| Age | Commit message (Collapse) | Author |
|---|
|
The remaining text in docs/barrier.txt is user-facing description
of what the device is and how to use it. Move this into the
system manual and rstify it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20210727204112.12579-4-peter.maydell@linaro.org
|
|
docs/barrier.txt has a couple of TODO notes about things to be
implemented in this device; move them into a comment in the
source code.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20210727204112.12579-3-peter.maydell@linaro.org
|
|
Most of docs/barrier.txt is describing the protocol implemented
by the input-barrier device. Move this into the interop
section of the manual, and rstify it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-id: 20210727204112.12579-2-peter.maydell@linaro.org
|
|
Move bootindex.txt into the system section of the manual and turn it
into rST format. To make the document make more sense in the context
of the system manual, expand the title and introductory paragraphs to
give more context.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 20210727194955.7764-1-peter.maydell@linaro.org
|
|
If the user provides both a BIOS/firmware image and also a guest
kernel filename, arm_setup_firmware_boot() will pass the
kernel image to the firmware via the fw_cfg device. However we
weren't checking whether there really was a fw_cfg device present,
and if there wasn't we would crash.
This crash can be provoked with a command line such as
qemu-system-aarch64 -M raspi3 -kernel /dev/null -bios /dev/null -display none
It is currently only possible on the raspi3 machine, because unless
the machine sets info->firmware_loaded we won't call
arm_setup_firmware_boot(), and the only machines which set that are:
* virt (has a fw-cfg device)
* sbsa-ref (checks itself for kernel_filename && firmware_loaded)
* raspi3 (crashes)
But this is an unfortunate beartrap to leave for future machine
model implementors, so we should handle this situation in boot.c.
Check in arm_setup_firmware_boot() whether the fw-cfg device exists
before trying to load files into it, and if it doesn't exist then
exit with a hopefully helpful error message.
Because we now handle this check in a machine-agnostic way, we
can remove the check from sbsa-ref.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/503
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210726163351.32086-1-peter.maydell@linaro.org
|
|
The documentation of the posix_acl option has a stray backtick
at the end of the text (which is rendered literally into the HTML).
Delete it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-id: 20210726142338.31872-11-peter.maydell@linaro.org
|
|
The section describing the removed feature "-usbdevice ccid" had a
typo so the markup started with single backtick and ended with double
backtick; fix it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20210726142338.31872-10-peter.maydell@linaro.org
|
|
In rST markup, single backticks `like this` represent "interpreted
text", which can be handled as a bunch of different things if tagged
with a specific "role":
https://docutils.sourceforge.io/docs/ref/rst/restructuredtext.html#interpreted-text
(the most common one for us is "reference to a URL, which gets
hyperlinked").
The default "role" if none is specified is "title_reference",
intended for references to book or article titles, and it renders
into the HTML as <cite>...</cite> (usually comes out as italics).
This commit fixes various places in the manual which were
using single backticks when double backticks (for literal text)
were intended, and covers those files where only one or two
instances of these errors were made.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
|
|
In rST markup, single backticks `like this` represent "interpreted
text", which can be handled as a bunch of different things if tagged
with a specific "role":
https://docutils.sourceforge.io/docs/ref/rst/restructuredtext.html#interpreted-text
(the most common one for us is "reference to a URL, which gets
hyperlinked").
The default "role" if none is specified is "title_reference",
intended for references to book or article titles, and it renders
into the HTML as <cite>...</cite> (usually comes out as italics).
To format a literal (generally rendered as fixed-width font),
double-backticks are required.
cpu-features.rst consistently uses single backticks when double backticks
are required; correct it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20210726142338.31872-8-peter.maydell@linaro.org
|
|
In rST markup, single backticks `like this` represent "interpreted
text", which can be handled as a bunch of different things if tagged
with a specific "role":
https://docutils.sourceforge.io/docs/ref/rst/restructuredtext.html#interpreted-text
(the most common one for us is "reference to a URL, which gets
hyperlinked").
The default "role" if none is specified is "title_reference",
intended for references to book or article titles, and it renders
into the HTML as <cite>...</cite> (usually comes out as italics).
To format a literal (generally rendered as fixed-width font),
double-backticks are required.
protvirt.rst consistently uses single backticks when double backticks
are required; correct it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Message-id: 20210726142338.31872-7-peter.maydell@linaro.org
|
|
In rST markup, single backticks `like this` represent "interpreted
text", which can be handled as a bunch of different things if tagged
with a specific "role":
https://docutils.sourceforge.io/docs/ref/rst/restructuredtext.html#interpreted-text
(the most common one for us is "reference to a URL, which gets
hyperlinked").
The default "role" if none is specified is "title_reference",
intended for references to book or article titles, and it renders
into the HTML as <cite>...</cite> (usually comes out as italics).
Fix various places in the devel section of the manual which were
using single backticks when double backticks (for literal text)
were intended.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20210726142338.31872-6-peter.maydell@linaro.org
|
|
In rST markup, single backticks `like this` represent "interpreted
text", which can be handled as a bunch of different things if tagged
with a specific "role":
https://docutils.sourceforge.io/docs/ref/rst/restructuredtext.html#interpreted-text
(the most common one for us is "reference to a URL, which gets
hyperlinked").
The default "role" if none is specified is "title_reference",
intended for references to book or article titles, and it renders
into the HTML as <cite>...</cite> (usually comes out as italics).
To format a literal (generally rendered as fixed-width font),
double-backticks are required.
Mostly migration.rst gets this right, but some places incorrectly use
single backticks where double backticks were intended; correct them.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-id: 20210726142338.31872-5-peter.maydell@linaro.org
|
|
In rST markup, single backticks `like this` represent "interpreted
text", which can be handled as a bunch of different things if tagged
with a specific "role":
https://docutils.sourceforge.io/docs/ref/rst/restructuredtext.html#interpreted-text
(the most common one for us is "reference to a URL, which gets
hyperlinked").
The default "role" if none is specified is "title_reference",
intended for references to book or article titles, and it renders
into the HTML as <cite>...</cite> (usually comes out as italics).
To format a literal (generally rendered as fixed-width font),
double-backticks are required.
ebpf_rss.rst gets this wrong in a few places; correct them.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20210726142338.31872-4-peter.maydell@linaro.org
|
|
One of the example meson.build fragments incorrectly quotes some
symbols as 'CONFIG_FOO`; the correct syntax here is 'CONFIG_FOO'.
(This isn't a rST formatting mistake because the example is displayed
literally; it's just the wrong kind of quote.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20210726142338.31872-3-peter.maydell@linaro.org
|
|
In rST markup, single backticks `like this` represent "interpreted
text", which can be handled as a bunch of different things if tagged
with a specific "role":
https://docutils.sourceforge.io/docs/ref/rst/restructuredtext.html#interpreted-text
(the most common one for us is "reference to a URL, which gets
hyperlinked").
The default "role" if none is specified is "title_reference",
intended for references to book or article titles, and it renders
into the HTML as <cite>...</cite> (usually comes out as italics).
build-system.rst seems to have been written under the mistaken
assumption that single-backticks mark up literal text (function
names, etc) which should be rendered in a fixed-width font.
The rST markup for this is ``double backticks``.
Update all the markup.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210726142338.31872-2-peter.maydell@linaro.org
|
|
Our built HTML documentation now has a standard footer which
gives the license for QEMU (and its documentation as a whole).
In almost all pages, we either don't bother to state the
copyright/license for the individual rST sources, or we put
it in an rST comment. There are just three pages which render
copyright or license information into the user-visible HTML.
Quoting a specific (different) license for an individual HTML
page within the manual is confusing. Downgrade the license
and copyright info to a comment within the rST source, bringing
these pages in line with the rest of our documents.
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20210722192016.24915-3-peter.maydell@linaro.org
|
|
Since commits 13f934e79fa and 3a50c8f3067aaf, our HTML docs include a
footer to all pages stating the license and version. We can
therefore delete the TODO comments suggesting we should do that from
our .rst files.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 20210722192016.24915-2-peter.maydell@linaro.org
|
|
Andrzej Zaborowski is listed as an "Odd Fixes" maintainer for the
nSeries, Palm and PXA2XX boards, as well as the "Maintained" status
Arm 32-bit TCG backend.
Andrzej's last email to qemu-devel was back in 2017, and the email
before that was all the way back in 2013. We don't really need to
fill his email up with CCs on QEMU patches any more...
Remove Andrzej from the various boards sections (leaving them still
Odd Fixes with me as the backup patch reviewer). Add Richard
Henderson as the maintainer for the Arm TCG backend, since removing
Andrzej would otherwise leave that section with no M: line at all.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210722180951.29802-1-peter.maydell@linaro.org
|
|
Add brief documentation of the Arm 'imx25-pdk' board.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210722175229.29065-4-peter.maydell@linaro.org
|
|
Add brief documentation of the Arm 'kzm' board.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210722175229.29065-3-peter.maydell@linaro.org
|
|
Add brief documentation of the Arm 'mainstone' board.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210722175229.29065-2-peter.maydell@linaro.org
|
|
staging
# gpg: Signature made Mon 02 Aug 2021 05:23:19 BST
# gpg: using RSA key EF04965B398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211
* remotes/jasowang/tags/net-pull-request:
hw/net: e1000e: Don't zero out the VLAN tag in the legacy RX descriptor
hw/net: e1000e: Correct the initial value of VET register
hw/net: e1000: Correct the initial value of VET register
hw/net/can: sja1000 fix buff2frame_bas and buff2frame_pel when dlc is out of std CAN 8 bytes
hw/net/vmxnet3: Do not abort QEMU if guest specified bad queue numbers
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
In the legacy RX descriptor mode, VLAN tag was saved to d->special
by e1000e_build_rx_metadata() in e1000e_write_lgcy_rx_descr(), but
it was then zeroed out again at the end of the call, which is wrong.
Fixes: c89d416a2b0f ("e1000e: Don't zero out buffer address in rx descriptor")
Reported-by: Markus Carlstedt <markus.carlstedt@windriver.com>
Signed-off-by: Christina Wang <christina.wang@windriver.com>
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
|
|
The initial value of VLAN Ether Type (VET) register is 0x8100, as per
the manual and real hardware.
While Linux e1000e driver always writes VET register to 0x8100, it is
not always the case for everyone. Drivers relying on the reset value
of VET won't be able to transmit and receive VLAN frames in QEMU.
Unlike e1000 in QEMU, e1000e uses a field 'vet' in "struct E1000Core"
to cache the value of VET register, but the cache only gets updated
when VET register is written. To always get a consistent VET value
no matter VET is written or remains its reset value, drop the 'vet'
field and use 'core->mac[VET]' directly.
Reported-by: Markus Carlstedt <markus.carlstedt@windriver.com>
Signed-off-by: Christina Wang <christina.wang@windriver.com>
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
|
|
The initial value of VLAN Ether Type (VET) register is 0x8100, as per
the manual and real hardware.
While Linux e1000 driver always writes VET register to 0x8100, it is
not always the case for everyone. Drivers relying on the reset value
of VET won't be able to transmit and receive VLAN frames in QEMU.
Reported-by: Markus Carlstedt <markus.carlstedt@windriver.com>
Signed-off-by: Christina Wang <christina.wang@windriver.com>
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
|
|
std CAN 8 bytes
Problem reported by openEuler fuzz-sig group.
The buff2frame_bas function (hw\net\can\can_sja1000.c)
infoleak(qemu5.x~qemu6.x) or stack-overflow(qemu 4.x).
Reported-by: Qiang Ning <ningqiang1@huawei.com>
Cc: qemu-stable@nongnu.org
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>
Signed-off-by: Jason Wang <jasowang@redhat.com>
|
|
QEMU should never terminate unexpectedly just because the guest is
doing something wrong like specifying wrong queue numbers. Let's
simply refuse to set the device active in this case.
Buglink: https://bugs.launchpad.net/qemu/+bug/1890160
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
|
|
into staging
Fix double bswap in 16-byte atomic store
Mark nios2 raise_exception noreturn
# gpg: Signature made Fri 30 Jul 2021 19:24:44 BST
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F
* remotes/rth-gitlab/tags/pull-tcg-20210730:
target/nios2: Mark raise_exception() as noreturn
accel/tcg: Remove double bswap for helper_atomic_sto_*_mmu
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Raised exceptions don't return, so mark the helper with noreturn.
Fixes: 032c76bc6f9 ("nios2: Add architecture emulation support")
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210729101315.2318714-1-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
This crept in as either a cut-and-paste error, or rebase error.
Fixes: cfec388518d ("atomic_template: add inline trace/plugin helpers")
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210729004647.282017-24-richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
'remotes/stefanha-gitlab/tags/block-pull-request' into staging
Pull request
The main fix here is for io_uring. Spurious -EAGAIN errors can happen and the
request needs to be resubmitted.
The MAINTAINERS changes carry no risk and we might as well include them in QEMU
6.1.
# gpg: Signature made Thu 29 Jul 2021 17:22:20 BST
# gpg: using RSA key 8695A8BFD3F97CDAAC35775A9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" [full]
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" [full]
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8
* remotes/stefanha-gitlab/tags/block-pull-request:
MAINTAINERS: Added myself as a reviewer for the NVMe Block Driver
block/io_uring: resubmit when result is -EAGAIN
MAINTAINERS: add Stefano Garzarella as io_uring reviewer
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
into staging
usb: fixes for 6.1: usbredir, usb-host for windows, docs.
# gpg: Signature made Thu 29 Jul 2021 13:50:32 BST
# gpg: using RSA key A0328CFFB93A17A79901FE7D4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full]
# gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" [full]
# gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full]
# Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138
* remotes/kraxel/tags/usb-20210729-pull-request:
docs: Fold usb2.txt passthrough information into usb.rst
docs: Fold usb2.txt physical port addressing info into usb.rst
docs: Fold usb2.txt USB controller information into usb.rst
docs: Incorporate information in usb-storage.txt into rST manual
usbredir: fix free call
ci: add libusb for windows builds
usb-host: wire up timer for windows
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
I'm interested in following the activity around the NVMe bdrv.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20210728183340.2018313-1-philmd@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Linux SCSI can throw spurious -EAGAIN in some corner cases in its
completion path, which will end up being the result in the completed
io_uring request.
Resubmitting such requests should allow block jobs to complete, even
if such spurious errors are encountered.
Co-authored-by: Stefan Hajnoczi <stefanha@gmail.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Fabian Ebner <f.ebner@proxmox.com>
Message-id: 20210729091029.65369-1-f.ebner@proxmox.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
I've been working with io_uring for a while so I'd like to help
with reviews.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20210728131515.131045-1-sgarzare@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
staging
Bugfixes.
# gpg: Signature made Thu 29 Jul 2021 09:15:54 BST
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini-gitlab/tags/for-upstream:
libvhost-user: fix -Werror=format= warnings with __u64 fields
meson: fix meson 0.58 warning with libvhost-user subproject
target/i386: fix typo in ctl_has_irq
target/i386: Added consistency checks for event injection
configure: Add -Werror to avx2, avx512 tests
Makefile: ignore long options
i386: assert 'cs->kvm_state' is not null
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
'remotes/thuth-gitlab/tags/pull-request-2021-07-29' into staging
* Document GitLab custom CI/CD variables
* Fix 'when:' condition in gitlab-CI jobs
* Disable tests in the gitlab-CI that fail due to out-of-memory conditions
* Allow pushing to "staging" again for maintainers without s390x access
* Fix migration-test build failure on SPARC
* Compile without "pie" on Haiku
# gpg: Signature made Thu 29 Jul 2021 07:17:17 BST
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* remotes/thuth-gitlab/tags/pull-request-2021-07-29:
configure script fix for Haiku
tests: Fix migration-test build failure for sparc
gitlab-ci.d/custom-runners: Improve rules for the staging branch
gitlab-ci.d/buildtest: Mark the aarch64 and ppc64-s390x CFI jobs as manual
gitlab-ci.d/buildtest: Disable iotests 197 and 215
gitlab-ci: Fix 'when:' condition in OpenSBI jobs
gitlab-ci: Fix 'when:' condition in EDK2 jobs
gitlab-ci: Fix 'when:' condition in acceptance_test_job_template
docs: Document GitLab custom CI/CD variables
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
into staging
ppc patch queue 2021-07-29
Here's a small batch of bufixes for the ppc target to go into qemu-6.1.
# gpg: Signature made Thu 29 Jul 2021 08:01:00 BST
# gpg: using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full]
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full]
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full]
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown]
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dg-gitlab/tags/ppc-for-6.1-20210729:
kvm: ppc: Print meaningful message on KVM_CREATE_VM failure
ppc/vof: Fix Coverity issues
target/ppc: Ease L=0 requirement on cmp/cmpi/cmpl/cmpli for ppc32
i2c/smbus_eeprom: Add feature bit to SPD data
ppc/pegasos2: Fix spurious warning with -bios
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Fold the usb2.txt information on device passthrough into usb.rst;
since this is the last part of the .txt file we can delete it now.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20210728141457.14825-5-peter.maydell@linaro.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Fold the usb2.txt documentation about specifying which physical
port a USB device should use into usb.rst.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20210728141457.14825-4-peter.maydell@linaro.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Fold the information in docs/usb2.txt about the different
kinds of supported USB controller into the main rST manual.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20210728141457.14825-3-peter.maydell@linaro.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
We already have a section on USB in the rST manual; fold
the information in docs/usb-storage.txt into it.
We add 'format=raw' to the various -drive options in the code
examples, because QEMU will print warnings these days if you
omit it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20210728141457.14825-2-peter.maydell@linaro.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
data might point into the middle of a larger buffer, there is a separate
free_on_destroy pointer passed into bufp_alloc() to handle that. It is
only used in the normal workflow though, not when dropping packets due
to the queue being full. Fix that.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/491
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20210722072756.647673-1-kraxel@redhat.com>
|
|
Add CI coverage for usb passthrough on windows.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Message-Id: <20210623085249.1151901-3-kraxel@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
On windows we can't wait on file descriptors.
Poll libusb using a timer instead.
Fixes long-standing FIXME.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/431
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20210623085249.1151901-2-kraxel@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
../subprojects/libvhost-user/libvhost-user.c:1070:12: error: format ‘%lx’ expects argument of type ‘long unsigned int’, but argument 3 has type ‘__u64’ {aka ‘long long unsigned int’} [-Werror=format=]
1070 | DPRINT(" desc_user_addr: 0x%016" PRIx64 "\n", vra->desc_user_addr);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~
| |
| __u64 {aka long long unsigned int}
Rather than using %llx, which may fail if __u64 is declared differently
elsewhere, let's just cast the values. Feel free to propose a better solution!
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20210505151313.203258-2-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Meson now checks that subprojects do not access files from parent
project. While we all agree this is best practice, libvhost-user also
want to share a few headers with QEMU, and libvhost-user isn't really a
standalone project at this point (although this is making the dependency
a bit more explicit).
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20210505151313.203258-1-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The shift constant was incorrect, causing int_prio to always be zero.
Signed-off-by: Lara Lazier <laramglazier@gmail.com>
[Rewritten commit message since v1 had already been included. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
VMRUN exits with SVM_EXIT_ERR if either:
* The event injected has a reserved type.
* When the event injected is of type 3 (exception), and the vector that
has been specified does not correspond to an exception.
This does not fix the entire exc_inj test in kvm-unit-tests.
Signed-off-by: Lara Lazier <laramglazier@gmail.com>
Message-Id: <20210725090855.19713-1-laramglazier@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
When using clang, we get
ERROR: configure test passed without -Werror but failed with -Werror.
This is probably a bug in the configure script. The failing command
will be at the bottom of config.log.
You can run configure with --disable-werror to bypass this check.
What we really want from these two tests is whether the
entire code sequence is supported, including pragmas.
Adding -Werror makes the test properly fail for clang.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210719200112.295316-1-richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
