aboutsummaryrefslogtreecommitdiff
path: root/.gitignore
AgeCommit message (Collapse)Author
2020-09-23Add *.pyc back to the .gitignore fileThomas Huth
Python still dumps its bytecode into the source directory, so we should continue to ignore the *.pyc files. Fixes: 0e72b7df4d ("Simplify the .gitignore file") Reported-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20200919101859.28739-1-thuth@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-09-16Simplify the .gitignore fileThomas Huth
Now that we always do out-of-tree builds (and the in-tree builds are faked via a "build" directory), we can simplify out .gitignore file quite a bit. Message-Id: <20200909080305.258961-1-thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-09-08configure: move disassembler configuration to mesonPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-08meson: compute config_all_devices directlyPaolo Bonzini
There is no need anymore to produce config-all-devices.mak, compute the resulting dictionary directly instead of going through grepy.sh. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-08-21rules.mak: drop unneeded macrosPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-08-21configure: add support for pseudo-"in source tree" buildsDaniel P. Berrangé
Meson requires the build dir to be separate from the source tree. Many people are used to just running "./configure && make" though and the meson conversion breaks that. This introduces some backcompat support to make it appear as if an "in source tree" build is being done, but with the results in the "build/" directory. This allows "./configure && make" to work as it did historically, albeit with the output binaries staying under build/. Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-08-21meson: rename included C source files to .c.incPaolo Bonzini
With Makefiles that have automatically generated dependencies, you generated includes are set as dependencies of the Makefile, so that they are built before everything else and they are available when first building the .c files. Alternatively you can use a fine-grained dependency, e.g. target/arm/translate.o: target/arm/decode-neon-shared.inc.c With Meson you have only one choice and it is a third option, namely "build at the beginning of the corresponding target"; the way you express it is to list the includes in the sources of that target. The problem is that Meson decides if something is a source vs. a generated include by looking at the extension: '.c', '.cc', '.m', '.C' are sources, while everything else is considered an include---including '.inc.c'. Use '.c.inc' to avoid this, as it is consistent with our other convention of using '.rst.inc' for included reStructuredText files. The editorconfig file is adjusted. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-08-21trace: switch position of headers to what Meson requiresPaolo Bonzini
Meson doesn't enjoy the same flexibility we have with Make in choosing the include path. In particular the tracing headers are using $(build_root)/$(<D). In order to keep the include directives unchanged, the simplest solution is to generate headers with patterns like "trace/trace-audio.h" and place forwarding headers in the source tree such that for example "audio/trace.h" includes "trace/trace-audio.h". This patch is too ugly to be applied to the Makefiles now. It's only a way to separate the changes to the tracing header files from the Meson rewrite of the tracing logic. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-07-11.gitignore: un-ignore .gitlab-ci.dAlex Bennée
The sooner we deprecate in-tree builds the sooner this mess of regexes can be thrown away. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200701135652.1366-19-alex.bennee@linaro.org>
2020-06-17.gitignore: Ignore storage-daemon filesRoman Bolshakov
The files are generated. Fixes: 2af282ec51a ("qemu-storage-daemon: Add --monitor option") Cc: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com> Message-Id: <20200612105830.17082-1-r.bolshakov@yadro.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-03-06docs: Stop building qemu-docPeter Maydell
Stop building the old texinfo qemu-doc; all its contents are now available in the Sphinx-generated manuals and manpages. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20200228153619.9906-32-peter.maydell@linaro.org
2020-01-23virtiofsd: add vhost-user.json fileStefan Hajnoczi
Install a vhost-user.json file describing virtiofsd. This allows libvirt and other management tools to enumerate vhost-user backend programs. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-01-14qapi: Generate command registration stuff into separate filesMarkus Armbruster
Having to include qapi-commands.h just for qmp_init_marshal() is suboptimal. Generate it into separate files. This lets monitor/misc.c, qga/main.c, and the generated qapi-commands-FOO.h include less. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20191120182551.23795-4-armbru@redhat.com> [Typos in docs/devel/qapi-code-gen.txt fixed] Reviewed-by: Eric Blake <eblake@redhat.com>
2019-09-19build: Don't ignore qapi-visit-core.cEric Blake
This file is version-controlled, and not generated from a .json file. Fixes: bf582c3461b Reported-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20190912184607.3507-1-eblake@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-08-21.gitignore: ignore some vhost-user* related filesMichal Privoznik
Commit d52c454aadc creates '/contrib/vhost-user-gpu/50-qemu-gpu.json' and '/vhost-user-gpu' and commit 06914c97d3a creates '/vhost-user-input' neither of which is ignored by git. Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <db150a03315a89a849ab9968e4a5a26110d41424.1562942402.git.mprivozn@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-04-17Makefile: install the edk2 firmware images and their descriptorsLaszlo Ersek
Decompress and install the edk2 firmware blobs as part of "make install", unless blob installation was disabled with configure's "--disable-blobs" option. Additionally, decompress the blobs as a pre-requisite for building softmmu binaries -- this is helpful for both "make check" and other ad-hoc tests one might want to run in the build directory. Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com>
2019-03-14.gitignore: ignore docs/built created for in-tree buildsStefano Garzarella
Commit 1290e6711 creates 'docs/built' for in-tree builds of Sphinx manuals but did not ignore it. Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20190314104622.101715-2-sgarzare@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-03-14maint: Ignore built elf2dmpEric Blake
Commit 3fa2d384 added a binary 'elf2dmp' but did not ignore it during an in-tree build. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Message-Id: <20190313144557.8845-1-eblake@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-03-07Makefile, configure: Support building rST documentationPeter Maydell
Add support to our configure and makefile machinery for building our rST docs into HTML files. Building the documentation now requires that sphinx-build is available; this seems better than allowing half the docs to be built if it is not present but having half of them missing. (In particular it means that assuming that distros configured with --enable-docs they'll get a helpful error from configure telling them the new build dependency.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Acked-by: Aleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190305172139.32662-10-peter.maydell@linaro.org Message-id: 20190228145624.24885-10-peter.maydell@linaro.org
2019-02-18qapi: Generate QAPIEvent stuff into separate filesMarkus Armbruster
Having to include qapi-events.h just for QAPIEvent is suboptimal, but quite tolerable now. It'll become problematic when we have events conditional on the target, because then qapi-events.h won't be usable from target-independent code anymore. Avoid that by generating it into separate files. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20190214152251.2073-6-armbru@redhat.com>
2019-02-05optionrom: add new PVH option romStefano Garzarella
The new pvh.bin option rom can be used with SeaBIOS to boot uncompressed kernel using the x86/HVM direct boot ABI. pvh.S contains the entry point of the option rom. It runs in real mode, loads the e820 table querying the BIOS, and then it switches to 32bit protected mode and jumps to the pvh_load_kernel() written in pvh_main.c. pvh_load_kernel() loads the cmdline and kernel entry_point using fw_cfg, then it looks for RSDP, fills the hvm_start_info required by x86/HVM ABI, and finally jumps to the kernel entry_point. Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Liam Merwick <liam.merwick@oracle.com>
2018-12-11qapi: Reduce Makefile boilerplateEric Blake
Adding a new qapi module had some rather tedious repetition to wire it into Makefile, Makefile.objs, and .gitignore (for example, see commit bf42508f and its followup b61acdec). For make, add some indirection by taking advantage of GNU Make string processing to expand a list of module names into all the required artifacts, so that future additions of a new module need only touch the list of module names. And for gitignore, use globs to cover all generated file names. The list has to live in Makefile.objs, due to the way that our unnest-vars macro slirps in that file without remembering any definition of $(QAPI_MODULES) from Makefile. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Tested-by: Yuval Shaia <yuval.shaia@oracle.com> Message-Id: <20181116200016.2080785-1-eblake@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2018-10-05edid: Ignore built binaryEric Blake
Added in commit 72d277a7. Signed-off-by: Eric Blake <eblake@redhat.com> Message-id: 20181004140522.945682-1-eblake@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-07-05.gitignore: add .gcov filesAlex Bennée
These are temporary files generated on gcov runs and shouldn't be included in the source tree. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2018-06-13block: Ignore generated job QAPI filesEric Blake
Commit bf42508f introduced new generated files; make sure they don't get accidentally committed from an in-tree build. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-id: 20180531212435.165261-1-eblake@redhat.com Signed-off-by: Jeff Cody <jcody@redhat.com>
2018-05-18target/arm: Add SVE decode skeletonRichard Henderson
Including only 4, as-yet unimplemented, instruction patterns so that the whole thing compiles. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180516223007.10256-3-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-03-02qapi: Don't create useless directory qapi-generatedMarkus Armbruster
We used to generate first test and later QGA QAPI code into qapi-generated/. Commit b93b63f574 moved the test code to tests/. Commit 54c2e50205 moved the QGA code to qga/qapi-generated/. The directory has been unused since. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180211093607.27351-30-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com> Signed-off-by: Eric Blake <eblake@redhat.com>
2018-03-02qapi: Move qapi-schema.json to qapi/, rename generated filesMarkus Armbruster
Move qapi-schema.json to qapi/, so it's next to its modules, and all files get generated to qapi/, not just the ones generated for modules. Consistently name the generated files qapi-MODULE.EXT: qmp-commands.[ch] become qapi-commands.[ch], qapi-event.[ch] become qapi-events.[ch], and qmp-introspect.[ch] become qapi-introspect.[ch]. This gets rid of the temporary hacks in scripts/qapi/commands.py, scripts/qapi/events.py, and scripts/qapi/common.py. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180211093607.27351-28-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com> [eblake: Fix trailing dot in tpm.c, undo temporary hack for OSX toolchain] Signed-off-by: Eric Blake <eblake@redhat.com>
2018-03-02qapi: Empty out qapi-schema.jsonMarkus Armbruster
The previous commit improved compile time by including less of the generated QAPI headers. This is impossible for stuff defined directly in qapi-schema.json, because that ends up in headers that that pull in everything. Move everything but include directives from qapi-schema.json to new sub-module qapi/misc.json, then include just the "misc" shard where possible. It's possible everywhere, except: * monitor.c needs qmp-command.h to get qmp_init_marshal() * monitor.c, ui/vnc.c and the generated qapi-event-FOO.c need qapi-event.h to get enum QAPIEvent Perhaps we'll get rid of those some other day. Adding a type to qapi/migration.json now recompiles some 120 instead of 2300 out of 5100 objects. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180211093607.27351-25-armbru@redhat.com> [eblake: rebase to master] Signed-off-by: Eric Blake <eblake@redhat.com>
2018-03-02qapi: Generate separate .h, .c for each moduleMarkus Armbruster
Our qapi-schema.json is composed of modules connected by include directives, but the generated code is monolithic all the same: one qapi-types.h with all the types, one qapi-visit.h with all the visitors, and so forth. These monolithic headers get included all over the place. In my "build everything" tree, adding a QAPI type recompiles about 4800 out of 5100 objects. We wouldn't write such monolithic headers by hand. It stands to reason that we shouldn't generate them, either. Split up generated qapi-types.h to mirror the schema's modular structure: one header per module. Name the main module's header qapi-types.h, and sub-module D/B.json's header D/qapi-types-B.h. Mirror the schema's includes in the headers, so that qapi-types.h gets you everything exactly as before. If you need less, you can include one or more of the sub-module headers. To be exploited shortly. Split up qapi-types.c, qapi-visit.h, qapi-visit.c, qmp-commands.h, qmp-commands.c, qapi-event.h, qapi-event.c the same way. qmp-introspect.h, qmp-introspect.c and qapi.texi remain monolithic. The split of qmp-commands.c duplicates static helper function qmp_marshal_output_str() in qapi-commands-char.c and qapi-commands-misc.c. This happens when commands returning the same type occur in multiple modules. Not worth avoiding. Since I'm going to rename qapi-event.[ch] to qapi-events.[ch], and qmp-commands.[ch] to qapi-commands.[ch], name the shards that way already, to reduce churn. This requires temporary hacks in commands.py and events.py. Similarly, c_name() must temporarily be taught to munge '/' in common.py. They'll go away with the rename. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180211093607.27351-23-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> [eblake: declare a dummy variable in each .c file, to shut up OSX toolchain warnings about empty .o files, including hacking c_name()] Signed-off-by: Eric Blake <eblake@redhat.com>
2018-03-02qapi/types qapi/visit: Generate built-in stuff into separate filesMarkus Armbruster
Linking code from multiple separate QAPI schemata into the same program is possible, but involves some weirdness around built-in types: * We generate code for built-in types into .c only with option --builtins. The user is responsible for generating code for exactly one QAPI schema per program with --builtins. * We generate code for built-in types into .h regardless of --builtins, but guarded by #ifndef QAPI_VISIT_BUILTIN. Because all copies of this code are exactly the same, including any combination of these headers works. Replace this contraption by something more conventional: generate code for built-in types into their very own files: qapi-builtin-types.c, qapi-builtin-visit.c, qapi-builtin-types.h, qapi-builtin-visit.h, but only with --builtins. Obey --output-dir, but ignore --prefix for them. Make qapi-types.h include qapi-builtin-types.h. With multiple schemata you now have multiple qapi-types.[ch], but only one qapi-builtin-types.[ch]. Same for qapi-visit.[ch] and qapi-builtin-visit.[ch]. Bonus: if all you need is built-in stuff, you can include a much smaller header. To be exploited shortly. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180211093607.27351-21-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com> [eblake: fix octal constant for python 3] Signed-off-by: Eric Blake <eblake@redhat.com>
2018-03-02qapi: Rename generated qmp-marshal.c to qmp-commands.cMarkus Armbruster
All generated .c are named like their .h, except for qmp-marshal.c and qmp-commands.h. To add to the confusion, tests-qmp-commands.c falsely matches generated test-qmp-commands.h. Get rid of this unnecessary complication. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180211093607.27351-19-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com> Signed-off-by: Eric Blake <eblake@redhat.com>
2018-03-02qapi-gen: New common driver for code and doc generatorsMarkus Armbruster
Whenever qapi-schema.json changes, we run six programs eleven times to update eleven files. Similar for qga/qapi-schema.json. This is silly. Replace the six programs by a single program that spits out all eleven files. The programs become modules in new Python package qapi, along with the helper library. This requires moving them to scripts/qapi/. While moving them, consistently drop executable mode bits. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20180211093607.27351-9-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com> [eblake: move change to one-line 'blurb' earlier in series, mention mode bit change as intentional, update qapi-code-gen.txt to match actual generated events.c file] Signed-off-by: Eric Blake <eblake@redhat.com>
2018-01-18contrib/vhost-user-blk: introduce a vhost-user-blk sample applicationChangpeng Liu
This commit introduces a vhost-user-blk backend device, it uses UNIX domain socket to communicate with QEMU. The vhost-user-blk sample application should be used with QEMU vhost-user-blk-pci device. To use it, complie with: make vhost-user-blk and start like this: vhost-user-blk -b /dev/sdb -s /path/vhost.socket Signed-off-by: Changpeng Liu <changpeng.liu@intel.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-12-18.gitignore: remove vscclientMarc-André Lureau
It was removed with libcacard, since: commit 7b02f5447c64d1854468f758398c9f6fe9e5721f Author: Marc-André Lureau <marcandre.lureau@redhat.com> Date: Sun Aug 30 11:48:40 2015 +0200 libcacard: use the standalone project Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2017-10-23ui: add qemu-keymap and shader to .gitignoreGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 20171020070914.7785-1-kraxel@redhat.com
2017-10-16ui: add keycodemapdb repository as a GIT submoduleDaniel P. Berrange
The https://gitlab.com/keycodemap/keycodemapdb/ repo contains a data file mapping between all the different scancode/keycode/keysym sets that are known, and a tool to auto-generate lookup tables for different combinations. It is used by GTK-VNC, SPICE-GTK and libvirt for mapping keys. Using it in QEMU will let us replace many hand written lookup tables with auto-generated tables from a master data source, reducing bugs. Adding new QKeyCodes will now only require the master table to be updated, all ~20 other tables will be automatically updated to follow. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 20170929101201.21039-4-berrange@redhat.com [ kraxel: fix build ] [ kraxel: switch repo to qemu.git mirror ] Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2017-10-16build: automatically handle GIT submodule checkout for dtcDaniel P. Berrange
Currently if DTC is required by configure and not available in the host OS install, we exit with an error message telling the user to checkout a git submodule or install the library. This introduces automatic handling of the git submodule checkout process and enables it for dtc. This only runs if building from GIT, so users of release tarballs still need the system library install. The current state of the git checkout is stashed in .git-submodule-status, and a helper program is used to determine if this state matches the desired submodule state. A dependency against 'Makefile' ensures that the submodule state is refreshed at the start of the build process Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 20170929101201.21039-2-berrange@redhat.com [ kraxel: use /bin/sh not bash for scripts/git-submodule.sh ] [ kraxel: fix Makefile dependencies ] Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> [fixup] Makefile dep
2017-09-29scsi: Ignore executable for in-tree buildsEric Blake
The new qemu-pr-helper (commit b855f8d17) should not be checked in, even when doing in-tree builds. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20170926151421.14557-1-eblake@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-22gitignore: Ignore vm test imagesFam Zheng
Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2017-07-19coccinelle: ignore ASTs pre-parsed cached C filesPhilippe Mathieu-Daudé
files generated using coccinelle tool: 'spatch --use-cache' Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20170718045540.16322-2-f4bug@amsat.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-06-15vhost-user-scsi: Introduce vhost-user-scsi host deviceFelipe Franciosi
This commit introduces a vhost-user device for SCSI. This is based on the existing vhost-scsi implementation, but done over vhost-user instead. It also uses a chardev to connect to the backend. Unlike vhost-scsi (today), VMs using vhost-user-scsi can be live migrated. To use it, start Qemu with a command line equivalent to: qemu-system-x86_64 \ -chardev socket,id=vus0,path=/tmp/vus.sock \ -device vhost-user-scsi-pci,chardev=vus0,bus=pci.0,addr=... A separate commit presents a sample application linked with libiscsi to provide a backend for vhost-user-scsi. Signed-off-by: Felipe Franciosi <felipe@nutanix.com> Message-Id: <1488479153-21203-4-git-send-email-felipe@nutanix.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-06-15docs: create interop/ subdirectoryPaolo Bonzini
This is for the future interoperability & management guide. It includes the QAPI docs, including the automatically generated ones, other socket protocols (vhost-user, VNC), and the qcow2 file format. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-03-16qapi: Clean up build of generated documentationMarkus Armbruster
Rename intermediate qemu-qapi.texi to qemu-qmp-qapi.texi to match its user qemu-qmp-ref.texi, just like qemu-ga-qapi.texi matches qemu-ga-ref.texi. Build the intermediate .texi next to the sources and the final output in docs/ instead of dumping them into the build root. Fix version.texi dependencies so that only the targets that actually need it depend on it. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <1489582656-31133-8-git-send-email-armbru@redhat.com>
2017-02-20Makefile: Put VERSION info into version.texi rather than using -DPeter Maydell
Unfortunately some older versions of makeinfo don't correctly handle the -D command line option and fail to set the variable. This then causes them to complain docs/qemu-ga-ref.texi:41: warning: undefined flag: VERSION Work around this by doing as the autotools do, and writing the information into a version.texi file which we then include from the .texi files that need it. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <1487357968-31000-1-git-send-email-peter.maydell@linaro.org> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2017-01-31trace: switch to modular code generation for sub-directoriesDaniel P. Berrange
Introduce rules in the top level Makefile that are able to generate trace.[ch] files in every subdirectory which has a trace-events file. The top level directory is handled specially, so instead of creating trace.h, it creates trace-root.h. This allows sub-directories to include the top level trace-root.h file, without ambiguity wrt to the trace.g file in the current sub-dir. Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 20170125161417.31949-7-berrange@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-01-16build-sys: add qapi doc generation targetsMarc-André Lureau
Generate and install the man, txt and html versions of QAPI documentation (generate and install qemu-doc.txt too). Add it also to optional pdf/info targets. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20170113144135.5150-22-marcandre.lureau@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2017-01-16build-sys: add txt documentation rulesMarc-André Lureau
Build plain text documentation, and install it. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20170113144135.5150-21-marcandre.lureau@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2017-01-16build-sys: remove dvi doc generationMarc-André Lureau
There is no clear reason to have rules to generate dvi format documentation, pdf is generally better supported nowadays. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20170113144135.5150-19-marcandre.lureau@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-12-22build-sys: remove libtool left-overMarc-André Lureau
Libtool support was removed in commit e999ee44349, there is a few left-over. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20161108070513.30274-1-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>