9 files changed, 227 insertions, 0 deletions
diff --git a/docs/system/arm/integratorcp.rst b/docs/system/arm/integratorcp.rst
new file mode 100644
index 0000000000..3232b43a08
--- /dev/null
+++ b/docs/system/arm/integratorcp.rst
@@ -0,0 +1,16 @@
+Integrator/CP (``integratorcp``)
+================================
+
+The ARM Integrator/CP board is emulated with the following devices:
+
+-  ARM926E, ARM1026E, ARM946E, ARM1136 or Cortex-A8 CPU
+
+-  Two PL011 UARTs
+
+-  SMC 91c111 Ethernet adapter
+
+-  PL110 LCD controller
+
+-  PL050 KMI with PS/2 keyboard and mouse.
+
+-  PL181 MultiMedia Card Interface with SD card.
diff --git a/docs/system/arm/musicpal.rst b/docs/system/arm/musicpal.rst
new file mode 100644
index 0000000000..35c2221248
--- /dev/null
+++ b/docs/system/arm/musicpal.rst
@@ -0,0 +1,19 @@
+Freecom MusicPal (``musicpal``)
+===============================
+
+The Freecom MusicPal internet radio emulation includes the following
+elements:
+
+-  Marvell MV88W8618 ARM core.
+
+-  32 MB RAM, 256 KB SRAM, 8 MB flash.
+
+-  Up to 2 16550 UARTs
+
+-  MV88W8xx8 Ethernet controller
+
+-  MV88W8618 audio controller, WM8750 CODEC and mixer
+
+-  128x64 display with brightness control
+
+-  2 buttons, 2 navigation wheels with button function
diff --git a/docs/system/arm/nseries.rst b/docs/system/arm/nseries.rst
new file mode 100644
index 0000000000..b000b6d13b
--- /dev/null
+++ b/docs/system/arm/nseries.rst
@@ -0,0 +1,33 @@
+Nokia N800 and N810 tablets (``n800``, ``n810``)
+================================================
+
+Nokia N800 and N810 internet tablets (known also as RX-34 and RX-44 /
+48) emulation supports the following elements:
+
+-  Texas Instruments OMAP2420 System-on-chip (ARM 1136 core)
+
+-  RAM and non-volatile OneNAND Flash memories
+
+-  Display connected to EPSON remote framebuffer chip and OMAP on-chip
+   display controller and a LS041y3 MIPI DBI-C controller
+
+-  TI TSC2301 (in N800) and TI TSC2005 (in N810) touchscreen
+   controllers driven through SPI bus
+
+-  National Semiconductor LM8323-controlled qwerty keyboard driven
+   through |I2C| bus
+
+-  Secure Digital card connected to OMAP MMC/SD host
+
+-  Three OMAP on-chip UARTs and on-chip STI debugging console
+
+-  Mentor Graphics \"Inventra\" dual-role USB controller embedded in a
+   TI TUSB6010 chip - only USB host mode is supported
+
+-  TI TMP105 temperature sensor driven through |I2C| bus
+
+-  TI TWL92230C power management companion with an RTC on
+   |I2C| bus
+
+-  Nokia RETU and TAHVO multi-purpose chips with an RTC, connected
+   through CBUS
diff --git a/docs/system/arm/palm.rst b/docs/system/arm/palm.rst
new file mode 100644
index 0000000000..0eabf63e0e
--- /dev/null
+++ b/docs/system/arm/palm.rst
@@ -0,0 +1,23 @@
+Palm Tungsten|E PDA (``cheetah``)
+=================================
+
+The Palm Tungsten|E PDA (codename \"Cheetah\") emulation includes the
+following elements:
+
+-  Texas Instruments OMAP310 System-on-chip (ARM 925T core)
+
+-  ROM and RAM memories (ROM firmware image can be loaded with
+   -option-rom)
+
+-  On-chip LCD controller
+
+-  On-chip Real Time Clock
+
+-  TI TSC2102i touchscreen controller / analog-digital converter /
+   Audio CODEC, connected through MicroWire and |I2S| busses
+
+-  GPIO-connected matrix keypad
+
+-  Secure Digital card connected to OMAP MMC/SD host
+
+-  Three on-chip UARTs
diff --git a/docs/system/arm/realview.rst b/docs/system/arm/realview.rst
new file mode 100644
index 0000000000..8e08eb5da1
--- /dev/null
+++ b/docs/system/arm/realview.rst
@@ -0,0 +1,34 @@
+Arm Realview boards (``realview-eb``, ``realview-eb-mpcore``, ``realview-pb-a8``, ``realview-pbx-a9``)
+======================================================================================================
+
+Several variants of the ARM RealView baseboard are emulated, including
+the EB, PB-A8 and PBX-A9. Due to interactions with the bootloader, only
+certain Linux kernel configurations work out of the box on these boards.
+
+Kernels for the PB-A8 board should have CONFIG_REALVIEW_HIGH_PHYS_OFFSET
+enabled in the kernel, and expect 512M RAM. Kernels for The PBX-A9 board
+should have CONFIG_SPARSEMEM enabled, CONFIG_REALVIEW_HIGH_PHYS_OFFSET
+disabled and expect 1024M RAM.
+
+The following devices are emulated:
+
+-  ARM926E, ARM1136, ARM11MPCore, Cortex-A8 or Cortex-A9 MPCore CPU
+
+-  ARM AMBA Generic/Distributed Interrupt Controller
+
+-  Four PL011 UARTs
+
+-  SMC 91c111 or SMSC LAN9118 Ethernet adapter
+
+-  PL110 LCD controller
+
+-  PL050 KMI with PS/2 keyboard and mouse
+
+-  PCI host bridge
+
+-  PCI OHCI USB controller
+
+-  LSI53C895A PCI SCSI Host Bus Adapter with hard disk and CD-ROM
+   devices
+
+-  PL181 MultiMedia Card Interface with SD card.
diff --git a/docs/system/arm/stellaris.rst b/docs/system/arm/stellaris.rst
new file mode 100644
index 0000000000..8af4ad79c7
--- /dev/null
+++ b/docs/system/arm/stellaris.rst
@@ -0,0 +1,26 @@
+Stellaris boards (``lm3s6965evb``, ``lm3s811evb``)
+==================================================
+
+The Luminary Micro Stellaris LM3S811EVB emulation includes the following
+devices:
+
+-  Cortex-M3 CPU core.
+
+-  64k Flash and 8k SRAM.
+
+-  Timers, UARTs, ADC and |I2C| interface.
+
+-  OSRAM Pictiva 96x16 OLED with SSD0303 controller on
+   |I2C| bus.
+
+The Luminary Micro Stellaris LM3S6965EVB emulation includes the
+following devices:
+
+-  Cortex-M3 CPU core.
+
+-  256k Flash and 64k SRAM.
+
+-  Timers, UARTs, ADC, |I2C| and SSI interfaces.
+
+-  OSRAM Pictiva 128x64 OLED with SSD0323 controller connected via
+   SSI.
diff --git a/docs/system/arm/sx1.rst b/docs/system/arm/sx1.rst
new file mode 100644
index 0000000000..321993bc09
--- /dev/null
+++ b/docs/system/arm/sx1.rst
@@ -0,0 +1,18 @@
+Siemens SX1 (``sx1``, ``sx1-v1``)
+=================================
+
+The Siemens SX1 models v1 and v2 (default) basic emulation. The
+emulation includes the following elements:
+
+-  Texas Instruments OMAP310 System-on-chip (ARM 925T core)
+
+-  ROM and RAM memories (ROM firmware image can be loaded with
+   -pflash) V1 1 Flash of 16MB and 1 Flash of 8MB V2 1 Flash of 32MB
+
+-  On-chip LCD controller
+
+-  On-chip Real Time Clock
+
+-  Secure Digital card connected to OMAP MMC/SD host
+
+-  Three on-chip UARTs
diff --git a/docs/system/arm/versatile.rst b/docs/system/arm/versatile.rst
new file mode 100644
index 0000000000..48b6ca0a02
--- /dev/null
+++ b/docs/system/arm/versatile.rst
@@ -0,0 +1,29 @@
+Arm Versatile boards (``versatileab``, ``versatilepb``)
+=======================================================
+
+The ARM Versatile baseboard is emulated with the following devices:
+
+-  ARM926E, ARM1136 or Cortex-A8 CPU
+
+-  PL190 Vectored Interrupt Controller
+
+-  Four PL011 UARTs
+
+-  SMC 91c111 Ethernet adapter
+
+-  PL110 LCD controller
+
+-  PL050 KMI with PS/2 keyboard and mouse.
+
+-  PCI host bridge. Note the emulated PCI bridge only provides access
+   to PCI memory space. It does not provide access to PCI IO space. This
+   means some devices (eg. ne2k_pci NIC) are not usable, and others (eg.
+   rtl8139 NIC) are only usable when the guest drivers use the memory
+   mapped control registers.
+
+-  PCI OHCI USB controller.
+
+-  LSI53C895A PCI SCSI Host Bus Adapter with hard disk and CD-ROM
+   devices.
+
+-  PL181 MultiMedia Card Interface with SD card.
diff --git a/docs/system/arm/xscale.rst b/docs/system/arm/xscale.rst
new file mode 100644
index 0000000000..19da2eff35
--- /dev/null
+++ b/docs/system/arm/xscale.rst
@@ -0,0 +1,29 @@
+Sharp XScale-based PDA models (``akita``, ``borzoi``, ``spitz``, ``terrier``)
+=============================================================================
+
+The XScale-based clamshell PDA models (\"Spitz\", \"Akita\", \"Borzoi\"
+and \"Terrier\") emulation includes the following peripherals:
+
+-  Intel PXA270 System-on-chip (ARM V5TE core)
+
+-  NAND Flash memory
+
+-  IBM/Hitachi DSCM microdrive in a PXA PCMCIA slot - not in \"Akita\"
+
+-  On-chip OHCI USB controller
+
+-  On-chip LCD controller
+
+-  On-chip Real Time Clock
+
+-  TI ADS7846 touchscreen controller on SSP bus
+
+-  Maxim MAX1111 analog-digital converter on |I2C| bus
+
+-  GPIO-connected keyboard controller and LEDs
+
+-  Secure Digital card connected to PXA MMC/SD host
+
+-  Three on-chip UARTs
+
+-  WM8750 audio CODEC on |I2C| and |I2S| busses