diff options
Diffstat (limited to 'hw/usb/xlnx-versal-usb2-ctrl-regs.c')
| -rw-r--r-- | hw/usb/xlnx-versal-usb2-ctrl-regs.c | 229 |
1 files changed, 229 insertions, 0 deletions
diff --git a/hw/usb/xlnx-versal-usb2-ctrl-regs.c b/hw/usb/xlnx-versal-usb2-ctrl-regs.c new file mode 100644 index 0000000000..9eaa59ebb8 --- /dev/null +++ b/hw/usb/xlnx-versal-usb2-ctrl-regs.c @@ -0,0 +1,229 @@ +/* + * QEMU model of the VersalUsb2CtrlRegs Register control/Status block for + * USB2.0 controller + * + * This module should control phy_reset, permanent device plugs, frame length + * time adjust & setting of coherency paths. None of which are emulated in + * present model. + * + * Copyright (c) 2020 Xilinx Inc. Vikram Garhwal <fnu.vikram@xilinx.com> + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include "qemu/osdep.h" +#include "hw/sysbus.h" +#include "hw/irq.h" +#include "hw/register.h" +#include "qemu/bitops.h" +#include "qemu/log.h" +#include "qom/object.h" +#include "migration/vmstate.h" +#include "hw/usb/xlnx-versal-usb2-ctrl-regs.h" + +#ifndef XILINX_VERSAL_USB2_CTRL_REGS_ERR_DEBUG +#define XILINX_VERSAL_USB2_CTRL_REGS_ERR_DEBUG 0 +#endif + +REG32(BUS_FILTER, 0x30) + FIELD(BUS_FILTER, BYPASS, 0, 4) +REG32(PORT, 0x34) + FIELD(PORT, HOST_SMI_BAR_WR, 4, 1) + FIELD(PORT, HOST_SMI_PCI_CMD_REG_WR, 3, 1) + FIELD(PORT, HOST_MSI_ENABLE, 2, 1) + FIELD(PORT, PWR_CTRL_PRSNT, 1, 1) + FIELD(PORT, HUB_PERM_ATTACH, 0, 1) +REG32(JITTER_ADJUST, 0x38) + FIELD(JITTER_ADJUST, FLADJ, 0, 6) +REG32(BIGENDIAN, 0x40) + FIELD(BIGENDIAN, ENDIAN_GS, 0, 1) +REG32(COHERENCY, 0x44) + FIELD(COHERENCY, USB_COHERENCY, 0, 1) +REG32(XHC_BME, 0x48) + FIELD(XHC_BME, XHC_BME, 0, 1) +REG32(REG_CTRL, 0x60) + FIELD(REG_CTRL, SLVERR_ENABLE, 0, 1) +REG32(IR_STATUS, 0x64) + FIELD(IR_STATUS, HOST_SYS_ERR, 1, 1) + FIELD(IR_STATUS, ADDR_DEC_ERR, 0, 1) +REG32(IR_MASK, 0x68) + FIELD(IR_MASK, HOST_SYS_ERR, 1, 1) + FIELD(IR_MASK, ADDR_DEC_ERR, 0, 1) +REG32(IR_ENABLE, 0x6c) + FIELD(IR_ENABLE, HOST_SYS_ERR, 1, 1) + FIELD(IR_ENABLE, ADDR_DEC_ERR, 0, 1) +REG32(IR_DISABLE, 0x70) + FIELD(IR_DISABLE, HOST_SYS_ERR, 1, 1) + FIELD(IR_DISABLE, ADDR_DEC_ERR, 0, 1) +REG32(USB3, 0x78) + +static void ir_update_irq(VersalUsb2CtrlRegs *s) +{ + bool pending = s->regs[R_IR_STATUS] & ~s->regs[R_IR_MASK]; + qemu_set_irq(s->irq_ir, pending); +} + +static void ir_status_postw(RegisterInfo *reg, uint64_t val64) +{ + VersalUsb2CtrlRegs *s = XILINX_VERSAL_USB2_CTRL_REGS(reg->opaque); + /* + * TODO: This should also clear USBSTS.HSE field in USB XHCI register. + * May be combine both the modules. + */ + ir_update_irq(s); +} + +static uint64_t ir_enable_prew(RegisterInfo *reg, uint64_t val64) +{ + VersalUsb2CtrlRegs *s = XILINX_VERSAL_USB2_CTRL_REGS(reg->opaque); + uint32_t val = val64; + + s->regs[R_IR_MASK] &= ~val; + ir_update_irq(s); + return 0; +} + +static uint64_t ir_disable_prew(RegisterInfo *reg, uint64_t val64) +{ + VersalUsb2CtrlRegs *s = XILINX_VERSAL_USB2_CTRL_REGS(reg->opaque); + uint32_t val = val64; + + s->regs[R_IR_MASK] |= val; + ir_update_irq(s); + return 0; +} + +static const RegisterAccessInfo usb2_ctrl_regs_regs_info[] = { + { .name = "BUS_FILTER", .addr = A_BUS_FILTER, + .rsvd = 0xfffffff0, + },{ .name = "PORT", .addr = A_PORT, + .rsvd = 0xffffffe0, + },{ .name = "JITTER_ADJUST", .addr = A_JITTER_ADJUST, + .reset = 0x20, + .rsvd = 0xffffffc0, + },{ .name = "BIGENDIAN", .addr = A_BIGENDIAN, + .rsvd = 0xfffffffe, + },{ .name = "COHERENCY", .addr = A_COHERENCY, + .rsvd = 0xfffffffe, + },{ .name = "XHC_BME", .addr = A_XHC_BME, + .reset = 0x1, + .rsvd = 0xfffffffe, + },{ .name = "REG_CTRL", .addr = A_REG_CTRL, + .rsvd = 0xfffffffe, + },{ .name = "IR_STATUS", .addr = A_IR_STATUS, + .rsvd = 0xfffffffc, + .w1c = 0x3, + .post_write = ir_status_postw, + },{ .name = "IR_MASK", .addr = A_IR_MASK, + .reset = 0x3, + .rsvd = 0xfffffffc, + .ro = 0x3, + },{ .name = "IR_ENABLE", .addr = A_IR_ENABLE, + .rsvd = 0xfffffffc, + .pre_write = ir_enable_prew, + },{ .name = "IR_DISABLE", .addr = A_IR_DISABLE, + .rsvd = 0xfffffffc, + .pre_write = ir_disable_prew, + },{ .name = "USB3", .addr = A_USB3, + } +}; + +static void usb2_ctrl_regs_reset_init(Object *obj, ResetType type) +{ + VersalUsb2CtrlRegs *s = XILINX_VERSAL_USB2_CTRL_REGS(obj); + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(s->regs_info); ++i) { + register_reset(&s->regs_info[i]); + } +} + +static void usb2_ctrl_regs_reset_hold(Object *obj) +{ + VersalUsb2CtrlRegs *s = XILINX_VERSAL_USB2_CTRL_REGS(obj); + + ir_update_irq(s); +} + +static const MemoryRegionOps usb2_ctrl_regs_ops = { + .read = register_read_memory, + .write = register_write_memory, + .endianness = DEVICE_LITTLE_ENDIAN, + .valid = { + .min_access_size = 4, + .max_access_size = 4, + }, +}; + +static void usb2_ctrl_regs_init(Object *obj) +{ + VersalUsb2CtrlRegs *s = XILINX_VERSAL_USB2_CTRL_REGS(obj); + SysBusDevice *sbd = SYS_BUS_DEVICE(obj); + RegisterInfoArray *reg_array; + + memory_region_init(&s->iomem, obj, TYPE_XILINX_VERSAL_USB2_CTRL_REGS, + USB2_REGS_R_MAX * 4); + reg_array = + register_init_block32(DEVICE(obj), usb2_ctrl_regs_regs_info, + ARRAY_SIZE(usb2_ctrl_regs_regs_info), + s->regs_info, s->regs, + &usb2_ctrl_regs_ops, + XILINX_VERSAL_USB2_CTRL_REGS_ERR_DEBUG, + USB2_REGS_R_MAX * 4); + memory_region_add_subregion(&s->iomem, + 0x0, + ®_array->mem); + sysbus_init_mmio(sbd, &s->iomem); + sysbus_init_irq(sbd, &s->irq_ir); +} + +static const VMStateDescription vmstate_usb2_ctrl_regs = { + .name = TYPE_XILINX_VERSAL_USB2_CTRL_REGS, + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_UINT32_ARRAY(regs, VersalUsb2CtrlRegs, USB2_REGS_R_MAX), + VMSTATE_END_OF_LIST(), + } +}; + +static void usb2_ctrl_regs_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + ResettableClass *rc = RESETTABLE_CLASS(klass); + + rc->phases.enter = usb2_ctrl_regs_reset_init; + rc->phases.hold = usb2_ctrl_regs_reset_hold; + dc->vmsd = &vmstate_usb2_ctrl_regs; +} + +static const TypeInfo usb2_ctrl_regs_info = { + .name = TYPE_XILINX_VERSAL_USB2_CTRL_REGS, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(VersalUsb2CtrlRegs), + .class_init = usb2_ctrl_regs_class_init, + .instance_init = usb2_ctrl_regs_init, +}; + +static void usb2_ctrl_regs_register_types(void) +{ + type_register_static(&usb2_ctrl_regs_info); +} + +type_init(usb2_ctrl_regs_register_types) |