aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-01-04fw_cfg: Fix -boot reboot-timeout error checkingLi Qiang
fw_cfg_reboot() gets option parameter "reboot-timeout" with qemu_opt_get(), then converts it to an integer by hand. It neglects to check that conversion for errors, and fails to reject negative values. Positive values above the limit get reported and replaced by the limit. This patch checks for conversion errors properly, and reject all values outside 0...0xffff. Signed-off-by: Li Qiang <liq3ea@gmail.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <1542777026-2788-3-git-send-email-liq3ea@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-01-04fw_cfg: Fix -boot bootsplash error checkingLi Qiang
fw_cfg_bootsplash() gets option parameter "splash-time" with qemu_opt_get(), then converts it to an integer by hand. It neglects to check that conversion for errors. This is needlessly complicated and error-prone. But as "splash-time not specified" is not the same as "splash-time=T" for any T, we need use qemu_opt_get() to check if splash time exists. This patch also make the qemu exit when finding or loading splash file failed. Signed-off-by: Li Qiang <liq3ea@gmail.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <1542777026-2788-2-git-send-email-liq3ea@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-01-04fw_cfg: Improve error message when can't load splash fileLi Qiang
read_splashfile() reports "failed to read splash file" without further details. Get the details from g_file_get_contents(), and include them in the error message. Also remove unnecessary 'res' variable. Signed-off-by: Li Qiang <liq3ea@gmail.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <1541052148-28752-1-git-send-email-liq3ea@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-01-04Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into ↵Peter Maydell
staging Pull request Bug fixes for the .dmg image file format. # gpg: Signature made Fri 04 Jan 2019 11:21:18 GMT # gpg: using RSA key 9CA4ABB381AB73C8 # gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" # gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" # Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8 * remotes/stefanha/tags/block-pull-request: dmg: don't skip zero chunk dmg: use enumeration type instead of hard coding number dmg: fix binary search dmg: Fixing wrong dmg block type value for block terminator. Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-01-04dmg: don't skip zero chunkyuchenlin
The dmg file has many tables which describe: "start from sector XXX to sector XXX, the compression method is XXX and where the compressed data resides on". Each sector in the expanded file should be covered by a table. The table will describe the offset of compressed data (or raw depends on the type) in the dmg. For example: [-----------The expanded file------------] [---bzip table ---]/* zeros */[---zlib---] ^ | if we want to read this sector. we will find bzip table which contains this sector, and get the compressed data offset, read it from dmg, uncompress it, finally write to expanded file. If we skip zero chunk (table), some sector cannot find the table which will cause search_chunk() return s->n_chunks, dmg_read_chunk() return -1 and finally causing dmg_co_preadv() return EIO. See: [-----------The expanded file------------] [---bzip table ---]/* zeros */[---zlib---] ^ | if we want to read this sector. Oops, we cannot find the table contains it... In the original implementation, we don't have zero table. When we try to read sector inside the zero chunk. We will get EIO, and skip reading. After this patch, we treat zero chunk the same as ignore chunk, it will directly write zero and avoid some sector may not find the table. After this patch: [-----------The expanded file------------] [---bzip table ---][--zeros--][---zlib---] Signed-off-by: yuchenlin <npes87184@gmail.com> Reviewed-by: Julio Faracco <jcfaracco@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 20190103114700.9686-4-npes87184@gmail.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2019-01-04dmg: use enumeration type instead of hard coding numberyuchenlin
Signed-off-by: yuchenlin <npes87184@gmail.com> Reviewed-by: Julio Faracco <jcfaracco@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 20190103114700.9686-3-npes87184@gmail.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2019-01-04dmg: fix binary searchyuchenlin
There is a possible hang in original binary search implementation. That is if chunk1 = 4, chunk2 = 5, chunk3 = 4, and we go else case. The chunk1 will be still 4, and so on. Signed-off-by: yuchenlin <npes87184@gmail.com> Message-id: 20190103114700.9686-2-npes87184@gmail.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2019-01-04dmg: Fixing wrong dmg block type value for block terminator.Julio Faracco
This is a trivial patch to fix a wrong value for block terminator. The old value was 0x7fffffff which is wrong. It was not affecting the code because QEMU dmg block is not handling block terminator right now. Neverthless, it should be fixed. Signed-off-by: Julio Faracco <jcfaracco@gmail.com> Reviewed-by: yuchenlin <yuchenlin@synology.com> Message-id: 20181228145055.18039-1-jcfaracco@gmail.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2019-01-04Merge remote-tracking branch ↵Peter Maydell
'remotes/amarkovic/tags/mips-queue-december-2018-v3' into staging MIPS queue for December 2018 - v3 # gpg: Signature made Thu 03 Jan 2019 16:53:47 GMT # gpg: using RSA key D4972A8967F75A65 # gpg: Good signature from "Aleksandar Markovic <amarkovic@wavecomp.com>" # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 8526 FBF1 5DA3 811F 4A01 DD75 D497 2A89 67F7 5A65 * remotes/amarkovic/tags/mips-queue-december-2018-v3: (44 commits) tests/tcg: mips: Test R5900 three-operand MADDU1 tests/tcg: mips: Test R5900 three-operand MADDU tests/tcg: mips: Test R5900 three-operand MADD1 tests/tcg: mips: Test R5900 three-operand MADD disas: nanoMIPS: Add a note on documentation disas: nanoMIPS: Reorder declarations and definitions of gpr decoders disas: nanoMIPS: Comment the decoder of 'gpr1' gpr encoding type disas: nanoMIPS: Rename the decoder of 'gpr1' gpr encoding type disas: nanoMIPS: Comment the decoder of 'gpr2.reg2' gpr encoding type disas: nanoMIPS: Rename the decoder of 'gpr2.reg2' gpr encoding type disas: nanoMIPS: Comment the decoder of 'gpr2.reg1' gpr encoding type disas: nanoMIPS: Rename the decoder of 'gpr2.reg1' gpr encoding type disas: nanoMIPS: Comment the decoder of 'gpr4.zero' gpr encoding type disas: nanoMIPS: Rename the decoder of 'gpr4.zero' gpr encoding type disas: nanoMIPS: Comment the decoder of 'gpr4' gpr encoding type disas: nanoMIPS: Rename the decoder of 'gpr4' gpr encoding type disas: nanoMIPS: Comment the decoder of 'gpr3.src.store' gpr encoding type disas: nanoMIPS: Rename the decoder of 'gpr3.src.store' gpr encoding type disas: nanoMIPS: Comment the decoder of 'gpr3' gpr encoding type disas: nanoMIPS: Rename the decoder of 'gpr3' gpr encoding type ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-01-03tests/tcg: mips: Test R5900 three-operand MADDU1Fredrik Noring
Test R5900 three-operand MADDU1. Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Fredrik Noring <noring@nocrew.org>
2019-01-03tests/tcg: mips: Test R5900 three-operand MADDUFredrik Noring
Test R5900 three-operand MADDU. Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Fredrik Noring <noring@nocrew.org>
2019-01-03tests/tcg: mips: Test R5900 three-operand MADD1Fredrik Noring
Test R5900 three-operand MADD1. Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Fredrik Noring <noring@nocrew.org>
2019-01-03tests/tcg: mips: Test R5900 three-operand MADDFredrik Noring
Test R5900 three-operand MADD. Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Fredrik Noring <noring@nocrew.org>
2019-01-03disas: nanoMIPS: Add a note on documentationAleksandar Markovic
Add "nanoMIPS32 Instruction Set Technical Reference Manual" as a reference. Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2019-01-03disas: nanoMIPS: Reorder declarations and definitions of gpr decodersAleksandar Markovic
Reorder declarations and definitions of gpr decoders by number of input bits of corresponding encoding type. Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2019-01-03disas: nanoMIPS: Comment the decoder of 'gpr1' gpr encoding typeAleksandar Markovic
Comment the decoder of 'gpr1' gpr encoding type in nanoMIPS disassembler. Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2019-01-03disas: nanoMIPS: Rename the decoder of 'gpr1' gpr encoding typeAleksandar Markovic
Rename the decoder of 'gpr1' gpr encoding type in nanoMIPS disassembler. Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2019-01-03disas: nanoMIPS: Comment the decoder of 'gpr2.reg2' gpr encoding typeAleksandar Markovic
Comment the decoder of 'gpr2.reg2' gpr encoding type in nanoMIPS disassembler. Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2019-01-03disas: nanoMIPS: Rename the decoder of 'gpr2.reg2' gpr encoding typeAleksandar Markovic
Rename the decoder of 'gpr2.reg2' gpr encoding type in nanoMIPS disassembler. Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2019-01-03disas: nanoMIPS: Comment the decoder of 'gpr2.reg1' gpr encoding typeAleksandar Markovic
Comment the decoder of 'gpr2.reg1' gpr encoding type in nanoMIPS disassembler. Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2019-01-03disas: nanoMIPS: Rename the decoder of 'gpr2.reg1' gpr encoding typeAleksandar Markovic
Rename the decoder of 'gpr2.reg1' gpr encoding type in nanoMIPS disassembler. Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2019-01-03disas: nanoMIPS: Comment the decoder of 'gpr4.zero' gpr encoding typeAleksandar Markovic
Comment the decoder of 'gpr4.zero' gpr encoding type in nanoMIPS disassembler. Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2019-01-03disas: nanoMIPS: Rename the decoder of 'gpr4.zero' gpr encoding typeAleksandar Markovic
Rename the decoder of 'gpr4.zero' gpr encoding type in nanoMIPS disassembler. Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2019-01-03disas: nanoMIPS: Comment the decoder of 'gpr4' gpr encoding typeAleksandar Markovic
Comment the decoder of 'gpr4' gpr encoding type in nanoMIPS disassembler. Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2019-01-03disas: nanoMIPS: Rename the decoder of 'gpr4' gpr encoding typeAleksandar Markovic
Rename the decoder of 'gpr4' gpr encoding type in nanoMIPS disassembler. Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2019-01-03disas: nanoMIPS: Comment the decoder of 'gpr3.src.store' gpr encoding typeAleksandar Markovic
Comment the decoder of 'gpr3.src.store' gpr encoding type in nanoMIPS disassembler. Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2019-01-03disas: nanoMIPS: Rename the decoder of 'gpr3.src.store' gpr encoding typeAleksandar Markovic
Rename the decoder of 'gpr3.src.store' gpr encoding type in nanoMIPS disassembler. Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2019-01-03disas: nanoMIPS: Comment the decoder of 'gpr3' gpr encoding typeAleksandar Markovic
Comment the decoder of 'gpr3' gpr encoding type in nanoMIPS disassembler. Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2019-01-03disas: nanoMIPS: Rename the decoder of 'gpr3' gpr encoding typeAleksandar Markovic
Rename the decoder of 'gpr3' gpr encoding type in nanoMIPS disassembler. Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2019-01-03disas: nanoMIPS: Fix order of more invocationsAleksandar Markovic
Fix order of extraction function invocations so that extraction goes from MSB side to LSB side of the given instruction coding content. This is desireable because of consistency and easier visual spotting of errors. After this patch, all such invocations should be in the desired order. Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2019-01-03disas: nanoMIPS: Name more functions in a more descriptive wayAleksandar Markovic
Rename more functions that have names that are hard to understand. Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2019-01-03disas: nanoMIPS: Fix an FP-related misnomer 3Aleksandar Markovic
Rename NMD::extract_ft_20_19_18_17_16(uint64 instruction) to NMD::extract_ft_25_24_23_22_21(uint64 instruction). Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2019-01-03disas: nanoMIPS: Fix an FP-related misnomer 2Aleksandar Markovic
Rename NMD::extract_fs_15_14_13_12_11(uint64 instruction) to NMD::extract_fs_20_19_18_17_16(uint64 instruction). Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2019-01-03disas: nanoMIPS: Fix an FP-related misnomer 1Aleksandar Markovic
Rename NMD::extract_fd_10_9_8_7_6(uint64 instruction) to NMD::extract_fd_15_14_13_12_11(uint64 instruction). Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2019-01-03disas: nanoMIPS: Name some functions in a more descriptive wayAleksandar Markovic
Rename some functions that have names that are hard to understand. Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com> Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2019-01-03disas: nanoMIPS: Fix order of some invocationsAleksandar Markovic
Fix order of extraction function invocations so that extraction goes from MSB side to LSB side of the given instruction coding content. This is desireable because of consistency and easier visual spotting of errors. Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com> Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2019-01-03disas: nanoMIPS: Fix a function misnomerAleksandar Markovic
Fix wrong function name. The convention in these files is that names of extraction functions should reflect bit patterns they are extracting. Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com> Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2019-01-03disas: nanoMIPS: Remove functions that are not usedAleksandar Markovic
Some functions were not used at all. Compiler doesn't complain since they are class memebers. Remove them - no future usage is planned. Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com> Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2019-01-03disas: nanoMIPS: Fix preamble text in nanomips.* filesAleksandar Markovic
Fix several mistakes in preambles of nanomips disassembler source files. Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com> Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2019-01-03disas: nanoMIPS: Fix types and format stringsStefan Weil
Use POSIX types and format strings. Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Stefan Weil <sw@weilnetz.de>
2019-01-03target/mips: Support R5900 three-operand MADD1 and MADDU1 instructionsFredrik Noring
The three-operand MADD and MADDU are specific to R5900 cores. Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Fredrik Noring <noring@nocrew.org>
2019-01-03target/mips: Support R5900 three-operand MADD and MADDU instructionsPhilippe Mathieu-Daudé
The three-operand MADD and MADDU are specific to Sony R5900 core, and Toshiba TX19/TX39/TX79 cores as well. The "32-Bit TX System RISC TX39 Family Architecture manual" is available at https://wiki.qemu.org/File:DSAE0022432.pdf Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Philippe Mathieu-Daudé<f4bug@amsat.org> Signed-off-by: Fredrik Noring <noring@nocrew.org> Tested-by: Fredrik Noring <noring@nocrew.org>
2019-01-03target/mips: MXU: Add handler for an align instructionAleksandar Markovic
Add translation handler for S32ALNI MXU instruction. Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2019-01-03target/mips: MXU: Add handlers for max/min instructionsAleksandar Markovic
Add translation handlers for six max/min MXU instructions. Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2019-01-03target/mips: MXU: Add handlers for logic instructionsAleksandar Markovic
Add translation handlers for four logic MXU instructions. It should be noted that there is an error in MXU documentation (dated June 2017) regarding opcodes for this group of instructions. This was confirmed by running tests on hardware, and also by looking up other related public source trees (binutils, Android NDK). In initial MXU patches to QEMU, opcodes for MXU logic instructions were created to be in accordance with the MXU documentation, therefore the error from was propagated. This patch corrects that, changing the involved code. Besides that, as MXU was designed and implemented only for 32-bit CPUs, corresponding preprosessor conditions were added around MXU code, which allows more flexible implementation of MXU handlers. Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2019-01-03target/mips: MXU: Improve the comment containing MXU overviewAleksandar Markovic
Improve textual description of MXU extension. These are mostly comment formatting changes. Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2019-01-03target/mips: MXU: Add generic naming for optn2 constantsAleksandar Markovic
Add generic naming involving generig suffixes OPTN0, OPTN1, OPTN2, OPTN3 for four optn2 constants. Existing suffixes WW, LW, HW, XW are not quite appropriate for some instructions using optn2. Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2019-01-03target/mips: MXU: Add missing opcodes/decoding for LX* instructionsAleksandar Markovic
Add missing opcodes and decoding engine for LXB, LXH, LXW, LXBU, and LXHU instructions. They were for some reason forgotten in previous commits. The MXU opcode list and decoding engine should be now complete. Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2019-01-03atomics: Set ATOMIC_REG_SIZE=8 for MIPS n32Paul Burton
ATOMIC_REG_SIZE is currently defined as the default sizeof(void *) for all MIPS host builds, including those using the n32 ABI. n32 is the MIPS64 ILP32 ABI and as such tcg/mips/tcg-target.h defines TCG_TARGET_REG_BITS as 64 for n32 builds. If we attempt to build QEMU for an n32 host with support for a 64b target architecture then TCG_OVERSIZED_GUEST is 0 and accel/tcg/cputlb.c attempts to use atomic_* functions. This fails because ATOMIC_REG_SIZE is 4, causing the calls to QEMU_BUILD_BUG_ON(sizeof(*ptr) > ATOMIC_REG_SIZE) in the various atomic_* functions to generate errors. Fix this by defining ATOMIC_REG_SIZE as 8 for all MIPS64 builds, which will cover both n32 (ILP32) & n64 (LP64) ABIs in much the same was as we already do for x86_64/x32. Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Paul Burton <pburton@wavecomp.com>
2019-01-03MAINTAINERS: Add Aleksandar Rikalo as a reviewer for MIPS contentAleksandar Markovic
Add Aleksandar Rikalo as a reviewer for MIPS content. Aleksandar brings to us more than six years of experience in working on a variety of development tools for MIPS architectures, and will greatly help QEMU community understand and support intricacies of MIPS better. Acked-by: Aleksandar Rikalo <arikalo@wavecomp.com> Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-06-19 03:57:32 +0000