diff options
Diffstat (limited to 'docs')
| -rw-r--r-- | docs/system/arm/integratorcp.rst | 16 | ||||
| -rw-r--r-- | docs/system/arm/musicpal.rst | 19 | ||||
| -rw-r--r-- | docs/system/arm/nseries.rst | 33 | ||||
| -rw-r--r-- | docs/system/arm/palm.rst | 23 | ||||
| -rw-r--r-- | docs/system/arm/realview.rst | 34 | ||||
| -rw-r--r-- | docs/system/arm/stellaris.rst | 26 | ||||
| -rw-r--r-- | docs/system/arm/sx1.rst | 18 | ||||
| -rw-r--r-- | docs/system/arm/versatile.rst | 29 | ||||
| -rw-r--r-- | docs/system/arm/xscale.rst | 29 | ||||
| -rw-r--r-- | docs/system/target-arm.rst | 225 |
10 files changed, 240 insertions, 212 deletions
diff --git a/docs/system/arm/integratorcp.rst b/docs/system/arm/integratorcp.rst new file mode 100644 index 0000000000..3232b43a08 --- /dev/null +++ b/docs/system/arm/integratorcp.rst @@ -0,0 +1,16 @@ +Integrator/CP (``integratorcp``) +================================ + +The ARM Integrator/CP board is emulated with the following devices: + +- ARM926E, ARM1026E, ARM946E, ARM1136 or Cortex-A8 CPU + +- Two PL011 UARTs + +- SMC 91c111 Ethernet adapter + +- PL110 LCD controller + +- PL050 KMI with PS/2 keyboard and mouse. + +- PL181 MultiMedia Card Interface with SD card. diff --git a/docs/system/arm/musicpal.rst b/docs/system/arm/musicpal.rst new file mode 100644 index 0000000000..35c2221248 --- /dev/null +++ b/docs/system/arm/musicpal.rst @@ -0,0 +1,19 @@ +Freecom MusicPal (``musicpal``) +=============================== + +The Freecom MusicPal internet radio emulation includes the following +elements: + +- Marvell MV88W8618 ARM core. + +- 32 MB RAM, 256 KB SRAM, 8 MB flash. + +- Up to 2 16550 UARTs + +- MV88W8xx8 Ethernet controller + +- MV88W8618 audio controller, WM8750 CODEC and mixer + +- 128x64 display with brightness control + +- 2 buttons, 2 navigation wheels with button function diff --git a/docs/system/arm/nseries.rst b/docs/system/arm/nseries.rst new file mode 100644 index 0000000000..b000b6d13b --- /dev/null +++ b/docs/system/arm/nseries.rst @@ -0,0 +1,33 @@ +Nokia N800 and N810 tablets (``n800``, ``n810``) +================================================ + +Nokia N800 and N810 internet tablets (known also as RX-34 and RX-44 / +48) emulation supports the following elements: + +- Texas Instruments OMAP2420 System-on-chip (ARM 1136 core) + +- RAM and non-volatile OneNAND Flash memories + +- Display connected to EPSON remote framebuffer chip and OMAP on-chip + display controller and a LS041y3 MIPI DBI-C controller + +- TI TSC2301 (in N800) and TI TSC2005 (in N810) touchscreen + controllers driven through SPI bus + +- National Semiconductor LM8323-controlled qwerty keyboard driven + through |I2C| bus + +- Secure Digital card connected to OMAP MMC/SD host + +- Three OMAP on-chip UARTs and on-chip STI debugging console + +- Mentor Graphics \"Inventra\" dual-role USB controller embedded in a + TI TUSB6010 chip - only USB host mode is supported + +- TI TMP105 temperature sensor driven through |I2C| bus + +- TI TWL92230C power management companion with an RTC on + |I2C| bus + +- Nokia RETU and TAHVO multi-purpose chips with an RTC, connected + through CBUS diff --git a/docs/system/arm/palm.rst b/docs/system/arm/palm.rst new file mode 100644 index 0000000000..0eabf63e0e --- /dev/null +++ b/docs/system/arm/palm.rst @@ -0,0 +1,23 @@ +Palm Tungsten|E PDA (``cheetah``) +================================= + +The Palm Tungsten|E PDA (codename \"Cheetah\") emulation includes the +following elements: + +- Texas Instruments OMAP310 System-on-chip (ARM 925T core) + +- ROM and RAM memories (ROM firmware image can be loaded with + -option-rom) + +- On-chip LCD controller + +- On-chip Real Time Clock + +- TI TSC2102i touchscreen controller / analog-digital converter / + Audio CODEC, connected through MicroWire and |I2S| busses + +- GPIO-connected matrix keypad + +- Secure Digital card connected to OMAP MMC/SD host + +- Three on-chip UARTs diff --git a/docs/system/arm/realview.rst b/docs/system/arm/realview.rst new file mode 100644 index 0000000000..8e08eb5da1 --- /dev/null +++ b/docs/system/arm/realview.rst @@ -0,0 +1,34 @@ +Arm Realview boards (``realview-eb``, ``realview-eb-mpcore``, ``realview-pb-a8``, ``realview-pbx-a9``) +====================================================================================================== + +Several variants of the ARM RealView baseboard are emulated, including +the EB, PB-A8 and PBX-A9. Due to interactions with the bootloader, only +certain Linux kernel configurations work out of the box on these boards. + +Kernels for the PB-A8 board should have CONFIG_REALVIEW_HIGH_PHYS_OFFSET +enabled in the kernel, and expect 512M RAM. Kernels for The PBX-A9 board +should have CONFIG_SPARSEMEM enabled, CONFIG_REALVIEW_HIGH_PHYS_OFFSET +disabled and expect 1024M RAM. + +The following devices are emulated: + +- ARM926E, ARM1136, ARM11MPCore, Cortex-A8 or Cortex-A9 MPCore CPU + +- ARM AMBA Generic/Distributed Interrupt Controller + +- Four PL011 UARTs + +- SMC 91c111 or SMSC LAN9118 Ethernet adapter + +- PL110 LCD controller + +- PL050 KMI with PS/2 keyboard and mouse + +- PCI host bridge + +- PCI OHCI USB controller + +- LSI53C895A PCI SCSI Host Bus Adapter with hard disk and CD-ROM + devices + +- PL181 MultiMedia Card Interface with SD card. diff --git a/docs/system/arm/stellaris.rst b/docs/system/arm/stellaris.rst new file mode 100644 index 0000000000..8af4ad79c7 --- /dev/null +++ b/docs/system/arm/stellaris.rst @@ -0,0 +1,26 @@ +Stellaris boards (``lm3s6965evb``, ``lm3s811evb``) +================================================== + +The Luminary Micro Stellaris LM3S811EVB emulation includes the following +devices: + +- Cortex-M3 CPU core. + +- 64k Flash and 8k SRAM. + +- Timers, UARTs, ADC and |I2C| interface. + +- OSRAM Pictiva 96x16 OLED with SSD0303 controller on + |I2C| bus. + +The Luminary Micro Stellaris LM3S6965EVB emulation includes the +following devices: + +- Cortex-M3 CPU core. + +- 256k Flash and 64k SRAM. + +- Timers, UARTs, ADC, |I2C| and SSI interfaces. + +- OSRAM Pictiva 128x64 OLED with SSD0323 controller connected via + SSI. diff --git a/docs/system/arm/sx1.rst b/docs/system/arm/sx1.rst new file mode 100644 index 0000000000..321993bc09 --- /dev/null +++ b/docs/system/arm/sx1.rst @@ -0,0 +1,18 @@ +Siemens SX1 (``sx1``, ``sx1-v1``) +================================= + +The Siemens SX1 models v1 and v2 (default) basic emulation. The +emulation includes the following elements: + +- Texas Instruments OMAP310 System-on-chip (ARM 925T core) + +- ROM and RAM memories (ROM firmware image can be loaded with + -pflash) V1 1 Flash of 16MB and 1 Flash of 8MB V2 1 Flash of 32MB + +- On-chip LCD controller + +- On-chip Real Time Clock + +- Secure Digital card connected to OMAP MMC/SD host + +- Three on-chip UARTs diff --git a/docs/system/arm/versatile.rst b/docs/system/arm/versatile.rst new file mode 100644 index 0000000000..48b6ca0a02 --- /dev/null +++ b/docs/system/arm/versatile.rst @@ -0,0 +1,29 @@ +Arm Versatile boards (``versatileab``, ``versatilepb``) +======================================================= + +The ARM Versatile baseboard is emulated with the following devices: + +- ARM926E, ARM1136 or Cortex-A8 CPU + +- PL190 Vectored Interrupt Controller + +- Four PL011 UARTs + +- SMC 91c111 Ethernet adapter + +- PL110 LCD controller + +- PL050 KMI with PS/2 keyboard and mouse. + +- PCI host bridge. Note the emulated PCI bridge only provides access + to PCI memory space. It does not provide access to PCI IO space. This + means some devices (eg. ne2k_pci NIC) are not usable, and others (eg. + rtl8139 NIC) are only usable when the guest drivers use the memory + mapped control registers. + +- PCI OHCI USB controller. + +- LSI53C895A PCI SCSI Host Bus Adapter with hard disk and CD-ROM + devices. + +- PL181 MultiMedia Card Interface with SD card. diff --git a/docs/system/arm/xscale.rst b/docs/system/arm/xscale.rst new file mode 100644 index 0000000000..19da2eff35 --- /dev/null +++ b/docs/system/arm/xscale.rst @@ -0,0 +1,29 @@ +Sharp XScale-based PDA models (``akita``, ``borzoi``, ``spitz``, ``terrier``) +============================================================================= + +The XScale-based clamshell PDA models (\"Spitz\", \"Akita\", \"Borzoi\" +and \"Terrier\") emulation includes the following peripherals: + +- Intel PXA270 System-on-chip (ARM V5TE core) + +- NAND Flash memory + +- IBM/Hitachi DSCM microdrive in a PXA PCMCIA slot - not in \"Akita\" + +- On-chip OHCI USB controller + +- On-chip LCD controller + +- On-chip Real Time Clock + +- TI ADS7846 touchscreen controller on SSP bus + +- Maxim MAX1111 analog-digital converter on |I2C| bus + +- GPIO-connected keyboard controller and LEDs + +- Secure Digital card connected to PXA MMC/SD host + +- Three on-chip UARTs + +- WM8750 audio CODEC on |I2C| and |I2S| busses diff --git a/docs/system/target-arm.rst b/docs/system/target-arm.rst index d2a3b44ce8..c7df6fc1f9 100644 --- a/docs/system/target-arm.rst +++ b/docs/system/target-arm.rst @@ -3,215 +3,16 @@ ARM System emulator ------------------- -Use the executable ``qemu-system-arm`` to simulate a ARM machine. The -ARM Integrator/CP board is emulated with the following devices: - -- ARM926E, ARM1026E, ARM946E, ARM1136 or Cortex-A8 CPU - -- Two PL011 UARTs - -- SMC 91c111 Ethernet adapter - -- PL110 LCD controller - -- PL050 KMI with PS/2 keyboard and mouse. - -- PL181 MultiMedia Card Interface with SD card. - -The ARM Versatile baseboard is emulated with the following devices: - -- ARM926E, ARM1136 or Cortex-A8 CPU - -- PL190 Vectored Interrupt Controller - -- Four PL011 UARTs - -- SMC 91c111 Ethernet adapter - -- PL110 LCD controller - -- PL050 KMI with PS/2 keyboard and mouse. - -- PCI host bridge. Note the emulated PCI bridge only provides access - to PCI memory space. It does not provide access to PCI IO space. This - means some devices (eg. ne2k_pci NIC) are not usable, and others (eg. - rtl8139 NIC) are only usable when the guest drivers use the memory - mapped control registers. - -- PCI OHCI USB controller. - -- LSI53C895A PCI SCSI Host Bus Adapter with hard disk and CD-ROM - devices. - -- PL181 MultiMedia Card Interface with SD card. - -Several variants of the ARM RealView baseboard are emulated, including -the EB, PB-A8 and PBX-A9. Due to interactions with the bootloader, only -certain Linux kernel configurations work out of the box on these boards. - -Kernels for the PB-A8 board should have CONFIG_REALVIEW_HIGH_PHYS_OFFSET -enabled in the kernel, and expect 512M RAM. Kernels for The PBX-A9 board -should have CONFIG_SPARSEMEM enabled, CONFIG_REALVIEW_HIGH_PHYS_OFFSET -disabled and expect 1024M RAM. - -The following devices are emulated: - -- ARM926E, ARM1136, ARM11MPCore, Cortex-A8 or Cortex-A9 MPCore CPU - -- ARM AMBA Generic/Distributed Interrupt Controller - -- Four PL011 UARTs - -- SMC 91c111 or SMSC LAN9118 Ethernet adapter - -- PL110 LCD controller - -- PL050 KMI with PS/2 keyboard and mouse - -- PCI host bridge - -- PCI OHCI USB controller - -- LSI53C895A PCI SCSI Host Bus Adapter with hard disk and CD-ROM - devices - -- PL181 MultiMedia Card Interface with SD card. - -The XScale-based clamshell PDA models (\"Spitz\", \"Akita\", \"Borzoi\" -and \"Terrier\") emulation includes the following peripherals: - -- Intel PXA270 System-on-chip (ARM V5TE core) - -- NAND Flash memory - -- IBM/Hitachi DSCM microdrive in a PXA PCMCIA slot - not in \"Akita\" - -- On-chip OHCI USB controller - -- On-chip LCD controller - -- On-chip Real Time Clock - -- TI ADS7846 touchscreen controller on SSP bus - -- Maxim MAX1111 analog-digital converter on |I2C| bus - -- GPIO-connected keyboard controller and LEDs - -- Secure Digital card connected to PXA MMC/SD host - -- Three on-chip UARTs - -- WM8750 audio CODEC on |I2C| and |I2S| busses - -The Palm Tungsten|E PDA (codename \"Cheetah\") emulation includes the -following elements: - -- Texas Instruments OMAP310 System-on-chip (ARM 925T core) - -- ROM and RAM memories (ROM firmware image can be loaded with - -option-rom) - -- On-chip LCD controller - -- On-chip Real Time Clock - -- TI TSC2102i touchscreen controller / analog-digital converter / - Audio CODEC, connected through MicroWire and |I2S| busses - -- GPIO-connected matrix keypad - -- Secure Digital card connected to OMAP MMC/SD host - -- Three on-chip UARTs - -Nokia N800 and N810 internet tablets (known also as RX-34 and RX-44 / -48) emulation supports the following elements: - -- Texas Instruments OMAP2420 System-on-chip (ARM 1136 core) - -- RAM and non-volatile OneNAND Flash memories - -- Display connected to EPSON remote framebuffer chip and OMAP on-chip - display controller and a LS041y3 MIPI DBI-C controller - -- TI TSC2301 (in N800) and TI TSC2005 (in N810) touchscreen - controllers driven through SPI bus - -- National Semiconductor LM8323-controlled qwerty keyboard driven - through |I2C| bus - -- Secure Digital card connected to OMAP MMC/SD host - -- Three OMAP on-chip UARTs and on-chip STI debugging console - -- Mentor Graphics \"Inventra\" dual-role USB controller embedded in a - TI TUSB6010 chip - only USB host mode is supported - -- TI TMP105 temperature sensor driven through |I2C| bus - -- TI TWL92230C power management companion with an RTC on - |I2C| bus - -- Nokia RETU and TAHVO multi-purpose chips with an RTC, connected - through CBUS - -The Luminary Micro Stellaris LM3S811EVB emulation includes the following -devices: - -- Cortex-M3 CPU core. - -- 64k Flash and 8k SRAM. - -- Timers, UARTs, ADC and |I2C| interface. - -- OSRAM Pictiva 96x16 OLED with SSD0303 controller on - |I2C| bus. - -The Luminary Micro Stellaris LM3S6965EVB emulation includes the -following devices: - -- Cortex-M3 CPU core. - -- 256k Flash and 64k SRAM. - -- Timers, UARTs, ADC, |I2C| and SSI interfaces. - -- OSRAM Pictiva 128x64 OLED with SSD0323 controller connected via - SSI. - -The Freecom MusicPal internet radio emulation includes the following -elements: - -- Marvell MV88W8618 ARM core. - -- 32 MB RAM, 256 KB SRAM, 8 MB flash. - -- Up to 2 16550 UARTs - -- MV88W8xx8 Ethernet controller - -- MV88W8618 audio controller, WM8750 CODEC and mixer - -- 128x64 display with brightness control - -- 2 buttons, 2 navigation wheels with button function - -The Siemens SX1 models v1 and v2 (default) basic emulation. The -emulation includes the following elements: - -- Texas Instruments OMAP310 System-on-chip (ARM 925T core) - -- ROM and RAM memories (ROM firmware image can be loaded with - -pflash) V1 1 Flash of 16MB and 1 Flash of 8MB V2 1 Flash of 32MB - -- On-chip LCD controller - -- On-chip Real Time Clock - -- Secure Digital card connected to OMAP MMC/SD host - -- Three on-chip UARTs - -A Linux 2.6 test image is available on the QEMU web site. More -information is available in the QEMU mailing-list archive. +Use the executable ``qemu-system-arm`` to simulate a ARM machine. + +.. toctree:: + + arm/integratorcp + arm/versatile + arm/realview + arm/xscale + arm/palm + arm/nseries + arm/stellaris + arm/musicpal + arm/sx1 |