aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-10-31block/ssh: Add InetSocketAddress and accept itAshijeet Acharya
Add InetSocketAddress compatibility to SSH driver. Add a new option "server" to the SSH block driver which then accepts a InetSocketAddress. "host" and "port" are supported as legacy options and are mapped to their InetSocketAddress representation. Signed-off-by: Ashijeet Acharya <ashijeetacharya@gmail.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-10-31util/qemu-sockets: Make inet_connect_saddr() publicAshijeet Acharya
Make inet_connect_saddr() in util/qemu-sockets.c public in order to be able to use it with InetSocketAddress sockets outside of util/qemu-sockets.c independently. Signed-off-by: Ashijeet Acharya <ashijeetacharya@gmail.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-10-31block/ssh: Add ssh_has_filename_options_conflict()Ashijeet Acharya
We have 5 options plus ("server") option which is added in the next patch that conflict with specifying a SSH filename. We need to iterate over all the options to check whether its key has an "server." prefix. This iteration will help us adding the new option "server" easily. Signed-off-by: Ashijeet Acharya <ashijeetacharya@gmail.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-10-31Merge remote-tracking branch 'remotes/cohuck/tags/s390x-20161031' into stagingPeter Maydell
Two PCI fixes/improvements for s390x. # gpg: Signature made Mon 31 Oct 2016 10:09:24 GMT # gpg: using RSA key 0xDECF6B93C6F02FAF # gpg: Good signature from "Cornelia Huck <huckc@linux.vnet.ibm.com>" # gpg: aka "Cornelia Huck <cornelia.huck@de.ibm.com>" # Primary key fingerprint: C3D0 D66D C362 4FF6 A8C0 18CE DECF 6B93 C6F0 2FAF * remotes/cohuck/tags/s390x-20161031: s390x/pci: Check memory region dispatching callbacks s390x/pci: use generic interface to inject interrupt Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-10-31Merge remote-tracking branch 'remotes/amit-migration/tags/migration-for-2.8' ↵Peter Maydell
into staging Migration bits from the COLO project # gpg: Signature made Sun 30 Oct 2016 10:39:55 GMT # gpg: using RSA key 0xEB0B4DFC657EF670 # gpg: Good signature from "Amit Shah <amit@amitshah.net>" # gpg: aka "Amit Shah <amit@kernel.org>" # gpg: aka "Amit Shah <amitshah@gmx.net>" # Primary key fingerprint: 48CA 3722 5FE7 F4A8 B337 2735 1E9A 3B5F 8540 83B6 # Subkey fingerprint: CC63 D332 AB8F 4617 4529 6534 EB0B 4DFC 657E F670 * remotes/amit-migration/tags/migration-for-2.8: MAINTAINERS: Add maintainer for COLO framework related files configure: Support enable/disable COLO feature docs: Add documentation for COLO feature COLO: Implement failover work for secondary VM COLO: Implement the process of failover for primary VM COLO: Introduce state to record failover process COLO: Add 'x-colo-lost-heartbeat' command to trigger failover COLO: Synchronize PVM's state to SVM periodically COLO: Add checkpoint-delay parameter for migrate-set-parameters COLO: Load VMState into QIOChannelBuffer before restore it COLO: Send PVM state to secondary side when do checkpoint COLO: Add a new RunState RUN_STATE_COLO COLO: Introduce checkpointing protocol COLO: Establish a new communicating path for COLO migration: Switch to COLO process after finishing loadvm migration: Enter into COLO mode after migration if COLO is enabled COLO: migrate COLO related info to secondary node migration: Introduce capability 'x-colo' to migration Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-10-31Merge remote-tracking branch 'remotes/sstabellini/tags/xen-20161028-tag' ↵Peter Maydell
into staging Xen 2016/10/28 # gpg: Signature made Sat 29 Oct 2016 02:03:42 BST # gpg: using RSA key 0x894F8F4870E1AE90 # gpg: Good signature from "Stefano Stabellini <sstabellini@kernel.org>" # gpg: aka "Stefano Stabellini <stefano.stabellini@eu.citrix.com>" # Primary key fingerprint: D04E 33AB A51F 67BA 07D3 0AEA 894F 8F48 70E1 AE90 * remotes/sstabellini/tags/xen-20161028-tag: xen: Rename xen_be_del_xendev xen: Rename xen_be_find_xendev xen: Rename xen_be_evtchn_event xen: Rename xen_be_send_notify xen: Rename xen_be_unbind_evtchn xen: Rename xen_be_printf to xen_pv_printf xen: Move xenstore cleanup and mkdir functions xen: Prepare xendev qtail to be shared with frontends xen: Move evtchn functions to xen_pvdev.c xen: Move xenstore_update to xen_pvdev.c xen: Create a new file xen_pvdev.c xen: Fix coding style warnings xen: Fix coding style errors Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-10-31Merge remote-tracking branch 'remotes/mjt/tags/trivial-patches-fetch' into ↵Peter Maydell
staging trivial patches for 2016-10-28 # gpg: Signature made Fri 28 Oct 2016 16:17:51 BST # gpg: using RSA key 0x701B4F6B1A693E59 # gpg: Good signature from "Michael Tokarev <mjt@tls.msk.ru>" # gpg: aka "Michael Tokarev <mjt@corpit.ru>" # gpg: aka "Michael Tokarev <mjt@debian.org>" # Primary key fingerprint: 6EE1 95D1 886E 8FFB 810D 4324 457C E0A0 8044 65C5 # Subkey fingerprint: 7B73 BAD6 8BE7 A2C2 8931 4B22 701B 4F6B 1A69 3E59 * remotes/mjt/tags/trivial-patches-fetch: (23 commits) Fix build for less common build directories names clean-up: removed duplicate #includes scripts/clean-includes: added duplicate #include check monitor: deprecate 'default' option qemu-ga: Remove stray 'q' in documentation Makefile: Fix help text for target 'installer' s390: avoid always-true comparison in s390_pci_generate_fid() migration: Remove unneeded NULL check from migrate_fd_error() scripts/hxtool: fix undefined behavour of echo qemu-options.hx: set: fix copy-paste error usb: Change *_exitfn return type from int to void MAINTAINERS: qemu-trivial information colo-compare: remove unused struct CompareChardevProps and 'props' variable milkymist-pfpu: fix potential integer overflow hw/block/nvme: Simplify if-statements a little bit target-lm32: rewrite gen_compare() lm32: milkymist-tmu2: fix integer overflow target-lm32: disable asm logging via LOG_DIS() target-lm32: swap operand of wcsr in LOG_DIS() target-lm32: fix LOG_DIS operand order ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-10-31Merge remote-tracking branch ↵Peter Maydell
'remotes/pmaydell/tags/pull-target-arm-20161028' into staging target-arm queue: * Fix reset GPIO handling for spitz, tosa boards * virt: add 'pmu' property for configuring whether to expose the vPMU to the guest * char: cadence: correct reset value for baud rate registers * versatilepb: do not run if user asks for more than 256MB RAM * pxa2xx: Set value default values for CCCR and CKEN on PXA255 * arm: cubieboard: Add support for initrd * i.MX: Fix GPIO ISR register write # gpg: Signature made Fri 28 Oct 2016 15:56:56 BST # gpg: using RSA key 0x3C2525ED14360CDE # gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" # gpg: aka "Peter Maydell <pmaydell@gmail.com>" # gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" # Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE * remotes/pmaydell/tags/pull-target-arm-20161028: hw/arm/tosa: Fix reset handling hw/arm/spitz: Fix reset handling arm: virt: add PMU property to mach-virt machine type arm: Add an option to turn on/off vPMU support char: cadence: correct reset value for baud rate registers versatilepb: do not run if user asks for more than 256MB RAM hw/arm/pxa2xx: Set value default values for CCCR and CKEN on PXA255 arm: cubieboard: Add support for initrd i.MX: Fix GPIO ISR register write Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-10-31Merge remote-tracking branch 'remotes/famz/tags/for-upstream' into stagingPeter Maydell
# gpg: Signature made Fri 28 Oct 2016 15:47:39 BST # gpg: using RSA key 0xCA35624C6A9171C6 # gpg: Good signature from "Fam Zheng <famz@redhat.com>" # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 5003 7CB7 9706 0F76 F021 AD56 CA35 624C 6A91 71C6 * remotes/famz/tags/for-upstream: aio: convert from RFifoLock to QemuRecMutex qemu-thread: introduce QemuRecMutex iothread: release AioContext around aio_poll block: only call aio_poll on the current thread's AioContext qemu-img: call aio_context_acquire/release around block job qemu-io: acquire AioContext block: prepare bdrv_reopen_multiple to release AioContext replication: pass BlockDriverState to reopen_backing_file iothread: detach all block devices before stopping them aio: introduce qemu_get_current_aio_context sheepdog: use BDRV_POLL_WHILE nfs: use BDRV_POLL_WHILE nfs: move nfs_set_events out of the while loops block: introduce BDRV_POLL_WHILE qed: Implement .bdrv_drain block: change drain to look only at one child at a time block: add BDS field to count in-flight requests mirror: use bdrv_drained_begin/bdrv_drained_end blockjob: introduce .drain callback for jobs replication: interrupt failover if the main device is closed Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-10-31s390x/pci: Check memory region dispatching callbacksPierre Morel
The instructions PCI STORE, PCI LOAD and PCI STORE BLOCK use calls to memory_region_dispatch_write() and memory_region_dispatch_read() but do not test the return value. Furthermore, the instruction PCI STORE BLOCK sets up a PGM_ADDRESSING exception when the operand 3 is not within the designated PCI address space instead of a PGM_OPERAND exception. Let's setup a PGM_OPERAND exception in all of these failure cases. Signed-off-by: Pierre Morel <pmorel@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2016-10-31s390x/pci: use generic interface to inject interruptYi Min Zhao
Let's use the generic interface to inject adapter interrupts. Signed-off-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2016-10-30MAINTAINERS: Add maintainer for COLO framework related fileszhanghailiang
Add myself as co-maintainer of COLO framework, so that I can get CC'ed on future patches and bugs for this feature. Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com> Reviewed-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Amit Shah <amit@amitshah.net>
2016-10-30configure: Support enable/disable COLO featurezhanghailiang
configure --enable-colo/--disable-colo to switch COLO support on/off. COLO feature doesn't depend on any other external libraries, So here it is reasonable to enable COLO by default, to avoid re-compile QEMU if users want to use this capability. Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com> Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com> Signed-off-by: Gonglei <arei.gonglei@huawei.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Amit Shah <amit@amitshah.net>
2016-10-30docs: Add documentation for COLO featurezhanghailiang
Introduce the design of COLO, and how to test it. Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com> Reviewed-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Amit Shah <amit@amitshah.net>
2016-10-30COLO: Implement failover work for secondary VMzhanghailiang
If users require SVM to takeover work, COLO incoming thread should exit from loop while failover BH helps backing to migration incoming coroutine. Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com> Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Amit Shah <amit@amitshah.net>
2016-10-30COLO: Implement the process of failover for primary VMzhanghailiang
For primary side, if COLO gets failover request from users. To be exact, gets 'x_colo_lost_heartbeat' command. COLO thread will exit the loop while the failover BH does the cleanup work and resumes VM. Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com> Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Amit Shah <amit@amitshah.net>
2016-10-30COLO: Introduce state to record failover processzhanghailiang
When handling failover, COLO processes differently according to the different stage of failover process, here we introduce a global atomic variable to record the status of failover. We add four failover status to indicate the different stage of failover process. You should use the helpers to get and set the value. Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Amit Shah <amit@amitshah.net>
2016-10-30COLO: Add 'x-colo-lost-heartbeat' command to trigger failoverzhanghailiang
We leave users to choose whatever heartbeat solution they want, if the heartbeat is lost, or other errors they detect, they can use experimental command 'x_colo_lost_heartbeat' to tell COLO to do failover, COLO will do operations accordingly. For example, if the command is sent to the Primary side, the Primary side will exit COLO mode, does cleanup work, and then, PVM will take over the service work. If sent to the Secondary side, the Secondary side will run failover work, then takes over PVM's service work. Cc: Luiz Capitulino <lcapitulino@redhat.com> Cc: Eric Blake <eblake@redhat.com> Cc: Markus Armbruster <armbru@redhat.com> Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com> Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Amit Shah <amit@amitshah.net>
2016-10-30COLO: Synchronize PVM's state to SVM periodicallyzhanghailiang
Do checkpoint periodically, the default interval is 200ms. Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com> Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Amit Shah <amit@amitshah.net>
2016-10-30COLO: Add checkpoint-delay parameter for migrate-set-parameterszhanghailiang
Add checkpoint-delay parameter for migrate-set-parameters, so that we can control the checkpoint frequency when COLO is in periodic mode. Cc: Luiz Capitulino <lcapitulino@redhat.com> Cc: Eric Blake <eblake@redhat.com> Cc: Markus Armbruster <armbru@redhat.com> Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com> Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Amit Shah <amit@amitshah.net>
2016-10-30COLO: Load VMState into QIOChannelBuffer before restore itzhanghailiang
We should not destroy the state of SVM (Secondary VM) until we receive the complete data of PVM's state, in case the primary fails in the process of sending the state, so we cache the VM's state in secondary side before load it into SVM. Besides, we should call qemu_system_reset() before load VM state, which can ensure the data is intact. Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com> Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com> Signed-off-by: Gonglei <arei.gonglei@huawei.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Cc: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Amit Shah <amit@amitshah.net>
2016-10-30COLO: Send PVM state to secondary side when do checkpointzhanghailiang
VM checkpointing is to synchronize the state of PVM to SVM, just like migration does, we re-use save helpers to achieve migrating PVM's state to Secondary side. COLO need to cache the data of VM's state in the secondary side before synchronize it to SVM. COLO need the size of the data to determine how much data should be read in the secondary side. So here, we can get the size of the data by saving it into I/O channel before send it to the secondary side. Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com> Signed-off-by: Gonglei <arei.gonglei@huawei.com> Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Cc: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Amit Shah <amit@amitshah.net>
2016-10-30COLO: Add a new RunState RUN_STATE_COLOzhanghailiang
Guest will enter this state when paused to save/restore VM state under COLO checkpoint. Cc: Eric Blake <eblake@redhat.com> Cc: Markus Armbruster <armbru@redhat.com> Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com> Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com> Signed-off-by: Gonglei <arei.gonglei@huawei.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Amit Shah <amit@amitshah.net>
2016-10-30COLO: Introduce checkpointing protocolzhanghailiang
We need communications protocol of user-defined to control the checkpointing process. The new checkpointing request is started by Primary VM, and the interactive process like below: Checkpoint synchronizing points: Primary Secondary initial work 'checkpoint-ready' <-------------------- @ 'checkpoint-request' @ --------------------> Suspend (Only in hybrid mode) 'checkpoint-reply' <-------------------- @ Suspend&Save state 'vmstate-send' @ --------------------> Send state Receive state 'vmstate-received' <-------------------- @ Release packets Load state 'vmstate-load' <-------------------- @ Resume Resume (Only in hybrid mode) Start Comparing (Only in hybrid mode) NOTE: 1) '@' who sends the message 2) Every sync-point is synchronized by two sides with only one handshake(single direction) for low-latency. If more strict synchronization is required, a opposite direction sync-point should be added. 3) Since sync-points are single direction, the remote side may go forward a lot when this side just receives the sync-point. 4) For now, we only support 'periodic' checkpoint, for which the Secondary VM is not running, later we will support 'hybrid' mode. Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com> Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com> Signed-off-by: Gonglei <arei.gonglei@huawei.com> Cc: Eric Blake <eblake@redhat.com> Cc: Markus Armbruster <armbru@redhat.com> Cc: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Amit Shah <amit@amitshah.net>
2016-10-30COLO: Establish a new communicating path for COLOzhanghailiang
This new communication path will be used for returning messages from Secondary side to Primary side. Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com> Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Amit Shah <amit@amitshah.net>
2016-10-30migration: Switch to COLO process after finishing loadvmzhanghailiang
Switch from normal migration loadvm process into COLO checkpoint process if COLO mode is enabled. We add three new members to struct MigrationIncomingState, 'have_colo_incoming_thread' and 'colo_incoming_thread' record the COLO related thread for secondary VM, 'migration_incoming_co' records the original migration incoming coroutine. Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com> Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Amit Shah <amit@amitshah.net>
2016-10-30migration: Enter into COLO mode after migration if COLO is enabledzhanghailiang
Add a new migration state: MIGRATION_STATUS_COLO. Migration source side enters this state after the first live migration successfully finished if COLO is enabled by command 'migrate_set_capability x-colo on'. We reuse migration thread, so the process of checkpointing will be handled in migration thread. Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com> Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com> Signed-off-by: Gonglei <arei.gonglei@huawei.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Amit Shah <amit@amitshah.net>
2016-10-30COLO: migrate COLO related info to secondary nodezhanghailiang
We can determine whether or not VM in destination should go into COLO mode by referring to the info that was migrated. We skip this section if COLO is not enabled (i.e. migrate_set_capability colo off), so that, It doesn't break compatibility with migration no matter whether users configure the --enable-colo/disable-colo on the source/destination side or not; Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com> Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com> Signed-off-by: Gonglei <arei.gonglei@huawei.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Amit Shah <amit@amitshah.net>
2016-10-30migration: Introduce capability 'x-colo' to migrationzhanghailiang
We add helper function colo_supported() to indicate whether colo is supported or not, with which we use to control whether or not showing 'x-colo' string to users, they can use qmp command 'query-migrate-capabilities' or hmp command 'info migrate_capabilities' to learn if colo is supported. The default value for COLO (COarse-Grain LOck Stepping) is disabled. Cc: Juan Quintela <quintela@redhat.com> Cc: Amit Shah <amit.shah@redhat.com> Cc: Eric Blake <eblake@redhat.com> Cc: Markus Armbruster <armbru@redhat.com> Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com> Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com> Signed-off-by: Gonglei <arei.gonglei@huawei.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Amit Shah <amit@amitshah.net>
2016-10-28xen: Rename xen_be_del_xendevEmil Condrea
Prepare xen_be_del_xendev to be shared with frontends: * xen_be_del_xendev -> xen_pv_del_xendev Signed-off-by: Emil Condrea <emilcondrea@gmail.com> Signed-off-by: Stefano Stabellini <sstabellini@kernel.org> Signed-off-by: Quan Xu <xuquan8@huawei.com> Acked-by: Anthony PERARD <anthony.perard@citrix.com>
2016-10-28xen: Rename xen_be_find_xendevEmil Condrea
Prepare xen_be_find_xendev to be shared with frontends: * xen_be_find_xendev -> xen_pv_find_xendev Signed-off-by: Emil Condrea <emilcondrea@gmail.com> Signed-off-by: Stefano Stabellini <sstabellini@kernel.org> Signed-off-by: Quan Xu <xuquan8@huawei.com> Acked-by: Anthony PERARD <anthony.perard@citrix.com>
2016-10-28xen: Rename xen_be_evtchn_eventEmil Condrea
Prepare xen_be_evtchn_event to be shared with frontends: * xen_be_evtchn_event -> xen_pv_evtchn_event Signed-off-by: Emil Condrea <emilcondrea@gmail.com> Signed-off-by: Stefano Stabellini <sstabellini@kernel.org> Signed-off-by: Quan Xu <xuquan8@huawei.com> Acked-by: Anthony PERARD <anthony.perard@citrix.com>
2016-10-28xen: Rename xen_be_send_notifyEmil Condrea
Prepare xen_be_send_notify to be shared with frontends: * xen_be_send_notify -> xen_pv_send_notify Signed-off-by: Emil Condrea <emilcondrea@gmail.com> Signed-off-by: Stefano Stabellini <sstabellini@kernel.org> Signed-off-by: Quan Xu <xuquan8@huawei.com> Acked-by: Anthony PERARD <anthony.perard@citrix.com>
2016-10-28xen: Rename xen_be_unbind_evtchnEmil Condrea
Prepare xen_be_unbind_evtchn to be shared with frontends: * xen_be_unbind_evtchn -> xen_pv_unbind_evtchn Signed-off-by: Emil Condrea <emilcondrea@gmail.com> Signed-off-by: Stefano Stabellini <sstabellini@kernel.org> Signed-off-by: Quan Xu <xuquan8@huawei.com> Acked-by: Anthony PERARD <anthony.perard@citrix.com>
2016-10-28xen: Rename xen_be_printf to xen_pv_printfEmil Condrea
Prepare xen_be_printf to be used by both backend and frontends: * xen_be_printf -> xen_pv_printf Signed-off-by: Emil Condrea <emilcondrea@gmail.com> Signed-off-by: Stefano Stabellini <sstabellini@kernel.org> Signed-off-by: Quan Xu <xuquan8@huawei.com> Acked-by: Anthony PERARD <anthony.perard@citrix.com>
2016-10-28xen: Move xenstore cleanup and mkdir functionsEmil Condrea
The name of the functions moved to xen_pvdev.c: * xenstore_cleanup_dir * xen_config_cleanup * xenstore_mkdir Signed-off-by: Emil Condrea <emilcondrea@gmail.com> Signed-off-by: Stefano Stabellini <sstabellini@kernel.org> Signed-off-by: Quan Xu <xuquan8@huawei.com> Acked-by: Anthony PERARD <anthony.perard@citrix.com>
2016-10-28xen: Prepare xendev qtail to be shared with frontendsEmil Condrea
* move xendevs qtail to xen_pvdev.c * change xen_be_get_xendev to use a new function: xen_pv_insert_xendev Signed-off-by: Emil Condrea <emilcondrea@gmail.com> Signed-off-by: Stefano Stabellini <sstabellini@kernel.org> Signed-off-by: Quan Xu <xuquan8@huawei.com> Acked-by: Anthony PERARD <anthony.perard@citrix.com>
2016-10-28xen: Move evtchn functions to xen_pvdev.cEmil Condrea
The name of the functions moved: * xen_be_evtchn_event * xen_be_unbind_evtchn * xen_be_send_notify Signed-off-by: Emil Condrea <emilcondrea@gmail.com> Signed-off-by: Stefano Stabellini <sstabellini@kernel.org> Signed-off-by: Quan Xu <xuquan8@huawei.com> Acked-by: Anthony PERARD <anthony.perard@citrix.com>
2016-10-28xen: Move xenstore_update to xen_pvdev.cEmil Condrea
* xenstore_update -> xen_pvdev.c Signed-off-by: Emil Condrea <emilcondrea@gmail.com> Signed-off-by: Stefano Stabellini <sstabellini@kernel.org> Signed-off-by: Quan Xu <xuquan8@huawei.com> Acked-by: Anthony PERARD <anthony.perard@citrix.com>
2016-10-28xen: Create a new file xen_pvdev.cEmil Condrea
The purpose of the new file is to store generic functions shared by frontend and backends such as xenstore operations, xendevs. Signed-off-by: Quan Xu <quan.xu@intel.com> Signed-off-by: Emil Condrea <emilcondrea@gmail.com> Signed-off-by: Stefano Stabellini <sstabellini@kernel.org> Signed-off-by: Quan Xu <xuquan8@huawei.com> Acked-by: Anthony PERARD <anthony.perard@citrix.com>
2016-10-28xen: Fix coding style warningsEmil Condrea
Fixes: * WARNING: line over 80 characters Signed-off-by: Emil Condrea <emilcondrea@gmail.com> Signed-off-by: Stefano Stabellini <sstabellini@kernel.org> Signed-off-by: Quan Xu <xuquan8@huawei.com> Acked-by: Anthony PERARD <anthony.perard@citrix.com>
2016-10-28xen: Fix coding style errorsEmil Condrea
Fixes the following errors: * ERROR: line over 90 characters * ERROR: code indent should never use tabs * ERROR: space prohibited after that open square bracket '[' * ERROR: do not initialise statics to 0 or NULL * ERROR: "(foo*)" should be "(foo *)" Signed-off-by: Emil Condrea <emilcondrea@gmail.com> Signed-off-by: Stefano Stabellini <sstabellini@kernel.org> Signed-off-by: Quan Xu <xuquan8@huawei.com> Acked-by: Anthony PERARD <anthony.perard@citrix.com>
2016-10-28net: split colo_compare_pkt_info into two trace eventsAlex Bennée
It seems there is a limit to the number of arguments a UST trace event can take and at 11 the previous trace command broke the build. Split the trace into a src pkt and dst pkt trace to fix this. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20161028132559.8324-1-alex.bennee@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-10-28Merge remote-tracking branch 'remotes/kraxel/tags/pull-ui-20161028-1' into ↵Peter Maydell
staging braille fixes and improvements. curses fix, switch to cursesw. gtk bugfixes. # gpg: Signature made Fri 28 Oct 2016 13:05:12 BST # gpg: using RSA key 0x4CB6D8EED3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" # Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138 * remotes/kraxel/tags/pull-ui-20161028-1: curses: Use cursesw instead of curses curses: fix left/right arrow translation ui/gtk: Fix non-working DELETE key gtk: fix compilation warning with gtk 3.22.2 Defer BrlAPI tty acquisition to when guest starts using device Add dots keypresses support to the baum braille device Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-10-28Merge remote-tracking branch 'remotes/vivier/tags/m68k-part2-pull-request' ↵Peter Maydell
into staging # gpg: Signature made Fri 28 Oct 2016 09:44:23 BST # gpg: using RSA key 0xF30C38BD3F2FBE3C # gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" # gpg: aka "Laurent Vivier <laurent@vivier.eu>" # gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" # Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C * remotes/vivier/tags/m68k-part2-pull-request: MAINTAINERS: update M68K entry target-m68k: immediate ops manage word and byte operands target-m68k: cmp manages word and bytes operands target-m68k: add/sub manage word and byte operands target-m68k: add addressing modes to neg target-m68k: introduce byte and word cc_ops target-m68k: some bit ops cleanup target-m68k: suba/adda can manage word operand target-m68k: and can manage word and byte operands target-m68k: or can manage word and byte operands target-m68k: eor can manage word and byte operands target-m68k: add addressing modes to not target-m68k: Inline addx, subx, negx target-m68k: add dbcc target-m68k: add addressing modes to scc target-m68k: add exg ops target-m68k: add linkl target-m68k: add bkpt instruction Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-10-28Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.8-20161028' ↵Peter Maydell
into staging ppc patch queue 2016-10-28 This pull request supersedes and extends the one from 2016-10-26 (which had a build bug). Highlights: * SLOF (pseries guest firmware) update * Enable a number of extra testcases on ppc / pseries * Added the 'powernv' machine type - Almost enough to be minimally usable - But still missing necessary interrupt controller updates * Cleanup and consolidation of NVRAM handling on several platforms with related firmware * Substantial cleanup to device tree construction * Some more POWER9 instruction emulation * Cleanup to handling of pseries option vectors and CAS reboot handling (host/guest feature negotiation mechanism) * Significant cleanups to handling of PCI devices in test cases * New hotplug event infrastructure * Memory hot unplug support for pseries * Several bug fixes The NVRAM cleanup affects some Sun sparc platforms as well as ppc ones, but have been tested by the sparc maintainer (Mark Cave-Ayland). The test additions also include substantial general changes to the test framework that aren't strictly ppc related. They don't seem to break tests on other platforms, they're for the benefit of enabling tests on ppc and there isn't a specific maintainer for them, so they're included in this tree. # gpg: Signature made Fri 28 Oct 2016 02:37:19 BST # gpg: using RSA key 0x6C38CACA20D9B392 # gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" # gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" # gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" # gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" # Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392 * remotes/dgibson/tags/ppc-for-2.8-20161028: (73 commits) ppc: allow certain HV interrupts to be delivered to guests spapr: Memory hot-unplug support spapr: use count+index for memory hotplug spapr: Add DRC count indexed hotplug identifier type spapr: add hotplug interrupt machine options spapr_events: add support for dedicated hotplug event source spapr: update spapr hotplug documentation target-ppc: Add xvcmpnesp, xvcmpnedp instructions target-ppc: add xscmp[eq,gt,ge,ne]dp instructions tests: Add pseries machine to the prom-env-test, too spapr_nvram: Pre-initialize the NVRAM to support the -prom-env parameter libqos: Change PCI accessors to take opaque BAR handle tests: Don't assume structure of PCI IO base in ahci-test tests: Use qpci_mem{read,write} in ivshmem-test libqos: Add 64-bit PCI IO accessors tests: Clean up IO handling in ide-test libqos: Implement mmio accessors in terms of mem{read,write} libqos: Add streaming accessors for PCI MMIO tests: Adjust tco-test to use qpci_legacy_iomap() libqos: Better handling of PCI legacy IO ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-10-28Fix build for less common build directories namesStefan Weil
scripts/tracetool generates a C preprocessor macro from the name of the build directory. Any characters which are possible in a directory name but not allowed in a macro name must be substituted, otherwise builds will fail. Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2016-10-28clean-up: removed duplicate #includesAnand J
Some files contain multiple #includes of the same header file. Removed most of those unnecessary duplicate entries using scripts/clean-includes. Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Anand J <anand.indukala@gmail.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2016-10-28scripts/clean-includes: added duplicate #include checkAnand J
Enhance the clean-includes script to optionally check for duplicate #include entries. Script might output false positive entries as well. Such entries should not be removed. So if it finds any duplicate entries script will terminate with an exit status 1. Then each and every file should be checked manually and corrected if necessary. In order to enable the check use --check-dup-head option with scripts/clean-includes. Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Anand J <anand.indukala@gmail.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2016-10-28monitor: deprecate 'default' optionMarc-André Lureau
This option does nothing since commit 06ac27f. Deprecate it. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>