/trace-audio.h" and place forwarding headers in the source tree such that for example "audio/trace.h" includes "trace/trace-audio.h". This patch is too ugly to be applied to the Makefiles now. It's only a way to separate the changes to the tracing header files from the Meson rewrite of the tracing logic. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-07-27ACPI: Assert that we don't run out of the preallocated memoryDongjiu Geng
data_length is a constant value, so we use assert instead of condition check. Signed-off-by: Dongjiu Geng <gengdongjiu@huawei.com> Message-id: 20200622113146.33421-1-gengdongjiu@huawei.com Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-07-22acpi: accept byte and word access to core ACPI registersMichael Tokarev
All ISA registers should be accessible as bytes, words or dwords (if wide enough). Fix the access constraints for acpi-pm-evt, acpi-pm-tmr & acpi-cnt registers. Fixes: 5d971f9e67 (memory: Revert "memory: accept mismatching sizes in memory_region_access_valid") Fixes: afafe4bbe0 (apci: switch cnt to memory api) Fixes: 77d58b1e47 (apci: switch timer to memory api) Fixes: b5a7c024d2 (apci: switch evt to memory api) Buglink: https://lore.kernel.org/xen-devel/20200630170913.123646-1-anthony.perard@citrix.com/T/ Buglink: https://bugs.debian.org/964793 BugLink: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=964247 BugLink: https://bugs.launchpad.net/bugs/1886318 Reported-By: Simon John <git@the-jedi.co.uk> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru> Message-Id: <20200720160627.15491-1-mjt@msgid.tls.msk.ru> Cc: qemu-stable@nongnu.org Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-07-10qapi: Smooth another visitor error checking patternMarkus Armbruster
Convert visit_type_FOO(v, ..., &ptr, &err); ... if (err) { ... } to visit_type_FOO(v, ..., &ptr, errp); ... if (!ptr) { ... } for functions that set @ptr to non-null / null on success / error. Eliminate error_propagate() that are now unnecessary. Delete @err that are now unused. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200707160613.848843-40-armbru@redhat.com>
2020-07-10error: Avoid unnecessary error_propagate() after error_setg()Markus Armbruster
Replace error_setg(&err, ...); error_propagate(errp, err); by error_setg(errp, ...); Related pattern: if (...) { error_setg(&err, ...); goto out; } ... out: error_propagate(errp, err); return; When all paths to label out are that way, replace by if (...) { error_setg(errp, ...); return; } and delete the label along with the error_propagate(). When we have at most one other path that actually needs to propagate, and maybe one at the end that where propagation is unnecessary, e.g. foo(..., &err); if (err) { goto out; } ... bar(..., &err); out: error_propagate(errp, err); return; move the error_propagate() to where it's needed, like if (...) { foo(..., &err); error_propagate(errp, err); return; } ... bar(..., errp); return; and transform the error_setg() as above. In some places, the transformation results in obviously unnecessary error_propagate(). The next few commits will eliminate them. Bonus: the elimination of gotos will make later patches in this series easier to review. Candidates for conversion tracked down with this Coccinelle script: @@ identifier err, errp; expression list args; @@ - error_setg(&err, args); + error_setg(errp, args); ... when != err error_propagate(errp, err); Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200707160613.848843-34-armbru@redhat.com>
2020-07-10qom: Put name parameter before value / visitor parameterMarkus Armbruster
The object_property_set_FOO() setters take property name and value in an unusual order: void object_property_set_FOO(Object *obj, FOO_TYPE value, const char *name, Error **errp) Having to pass value before name feels grating. Swap them. Same for object_property_set(), object_property_get(), and object_property_parse(). Convert callers with this Coccinelle script: @@ identifier fun = { object_property_get, object_property_parse, object_property_set_str, object_property_set_link, object_property_set_bool, object_property_set_int, object_property_set_uint, object_property_set, object_property_set_qobject }; expression obj, v, name, errp; @@ - fun(obj, v, name, errp) + fun(obj, name, v, errp) Chokes on hw/arm/musicpal.c's lcd_refresh() with the unhelpful error message "no position information". Convert that one manually. Fails to convert hw/arm/armsse.c, because Coccinelle gets confused by ARMSSE being used both as typedef and function-like macro there. Convert manually. Fails to convert hw/rx/rx-gdbsim.c, because Coccinelle gets confused by RXCPU being used both as typedef and function-like macro there. Convert manually. The other files using RXCPU that way don't need conversion. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20200707160613.848843-27-armbru@redhat.com> [Straightforwad conflict with commit 2336172d9b "audio: set default value for pcspk.iobase property" resolved]
2020-07-02qdev: Drop qbus_set_hotplug_handler() parameter @errpMarkus Armbruster
qbus_set_hotplug_handler() is a simple wrapper around object_property_set_link(). object_property_set_link() fails when the property doesn't exist, is not settable, or its .check() method fails. These are all programming errors here, so passing &error_abort to qbus_set_hotplug_handler() is appropriate. Most of its callers do. Exceptions: * pcie_cap_slot_init(), shpc_init(), spapr_phb_realize() pass NULL, i.e. they ignore errors. * spapr_machine_init() passes &error_fatal. * s390_pcihost_realize(), virtio_serial_device_realize(), s390_pcihost_plug() pass the error to their callers. The latter two keep going after the error, which looks wrong. Drop the @errp parameter, and instead pass &error_abort to object_property_set_link(). Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Daniel P. Berrangé" <berrange@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20200630090351.1247703-15-armbru@redhat.com>
2020-06-24Rename use_acpi_pci_hotplug to more appropriate use_acpi_hotplug_bridgeAni Sinha
Currently, the option use_acpi_pci_hotplug is being used to control device hotplug capability using ACPI for slots of cold plugged bridges. Hence, we are renaming this option to better reflect what it actually does. Signed-off-by: Ani Sinha <ani.sinha@nutanix.com> Message-Id: <1592310699-58916-1-git-send-email-ani.sinha@nutanix.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Ani Sinha <ani.sinha@nutanix.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-06-24acpi: Some build_tpm2() code reshapeEric Auger
Remove any reference to Acpi20TPM2 and adopt an implementation similar to build_ghes_v2(). Signed-off-by: Eric Auger <eric.auger@redhat.com> Suggested-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Stefan Berger <stefanb@linux.ibm.com> Tested-by: Stefan Berger <stefanb@linux.ibm.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20200622140620.17229-2-eric.auger@redhat.com> Tested-by: Ard Biesheuvel <ardb@kernel.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-06-23arm/virt: Add memory hot remove supportpull-target-arm-20200623Shameer Kolothum
This adds support for memory(pc-dimm) hot remove on arm/virt that uses acpi ged device. NVDIMM hot removal is not yet supported. Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com> Message-id: 20200622124157.20360-1-shameerali.kolothum.thodi@huawei.com Reviewed-by: Eric Auger <eric.auger@redhat.com> Tested-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-06-15pci: Convert uses of pci_create() etc. with CoccinelleMarkus Armbruster
Replace dev = pci_create(bus, type_name); ... qdev_init_nofail(dev); by dev = pci_new(type_name); ... pci_realize_and_unref(dev, bus, &error_fatal); and similarly for pci_create_multifunction(). Recent commit "qdev: New qdev_new(), qdev_realize(), etc." explains why. Coccinelle script: @@ expression dev, bus, expr; expression list args; @@ - dev = pci_create(bus, args); + dev = pci_new(args); ... when != dev = expr - qdev_init_nofail(&dev->qdev); + pci_realize_and_unref(dev, bus, &error_fatal); @@ expression dev, bus, expr; expression list args; expression d; @@ - dev = pci_create(bus, args); + dev = pci_new(args); ( d = &dev->qdev; | d = DEVICE(dev); ) ... when != dev = expr - qdev_init_nofail(d); + pci_realize_and_unref(dev, bus, &error_fatal); @@ expression dev, bus, expr; expression list args; @@ - dev = pci_create(bus, args); + dev = pci_new(args); ... when != dev = expr - qdev_init_nofail(DEVICE(dev)); + pci_realize_and_unref(dev, bus, &error_fatal); @@ expression dev, bus, expr; expression list args; @@ - dev = DEVICE(pci_create(bus, args)); + PCIDevice *pci_dev; // TODO move + pci_dev = pci_new(args); + dev = DEVICE(pci_dev); ... when != dev = expr - qdev_init_nofail(dev); + pci_realize_and_unref(pci_dev, bus, &error_fatal); @@ expression dev, bus, expr; expression list args; @@ - dev = pci_create_multifunction(bus, args); + dev = pci_new_multifunction(args); ... when != dev = expr - qdev_init_nofail(&dev->qdev); + pci_realize_and_unref(dev, bus, &error_fatal); @@ expression bus, expr; expression list args; identifier dev; @@ - PCIDevice *dev = pci_create_multifunction(bus, args); + PCIDevice *dev = pci_new_multifunction(args); ... when != dev = expr - qdev_init_nofail(&dev->qdev); + pci_realize_and_unref(dev, bus, &error_fatal); @@ expression dev, bus, expr; expression list args; @@ - dev = pci_create_multifunction(bus, args); + dev = pci_new_multifunction(args); ... when != dev = expr - qdev_init_nofail(DEVICE(dev)); + pci_realize_and_unref(dev, bus, &error_fatal); Missing #include "qapi/error.h" added manually, whitespace changes minimized manually, @pci_dev declarations moved manually. Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-16-armbru@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
2020-06-15qdev: Convert to qdev_unrealize() with CoccinelleMarkus Armbruster
For readability, and consistency with qbus_realize(). Coccinelle script: @ depends on !(file in "hw/core/qdev.c")@ typedef DeviceState; DeviceState *dev; symbol false, error_abort; @@ - object_property_set_bool(OBJECT(dev), false, "realized", &error_abort); + qdev_unrealize(dev); @ depends on !(file in "hw/core/qdev.c") && !(file in "hw/core/bus.c")@ expression dev; symbol false, error_abort; @@ - object_property_set_bool(OBJECT(dev), false, "realized", &error_abort); + qdev_unrealize(DEVICE(dev)); Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-8-armbru@redhat.com>
2020-06-12Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell
* Miscellaneous fixes and feature enablement (many) * SEV refactoring (David) * Hyper-V initial support (Jon) * i386 TCG fixes (x87 and SSE, Joseph) * vmport cleanup and improvements (Philippe, Liran) * Use-after-free with vCPU hot-unplug (Nengyuan) * run-coverity-scan improvements (myself) * Record/replay fixes (Pavel) * -machine kernel_irqchip=split improvements for INTx (Peter) * Code cleanups (Philippe) * Crash and security fixes (PJP) * HVF cleanups (Roman) # gpg: Signature made Fri 12 Jun 2020 16:57:04 BST # gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83 # gpg: issuer "pbonzini@redhat.com" # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full] # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full] # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: (116 commits) target/i386: Remove obsolete TODO file stubs: move Xen stubs to accel/ replay: fix replay shutdown for console mode exec/cpu-common: Move MUSB specific typedefs to 'hw/usb/hcd-musb.h' hw/usb: Move device-specific declarations to new 'hcd-musb.h' header exec/memory: Remove unused MemoryRegionMmio type checkpatch: reversed logic with acpi test checks target/i386: sev: Unify SEVState and SevGuestState target/i386: sev: Remove redundant handle field target/i386: sev: Remove redundant policy field target/i386: sev: Remove redundant cbitpos and reduced_phys_bits fields target/i386: sev: Partial cleanup to sev_state global target/i386: sev: Embed SEVState in SevGuestState target/i386: sev: Rename QSevGuestInfo target/i386: sev: Move local structure definitions into .c file target/i386: sev: Remove unused QSevGuestInfoClass xen: fix build without pci passthrough i386: hvf: Drop HVFX86EmulatorState i386: hvf: Move mmio_buf into CPUX86State i386: hvf: Move lazy_flags into CPUX86State ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org> # Conflicts: # hw/i386/acpi-build.c
2020-06-12acpi: ged: rename event memory regionGerd Hoffmann
Rename memory region and callbacks and ops to carry "evt" in the name because a second region will be added shortly. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Message-Id: <20200520132003.9492-10-kraxel@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Igor Mammedow <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-06-12acpi: fadt: add hw-reduced sleep register supportGerd Hoffmann
Add fields to struct AcpiFadtData and update build_fadt() to properly generate sleep register entries. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20200520132003.9492-9-kraxel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-06-10accel: Move Xen accelerator code under accel/xen/Philippe Mathieu-Daudé
This code is not related to hardware emulation. Move it under accel/ with the other hypervisors. Reviewed-by: Paul Durrant <paul@xen.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200508100222.7112-1-philmd@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-06-09arm/acpi: TPM2 ACPI table supportEric Auger
Add a TPM2 ACPI table if a TPM2.0 sysbus device has been dynamically instantiated. Signed-off-by: Eric Auger <eric.auger@redhat.com> Message-Id: <20200601095737.32671-4-eric.auger@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-06-19 12:02:46 +0000