diff options
Diffstat (limited to 'linux-headers/linux/vhost.h')
| -rw-r--r-- | linux-headers/linux/vhost.h | 237 |
1 files changed, 123 insertions, 114 deletions
diff --git a/linux-headers/linux/vhost.h b/linux-headers/linux/vhost.h index c8a8fbeb81..bea6973906 100644 --- a/linux-headers/linux/vhost.h +++ b/linux-headers/linux/vhost.h @@ -11,94 +11,11 @@ * device configuration. */ +#include <linux/vhost_types.h> #include <linux/types.h> - #include <linux/ioctl.h> -#include <linux/virtio_config.h> -#include <linux/virtio_ring.h> - -struct vhost_vring_state { - unsigned int index; - unsigned int num; -}; - -struct vhost_vring_file { - unsigned int index; - int fd; /* Pass -1 to unbind from file. */ - -}; - -struct vhost_vring_addr { - unsigned int index; - /* Option flags. */ - unsigned int flags; - /* Flag values: */ - /* Whether log address is valid. If set enables logging. */ -#define VHOST_VRING_F_LOG 0 - - /* Start of array of descriptors (virtually contiguous) */ - __u64 desc_user_addr; - /* Used structure address. Must be 32 bit aligned */ - __u64 used_user_addr; - /* Available structure address. Must be 16 bit aligned */ - __u64 avail_user_addr; - /* Logging support. */ - /* Log writes to used structure, at offset calculated from specified - * address. Address must be 32 bit aligned. */ - __u64 log_guest_addr; -}; - -/* no alignment requirement */ -struct vhost_iotlb_msg { - __u64 iova; - __u64 size; - __u64 uaddr; -#define VHOST_ACCESS_RO 0x1 -#define VHOST_ACCESS_WO 0x2 -#define VHOST_ACCESS_RW 0x3 - __u8 perm; -#define VHOST_IOTLB_MISS 1 -#define VHOST_IOTLB_UPDATE 2 -#define VHOST_IOTLB_INVALIDATE 3 -#define VHOST_IOTLB_ACCESS_FAIL 4 - __u8 type; -}; - -#define VHOST_IOTLB_MSG 0x1 -#define VHOST_IOTLB_MSG_V2 0x2 - -struct vhost_msg { - int type; - union { - struct vhost_iotlb_msg iotlb; - __u8 padding[64]; - }; -}; - -struct vhost_msg_v2 { - __u32 type; - __u32 reserved; - union { - struct vhost_iotlb_msg iotlb; - __u8 padding[64]; - }; -}; - -struct vhost_memory_region { - __u64 guest_phys_addr; - __u64 memory_size; /* bytes */ - __u64 userspace_addr; - __u64 flags_padding; /* No flags are currently specified. */ -}; - -/* All region addresses and sizes must be 4K aligned. */ -#define VHOST_PAGE_SIZE 0x1000 - -struct vhost_memory { - __u32 nregions; - __u32 padding; - struct vhost_memory_region regions[0]; -}; + +#define VHOST_FILE_UNBIND -1 /* ioctls */ @@ -128,6 +45,25 @@ struct vhost_memory { #define VHOST_SET_LOG_BASE _IOW(VHOST_VIRTIO, 0x04, __u64) /* Specify an eventfd file descriptor to signal on log write. */ #define VHOST_SET_LOG_FD _IOW(VHOST_VIRTIO, 0x07, int) +/* By default, a device gets one vhost_worker that its virtqueues share. This + * command allows the owner of the device to create an additional vhost_worker + * for the device. It can later be bound to 1 or more of its virtqueues using + * the VHOST_ATTACH_VRING_WORKER command. + * + * This must be called after VHOST_SET_OWNER and the caller must be the owner + * of the device. The new thread will inherit caller's cgroups and namespaces, + * and will share the caller's memory space. The new thread will also be + * counted against the caller's RLIMIT_NPROC value. + * + * The worker's ID used in other commands will be returned in + * vhost_worker_state. + */ +#define VHOST_NEW_WORKER _IOR(VHOST_VIRTIO, 0x8, struct vhost_worker_state) +/* Free a worker created with VHOST_NEW_WORKER if it's not attached to any + * virtqueue. If userspace is not able to call this for workers its created, + * the kernel will free all the device's workers when the device is closed. + */ +#define VHOST_FREE_WORKER _IOW(VHOST_VIRTIO, 0x9, struct vhost_worker_state) /* Ring setup. */ /* Set number of descriptors in ring. This parameter can not @@ -153,6 +89,18 @@ struct vhost_memory { #define VHOST_VRING_BIG_ENDIAN 1 #define VHOST_SET_VRING_ENDIAN _IOW(VHOST_VIRTIO, 0x13, struct vhost_vring_state) #define VHOST_GET_VRING_ENDIAN _IOW(VHOST_VIRTIO, 0x14, struct vhost_vring_state) +/* Attach a vhost_worker created with VHOST_NEW_WORKER to one of the device's + * virtqueues. + * + * This will replace the virtqueue's existing worker. If the replaced worker + * is no longer attached to any virtqueues, it can be freed with + * VHOST_FREE_WORKER. + */ +#define VHOST_ATTACH_VRING_WORKER _IOW(VHOST_VIRTIO, 0x15, \ + struct vhost_vring_worker) +/* Return the vring worker's ID */ +#define VHOST_GET_VRING_WORKER _IOWR(VHOST_VIRTIO, 0x16, \ + struct vhost_vring_worker) /* The following ioctls use eventfd file descriptors to signal and poll * for events. */ @@ -172,9 +120,6 @@ struct vhost_memory { /* Set or get vhost backend capability */ -/* Use message type V2 */ -#define VHOST_BACKEND_F_IOTLB_MSG_V2 0x1 - #define VHOST_SET_BACKEND_FEATURES _IOW(VHOST_VIRTIO, 0x25, __u64) #define VHOST_GET_BACKEND_FEATURES _IOR(VHOST_VIRTIO, 0x26, __u64) @@ -186,31 +131,7 @@ struct vhost_memory { * device. This can be used to stop the ring (e.g. for migration). */ #define VHOST_NET_SET_BACKEND _IOW(VHOST_VIRTIO, 0x30, struct vhost_vring_file) -/* Feature bits */ -/* Log all write descriptors. Can be changed while device is active. */ -#define VHOST_F_LOG_ALL 26 -/* vhost-net should add virtio_net_hdr for RX, and strip for TX packets. */ -#define VHOST_NET_F_VIRTIO_NET_HDR 27 - -/* VHOST_SCSI specific definitions */ - -/* - * Used by QEMU userspace to ensure a consistent vhost-scsi ABI. - * - * ABI Rev 0: July 2012 version starting point for v3.6-rc merge candidate + - * RFC-v2 vhost-scsi userspace. Add GET_ABI_VERSION ioctl usage - * ABI Rev 1: January 2013. Ignore vhost_tpgt filed in struct vhost_scsi_target. - * All the targets under vhost_wwpn can be seen and used by guset. - */ - -#define VHOST_SCSI_ABI_VERSION 1 - -struct vhost_scsi_target { - int abi_version; - char vhost_wwpn[224]; /* TRANSPORT_IQN_LEN */ - unsigned short vhost_tpgt; - unsigned short reserved; -}; +/* VHOST_SCSI specific defines */ #define VHOST_SCSI_SET_ENDPOINT _IOW(VHOST_VIRTIO, 0x40, struct vhost_scsi_target) #define VHOST_SCSI_CLEAR_ENDPOINT _IOW(VHOST_VIRTIO, 0x41, struct vhost_scsi_target) @@ -225,4 +146,92 @@ struct vhost_scsi_target { #define VHOST_VSOCK_SET_GUEST_CID _IOW(VHOST_VIRTIO, 0x60, __u64) #define VHOST_VSOCK_SET_RUNNING _IOW(VHOST_VIRTIO, 0x61, int) +/* VHOST_VDPA specific defines */ + +/* Get the device id. The device ids follow the same definition of + * the device id defined in virtio-spec. + */ +#define VHOST_VDPA_GET_DEVICE_ID _IOR(VHOST_VIRTIO, 0x70, __u32) +/* Get and set the status. The status bits follow the same definition + * of the device status defined in virtio-spec. + */ +#define VHOST_VDPA_GET_STATUS _IOR(VHOST_VIRTIO, 0x71, __u8) +#define VHOST_VDPA_SET_STATUS _IOW(VHOST_VIRTIO, 0x72, __u8) +/* Get and set the device config. The device config follows the same + * definition of the device config defined in virtio-spec. + */ +#define VHOST_VDPA_GET_CONFIG _IOR(VHOST_VIRTIO, 0x73, \ + struct vhost_vdpa_config) +#define VHOST_VDPA_SET_CONFIG _IOW(VHOST_VIRTIO, 0x74, \ + struct vhost_vdpa_config) +/* Enable/disable the ring. */ +#define VHOST_VDPA_SET_VRING_ENABLE _IOW(VHOST_VIRTIO, 0x75, \ + struct vhost_vring_state) +/* Get the max ring size. */ +#define VHOST_VDPA_GET_VRING_NUM _IOR(VHOST_VIRTIO, 0x76, __u16) + +/* Set event fd for config interrupt*/ +#define VHOST_VDPA_SET_CONFIG_CALL _IOW(VHOST_VIRTIO, 0x77, int) + +/* Get the valid iova range */ +#define VHOST_VDPA_GET_IOVA_RANGE _IOR(VHOST_VIRTIO, 0x78, \ + struct vhost_vdpa_iova_range) +/* Get the config size */ +#define VHOST_VDPA_GET_CONFIG_SIZE _IOR(VHOST_VIRTIO, 0x79, __u32) + +/* Get the count of all virtqueues */ +#define VHOST_VDPA_GET_VQS_COUNT _IOR(VHOST_VIRTIO, 0x80, __u32) + +/* Get the number of virtqueue groups. */ +#define VHOST_VDPA_GET_GROUP_NUM _IOR(VHOST_VIRTIO, 0x81, __u32) + +/* Get the number of address spaces. */ +#define VHOST_VDPA_GET_AS_NUM _IOR(VHOST_VIRTIO, 0x7A, unsigned int) + +/* Get the group for a virtqueue: read index, write group in num, + * The virtqueue index is stored in the index field of + * vhost_vring_state. The group for this specific virtqueue is + * returned via num field of vhost_vring_state. + */ +#define VHOST_VDPA_GET_VRING_GROUP _IOWR(VHOST_VIRTIO, 0x7B, \ + struct vhost_vring_state) +/* Set the ASID for a virtqueue group. The group index is stored in + * the index field of vhost_vring_state, the ASID associated with this + * group is stored at num field of vhost_vring_state. + */ +#define VHOST_VDPA_SET_GROUP_ASID _IOW(VHOST_VIRTIO, 0x7C, \ + struct vhost_vring_state) + +/* Suspend a device so it does not process virtqueue requests anymore + * + * After the return of ioctl the device must preserve all the necessary state + * (the virtqueue vring base plus the possible device specific states) that is + * required for restoring in the future. The device must not change its + * configuration after that point. + */ +#define VHOST_VDPA_SUSPEND _IO(VHOST_VIRTIO, 0x7D) + +/* Resume a device so it can resume processing virtqueue requests + * + * After the return of this ioctl the device will have restored all the + * necessary states and it is fully operational to continue processing the + * virtqueue descriptors. + */ +#define VHOST_VDPA_RESUME _IO(VHOST_VIRTIO, 0x7E) + +/* Get the group for the descriptor table including driver & device areas + * of a virtqueue: read index, write group in num. + * The virtqueue index is stored in the index field of vhost_vring_state. + * The group ID of the descriptor table for this specific virtqueue + * is returned via num field of vhost_vring_state. + */ +#define VHOST_VDPA_GET_VRING_DESC_GROUP _IOWR(VHOST_VIRTIO, 0x7F, \ + struct vhost_vring_state) + +/* Get the queue size of a specific virtqueue. + * userspace set the vring index in vhost_vring_state.index + * kernel set the queue size in vhost_vring_state.num + */ +#define VHOST_VDPA_GET_VRING_SIZE _IOWR(VHOST_VIRTIO, 0x80, \ + struct vhost_vring_state) #endif |