aboutsummaryrefslogtreecommitdiff
path: root/docs/COLO-FT.txt
diff options
context:
space:
mode:
Diffstat (limited to 'docs/COLO-FT.txt')
-rw-r--r--docs/COLO-FT.txt189
1 files changed, 189 insertions, 0 deletions
diff --git a/docs/COLO-FT.txt b/docs/COLO-FT.txt
new file mode 100644
index 0000000000..628293824c
--- /dev/null
+++ b/docs/COLO-FT.txt
@@ -0,0 +1,189 @@
+COarse-grained LOck-stepping Virtual Machines for Non-stop Service
+----------------------------------------
+Copyright (c) 2016 Intel Corporation
+Copyright (c) 2016 HUAWEI TECHNOLOGIES CO., LTD.
+Copyright (c) 2016 Fujitsu, Corp.
+
+This work is licensed under the terms of the GNU GPL, version 2 or later.
+See the COPYING file in the top-level directory.
+
+This document gives an overview of COLO's design and how to use it.
+
+== Background ==
+Virtual machine (VM) replication is a well known technique for providing
+application-agnostic software-implemented hardware fault tolerance,
+also known as "non-stop service".
+
+COLO (COarse-grained LOck-stepping) is a high availability solution.
+Both primary VM (PVM) and secondary VM (SVM) run in parallel. They receive the
+same request from client, and generate response in parallel too.
+If the response packets from PVM and SVM are identical, they are released
+immediately. Otherwise, a VM checkpoint (on demand) is conducted.
+
+== Architecture ==
+
+The architecture of COLO is shown in the diagram below.
+It consists of a pair of networked physical nodes:
+The primary node running the PVM, and the secondary node running the SVM
+to maintain a valid replica of the PVM.
+PVM and SVM execute in parallel and generate output of response packets for
+client requests according to the application semantics.
+
+The incoming packets from the client or external network are received by the
+primary node, and then forwarded to the secondary node, so that both the PVM
+and the SVM are stimulated with the same requests.
+
+COLO receives the outbound packets from both the PVM and SVM and compares them
+before allowing the output to be sent to clients.
+
+The SVM is qualified as a valid replica of the PVM, as long as it generates
+identical responses to all client requests. Once the differences in the outputs
+are detected between the PVM and SVM, COLO withholds transmission of the
+outbound packets until it has successfully synchronized the PVM state to the SVM.
+
+ Primary Node Secondary Node
+ +------------+ +-----------------------+ +------------------------+ +------------+
+ | | | HeartBeat |<----->| HeartBeat | | |
+ | Primary VM | +-----------|-----------+ +-----------|------------+ |Secondary VM|
+ | | | | | |
+ | | +-----------|-----------+ +-----------|------------+ | |
+ | | |QEMU +---v----+ | |QEMU +----v---+ | | |
+ | | | |Failover| | | |Failover| | | |
+ | | | +--------+ | | +--------+ | | |
+ | | | +---------------+ | | +---------------+ | | |
+ | | | | VM Checkpoint |-------------->| VM Checkpoint | | | |
+ | | | +---------------+ | | +---------------+ | | |
+ | | | | | | | |
+ |Requests<---------------------------^------------------------------------------>Requests|
+ |Responses----------------------\ /--|--------------\ /------------------------Responses|
+ | | | | | | | | | | | | |
+ | | | +-----------+ | | | | | | | +------------+ | | |
+ | | | | COLO disk | | | | | | | | | COLO disk | | | |
+ | | | | Manager |-|-|--|--------------|--|->| Manager | | | |
+ | | | +|----------+ | | | | | | | +-----------|+ | | |
+ | | | | | | | | | | | | | | |
+ +------------+ +--|------------|-|--|--+ +---|--|--------------|--+ +------------+
+ | | | | | | |
+ +-------------+ | +----------v-v--|--+ +---|--v-----------+ | +-------------+
+ | VM Monitor | | | COLO Proxy | | COLO Proxy | | | VM Monitor |
+ | | | |(compare packet) | | (adjust sequence)| | | |
+ +-------------+ | +----------|----^--+ +------------------+ | +-------------+
+ | | | |
+ +------------------|------------|----|--+ +---------------------|------------------+
+ | Kernel | | | | | Kernel | |
+ +------------------|------------|----|--+ +---------------------|------------------+
+ | | | |
+ +--------------v+ +--------v----|--+ +------------------+ +v-------------+
+ | Storage | |External Network| | External Network | | Storage |
+ +---------------+ +----------------+ +------------------+ +--------------+
+
+== Components introduction ==
+
+You can see there are several components in COLO's diagram of architecture.
+Their functions are described below.
+
+HeartBeat:
+Runs on both the primary and secondary nodes, to periodically check platform
+availability. When the primary node suffers a hardware fail-stop failure,
+the heartbeat stops responding, the secondary node will trigger a failover
+as soon as it determines the absence.
+
+COLO disk Manager:
+When primary VM writes data into image, the colo disk manger captures this data
+and sends it to secondary VM's which makes sure the context of secondary VM's
+image is consistent with the context of primary VM 's image.
+For more details, please refer to docs/block-replication.txt.
+
+Checkpoint/Failover Controller:
+Modifications of save/restore flow to realize continuous migration,
+to make sure the state of VM in Secondary side is always consistent with VM in
+Primary side.
+
+COLO Proxy:
+Delivers packets to Primary and Seconday, and then compare the responses from
+both side. Then decide whether to start a checkpoint according to some rules.
+Please refer to docs/colo-proxy.txt for more informations.
+
+Note:
+HeartBeat has not been implemented yet, so you need to trigger failover process
+by using 'x-colo-lost-heartbeat' command.
+
+== Test procedure ==
+1. Startup qemu
+Primary:
+# qemu-kvm -enable-kvm -m 2048 -smp 2 -qmp stdio -vnc :7 -name primary \
+ -device piix3-usb-uhci \
+ -device usb-tablet -netdev tap,id=hn0,vhost=off \
+ -device virtio-net-pci,id=net-pci0,netdev=hn0 \
+ -drive if=virtio,id=primary-disk0,driver=quorum,read-pattern=fifo,vote-threshold=1,\
+ children.0.file.filename=1.raw,\
+ children.0.driver=raw -S
+Secondary:
+# qemu-kvm -enable-kvm -m 2048 -smp 2 -qmp stdio -vnc :7 -name secondary \
+ -device piix3-usb-uhci \
+ -device usb-tablet -netdev tap,id=hn0,vhost=off \
+ -device virtio-net-pci,id=net-pci0,netdev=hn0 \
+ -drive if=none,id=secondary-disk0,file.filename=1.raw,driver=raw,node-name=node0 \
+ -drive if=virtio,id=active-disk0,driver=replication,mode=secondary,\
+ file.driver=qcow2,top-id=active-disk0,\
+ file.file.filename=/mnt/ramfs/active_disk.img,\
+ file.backing.driver=qcow2,\
+ file.backing.file.filename=/mnt/ramfs/hidden_disk.img,\
+ file.backing.backing=secondary-disk0 \
+ -incoming tcp:0:8888
+
+2. On Secondary VM's QEMU monitor, issue command
+{'execute':'qmp_capabilities'}
+{ 'execute': 'nbd-server-start',
+ 'arguments': {'addr': {'type': 'inet', 'data': {'host': 'xx.xx.xx.xx', 'port': '8889'} } }
+}
+{'execute': 'nbd-server-add', 'arguments': {'device': 'secondeary-disk0', 'writable': true } }
+
+Note:
+ a. The qmp command nbd-server-start and nbd-server-add must be run
+ before running the qmp command migrate on primary QEMU
+ b. Active disk, hidden disk and nbd target's length should be the
+ same.
+ c. It is better to put active disk and hidden disk in ramdisk.
+
+3. On Primary VM's QEMU monitor, issue command:
+{'execute':'qmp_capabilities'}
+{ 'execute': 'human-monitor-command',
+ 'arguments': {'command-line': 'drive_add -n buddy driver=replication,mode=primary,file.driver=nbd,file.host=xx.xx.xx.xx,file.port=8889,file.export=secondary-disk0,node-name=nbd_client0'}}
+{ 'execute':'x-blockdev-change', 'arguments':{'parent': 'primary-disk0', 'node': 'nbd_client0' } }
+{ 'execute': 'migrate-set-capabilities',
+ 'arguments': {'capabilities': [ {'capability': 'x-colo', 'state': true } ] } }
+{ 'execute': 'migrate', 'arguments': {'uri': 'tcp:xx.xx.xx.xx:8888' } }
+
+ Note:
+ a. There should be only one NBD Client for each primary disk.
+ b. xx.xx.xx.xx is the secondary physical machine's hostname or IP
+ c. The qmp command line must be run after running qmp command line in
+ secondary qemu.
+
+4. After the above steps, you will see, whenever you make changes to PVM, SVM will be synced.
+You can issue command '{ "execute": "migrate-set-parameters" , "arguments":{ "x-checkpoint-delay": 2000 } }'
+to change the checkpoint period time
+
+5. Failover test
+You can kill Primary VM and run 'x_colo_lost_heartbeat' in Secondary VM's
+monitor at the same time, then SVM will failover and client will not detect this
+change.
+
+Before issuing '{ "execute": "x-colo-lost-heartbeat" }' command, we have to
+issue block related command to stop block replication.
+Primary:
+ Remove the nbd child from the quorum:
+ { 'execute': 'x-blockdev-change', 'arguments': {'parent': 'colo-disk0', 'child': 'children.1'}}
+ { 'execute': 'human-monitor-command','arguments': {'command-line': 'drive_del blk-buddy0'}}
+ Note: there is no qmp command to remove the blockdev now
+
+Secondary:
+ The primary host is down, so we should do the following thing:
+ { 'execute': 'nbd-server-stop' }
+
+== TODO ==
+1. Support continuous VM replication.
+2. Support shared storage.
+3. Develop the heartbeat part.
+4. Reduce checkpoint VM’s downtime while doing checkpoint.