aboutsummaryrefslogtreecommitdiff
path: root/.gitlab-ci.yml
AgeCommit message (Collapse)Author
2021-02-09gitlab-ci: remove redundant GitLab repo URL commandStefan Hajnoczi
It is no longer necessary to point .gitmodules at GitLab repos when running in GitLab CI since they are now used all the time. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20210111115017.156802-4-stefanha@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2021-01-27gitlab-ci.yml: Avoid recompiling the sources in the test jobsThomas Huth
Currently, our check-system-* jobs are recompiling the whole sources again. This happens due to the fact that the jobs are checking out the whole source tree and required submodules again, and only try to use the "build" directory with the binaries and object files as an artifact from the previous stage - which simply does not work right anymore (with the current version of meson). Due to some changed time stamps, meson/ninja are always trying to rebuild the whole tree. In the long run, we could likely use "meson test --no-rebuild", but there is still some work going on in that area to improve the user experience. So until this has been done, simply avoid recompiling the sources with a trick: pass NINJA=":" to the make process in the test jobs. Also check out the submodules manually before updating the timestamps in the build folder, so that the binaries are definitely newer that all the source files. This saves ca. 10 - 15 minutes of precious CI cycles in each run. Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20210126065757.403853-1-thuth@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2021-01-27gitlab-ci.yml: Exclude some redundant targets in build-without-default-featuresThomas Huth
The build-without-default-features job is running quite long and sometimes already hits the 1h time limit. Exclude some targets which do not provide additional test coverage here (since we e.g. also already test other targets of the same type, just with different endianess, or a 64-bit superset) to avoid that we hit the timeout here so easily. Message-Id: <20210126172345.15947-1-thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2021-01-26gitlab-ci.yml: Avoid some submodules to speed up the CI a little bitThomas Huth
Since the meson build system rework, the configure script prefers the git submodules over the system libraries. So we are testing compilation with capstone, fdt and libslirp as a submodule all over the place, burning CPU cycles by recompiling these third party modules and wasting some network bandwidth in the CI by cloning the submodules each time. Let's stop doing that in at least a couple of jobs and use the system libraries instead. While we're at it, also install meson in the Fedora container, since it is new enough already, so we do not need to check out the meson submodule here. Message-Id: <20210121174451.658924-1-thuth@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2021-01-26gitlab-ci: Test building linux-user targets on CentOS 7Philippe Mathieu-Daudé
Add a configuration tested by Peter Maydell (see [1] and [2]) but not covered in our CI [3]: [705/2910] Compiling C object libqemu-arm-linux-user.fa.p/linux-user_strace.c.o FAILED: libqemu-arm-linux-user.fa.p/linux-user_strace.c.o ../linux-user/strace.c: In function 'do_print_sockopt': ../linux-user/strace.c:2831:14: error: 'IPV6_ADDR_PREFERENCES' undeclared (first use in this function) case IPV6_ADDR_PREFERENCES: ^ This job currently takes 31 minutes 32 seconds ([4]). [1] https://lists.gnu.org/archive/html/qemu-devel/2021-01/msg05086.html [2] https://lists.gnu.org/archive/html/qemu-devel/2021-01/msg05379.html [3] https://gitlab.com/philmd/qemu/-/jobs/977408284 [4] https://gitlab.com/philmd/qemu/-/jobs/978223286 Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Message-Id: <20210121172829.1643620-3-f4bug@amsat.org> Signed-off-by: Thomas Huth <thuth@redhat.com>
2021-01-20gitlab-ci: Add alpine to pipelineJiaxun Yang
[thuth: Enable "make check" tests, too, after tests/check-block.sh got fixed] Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Message-Id: <20210118063808.12471-10-jiaxun.yang@flygoat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2021-01-19docs: Build and install all the docs in a single manualpull-target-arm-20210119-1Peter Maydell
When we first converted our documentation to Sphinx, we split it into multiple manuals (system, interop, tools, etc), which are all built separately. The primary driver for this was wanting to be able to avoid shipping the 'devel' manual to end-users. However, this is working against the grain of the way Sphinx wants to be used and causes some annoyances: * Cross-references between documents become much harder or possibly impossible * There is no single index to the whole documentation * Within one manual there's no links or table-of-contents info that lets you easily navigate to the others * The devel manual doesn't get published on the QEMU website (it would be nice to able to refer to it there) Merely hiding our developer documentation from end users seems like it's not enough benefit for these costs. Combine all the documentation into a single manual (the same way that the readthedocs site builds it) and install the whole thing. The previous manual divisions remain as the new top level sections in the manual. * The per-manual conf.py files are no longer needed * The man_pages[] specifications previously in each per-manual conf.py move to the top level conf.py * docs/meson.build logic is simplified as we now only need to run Sphinx once for the HTML and then once for the manpages5B * The old index.html.in that produced the top-level page with links to each manual is no longer needed Unfortunately this means that we now have to build the HTML documentation into docs/manual in the build tree rather than directly into docs/; otherwise it is too awkward to ensure we install only the built manual and not also the dependency info, stamp file, etc. The manual still ends up in the same place in the final installed directory, but anybody who was consulting documentation from within the build tree will have to adjust where they're looking. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 20210115154449.4801-1-peter.maydell@linaro.org
2021-01-18gitlab: migrate the minimal tools and unit tests from TravisAlex Bennée
These tests are good at shaking out missing stubs which otherwise work if we have built targets. Rather than create a new job just add the checks to the existing tools-and-docs build. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Willian Rampazzo <willianr@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20210114165730.31607-12-alex.bennee@linaro.org>
2021-01-18gitlab: move docs and tools build across from TravisAlex Bennée
While we are at it we might as well check the tag generation. For bonus points we run GNU globals htags into the public pages directory for publishing with the auto generated pages. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Reviewed-by: Willian Rampazzo <willianr@redhat.com> Acked-by: Thomas Huth <thuth@redhat.com> Message-Id: <20210114165730.31607-10-alex.bennee@linaro.org>
2021-01-11gitlab-ci.yml: Add openSUSE Leap 15.2 for gitlab CI/CDCho, Yu-Chen
Add build-system-opensuse jobs and opensuse-leap.docker dockerfile. Use openSUSE Leap 15.2 container image in the gitlab-CI. Signed-off-by: Cho, Yu-Chen <acho@suse.com> Tested-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Message-Id: <20201229085046.8536-1-acho@suse.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2021-01-02gitlab: add --without-default-features buildAlex Bennée
Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20201210190417.31673-8-alex.bennee@linaro.org>
2021-01-02gitlab: move --without-default-devices build from TravisAlex Bennée
Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Message-Id: <20201210190417.31673-7-alex.bennee@linaro.org>
2020-12-18gitlab-ci: Archive logs of acceptance testsWainer dos Santos Moschetta
Keep the logs of acceptance tests for two days on GitLab. If you want to make it available for more time, click on the 'Keep' button on the Job page at web UI. By default GitLab will archive artifacts only if the job succeed. Instead let's keep it on both success and failure, so it gives the opportunity to the developer/maintainer to check the error logs as well as to the logs of CANCEL tests (not shown on the job logs). Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Reviewed-by: Willian Rampazzo <willianr@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20201211183827.915232-4-wainersm@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-12-18gitlab-ci: Refactor code that show logs of failed acceptancesWainer dos Santos Moschetta
Replace the code (python) on after_script of the acceptance jobs that is currently used to show the logs of failed tests. Instead it is used the Avocado's testlogs plug-in which works likewise. Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Reviewed-by: Willian Rampazzo <willianr@redhat.com> Message-Id: <20201211183827.915232-3-wainersm@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-12-09Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell
pc,pci,virtio: fixes, cleanups Lots of fixes, cleanups. CPU hot-unplug improvements. A new AER property for virtio devices, adding a dummy AER capability. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Wed 09 Dec 2020 18:04:28 GMT # gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469 # gpg: issuer "mst@redhat.com" # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full] # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full] # Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67 # Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469 * remotes/mst/tags/for_upstream: (65 commits) hw/virtio-pci Added AER capability. hw/virtio-pci Added counter for pcie capabilities offsets. pcie_aer: Fix help message of pcie_aer_inject_error command x86: ich9: let firmware negotiate 'CPU hot-unplug with SMI' feature x86: ich9: factor out "guest_cpu_hotplug_features" tests/acpi: update expected files x86: acpi: let the firmware handle pending "CPU remove" events in SMM tests/acpi: allow expected files change x86: acpi: introduce AcpiPmInfo::smi_on_cpu_unplug acpi: cpuhp: introduce 'firmware performs eject' status/control bits hw/i386/pc: add max combined fw size as machine configuration option block/export: avoid g_return_val_if() input validation contrib/vhost-user-input: avoid g_return_val_if() input validation contrib/vhost-user-gpu: avoid g_return_val_if() input validation contrib/vhost-user-blk: avoid g_return_val_if() input validation .gitlab-ci: add build-libvhost-user libvhost-user: add a simple link test without glib libvhost-user: make it a meson subproject libvhost-user: drop qemu/osdep.h dependency libvhost-user: remove qemu/compiler.h usage ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-12-09.gitlab-ci: add build-libvhost-userMarc-André Lureau
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20201125100640.366523-9-marcandre.lureau@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-12-09gitlab-ci: Move coroutine tests across to gitlabPhilippe Mathieu-Daudé
Similarly to commit 8cdb2cef3f1, move the coroutine tests to GitLab. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20201108204535.2319870-13-philmd@redhat.com> Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com> [thuth: Replaced Travis by Gitlab-CI in comment] Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-12-09gitlab-ci: Move user-static test across to gitlabPhilippe Mathieu-Daudé
Similarly to commit 8cdb2cef3f1, move the user-static test to GitLab. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20201108204535.2319870-11-philmd@redhat.com> Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-12-09gitlab-ci: Update 'build-disabled' to cover all configurable optionsPhilippe Mathieu-Daudé
Add these missing options to the 'build-disabled' job: --disable-auth-pam (commit 8953caf3cd38) --disable-gcrypt (commit 91bfcdb01d48) --disable-keyring (commit 54e7aac05624) --disable-libudev (commit 5c53015a480b) --disable-opengl (commit da076ffed6b9) --disable-sparse (commit 03b4fe7de226) Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> [thuth: Dropped the unnecessary hunk with --disable-vhost-user-blk-server] Message-Id: <20201108204535.2319870-7-philmd@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-12-09gitlab-ci: Split CONFIGURE_ARGS one argument per line for build-disabledPhilippe Mathieu-Daudé
We will keep adding/removing options to our 'configure' script, so for easier maintainability it makes sense to have CONFIGURE_ARGS declared as one option per line. This way we can review diff easily (or rebase/cherry-pick). No logical change. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20201108204535.2319870-6-philmd@redhat.com> Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-12-09gitlab-ci: Document 'build-tcg-disabled' is a KVM X86 jobPhilippe Mathieu-Daudé
Document what this job cover (build X86 targets with KVM being the single accelerator available). Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20201207131503.3858889-2-philmd@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-11-23gitlab-ci: Move trace backend tests across to gitlabPhilippe Mathieu-Daudé
Similarly to commit 8cdb2cef3f1, move the trace backend tests to GitLab. Note the User-Space Tracer backend is still tested on Ubuntu by the s390x jobs on Travis-CI. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Acked-by: Thomas Huth <thuth@redhat.com> Message-Id: <20201111121234.3246812-3-philmd@redhat.com> Message-Id: <20201117173635.29101-7-alex.bennee@linaro.org>
2020-11-23gitlab: move remaining x86 check-tcg targets to gitlabAlex Bennée
The GCC check-tcg (user) test in particular was very prone to timing out on Travis. We only actually need to move the some-softmmu builds across as we already have coverage for linux-user. As --enable-debug-tcg does increase the run time somewhat as more debug is put in let's restrict that to just the plugins build. It's unlikely that a plugins enabled build is going to hide a sanity failure in core TCG code so let the plugin builds do the heavy lifting on checking TCG sanity so the non-plugin builds can run swiftly. Now the only remaining check-tcg builds on Travis are for the various non-x86 arches. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20201117173635.29101-5-alex.bennee@linaro.org>
2020-11-10gitlab: force enable docs build in Fedora, Ubuntu, DebianDaniel P. Berrangé
Meson runs a test to see if Sphinx works, and automatically disables it on error. This can lead to the CI jobs skipping docs build without maintainers noticing the problem. Use --enable-docs to force a fatal error if Sphinx doesn't work on the jobs where we expect it to be OK. Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Message-Id: <20201102130926.161183-3-berrange@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-11-10gitlab: publish the docs built during CIDaniel P. Berrangé
Most of the build jobs will create the sphinx documentation. If we expose this as an artifact of a "pages" job in a "public" directory, it will get published using GitLab Pages. This means a user can push a branch with docs changes to GitLab and view the results at https://yourusername.gitlab.io/qemu/ Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Message-Id: <20201102130926.161183-2-berrange@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-11-09gitlab-ci: Drop generic cache rulePhilippe Mathieu-Daudé
This cache rule is meant for Avocado artifacts, but affects all jobs. Moreover the 'acceptance_template' template already include a more detailled rule to cache artifacts. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20201108221925.2344515-2-philmd@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-10-27gitlab-ci: Clone from GitLab itselfPhilippe Mathieu-Daudé
Let GitLab runners use GitLab repository directly. Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20201022123302.2884788-1-philmd@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
2020-10-26tests/acceptance: Enable AVOCADO_ALLOW_UNTRUSTED_CODE in the gitlab-CIThomas Huth
The tests are running in containers here, so it should be OK to run with AVOCADO_ALLOW_UNTRUSTED_CODE enabled in this case. Message-Id: <20201023073351.251332-4-thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-10-17ci: include configure and meson logs in all jobs if configure failsPaolo Bonzini
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-13Merge remote-tracking branch ↵Peter Maydell
'remotes/huth-gitlab/tags/pull-request-2020-10-13' into staging * qtest improvements (test for crash found with the fuzzer, increase downtime in migration test, less verbose output when running w/o KVM) * Improve handling of acceptance tests in the Gitlab-CI * Run checkpatch.pl in the Gitlab-CI * Improve the gitlab-pipeline-status script * Misc patches (mark 'moxie' as deprecated, remove stale .gitignore files, ...) # gpg: Signature made Tue 13 Oct 2020 11:49:06 BST # gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5 # gpg: issuer "thuth@redhat.com" # gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full] # gpg: aka "Thomas Huth <thuth@redhat.com>" [full] # gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full] # gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown] # Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5 * remotes/huth-gitlab/tags/pull-request-2020-10-13: (23 commits) scripts/ci/gitlab-pipeline-status: wait for pipeline creation scripts/ci/gitlab-pipeline-status: use more descriptive exceptions scripts/ci/gitlab-pipeline-status: handle keyboard interrupts scripts/ci/gitlab-pipeline-status: refactor parser creation scripts/ci/gitlab-pipeline-status: give early feedback on running pipelines scripts/ci/gitlab-pipeline-status: improve message regarding timeout scripts/ci/gitlab-pipeline-status: make branch name configurable gitlab: assign python helper files to GitLab maintainers section gitlab: add a CI job to validate the DCO sign off gitlab: add a CI job for running checkpatch.pl configure: fixes indent of $meson setup docs/system/deprecated: Mark the 'moxie' CPU as deprecated Remove superfluous .gitignore files MAINTAINERS: Ignore bios-tables-test in the qtest section Add a comment in bios-tables-test.c to clarify the reason behind approach softmmu/vl: Be less verbose about missing KVM when running the qtests tests/migration: Allow longer timeouts qtest: add fuzz test case Acceptance tests: show test report on GitLab CI Acceptance tests: do not show canceled test logs on GitLab CI ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-10-13gitlab: add a CI job to validate the DCO sign offDaniel P. Berrangé
While checkpatch.pl can validate DCO sign off that job must always be advisory only since it is expected that certain patches will fail some code style rules. We require the DCO sign off to be mandatory for all commits though, so it benefits from being validated in a standalone job. Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Message-Id: <20200918132903.1848939-3-berrange@redhat.com> [thuth: Use "stage: build" to let it run earlier] Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-10-13gitlab: add a CI job for running checkpatch.plDaniel P. Berrangé
This job is advisory since it is expected that certain patches will fail the style checks and checkpatch.pl provides no way to mark exceptions to the rules. Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Message-Id: <20200918132903.1848939-2-berrange@redhat.com> [thuth: Use "stage: build" to let it run earlier] Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-10-13Acceptance tests: show test report on GitLab CICleber Rosa
Avocado will, by default, produce JUnit files. Let's ask GitLab to present those in the web UI. Signed-off-by: Cleber Rosa <crosa@redhat.com> Message-Id: <20201009205513.751968-4-crosa@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-10-13Acceptance tests: do not show canceled test logs on GitLab CICleber Rosa
Tests resulting in "CANCEL" in Avocado are usually canceled on purpose, and are almost identical to "SKIP". The logs for canceled tests are adding a lot of noise to the logs being shown on GitLab CI, and causing distraction from real failures. As a side note, this "after script" is scheduled for removal once the feature is implemented within Avocado itself. Reference: https://github.com/avocado-framework/avocado/issues/4266 Signed-off-by: Cleber Rosa <crosa@redhat.com> Message-Id: <20201009205513.751968-3-crosa@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-10-13gitlab-ci.yml: Only run one test-case per fuzzerAlexander Bulekov
With 1000 runs, there is a non-negligible chance that the fuzzer can trigger a crash. With this CI job, we care about catching build/runtime issues in the core fuzzing code. Actual device fuzzing takes place on oss-fuzz. For these purposes, only running one input should be sufficient. Signed-off-by: Alexander Bulekov <alxndr@bu.edu> Suggested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20201002143524.56930-1-alxndr@bu.edu> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Darren Kenny <darren.kenny@oracle.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-10-12qemu-iotests, qtest: rewrite test 067 as a qtestPaolo Bonzini
Test 067 from qemu-iotests is executing QMP commands to hotplug and hot-unplug disks, devices and blockdevs. Because the power of the text-based test harness is limited, it is actually limiting the checks that it does, for example by skipping DEVICE_DELETED events. tests/qtest already has a similar test, drive_del-test.c. We can merge them, and even reuse some of the existing code in drive_del-test.c. This will improve the quality of the test by covering DEVICE_DELETED events and testing multiple architectures (therefore covering multiple PCI hotplug mechanisms as well as s390x virtio-ccw). The only difference is that the new test will always use null-co:// for the medium rather than qcow2 or raw, but this should be irrelevant for what the test is covering. For example there are no "qemu-img check" runs in 067 that would check that the file is properly closed. The new tests requires PCI hot-plug support, so drive_del-test is moved from qemu-system-ppc to qemu-system-ppc64. Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-02gitlab: split deprecated job into build/check stagesAlex Bennée
While the job is pretty fast for only a few targets we still want to catch breakage of the build. By splitting the test step we can allow_failures for that while still ensuring we don't miss the build breaking. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20201002091538.3017-1-alex.bennee@linaro.org>
2020-10-02gitlab: move linux-user plugins test across to gitlabAlex Bennée
Even with the recent split moving beefier plugins into contrib and dropping them from the check-tcg tests we are still hitting time limits. This possibly points to a slow down of --debug-tcg but seeing as we are migrating stuff to gitlab we might as well move there and bump the timeout. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20201002103223.24022-1-alex.bennee@linaro.org>
2020-10-02gitlab-ci: Remove the Debian9-based containers and containers-layer3Thomas Huth
According to our support policy, Debian 9 is not supported by the QEMU project anymore. Since we now switched the MinGW cross-compiler builds to Fedora, we do not need these Debian9-based containers in the gitlab-CI anymore, and can now also get rid of the "layer3" container build stage this way. Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Message-Id: <20200921174320.46062-3-thuth@redhat.com> Message-Id: <20200925154027.12672-11-alex.bennee@linaro.org>
2020-09-16configure: add [lm32|unicore32]-softmmu to deprecation logicAlex Bennée
While we are at it move the few places where they are into the deprecation build bucket. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20200915134317.11110-9-alex.bennee@linaro.org>
2020-09-16gitlab: create a build-deprecated targetAlex Bennée
These targets might be deprecated but we should keep them building before the final axe comes down. Lets keep them all in one place and don't hold up the CI if they do fail. They are either poorly tested or already flaky anyway. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Acked-by: Thomas Huth <thuth@redhat.com> Message-Id: <20200915134317.11110-8-alex.bennee@linaro.org>
2020-09-07gitlab: expand test coverage for crypto buildsDaniel P. Berrangé
Most jobs test the latest nettle library. This adds explicit coverage for latest gcrypt using Fedora, and old gcrypt and nettle using CentOS-7. The latter does a minimal tools-only build, as we only need to validate that the crypto code builds and unit tests pass. Finally a job disabling both nettle and gcrypt is provided to validate that gnutls still works. Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Message-Id: <20200901133050.381844-3-berrange@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-09-07gitlab-ci: Add cross-compiling build testsThomas Huth
Now that we can use all our QEMU test containers in the gitlab-CI, we can easily add some jobs that test cross-compilation for various architectures. There is just only small ugliness: Since the shared runners on gitlab.com are single-threaded, we have to split each compilation job into two parts (--disable-user and --disable-system), and exclude some additional targets, to avoid that the jobs are running too long and hitting the timeout of 1 h. Message-Id: <20200823111757.72002-8-thuth@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-09-03gitlab-ci.yml: Set artifacts expiration timeThomas Huth
The default expiration time for artifacts seems to be very high (30 days?). Since we only need the artifacts to pass the binaries from one stage to the next one, we can decrease the expiration time to avoid to spam the file server too much. Two days should be enough in case someone still wants to have a look after the pipeline finished. Message-Id: <20200806161546.15325-1-thuth@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-09-03gitlab-ci.yml: Run check-qtest and check-unit at the end of the fuzzer jobThomas Huth
The fuzzer job finishes quite early, so we can run the unit tests and qtests with -fsanitize=address here without extending the total test time. Message-Id: <20200831153228.229185-1-thuth@redhat.com> Reviewed-by: Alexander Bulekov <alxndr@bu.edu> Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-09-03gitlab/travis: Rework the disabled features testsThomas Huth
Let's focus on the gitlab-ci when testing the compilation with disabled features, thus add more switches there (and while we're at it, sort them also alphabetically). This should cover the test from the Travis CI now, too, so that we can remove the now-redundant job from the Travis CI. Message-Id: <20200806155306.13717-1-thuth@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-08-21meson: link emulators without Makefile.targetPaolo Bonzini
The binaries move to the root directory, e.g. qemu-system-i386 or qemu-arm. This requires changes to qtests, CI, etc. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-08-05gitlab-ci: Fix Avocado cache usageThomas Huth
In commit 6957fd98dc ("gitlab: add avocado asset caching") we tried to save the Avocado cache (as in commit c1073e44b4 with Travis-CI) however it doesn't work as expected. For some reason Avocado uses /root/avocado_cache/ which we can not select later. Manually generate a Avocado config to force the use of the current job's directory. This patch is based on an earlier version from Philippe Mathieu-Daudé. Message-Id: <20200730141326.8260-5-thuth@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-08-05gitlab-ci.yml: Add build-system-debian and build-system-centos jobsThomas Huth
We were missing the two new targets avr-softmmu and rx-softmmu in the gitlab-CI so far, and did not add some of the "other endianess" targets like sh4eb-softmmu yet. Since the current build-system-* jobs run already for a very long time, let's do not add these missing targets there, but introduce two new additional build jobs, one running with Debian and one running with CentOS, and add the new targets there. Also move some targets from the old build-system-* jobs to these new targets, to distribute the load and reduce the runtime of the CI. Message-Id: <20200730141326.8260-4-thuth@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-07-21gitlab-ci.yml: Add oss-fuzz build testsAlexander Bulekov
This tries to build and run the fuzzers with the same build-script used by oss-fuzz. This doesn't guarantee that the builds on oss-fuzz will also succeed, since oss-fuzz provides its own compiler and fuzzer vars, but it can catch changes that are not compatible with the the ./scripts/oss-fuzz/build.sh script. The strange way of finding fuzzer binaries stems from the method used by oss-fuzz: https://github.com/google/oss-fuzz/blob/master/infra/base-images/base-runner/targets_list Signed-off-by: Alexander Bulekov <alxndr@bu.edu> Message-Id: <20200720073223.22945-1-thuth@redhat.com> [thuth: Tweak the "script" to make it work, exclude slirp test, etc.] Signed-off-by: Thomas Huth <thuth@redhat.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-04-28 09:19:30 +0000